Which of the following is the most wear resistant grade of carbide used for the cutting tools? (A) Aluminium carbide (B) Tungsten carbide (C) Nickel carbide (D) Iron carbide

Which of the following is the most wear resistant grade of carbide used
for the cutting tools?
(A) Aluminium carbide
(B) Tungsten carbide
(C) Nickel carbide
(D) Iron carbide
by

1 Answer

Answer :

Option B
by

Related questions

Which of the following is the most wear resistant grade of carbide used for the cutting tools? (A) Aluminium carbide (B) Tungsten carbide (C) Nickel carbide (D) Iron carbid

Description : Which of the following is the most wear resistant grade of carbide used for the cutting tools? (A) Aluminium carbide (B) Tungsten carbide (C) Nickel carbide (D) Iron carbid

Last Answer : Option B

Carbide tipped cutting tools are manufactured by powder metallurgy techniques and have a composition of (A) 90% tungsten carbide and 10% cobalt (B) 70% aluminium oxide & 30% silica (C) 30% nickel, 15% chromium & 55% tungsten (D) 65% tungsten & 35% zirconium

Description : Carbide tipped cutting tools are manufactured by powder metallurgy techniques and have a composition of (A) 90% tungsten carbide and 10% cobalt (B) 70% aluminium oxide & 30% silica (C) 30% nickel, 15% chromium & 55% tungsten (D) 65% tungsten & 35% zirconium

Last Answer : Option A

Cemented carbide tools are not suitable for cutting (A) Aluminium (B) Brass (C) Cast iron (D) Steel

Description : Cemented carbide tools are not suitable for cutting (A) Aluminium (B) Brass (C) Cast iron (D) Steel

Last Answer : (A) Aluminium

Powder metallurgy technique is used in the production of __________ tools. (A) Tungsten carbide (B) High carbon steel (C) High speed steel (D) Drilling

Description : Powder metallurgy technique is used in the production of __________ tools. (A) Tungsten carbide (B) High carbon steel (C) High speed steel (D) Drilling

Last Answer : Option A

Broaching tools are usually made of (A) Cermets (B) High speed steel (C) Tungsten carbide (D) Stellite

Description : Broaching tools are usually made of (A) Cermets (B) High speed steel (C) Tungsten carbide (D) Stellite

Last Answer : Option B

Constituents of stellite are (A) Zinc, copper and nickel (B) Cobalt, chromium and tungsten (C) Zinc, aluminium and nickel (D) Nickel, cobalt and vanadium

Description : Constituents of stellite are (A) Zinc, copper and nickel (B) Cobalt, chromium and tungsten (C) Zinc, aluminium and nickel (D) Nickel, cobalt and vanadium

Last Answer : (B) Cobalt, chromium and tungsten

Constituents of stellite are (A) Zinc, copper & nickel (B) Cobalt, chromium & tungsten (C) Zinc, aluminium & nickel (D) Nickel, cobalt & vanadium

Description : Constituents of stellite are (A) Zinc, copper & nickel (B) Cobalt, chromium & tungsten (C) Zinc, aluminium & nickel (D) Nickel, cobalt & vanadium

Last Answer : (B) Cobalt, chromium & tungsten

Which of the following is a ferromagnetic material ? A. Tungsten B. Aluminium C. Copper D. Nickel (Answer)

Description : Which of the following is a ferromagnetic material ? A. Tungsten B. Aluminium C. Copper D. Nickel (Answer)

Last Answer : D. Nickel (Answer)

Which of the following is a ferromagnetic material ? (a) Tungsten (b) Aluminium (c) Copper (d) Nickel

Description : Which of the following is a ferromagnetic material ? (a) Tungsten (b) Aluminium (c) Copper (d) Nickel

Last Answer : (d) Nickel

Principal alloying elements of cast tool alloys which have very high wear resistance & high temperature strength are (A) Cobalt, chromium & tungsten (B) Cobalt, chromium & nickel (C) Molybdenum, tungsten & chromium (D) Cobalt, zirconium & molybdenum

Description : Principal alloying elements of cast tool alloys which have very high wear resistance & high temperature strength are (A) Cobalt, chromium & tungsten (B) Cobalt, chromium & nickel (C) Molybdenum, tungsten & chromium (D) Cobalt, zirconium & molybdenum

Last Answer : : Option A

The most resistant material to alkaline corrosion is (A) Duriron (B) Nickel (C) Aluminium (D) Karbate

Description : The most resistant material to alkaline corrosion is (A) Duriron (B) Nickel (C) Aluminium (D) Karbate

Last Answer : (B) Nickel

Which of the following has the highest modulus of elasticity (about 7 × 106 kg/cm2)? (A) High speed steel (B) Stainless steel (C) Tungsten carbide (D) Superalloys

Description : Which of the following has the highest modulus of elasticity (about 7 × 106 kg/cm2)? (A) High speed steel (B) Stainless steel (C) Tungsten carbide (D) Superalloys

Last Answer : (C) Tungsten carbide

_________ is the hardest material out of the following. (A) Boron carbide (B) Tungsten carbide (C) Hardened steel (D) Silicon carbide

Description : _________ is the hardest material out of the following. (A) Boron carbide (B) Tungsten carbide (C) Hardened steel (D) Silicon carbide

Last Answer : (A) Boron carbide

Drills are usually made of (A) Cermets (B) High speed steel (C) Alloy steel (D) Tungsten carbide

Description : Drills are usually made of (A) Cermets (B) High speed steel (C) Alloy steel (D) Tungsten carbide

Last Answer : Option B

Which of the following elements is not present in stainless steel? (1) Iron (2) Tungsten (3) Chromium (4) Nickel

Description : Which of the following elements is not present in stainless steel? (1) Iron (2) Tungsten (3) Chromium (4) Nickel

Last Answer : (2) Tungsten Explanation: Stainless steel is defined as a steel alloy of iron with a minimum of 10.5% to 11% chromium content by mass. There are different types of stainless steels: ... stabilized. This crystal structure makes such steels virtually non-magnetic and less brittle at low temperatures.

Which of the following metals is used for the manufacture of heating elements provided in electric iron? (1) Nickel (2) Chromium (3) Nichrome (4) Tungsten

Description : Which of the following metals is used for the manufacture of heating elements provided in electric iron? (1) Nickel (2) Chromium (3) Nichrome (4) Tungsten

Last Answer : (3) Nichrome Explanation: Nichrome is the most common domestic heating element and is found in many household products. Commonly, items such as toasters, hair dryers and heaters use nichrome coils to ... percent nickel and 20 percent chromium, and its high melting point of 1,400 degrees Celsius.

Most conducting materials such as copper, aluminum, iron, nickel, and tungsten _____________. A. increase in resistance with increased temperature B. increase in resistance with decreased temperature C. decrease in resistance with increased temperature D. increase in conductance with increased temperature

Description : Most conducting materials such as copper, aluminum, iron, nickel, and tungsten _____________. A. increase in resistance with increased temperature B. increase in resistance with decreased ... C. decrease in resistance with increased temperature D. increase in conductance with increased temperature

Last Answer : Answer: A

Which of the following elements is not present in stainless steel? (1) Iron (2) Tungsten (3) Chromium(4) Nickel

Description : Which of the following elements is not present in stainless steel? (1) Iron (2) Tungsten (3) Chromium(4) Nickel

Last Answer : Tungsten

Which of the following metals is used for the manufacture of heating elements provided in electric iron ? (1) Nickel (2) Chromium (3) Nichrome (4) Tungsten

Description : Which of the following metals is used for the manufacture of heating elements provided in electric iron ? (1) Nickel (2) Chromium (3) Nichrome (4) Tungsten

Last Answer : Nichrome

Are tungsten carbide prices going up?

Description : Are tungsten carbide prices going up?

Last Answer : I use tungsten carbide burrs on my rotary grinder and they have not changed in price in the last couple of years. I didn’t know they made jewelry out of tc, is it pretty?

Presence of nickel in steel improves its (A) Corrosion resistance (B) Cutting ability (C) Wear resistance (D) All (A), (B) and (C

Description : Presence of nickel in steel improves its (A) Corrosion resistance (B) Cutting ability (C) Wear resistance (D) All (A), (B) and (C

Last Answer : (A) Corrosion resistance

The element used in an electric filament is (a) Copper (b) Aluminium (c) Iron (d) Tungsten

Description : The element used in an electric filament is (a) Copper (b) Aluminium (c) Iron (d) Tungsten

Last Answer : Ans:(d)

Which of the following has a very high carbide forming tendency in steels? (A) Silicon (B) Chromium (C) Nickel (D) Vanadium

Description : Which of the following has a very high carbide forming tendency in steels? (A) Silicon (B) Chromium (C) Nickel (D) Vanadium

Last Answer : (D) Vanadium

Catalyst used in catalytic reforming is (A) Platinum on alumina (B) Nickel (C) Iron (D) Aluminium chloride

Description : Catalyst used in catalytic reforming is (A) Platinum on alumina (B) Nickel (C) Iron (D) Aluminium chloride

Last Answer : (A) Platinum on alumina

Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Last Answer : (D) Brass, cast iron, mild steel and tin

For handling sulphuric acid of 95% strength, the suitable material of construction for pipes is (A) Stainless steel (B) Cast iron (C) Aluminium (D) Nickel

Description : For handling sulphuric acid of 95% strength, the suitable material of construction for pipes is (A) Stainless steel (B) Cast iron (C) Aluminium (D) Nickel

Last Answer : (B) Cast iron

Mercury is transported in metal containers made of (A) Aluminium (B) Iron (C) Lead (D) Nickel

Description : Mercury is transported in metal containers made of (A) Aluminium (B) Iron (C) Lead (D) Nickel

Last Answer : (B) Iron

Polymerisation reactor used in the production of styrene butadiene rubber (SBR) is made of (A) Stainless steel or glass lined steel (B) Nickel clad steel (C) High silicon cast iron (D) Aluminium

Description : Polymerisation reactor used in the production of styrene butadiene rubber (SBR) is made of (A) Stainless steel or glass lined steel (B) Nickel clad steel (C) High silicon cast iron (D) Aluminium

Last Answer : (A) Stainless steel or glass lined steel

Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber, Kel-F and Teflon (B) Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel

Description : Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber ... Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel

Last Answer : (A) High silicon iron, silicon rubber, Kel-F and Teflon

Reaction of calcium carbide with water produces a gas, which is used (A) As an illuminant (B) For metal cutting/welding(C) Both (A) & (B)(D) Neither (A) nor (B)

Description : Reaction of calcium carbide with water produces a gas, which is used (A) As an illuminant (B) For metal cutting/welding (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Highest cutting speed is achieved by the __________ tool material. (A) High speed steel (B) Carbide (C) Cast alloy (D) Plain carbon steel

Description : Highest cutting speed is achieved by the __________ tool material. (A) High speed steel (B) Carbide (C) Cast alloy (D) Plain carbon steel

Last Answer : (B) Carbide

Stellite is a __________ material. (A) Ferrous (B) Ceramic (C) Cemented carbide (D) Non-ferrous cast alloy cutting tool

Description : Stellite is a __________ material. (A) Ferrous (B) Ceramic (C) Cemented carbide (D) Non-ferrous cast alloy cutting tool

Last Answer : (D) Non-ferrous cast alloy cutting tool

The main constituent of carborundum is __________ carbide. (A) Calcium (B) Silicon (C) Boron (D) Aluminium

Description : The main constituent of carborundum is __________ carbide. (A) Calcium (B) Silicon (C) Boron (D) Aluminium

Last Answer : (B) Silicon

hich of the following is the most suitable abrasive for grinding high tensile strength materials? (A) Silicon carbide (B) Corundum (C) Aluminium oxide (D) Boron carbide

Description : hich of the following is the most suitable abrasive for grinding high tensile strength materials? (A) Silicon carbide (B) Corundum (C) Aluminium oxide (D) Boron carbide

Last Answer : Option C

Which of the following alloy steels is the most suitable for making gun barrels and projectiles? (A) Tungsten steel (B) Molybdenum steel (C) Nickel-chrome steel (D) Cobalt steel

Description : Which of the following alloy steels is the most suitable for making gun barrels and projectiles? (A) Tungsten steel (B) Molybdenum steel (C) Nickel-chrome steel (D) Cobalt steel

Last Answer : (C) Nickel-chrome steel

Residual magnetism in steel for magnets is increased by the addition of (A) Nickel (B) Cobalt (C) Tungsten (D) Chromium

Description : Residual magnetism in steel for magnets is increased by the addition of (A) Nickel (B) Cobalt (C) Tungsten (D) Chromium

Last Answer : (B) Cobalt

Corrosion resistance of steel is increased by the addition of (A) Phosphorous and tungsten (B) Nickel and chromium (C) Lead and vanadium (D) Molybdenum and tungsten

Description : Corrosion resistance of steel is increased by the addition of (A) Phosphorous and tungsten (B) Nickel and chromium (C) Lead and vanadium (D) Molybdenum and tungsten

Last Answer : (B) Nickel and chromium

Addition of __________ in steel can help in increasing the depth of hardness. (A) Nickel (B) Chromium (C) Vanadium (D) Tungsten

Description : Addition of __________ in steel can help in increasing the depth of hardness. (A) Nickel (B) Chromium (C) Vanadium (D) Tungsten

Last Answer : (D) Tungsten

Addition of __________ to the steel helps in increasing the residual magnetism in steel used for making magnets. (A) Chromium (B) Nickel (C) Tungsten (D) Cobalt

Description : Addition of __________ to the steel helps in increasing the residual magnetism in steel used for making magnets. (A) Chromium (B) Nickel (C) Tungsten (D) Cobalt

Last Answer : (D) Cobalt

Steel containing low percentage of nickel, chromium & tungsten are termed as the __________ steel. (A) Wrought (B) Tool (C) Alloy (D) Plain carbon

Description : Steel containing low percentage of nickel, chromium & tungsten are termed as the __________ steel. (A) Wrought (B) Tool (C) Alloy (D) Plain carbon

Last Answer : (D) Plain carbon

Alloying elements present in Haynes stellite, which has superior performance than high speed steel, are: (A) Nickel, cobalt & chromium (B) Tungsten, chromium & cobalt (C) Manganese, chromium & cobalt (D) Tungsten, molybdenum & nickel

Description : Alloying elements present in Haynes stellite, which has superior performance than high speed steel, are: (A) Nickel, cobalt & chromium (B) Tungsten, chromium & cobalt (C) Manganese, chromium & cobalt (D) Tungsten, molybdenum & nickel

Last Answer : Option B

Compressed dry air is used as the cutting fluid, while machining (A) Steel (B) Cast iron (C) Aluminium (D) None of these

Description : Compressed dry air is used as the cutting fluid, while machining (A) Steel (B) Cast iron (C) Aluminium (D) None of these

Last Answer : Option B

Which of the following is false? (a) Mica is usually found in metamorphic and igneous rocks (b) Aluminium has the advantage over iron as it is resistant to corrosion (c) line is mostly used in galvanising iron and steel goods (d) Manganese is largely used in making fertilizers

Description : Which of the following is false? (a) Mica is usually found in metamorphic and igneous rocks (b) Aluminium has the advantage over iron as it is resistant to corrosion (c) line is mostly used in galvanising iron and steel goods (d) Manganese is largely used in making fertilizers

Last Answer : Ans: (d)

Addition of tungsten to steel imparts (A) Magnetic properties (B) Cutting hardness (C) Corrosion resistance (D) Ductility

Description : Addition of tungsten to steel imparts (A) Magnetic properties (B) Cutting hardness (C) Corrosion resistance (D) Ductility

Last Answer : (B) Cutting hardness

High speed cutting tool steels contain about __________ percent of tungsten. (A) 6-8 (B) 18-20 (C) 30-35 (D) 50-55

Description : High speed cutting tool steels contain about __________ percent of tungsten. (A) 6-8 (B) 18-20 (C) 30-35 (D) 50-55

Last Answer : (B) 18-20

The resistance wire used in a hot wire anemometer for conducting electrical current is made of (A) Copper (B) Tungsten (C) Chromium (D) Aluminium

Description : The resistance wire used in a hot wire anemometer for conducting electrical current is made of (A) Copper (B) Tungsten (C) Chromium (D) Aluminium

Last Answer : (B) Tungsten

Electromagnet is constructed with which of the following? (1) Steel (2) Soft Iron (3) Aluminium (4) Nickel

Description : Electromagnet is constructed with which of the following? (1) Steel (2) Soft Iron (3) Aluminium (4) Nickel

Last Answer : (2) Soft Iron Explanation: An electromagnet is a type of magnet in which the magnetic field is produced by an electric current. The magnetic field disappears when the current is turned off. It is made of soft iron since it has the property of losing its magnetism very quickly.

Electromagnet is constructed with which of the following ? (1) Steel (2) Soft Iron (3) Aluminium (4) Nickel

Description : Electromagnet is constructed with which of the following ? (1) Steel (2) Soft Iron (3) Aluminium (4) Nickel

Last Answer : Soft Iron

Chilled iron castings are (A) Easily machinable (B) Soft on surface(C) Highly wear resistant(D) None of these

Description : Chilled iron castings are (A) Easily machinable (B) Soft on surface (C) Highly wear resistant (D) None of these

Last Answer : (C) Highly wear resistant

In regard to carbide burs; the more number of cutting blades and low speed will result in: A. Less efficient cutting and a smoother surface B. Less efficient cutting and a rougher surface C. More efficient cutting and a smoother surface D. More efficient cutting and a rougher surface

Description : In regard to carbide burs; the more number of cutting blades and low speed will result in: A. Less efficient cutting and a smoother surface B. Less efficient cutting and a rougher surface C. More efficient cutting and a smoother surface D. More efficient cutting and a rougher surface

Last Answer : A. Less efficient cutting and a smoother surface