For a pantograph write any twoi)Types ii ) Advantages iii ) Methods of raising iv ) Materials of collector strip

For a pantograph write any twoi)Types ii ) Advantages iii ) Methods of raising iv ) Materials of collector strip
by

1 Answer

Answer :

Ans: i) Types – a) Diamond Type Pantograph b) Faiveley Type Pantograph 

ii) Advantages – a)Reversible operation is possible b)current collection capacity is high 

iii) Methods of raisinga) Air raised b) Spring raised 

iv) Materials of collector stripcopper, copper steel combination, silicon manganese steel ,aluminum steel, bronze, Metallized carbon or carbon
by

Related questions

Draw and explain construction of Faiveley type pantograph collector. Also explain its working in brief.

Description : Draw and explain construction of Faiveley type pantograph collector. Also explain its working in brief. 

Last Answer : Faiveley type pantograph collector:  Construction of Faiveley type pantograph collector :  It consists of i) sub frame or base, ii) Articulated system, iii) Pneumatic control system including ... move freely in the slot of slotted rod & pantograph is operated purely by the up springs.

Compare BJT common base configuration with common collector configuration on the basis of (i) Current gain (ii) Voltage gain (iii) Input impedance (iv) Output impedance

Description : Compare BJT common base configuration with common collector configuration on the basis of (i) Current gain (ii) Voltage gain (iii) Input impedance (iv) Output impedance

Last Answer : Parameter Common Base Common Collector Current gain Low (About 1) High (1+β) Voltage gain High 1  Input impedance  Low High Output impedance High Low

State the four methods of laying of cable. State precautions while laying of underground cable in the situation : (i) Minimum clearance between cable and water pipe line when running in parallel. (ii) Minimum clearance between cable and water pipe line when running in parallel. (iii) If cable is laid through pipe what should be diameter of pipe. (iv) When more than one cable is to be laid in the same trench, what should be minimum spacing between two cables ?

Description : State the four methods of laying of cable. State precautions while laying of underground cable in the situation : (i) Minimum clearance between cable and water pipe line when running in parallel. (ii) ... is to be laid in the same trench, what should be minimum spacing between two cables ?  

Last Answer : (i) Minimum clearance between cable and water pipe line when running in parallel:- 0.5 mtr. (ii) Minimum clearance between cable and water pipe line when running in parallel:- 0.5 mtr ... should be minimum spacing between two cables :- Then minimum 30 cm spacing is provided between 2 cables 

Select insulating materials for following parts : (i) Insulation between heating element and base plate of electric iron. (ii) Insulation used over copper or aluminium conductor used for making coils. (iii) Transformer bushings. (iv) Insulation between transmission line and pole.

Description : Select insulating materials for following parts : (i) Insulation between heating element and base plate of electric iron. (ii) Insulation used over copper or aluminium conductor used for making coils. (iii) Transformer bushings. (iv) Insulation between transmission line and pole.

Last Answer : Parts Insulating Materials  Insulation between heating element and base plate of electric iron. Mica Insulation used over copper or aluminium conductor used for making coils.  ... Transformer bushings Porcelain  Insulation between transmission line and pole. Porcelain

State the application of following materials : i) CRGO Silicon Steel ii) HRGO Silicon Steel iii) Amorphous metal iv) Bronze

Description : State the application of following materials : i) CRGO Silicon Steel ii) HRGO Silicon Steel iii) Amorphous metal iv) Bronze 

Last Answer : Applications of CRGO Silicon Steel: 1) Manufacturing distribution and power transformer cores. 2) Manufacturing cores of audio transformers, ballast transformers, specialty transformers. 3) Manufacturing cores ... used. 5) Cadmium bronze is used for making commutator segments and contact wires. 

Draw and explain in brief construction of Diamond Pantograph. Write one advantage and one disadvantage of it.

Description : Draw and explain in brief construction of Diamond Pantograph. Write one advantage and one disadvantage of it.

Last Answer : Diamond Pantograph: Construction of Diamond Pantograph: 1)Diamond Pantograph consist of pressed steel channel sectional fitted with renewable collector strips and supported at the apex of Pentagonal ... It requires more maintenance than Faiveley type. 4. It is costlier than Faiveley type.

Given below are four methods (A-D) and their modes of action (i-iv) in achieving contraception. Select their correct matching from the four options that follow. Method Mode of Action A. The pill (i) Prevents sperms reaching cervix B. Condom (ii) Prevents implantation C. Vasectomy (iii) Prevents ovulation D. Copper T (iv) Semen contains no sperms (a) A – (iii), B – (iv), C – (i), D – (ii) (b) A – (ii), B – (iii), C – (i), D – (iv) (c) A – (iii), B – (i), C – (iv), D – (ii) (d) A – (iv), B – (i), C – (ii), D – (iii)

Description : Given below are four methods (A-D) and their modes of action (i-iv) in achieving contraception. Select their correct matching from the four options that follow. Method Mode of Action A. The pill (i) Prevents sperms reaching cervix B. Condom ... D - (ii) (d) A - (iv), B - (i), C - (ii), D - (iii)

Last Answer : A – (iii), B – (i), C – (iv), D – (

The methods used for locating the plane table stations are (i) Radiation (ii) Traversing (iii) Intersection (iv) Resection The correct answer is (A) (i) and (ii) (B) (iii) and (iv) (C) (ii) and (iv) (D) (i) and (iii)

Description : The methods used for locating the plane table stations are (i) Radiation (ii) Traversing (iii) Intersection (iv) Resection The correct answer is (A) (i) and (ii) (B) (iii) and (iv) (C) (ii) and (iv) (D) (i) and (iii)

Last Answer : (C) (ii) and (iv)

Describe the use of following methods: (i) Drawoval ( ) (ii) getFont ( ) (iii) drawRect ( ) (iv) getFamily ( )

Description : Describe the use of following methods: (i) Drawoval ( ) (ii) getFont ( ) (iii) drawRect ( ) (iv) getFamily ( )

Last Answer : (i) Drawoval ( ): Drawing Ellipses and circles: To draw an Ellipses or circles used drawOval() method can be used. Syntax: void drawOval(int top, int left, int width, int height) The ellipse is drawn ... the family of the font. String family = f.getFamily(); Where f is an object of Font class

State the purposes of following methods of leveling. i)Profile leveling, ii)Fly leveling, iii)Check leveling iv)Reciprocal leveling

Description : State the purposes of following methods of leveling. i)Profile leveling, ii)Fly leveling, iii)Check leveling iv)Reciprocal leveling

Last Answer : 1. Profile leveling- To determine the undulation of ground surface along given line for alignment of road, canal or pipe, railway line 2. Fly leveling-It is used to for connecting B.M. to ... is used to find the difference in leveling between two points two point obstructed due to river or pond.

Match column -I with column - II. Column-I Column-II A. Saprophyte (i) Symbiotic association of fungi with plant roots B. Parasite (ii) Decomposition of dead organic materials C. Lichens (iii) Living on living plants or animals D. Mycorrhiza (iv) Symbiotic association of algae and fungi Choose the correct answer from the options given below. (A) (B) (C) (D) (a) (ii) (iii) (iv) (i) (b) (i) (ii) (iii) (iv) (c) (iii) (ii) (i) (iv) (d) (ii) (i) (iii) (iv)

Description : Match column -I with column - II. Column-I Column-II A. Saprophyte (i) Symbiotic association of fungi with plant roots B. Parasite (ii) Decomposition of dead organic materials C. Lichens (iii) Living on living plants or animals D. ... (iii) (iv) (c) (iii) (ii) (i) (iv) (d) (ii) (i) (iii) (iv)

Last Answer : (a) (ii) (iii) (iv) (i)

Arrange the following teaching process in order (i) Relating the present knowledge with the previous knowledge (ii) Evaluation (iii) re teaching (iv) Formulating objectives (v) Presentation of materials (a) (i), (ii), (iii), (iv), (v) (b) (ii), (i), (iii), (iv), (v) (c) (v), (iv), (iii), (i), (ii) (d) (iv), (i), (v), (ii), (iii)

Description : Arrange the following teaching process in order (i) Relating the present knowledge with the previous knowledge (ii) Evaluation (iii) re teaching (iv) Formulating objectives (v) Presentation of materials (a) (i), (ii), (iii), (iv), (v ... ), (iv), (iii), (i), (ii) (d) (iv), (i), (v), (ii), (iii)

Last Answer : (d) (iv), (i), (v), (ii), (iii)

State the functions and materials of following engine components: (i) Piston (ii) Connecting rod (iii)Crank shaft (iv)Exhaust manifold

Description : State the functions and materials of following engine components: (i) Piston (ii) Connecting rod (iii)Crank shaft (iv)Exhaust manifold

Last Answer : Engine components Material Functions Piston Cat aluminum alloy To transmit the force of explosion to the crankshaft. To form seal so that the high pressure gases in ... atmosphere through the exhaust pipe after combustion stroke is completed. To keep back pressure minimum.

Arrange the following teaching process in order (in) relating the present knowledge with the previous knowledge (ii) evaluation (iii) reteaching (iv) formulating objectives (v) presentation of materials

Description : Arrange the following teaching process in order (in) relating the present knowledge with the previous knowledge (ii) evaluation (iii) reteaching (iv) formulating objectives (v) presentation of materials Options: A) (i), (ii), (iii), (iv ... iii), (i) , (ii) D) (iv), (i) , ( v), (ii), (iii)

Last Answer : D) (iv), (i) , ( v), (ii), (iii) 

Arrange the following teaching process in order : (i) Relate the present knowledge with previous one (ii) Evaluation (iii) Reteaching (iv) Formulating instructional objectives (v) Presentation of instructional materials (A) (i), (ii), (iii), (iv), (v) (B) (ii), (i), (iii), (iv), (v) (C) (v), (iv), (iii), (i), (ii) (D) (iv), (i), (v), (ii), (iii)

Description : Arrange the following teaching process in order : (i) Relate the present knowledge with previous one (ii) Evaluation (iii) Reteaching (iv) Formulating instructional objectives (v) Presentation of instructional materials (A) (i), (ii), ( ... ), (iii), (i), (ii) (D) (iv), (i), (v), (ii), (iii)

Last Answer : (D) (iv), (i), (v), (ii), (iii)

Suggest one type of materials for water proofing for the following situations. i. Rising dampness in building ii. Leakages in dam iii. Concrete continuously in wet or damp condition iv. Leakages in lavatory ,bathroom and kitchen floor v. Cracks on plastered surface vi. Cracks on roof surface

Description : Suggest one type of materials for water proofing for the following situations. i. Rising dampness in building ii. Leakages in dam iii. Concrete continuously in wet or damp condition iv. Leakages in lavatory ,bathroom and kitchen floor v. Cracks on plastered surface vi. Cracks on roof surface

Last Answer : i. Flexible materials like butyl rubber, hot bitumen (asphalt), plastic sheets, bituminous felts, sheets of lead. ii. Liquid applied cementitious membranes iii. Liquid applied cementitious membranes ... v. Liquid applied cementitious membranes. vi. Brick bat coba, liquid applied bituminous membrane.

Advantages of B2C commerce to customers are (i)wide variety of goods can be accessed and comparative prices can be found (ii) shopping can be done at any time (iii)privacy of transactions can be guaranteed (iv)security of transactions can be guaranteed a. i and ii b. ii and iii c. iii and iv d. i and iv

Description : Advantages of B2C commerce to customers are  (i)wide variety of goods can be accessed and comparative prices  can be found  (ii) shopping can be done at any time  (iii)privacy of transactions can be guaranteed  (iv) ... be guaranteed a. i and ii b. ii and iii c. iii and iv d. i and iv

Last Answer : a. i and ii  

Advantages of B2C commerce are (i) Business gets a wide reach to customers (ii) Payment for services easy (iii)Shop can be open 24 hours a day seven days a week (iv)Privacy of transaction always maintained a. i and ii b. ii and iii c. i and iii d. iii and iv

Description : Advantages of B2C commerce are  (i) Business gets a wide reach to customers  (ii) Payment for services easy  (iii)Shop can be open 24 hours a day seven days a week  (iv)Privacy of transaction always maintained a. i and ii b. ii and iii c. i and iii d. iii and iv

Last Answer : c. i and iii  

Write example of each type (i) Primary transducer (ii) Active transducer (iii) Electrical transducer (iv) Digital transducer

Description : Write example of each type (i) Primary transducer (ii) Active transducer (iii) Electrical transducer (iv) Digital transducer

Last Answer : (i) Active transducer:-Thermocouple, piezoelectric, photovoltaic cell (ii) Primary transducer:- Bourdon tube, bellows, (iii) Electrical transducer.:- LVDT,RVDT, Hall effect, strain gauge, ... , optical pyrometer, radiation pyrometer (iv) Digital transducer:- Linear Encoder, digital taco generator

Write one application for the give dielectric material. (i) Polyvinyl Carbide(PVC) (ii) Glass (iii) Mica (iv) Cotton and Silk

Description : Write one application for the give dielectric material. (i) Polyvinyl Carbide(PVC) (ii) Glass (iii) Mica (iv) Cotton and Silk

Last Answer : (i) Polyvinyl Carbide(PVC):it is used in insulation of wires and cables in domestic wiring as well as in aircraft and factory wiring (any one)  (ii) Glass: 1) Alkaline glasses are used for ... with wax or varnishes are used in windings of magnet coils and small medium sized mechanics (any one) 

Related to ultrasonic flow meter: (i) Give any two types of it. (ii) Write any two specifications. (iii) Write two advantages over rotameter.

Description : Related to ultrasonic flow meter: (i) Give any two types of it. (ii) Write any two specifications. (iii) Write two advantages over rotameter. 

Last Answer : (i) Two types of ultrasonic flow meter:  ➢ Transit time flow meters (time differences) ➢ Doppler type. (ii) Write any two specifications: - 1. Accuracy 2. Linearity 3. Repeatability 4. ... for bidirectional flow 8. Excellent dynamic response 9. Good accuracy +-2% 10. o/p is electrical

How does the operation of the pantograph relate to dilations and similarity?

Description : How does the operation of the pantograph relate to dilations and similarity?

Last Answer : Feel Free to Answer

Instrument used for measuring area on maps is called – (1) Planimeter (2) Eidograph (3) Pantograph (4) Opisometer

Description : Instrument used for measuring area on maps is called – (1) Planimeter (2) Eidograph (3) Pantograph (4) Opisometer

Last Answer : (1) Planimeter Explanation: The planimeter is a drafting instrument used to measure the area of a graphically represented planar region. The region being measured may have any irregular shape, ... the planimeter is heading toward obsolescence, but not just yet. They are still being manufactured.

Pantograph is used for (A) Measuring distances (B) Measuring areas (C) Enlarging or reducing plans

Description : Pantograph is used for  (A) Measuring distances  (B) Measuring areas  (C) Enlarging or reducing plans 

Last Answer : (C) Enlarging or reducing plans 

The movement inside the Earth’s crust is studied by which of the following ? (1) Geology (2) Seismology (3) Plate tectonics (4) Pantograph

Description : The movement inside the Earth’s crust is studied by which of the following ? (1) Geology (2) Seismology (3) Plate tectonics (4) Pantograph

Last Answer : Seismology

Instrument used for measuring area on maps is called (1) Planimeter (2) Eidograph (3) Pantograph(4) Opisometer

Description : Instrument used for measuring area on maps is called (1) Planimeter (2) Eidograph (3) Pantograph (4) Opisometer

Last Answer : Planimeter

Pantograph is

Description : Pantograph is (A) a device used to draw Speed-Time characteristics in traction. (B) used to supply a.c. to transformer in locomotive. (C) a part of the control devices in locomotives. (D) used in traction motors for better efficiency.

Last Answer : Pantograph is used to supply a.c. to transformer in locomotive.

A metal ‘X’ acquires a green colour coating on its surface on exposure to air. (i) Identify the metal ‘X’ and name the process responsible for this change. (ii)Name and write chemical formula of the green coating formed on the metal. (iii) List two important methods to prevent the process. -Chemistry

Description : A metal X' acquires a green colour coating on its surface on exposure to air. (i) Identify the metal X' and name the process responsible for this change. (ii)Name and write chemical ... the green coating formed on the metal. (iii) List two important methods to prevent the process. -Chemistry

Last Answer : (i) Metal is copper. The process is corrosion. (ii)Basic copper carbonate [CuCO3.Cu(0H)2]. (iii) • It should be coated with tin • It should be mixed with other metals to form alloys.

State advantages of electric heating over other types of heating methods.

Description : State advantages of electric heating over other types of heating methods.

Last Answer : Advantages of Electric heating over the other types of heating methods: 1. It can be put into service immediately. 2. No standby losses. 3. High efficiency. 4. More economical ... low attention and supervision. 14. Protection against overheating can be provided by suitable switch gear. 

Match the placental types (column-I) with their examples (column-II). Column-I Column-II (A) Basal (i) Mustard (B) Axile (ii) China rose ((a) (A)-(ii), (B)-(iii), (C)-(iv), (D)-(i) (b) (A)-(i), (B)-(ii), (C)-(iii), (D)-(iv) (c) (A)-(iv), (B)-(ii), (C)-(i), (D)-(iii) (d) (A)-(iii), (B)-(iv), (C)-(i), (D)-(ii)C) Parietal (iii)Dianthus (D) Free central (iv) Sunflower Choose the correct answer from the following options.

Description : Match the placental types (column-I) with their examples (column-II). Column-I Column-II (A) Basal (i) Mustard (B) Axile (ii) China rose (C) Parietal (iii)Dianthus (D) Free central (iv) Sunflower Choose the correct answer from the ... i), (D)-(iii) (d) (A)-(iii), (B)-(iv), (C)-(i), (D)-(ii)

Last Answer : (c) (A)-(iv), (B)-(ii), (C)-(i), (D)-(iii)

Classify the following as primitive or non-primitive data types: (i) char (ii) arrays (iii) int (iv) classes

Description : Classify the following as primitive or non-primitive data types: (i) char (ii) arrays (iii) int (iv) classes

Last Answer : Ans. (i) char – Primitive (ii) arrays – Non primitive (iii) int – Primitive (iv) Classes – Non primitive

Arrange the following primitive data types in an ascending order of their size: (i) char (ii) byte (iii) double (iv) int

Description : Arrange the following primitive data types in an ascending order of their size: (i) char (ii) byte (iii) double (iv) int

Last Answer : Ans. The sizes of the given data types are as follows char = 2 bytes byte = 1 byte double = 8 bytes int = 4 bytes Arranging them in ascending order gives byte < char < int < double

Classify the following as primitive or non-primitive data types: (i) char (ii) arrays (iii) int (iv) classes

Description : Classify the following as primitive or non-primitive data types: (i) char (ii) arrays (iii) int (iv) classes

Last Answer : Ans. (i) char – Primitive (ii) arrays – Non primitive (iii) int – Primitive (iv) Classes – Non primitive

An ER Model includes I. An ER diagram portraying entity types. II. Attributes for each entity type III. Relationships among entity types. IV. Semantic integrity constraints that reflects the business rules about data not captured in the ER diagram. (A) I, II, III & IV (B) I&IV (C) I, II & IV (D) I & III

Description : An ER Model includes I. An ER diagram portraying entity types. II. Attributes for each entity type III. Relationships among entity types. IV. Semantic integrity constraints that reflects the business rules about data not ... ; IV (B) I&IV (C) I, II & IV (D) I & III

Last Answer : (A) I, II, III & IV

Match the following types of variables with the corresponding programming languages: (a) Static variables (i) Local variables in Pascal (b) Stack dynamic (ii) All variables in APL (c) Explicit heap dynamic (iii) Fortran 77 (d) Implicit heap dynamic (iv) All objects in JAVA Codes: (a) (b) (c) (d) (A) (i) (iii) (iv) (ii) (B) (iv) (i) (iii) (ii) (C) (iii) (i) (iv) (ii) (D) (ii) (i) (iii) (iv)

Description : Match the following types of variables with the corresponding programming languages: (a) Static variables (i) Local variables in Pascal (b) Stack dynamic (ii) All variables in APL (c) Explicit heap dynamic (iii) Fortran 77 (d) Implicit ... (ii) (C) (iii) (i) (iv) (ii) (D) (ii) (i) (iii) (iv)

Last Answer : (C) (iii) (i) (iv) (ii) 

Define the following special types of concretes with its one use. i) Vacuum concrete ii) Fiber reinforced concrete iii) High performance concrete iv) Self-compacting concrete

Description : Define the following special types of concretes with its one use. i) Vacuum concrete ii) Fiber reinforced concrete iii) High performance concrete iv) Self-compacting concrete

Last Answer : The uses of special types of concretes are as follows.  i) Vacuum concrete: It is the concrete in which entrained air and excess water form concrete mix is taken out from vacuum pump, ... . large bridge and machine foundations iii. Pumped concrete for floors and slabs. iv. Pre-stressed concrete

State any two applications of each for the following types of electrical heating : (i) Direct resistance heating(ii) Indirect induction heating (iii) Direct.arc heating (iv) Dielectric heating

Description : State any two applications of each for the following types of electrical heating : (i) Direct resistance heating(ii) Indirect induction heating (iii) Direct.arc heating (iv) Dielectric heating

Last Answer : (i) Direct resistance heating:- 1. This type of heating used for industrial purpose 2. Salt bath heating: This utilized for the purpose of carbonizing, tempering, quenching and hardening of steel tools 3. ... purpose. 14)In foundry for heating of sand, core, which are used in molding processes.

Write the full forms of: (i) URL (ii) <LI> (iii) <TD> (iv) HTML -Technology

Description : Write the full forms of: (i) URL (ii) (iii) (iv) HTML -Technology

Last Answer : Uniform Resource LocatorList ItemTable DataHyper Text Markup Language

Write the following in exponential form and redical form. (i) Cube root of 729 (ii) Fifth root of 1990 (iii) Square root of 2001 (iv) Seventh root of

Description : Write the following in exponential form and redical form. (i) Cube root of 729 (ii) Fifth root of 1990 (iii) Square root of 2001 (iv) Seventh root of

Last Answer : Write the following in exponential form and redical form. (i) Cube root of 729 (ii) Fifth root of ... ) Square root of 2001 (iv) Seventh root of 777

How did Anne feel when she was punished the third time by Mr Keesing? i) She was happy as she had to write three essays on the same topic. ii) She enjoyed making fun of Mr. Keesing in her own way. iii) She was worried as she had run out of original ideas for her essay. iv) She was thrilled at another opportunity to showcase her writing abilities.

Description : How did Anne feel when she was punished the third time by Mr Keesing? i) She was happy as she had to write three essays on the same topic. ii) She enjoyed making fun of Mr. Keesing ... of original ideas for her essay. iv) She was thrilled at another opportunity to showcase her writing abilities.

Last Answer : iii) She was worried as she had run out of original ideas for her essay.

What does ̳had a good laugh‘ imply, in the context of Mr. Keesing? i) Celebrated his ability to make Anne write the essay. ii) Ridiculed Anne in front of the whole class. iii) Pulled up Anne for her arguments in the essay. iv) Realised the humour in it and was amused.

Description : What does ̳had a good laugh‘ imply, in the context of Mr. Keesing? i) Celebrated his ability to make Anne write the essay. ii) Ridiculed Anne in front of the whole class. iii) Pulled up Anne for her arguments in the essay. iv) Realised the humour in it and was amused.

Last Answer : iv) Realised the humour in it and was amused.

Anne was assigned to write an essay on- i) Need of talking ii) Chatterbox iii) Her family iv) Her friends

Description : Anne was assigned to write an essay on- i) Need of talking ii) Chatterbox iii) Her family iv) Her friends

Last Answer : ii) Chatterbox

Anne decided to write a diary because- i) she had no close friend ii) she was a good writer iii) she wanted to be popular iv) she wanted to be different

Description : Anne decided to write a diary because- i) she had no close friend ii) she was a good writer iii) she wanted to be popular iv) she wanted to be different

Last Answer : iv) she wanted to be different

To write down the idea as and when it occurs in mind is called— i) Long-awaited ii) Jot down iii) To enhance iv) Narrate

Description : To write down the idea as and when it occurs in mind is called— i) Long-awaited ii) Jot down iii) To enhance iv) Narrate

Last Answer : ii) Jot down

Write short notes on: i. Stored Program Control. ii. Congestion. iii. Common channel signaling. iv. PSTN.

Description : Write short notes on: i. Stored Program Control. ii. Congestion. iii. Common channel signaling. iv. PSTN.

Last Answer : (i) Stored Program Control: In centralized control, all the control equipment is replaced by a single processor which must be quite powerful. It must be capable of processing 10 to 100 calls ... the combination of lines and switches that from a system of electrical routes through the network.  

Which of the following is the task of a Test Lead / Leader: i. Interaction with the Test Tool Vendor to identify best ways to leverage test tool on the project. ii. Write Test Summary Reports based on the information gathered during testing iii. Decide what should be automated , to what degree and how. iv. Create the Test Specifications a) i, ii, iii is true and iv is false b) ii,iii,iv is true and i is false c) i is true and ii,iii,iv are false d) iii and iv is correct and i and ii are incorrect

Description : Which of the following is the task of a Test Lead / Leader: i. Interaction with the Test Tool Vendor to identify best ways to leverage test tool on the project. ii. Write Test Summary Reports based on the ... is true and ii,iii,iv are false d) iii and iv is correct and i and ii are incorrect

Last Answer : a) i, ii, iii is true and iv is false

Write the safety measure in the following accidental cases: (i) Eye injury (chemical) (ii) Burn (iii) Skin contact (iv) Inhalation of toxic fumes.

Description : Write the safety measure in the following accidental cases: (i) Eye injury (chemical) (ii) Burn (iii) Skin contact (iv) Inhalation of toxic fumes.

Last Answer : Safety measures for: i)Eye injury : a) Have the person immediately rinse the eye with clean water. b) Flush with lukewarm water for 15-30 minutes c) Flush the eye to ... symptoms such as head ache, nose or throat irritation, dizziness or drowsiness persists, seek immediate medical attention.

Write the suitable cutter for carrying following operations on milling machine (i) Gear Tooth (ii) Parting off (iii) Keyway (iv) V-grooves (v) Rounding of corner (vi) Cutting of narrow slot and groove

Description : Write the suitable cutter for carrying following operations on milling machine (i) Gear Tooth (ii) Parting off (iii) Keyway (iv) V-grooves (v) Rounding of corner (vi) Cutting of narrow slot and groove

Last Answer : (i) Gear Tooth : Form milling cutter, Cylindrical type or End mill type, Gear cutter. (ii) Parting off: Slitting Cutter (iii) Keyway : Staggered teeth side milling cutter, End mill cutter, key ... milling cutter. Selection of a cutter depends upon type and size of slot or groove to be produced. 

Write type of chip formed with following factors. (i) High rake angle (ii) High cutting speed (iii) Small depth of cut (iv) Low cutting speed (v) Large depth of cut (vi) Low rake angle

Description : Write type of chip formed with following factors. (i) High rake angle (ii) High cutting speed (iii) Small depth of cut (iv) Low cutting speed (v) Large depth of cut (vi) Low rake angle

Last Answer : (i) High rake angle : Continuous chips (ii) High cutting speed : Continuous chips (iii) Small depth of cut : Continuous chips (iv) Low cutting speed :Continuous chips with built up edge (v) ... cut : Continuous chips with built up edge (vi) Low rake angle :Continuous chips with built up edge