Suggest one type of materials for water proofing for the following situations. i. Rising dampness in building ii. Leakages in dam iii. Concrete continuously in wet or damp condition iv. Leakages in lavatory ,bathroom and kitchen floor v. Cracks on plastered surface vi. Cracks on roof surface

Suggest one type of materials for water proofing for the following situations. i. Rising dampness in building ii. Leakages in dam iii. Concrete continuously in wet or damp condition iv. Leakages in lavatory ,bathroom and kitchen floor v. Cracks on plastered surface vi. Cracks on roof surface
by

1 Answer

Answer :

i. Flexible materials like butyl rubber, hot bitumen (asphalt), plastic sheets, bituminous felts, sheets of lead. ii. Liquid applied cementitious membranes iii. Liquid applied cementitious membranes iv. Liquid applied cementitious membranes, liquid applied latex membranes, brick bat coba, liquid applied bituminous membrane. v. Liquid applied cementitious membranes. vi. Brick bat coba, liquid applied bituminous membrane.
by

Related questions

State situations where sound insulating and damp proofing materials are used.

Description : State situations where sound insulating and damp proofing materials are used. 

Last Answer : Situations where sound insulating materials are used: 1) Glass, mineral wool mats, are used as sound insulators as solid inner layers underneath floors, 2) Wood fibre and asbestos cement slabs are used ... in toilet floors of upper story, so that no dampness will occur in slab below that floor.

Differentiate between any five of the following. (i) Artery and vein (ii) Hard water and soft water (iii) E-mail and Snail mail (iv) Apes and monkey (v) Hydrostatics and hydrodynamics (vi) Comet and meteor (vii) Barrage and dam (viii) Electron and hole (ix) Isobars and isotopes (x) Autopsy and biopsy

Description : Differentiate between any five of the following. (i) Artery and vein (ii) Hard water and soft water (iii) E-mail and Snail mail (iv) Apes and monkey (v) Hydrostatics and hydrodynamics (vi) Comet and ... (vii) Barrage and dam (viii) Electron and hole (ix) Isobars and isotopes (x) Autopsy and biopsy

Last Answer : Answers: (i) Artery and vein: Arteries: Muscular blood vessels that carry blood away from the heart. All arteries, with the exception of the pulmonary and umbilical arteries, carry oxygenated blood ... to determine cause of death Biopsy: Removal and study of a tissue sample for diagnostic purposes

Pick up the incorrect statement from the following: (A) The built up covered area at the floor level of any storey of a building is called plinth area (B) The usable covered area of the rooms of any storey of a building is called carpet area (C) The carpet area of a building along with area of its kitchen, pantry, store, lavatory, bath room and glazed veranda, is called floor area (D) None of thes

Description : Pick up the incorrect statement from the following: (A) The built up covered area at the floor level of any storey of a building is called plinth area (B) The usable covered area of the rooms of ... , pantry, store, lavatory, bath room and glazed veranda, is called floor area (D) None of thes

Last Answer : (D) None of thes

(i) Suggest the relevant method of water-proofing used for following construction. 1) Basement of buildings. 2) Swimming pool. 3) Water tank. (ii) Suggest the relevant method of transportation of concrete used for construction in following situation. 1) Concreting in hilly areas. 2) Concreting of high-rise building. 3) Concreting under water.

Description : (i) Suggest the relevant method of water-proofing used for following construction. 1) Basement of buildings. 2) Swimming pool. 3) Water tank. (ii) Suggest the relevant method of transportation of ... 1) Concreting in hilly areas. 2) Concreting of high-rise building. 3) Concreting under water.

Last Answer : Method of water-proofing for: 1) Basement of buildings: Waterproofing by using waterproof sealants. 2) Swimming pool: Waterproofing by spraying or grouting in cracks. 3) Water tank: Waterproofing by ... , concrete pump, slip form technique. 3) Concreting under water: Tremie pipe, grout pipe.

Suggest the energy conservation techniques in following cases : (i) Motor is running with 70% loaded condition. (ii) Motor is continuously loaded at 50%. (iii) Motor runs with 30% loaded condition but sometimes rises to 50% loading condition. (iv) Motor runs continuously under no-load condition.

Description : Suggest the energy conservation techniques in following cases : (i) Motor is running with 70% loaded condition. (ii) Motor is continuously loaded at 50%. (iii) Motor runs with 30% loaded condition but sometimes rises to 50% loading condition. (iv) Motor runs continuously under no-load condition.

Last Answer : Following are the suggestion the energy conservation techniques in following cases :  (i) Motor is running with 70% loaded condition: Use APFC or IPFC for better power factor improvement. Use ... If possible use low capacity motor for above condition. If possible switch off the motor.

Suggest the type of cement used for the following : (i) For modular construction where form work needs to be removed early for re-use. . (ii) Mass concreting such as construction of dam. (iii) Decorative works in external surfaces of building. (iv) Cementing the oil well.

Description : Suggest the type of cement used for the following : (i) For modular construction where form work needs to be removed early for re-use. . (ii) Mass concreting such as construction of dam. (iii) Decorative works in external surfaces of building. (iv) Cementing the oil well.

Last Answer : i) For modular construction where form work needs to be removed early for reuse. – Rapid Hardening Cement ii) Mass concreting such as construction of dam. – Low heat cement. iii) Decorative works in external surfaces of building – Coloured cement. iv) Cementing the oil well. – Oil Well Cement. 

Pick up the correct statements from the following: (A) Cracks appear on the plastered surface in the form of hair cracks (B) In brick work, the efflorescence is removed by applying a solution of zinc sulphate and water (C) Excessive thermal variations in the backing or plaster causes the plaster to fall (D) All the above

Description : Pick up the correct statements from the following: (A) Cracks appear on the plastered surface in the form of hair cracks (B) In brick work, the efflorescence is removed by applying a solution ... Excessive thermal variations in the backing or plaster causes the plaster to fall (D) All the above

Last Answer : Answer: Option D

Pick up the incorrect statement from the following: (A) Horizontal D.P.C. is provided at plinth level in internal walls (B) D.P.C. is provided under door and verandah openings (C) Vertical D.P.C. is not provided in internal walls (D) Cement concrete is a rigid damp-proofing material

Description : Pick up the incorrect statement from the following: (A) Horizontal D.P.C. is provided at plinth level in internal walls (B) D.P.C. is provided under door and verandah openings (C) Vertical D.P.C. is not provided in internal walls (D) Cement concrete is a rigid damp-proofing material

Last Answer : Answer: Option B

Suggest the minimum grade of concrete for following exposure condition. i) RCC work ii) Water retaining structure iii) Sea water construction iv) Pre-stressed concrete

Description : Suggest the minimum grade of concrete for following exposure condition. i) RCC work ii) Water retaining structure iii) Sea water construction iv) Pre-stressed concrete

Last Answer : Minimum grade of concrete for following exposure condition: i) RCC work = M 20 ii) Water retaining structure = M 25 iii) Sea water construction = M 20 for PCC and M 30 for RCC iv) Pre-stressed concrete = M 30

Write type of chip formed with following factors. (i) High rake angle (ii) High cutting speed (iii) Small depth of cut (iv) Low cutting speed (v) Large depth of cut (vi) Low rake angle

Description : Write type of chip formed with following factors. (i) High rake angle (ii) High cutting speed (iii) Small depth of cut (iv) Low cutting speed (v) Large depth of cut (vi) Low rake angle

Last Answer : (i) High rake angle : Continuous chips (ii) High cutting speed : Continuous chips (iii) Small depth of cut : Continuous chips (iv) Low cutting speed :Continuous chips with built up edge (v) ... cut : Continuous chips with built up edge (vi) Low rake angle :Continuous chips with built up edge

Compare pin type and suspension insulators on given points: (i) Position of insulator on cross arm. (ii) Position of conductor on insulator. (iii) Reaction on cross arm. (iv) Possibility of flash over due to large birds (v) Maintenance/Replacement cost (vi) Maximum voltage level (vii) Effect on height of supporting structure. (viii) Life

Description : Compare pin type and suspension insulators on given points: (i) Position of insulator on cross arm. (ii) Position of conductor on insulator. (iii) Reaction on cross arm. (iv) Possibility of ... Replacement cost (vi) Maximum voltage level (vii) Effect on height of supporting structure. (viii) Life 

Last Answer : S.No  Points Pin Type insulator Suspension or Disc Type insulator 1 Position of insulator on cross arm It is fixed on top of cross arm by using galvanized steel pin. So it is ... so to maintain minimum ground clearance height of pole increase.  8 Life Less More

Identify type of BJT configuration having following features : (i) BJT configuration having the least current gain. (ii) KIT configuration called as voltage follower. (iii) BJT configuration having current gain less than one. (iv) BJT configuration suitable for impedance matching. (v) BIT configuration suitable for voltage amplification. (vi) BJT configuration having the least output impedance.

Description : Identify type of BJT configuration having following features : (i) BJT configuration having the least current gain. (ii) KIT configuration called as voltage follower. (iii) BJT ... configuration suitable for voltage amplification. (vi) BJT configuration having the least output impedance.  

Last Answer : (i) BJT configuration having the least current gain : Common Base Configuration  (ii) KIT configuration called as voltage follower: Common Collector Configuration  (iii) BJT ... Emitter Configuration  (vi) BJT configuration having the least output impedance: Common Collector Configuration

Check whether the following are quadratic equations: (i) (x+ 1)2=2(x-3) (ii) x – 2x = (- 2) (3-x) (iii) (x – 2) (x + 1) = (x – 1) (x + 3) (iv) (x – 3) (2x + 1) = x (x + 5) (v) (2x – 1) (x – 3) = (x + 5) (x – 1) (vi) x2 + 3x + 1 = (x – 2)2 (vii) (x + 2)3 = 2x(x2 – 1) (viii) x3 -4x2 -x + 1 = (x-2)3 -Maths 10th

Description : Check whether the following are quadratic equations: (i) (x+ 1)2=2(x-3) (ii) x - 2x = (- 2) (3-x) (iii) (x - 2) (x + 1) = (x - 1) (x + 3) (iv) (x - 3) (2x + 1) = x (x + 5) (v) (2x - 1) (x - 3) = (x ... vi) x2 + 3x + 1 = (x - 2)2 (vii) (x + 2)3 = 2x(x2 - 1) (viii) x3 -4x2 -x + 1 = (x-2)3 -Maths 10th

Last Answer : this is the correct answer!

I have some matchsticks set up like this: I + XI = X. If you do not know Roman numerals, here is a quick starter: I=1 II=2 III=3 IV=4 V=5 VI=6 VII=7 VIII=8 IX=9 X=10 XI=11 XII=12 XIII=13 XIV=14 XV=15...... Of course, I + XI = X is wrong. You are told to move the minimum number of matchsticks to make the question correct. So, how many do you have to move? -Riddles

Description : I have some matchsticks set up like this: I + XI = X. If you do not know Roman numerals, here is a quick starter: I=1 II=2 III=3 IV=4 V=5 VI=6 VII=7 VIII=8 IX=9 X=10 XI=11 ... are told to move the minimum number of matchsticks to make the question correct. So, how many do you have to move? -Riddles

Last Answer : Most people would get to one move at the least, but the real answer is zero moves. If you rotate the whole question around 180 degrees, it will display this: X = IX + I

In ΔABC and ΔDEF, AB = DE, AB || DE, BC = EF and BC || EF. Vertices A, B and C are joined to vertices D, E and F respectively (see Fig. 8.22). Show that (i) quadrilateral ABED is a parallelogram (ii) quadrilateral BEFC is a parallelogram (iii) AD || CF and AD = CF (iv) quadrilateral ACFD is a parallelogram (v) AC = DF (vi) ΔABC ≅ ΔDEF. -Maths 9th

Description : In ΔABC and ΔDEF, AB = DE, AB || DE, BC = EF and BC || EF. Vertices A, B and C are joined to vertices D, E and F respectively (see Fig. 8.22). Show that (i) quadrilateral ABED is a parallelogram ( ... CF and AD = CF (iv) quadrilateral ACFD is a parallelogram (v) AC = DF (vi) ΔABC ≅ ΔDEF. -Maths 9th

Last Answer : . Solution: (i) AB = DE and AB || DE (Given) Two opposite sides of a quadrilateral are equal and parallel to each other. Thus, quadrilateral ABED is a parallelogram (ii) Again BC = EF and BC || EF ... (Given) BC = EF (Given) AC = DF (Opposite sides of a parallelogram) , ΔABC ≅ ΔDEF [SSS congruency]

For the complex [Fe(en)2Cl2], Cl, (en = ethylene diamine), identify (i) the oxidation number of iron, (ii) the hybrid orbitals and the shape of the complex, (iii) the magnetic behaviour of the complex, (iv) the number of geometrical isomers, (v) whether there is an optical isomer also, and (vi) name of the complex. (At. no. of Fe = 26) \ -Chemistry

Description : For the complex [Fe(en)2Cl2], Cl, (en = ethylene diamine), identify (i) the oxidation number of iron, (ii) the hybrid orbitals and the shape of the complex, (iii) the magnetic behaviour of the complex, (iv) ... an optical isomer also, and (vi) name of the complex. (At. no. of Fe = 26) \ -Chemistry

Last Answer : i) [Fe(en)2Cl2] Cl or x + 0 + 2 (-1) + (-1) = 0 x + (- 3) = 0 or x = + 3 ∴ Oxidation number of iron, x = + 3 (ii) The complex has two bidentate ligands and two ... )2Cl2] Cl, only cis-isomer shows optical isomerism. (vi) Name of complex: Dichloridobis (ethane-1, 2- diamine) Iron (III) chloride

What percentage is (i) Rs 15 of Rs 120? (ii) 36 minutes of 2 hours? (iii) 8 hours of 2 days (iv) 160 metres of 4 km? (v) 175 mL of 1 litre? (vi) 25 paise of Rs 4? -Maths

Description : What percentage is (i) Rs 15 of Rs 120? (ii) 36 minutes of 2 hours? (iii) 8 hours of 2 days (iv) 160 metres of 4 km? (v) 175 mL of 1 litre? (vi) 25 paise of Rs 4? -Maths

Last Answer : answer:

Find: (i) 25% of Rs 76 (ii) 20% of Rs 132 (iii) 7.5% of 600 m (iv) 313% of 90 km (v) 8.5% of 5 kg (vi) 20% of 12 litres -Maths

Description : Find: (i) 25% of Rs 76 (ii) 20% of Rs 132 (iii) 7.5% of 600 m (iv) 313% of 90 km (v) 8.5% of 5 kg (vi) 20% of 12 litres -Maths

Last Answer : answer:

Find: (i) 32% of 425 (ii) 1623% of 16 (iii) 6.5% of 400 (iv) 136% of 70 (v) 2.8% of 35 (vi) 0.6% of 45 -Maths

Description : Find: (i) 32% of 425 (ii) 1623% of 16 (iii) 6.5% of 400 (iv) 136% of 70 (v) 2.8% of 35 (vi) 0.6% of 45 -Maths

Last Answer : answer:

Convert each of the following fraction into a percentage: (i) 47 100 (ii) 9 20 (iii) 3 8 (iv) 8 125 (v) 19 500 (vi) 4 15 (vii) 2 3 (viii) 1 3 5 -Maths

Description : Convert each of the following fraction into a percentage: (i) 47 100 (ii) 9 20 (iii) 3 8 (iv) 8 125 (v) 19 500 (vi) 4 15 (vii) 2 3 (viii) 1 3 5 -Maths

Last Answer : We have the following: (i) 47100=47100×100% = 47% (ii) 920=920×100% =9×5%= 45% (iii) 38=38×100% =3×252%=752%=3712% (iv) 8125=8125×100%=8×45%=325%=6.4% (v) ... ;203%=803%=2623% (vii) 23=23×100%=2003%=6623% (viii) 135=85=85×100%=(8×20)%=160%

Convert each of the following into a fraction: (i) 32% (ii) 614% (iii) 2623% (iv) 120% (v) 6.25% (vi) 0.8% (vii) 0.06% (viii) 22.75% -Maths

Description : Convert each of the following into a fraction: (i) 32% (ii) 614% (iii) 2623% (iv) 120% (v) 6.25% (vi) 0.8% (vii) 0.06% (viii) 22.75% -Maths

Last Answer : answer:

Evaluate each of the following: (i) (103)3 (ii) (98)3 (iii) (9.9)3 (iv) (10.4)3 (v) (598)3 (vi) (99)3 -Maths 9th

Description : Evaluate each of the following: (i) (103)3 (ii) (98)3 (iii) (9.9)3 (iv) (10.4)3 (v) (598)3 (vi) (99)3 -Maths 9th

Last Answer : answer:

Cold dil. `H_(2)SO_(4)` will completely dissolve : (i) Pb (ii) `Fe_(3)O_(4)` (iii) Fe (iv) Cu (v) Mg (vi) MgO (vii) `CoCO_(3)` (viii) `CuCO_(2)` (ix)

Description : Cold dil. `H_(2)SO_(4)` will completely dissolve : (i) Pb (ii) `Fe_(3)O_(4)` (iii) Fe (iv) Cu (v) Mg (vi) MgO (vii) `CoCO_(3)` (viii) `CuCO_(2)` (ix)

Last Answer : Cold dil. `H_(2)SO_(4)` will completely dissolve : (i) Pb (ii) `Fe_(3)O_(4)` (iii) Fe (iv) Cu (v) ... ) `CoCO_(3)` (viii) `CuCO_(2)` (ix) `SrCO_(3)`

Cold conc. `HNO_(3)` will completely dissolve: (i) Pb (ii) `Pb_(3)O_(4)` (iii) Fe (iv) Sn (v) Mg (vi) MgO (vii) Hg (viii) Au (ix) Ag (x) Pt

Description : Cold conc. `HNO_(3)` will completely dissolve: (i) Pb (ii) `Pb_(3)O_(4)` (iii) Fe (iv) Sn (v) Mg (vi) MgO (vii) Hg (viii) Au (ix) Ag (x) Pt

Last Answer : Cold conc. `HNO_(3)` will completely dissolve: (i) Pb (ii) `Pb_(3)O_(4)` (iii) Fe (iv) Sn (v) Mg (vi) MgO (vii) Hg (viii) Au (ix) Ag (x) Pt

(i) `NH_(3)` (ii) `N_(2)H_(4)` (iii) `HN_(3)` (iv) `PH_(3)` (v) `H_(2)S` (vi) `AsH_(3)` (vii) `SbH_(3)` (viii) `H_(2)Se` (ix) `H_(2)Te` Number of mole

Description : (i) `NH_(3)` (ii) `N_(2)H_(4)` (iii) `HN_(3)` (iv) `PH_(3)` (v) `H_(2)S` (vi) `AsH_(3)` (vii) `SbH_(3)` (viii) `H_(2)Se` (ix) `H_(2)Te` Number of mole

Last Answer : (i) `NH_(3)` (ii) `N_(2)H_(4)` (iii) `HN_(3)` (iv) `PH_(3)` (v) `H_(2) ... lone pair of electrons on the central atom is present in pure s-orbital

Cold dil. `H_(2)SO_(4)` will completely dissolve : (i) Pb (ii) `Fe_(3)O_(4)` (iii) Fe (iv) Cu (v) Mg (vi) MgO (vii) `CoCO_(3)` (viii) `CuCO_(2)` (ix)

Description : Cold dil. `H_(2)SO_(4)` will completely dissolve : (i) Pb (ii) `Fe_(3)O_(4)` (iii) Fe (iv) Cu (v) Mg (vi) MgO (vii) `CoCO_(3)` (viii) `CuCO_(2)` (ix)

Last Answer : Cold dil. `H_(2)SO_(4)` will completely dissolve : (i) Pb (ii) `Fe_(3)O_(4)` (iii) Fe (iv) Cu (v) ... ) `CoCO_(3)` (viii) `CuCO_(2)` (ix) `SrCO_(3)`

Cold conc. `HNO_(3)` will completely dissolve: (i) Pb (ii) `Pb_(3)O_(4)` (iii) Fe (iv) Sn (v) Mg (vi) MgO (vii) Hg (viii) Au (ix) Ag (x) Pt

Description : Cold conc. `HNO_(3)` will completely dissolve: (i) Pb (ii) `Pb_(3)O_(4)` (iii) Fe (iv) Sn (v) Mg (vi) MgO (vii) Hg (viii) Au (ix) Ag (x) Pt

Last Answer : Cold conc. `HNO_(3)` will completely dissolve: (i) Pb (ii) `Pb_(3)O_(4)` (iii) Fe (iv) Sn (v) Mg (vi) MgO (vii) Hg (viii) Au (ix) Ag (x) Pt

(i) `NH_(3)` (ii) `N_(2)H_(4)` (iii) `HN_(3)` (iv) `PH_(3)` (v) `H_(2)S` (vi) `AsH_(3)` (vii) `SbH_(3)` (viii) `H_(2)Se` (ix) `H_(2)Te` Number of mole

Description : (i) `NH_(3)` (ii) `N_(2)H_(4)` (iii) `HN_(3)` (iv) `PH_(3)` (v) `H_(2)S` (vi) `AsH_(3)` (vii) `SbH_(3)` (viii) `H_(2)Se` (ix) `H_(2)Te` Number of mole

Last Answer : (i) `NH_(3)` (ii) `N_(2)H_(4)` (iii) `HN_(3)` (iv) `PH_(3)` (v) `H_(2) ... lone pair of electrons on the central atom is present in pure s-orbital

How many of following metals impart a characteristic colour to the Bunsen flame ? `(i) Na " " (ii) Li " " (iii) K " " (iv) Ba` `(v) Sr " " (vi) Mg " "

Description : How many of following metals impart a characteristic colour to the Bunsen flame ? `(i) Na " " (ii) Li " " (iii) K " " (iv) Ba` `(v) Sr " " (vi) Mg " "

Last Answer : How many of following metals impart a characteristic colour to the Bunsen flame ? `(i) Na " " (ii) Li " " (iii) K ... ix) `Be " " (x )Ca " " (x i)Cu`

Number of oxide orwesd among , (i) Cassiterite (ii) pyrolusite (iii) Kieserite (iv) Azurite (V) chromite (vi) siderite are.

Description : Number of oxide orwesd among , (i) Cassiterite (ii) pyrolusite (iii) Kieserite (iv) Azurite (V) chromite (vi) siderite are.

Last Answer : Number of oxide orwesd among , (i) Cassiterite (ii) pyrolusite (iii) Kieserite (iv) Azurite (V) chromite (vi) siderite are.

How many of the following are oxides ores (i) Carnalite (ii) Cuprite (iii) Cassiterite (iv) Chromite (v) Cinnabar (vi) Calamine (vii) Cerussite (Viii)

Description : How many of the following are oxides ores (i) Carnalite (ii) Cuprite (iii) Cassiterite (iv) Chromite (v) Cinnabar (vi) Calamine (vii) Cerussite (Viii)

Last Answer : How many of the following are oxides ores (i) Carnalite (ii) Cuprite (iii) Cassiterite (iv) ... (vii) Cerussite (Viii) Chalocopyrite (ix) Chalcocite

Name the quantities which are measured by the following units. (i) Newton (ii) Joule (iii) Watt (iv) Volt (v) Light year (vi) Angstrom (vii) Acre-foot (viii) Becquerel (ix) Hertz (x) Cusec

Description : Name the quantities which are measured by the following units. (i) Newton (ii) Joule (iii) Watt (iv) Volt (v) Light year (vi) Angstrom (vii) Acre-foot (viii) Becquerel (ix) Hertz (x) Cusec

Last Answer : Answers: (i) Force (ii) Work Energy (iii) Power of electricity (iv) Potential difference (v) Distance of stars and planets (vi) Length (vii) Volume (viii) Radioactivity (ix) Frequency (x) Rate of flow of water

Which quantity do the following units measure: (i) Volt (ii) Coulomb (iii) Walt (iv) Ohm (v) Mho (vi) Ampere (vii) Dyne (viii) Celsius (ix) Joule (x) Calorie

Description : Which quantity do the following units measure: (i) Volt (ii) Coulomb (iii) Walt (iv) Ohm (v) Mho (vi) Ampere (vii) Dyne (viii) Celsius (ix) Joule (x) Calorie

Last Answer : Answers: (i) Voltage (ii) Charge of Electricity (iii) Power (iv) Resistance (v) Conductivity (vi) Current (vii) Force (viii) Temperature (ix) Energy (x) Heat

Arrange the following steps to form a basic Engineering Process Model.i. Test ii. Design iii. Install iv. Specification v. Manufacture vi. Maintain a) 2, 4, 5, 1, 6, 3 b) 4, 2, 5, 1, 3, 6 c) 2, 4, 5, 1, 3, 6 d) 4, 2, 5, 1, 6, 3

Description : Arrange the following steps to form a basic Engineering  Process Model. i. Test ii. Design iii. Install iv. Specification v. Manufacture vi. Maintain a) 2, 4, 5, 1, 6, 3 b) 4, 2, 5, 1, 3, 6 c) 2, 4, 5, 1, 3, 6 d) 4, 2, 5, 1, 6, 3

Last Answer : a) 2, 4, 5, 1, 6, 3

The figure given below depicts a diagrammatic sectional view of the human female reproductive system. Which set of three parts out of I-VI have been correctly identified? I II III V VI IV (a) (II) Endometrium, (III) Infundibulum, (IV) Fimbriae (b) (III) Infundibulum, (IV) Fimbriae, (V) Cervix (c) (IV) Oviducal funnel, (V) Uterus, (VI) Cervix (d) (I) Perimetrium, (II) Myometrium, (III) Fallopian tube

Description : The figure given below depicts a diagrammatic sectional view of the human female reproductive system. Which set of three parts out of I-VI have been correctly identified? I II III V VI IV (a) (II) ... , (V) Uterus, (VI) Cervix (d) (I) Perimetrium, (II) Myometrium, (III) Fallopian tube

Last Answer : (b) (III) Infundibulum, (IV) Fimbriae, (V) Cervix

Identify the components labelled A, B, C and D in the diagram below from the list (i) to (viii) given along withComponents : (i) Cristae of mitochondria (ii) Inner membrane of mitochondria (iii) Cytoplasm (iv) Smooth endoplasmic reticulum (v) Rough endoplasmic reticulum (vi) Mitochondrial matrix (vii) Cell vacuole (viii) Nucleus The correct components are: A B C D (a) (v) (iv) (viii) (iii) (b) (i) (iv) (viii) (vi) (c) (vi) (v) (iv) (vii) (d) (v) (i) (iii) (ii)

Description : Identify the components labelled A, B, C and D in the diagram below from the list (i) to (viii) given along with Components : (i) Cristae of mitochondria (ii) Inner membrane of mitochondria (iii) Cytoplasm (iv) Smooth endoplasmic ... viii) (vi) (c) (vi) (v) (iv) (vii) (d) (v) (i) (iii) (ii)

Last Answer : (a) (v) (iv) (viii) (iii)

Which of the following instruction is of logical instructions? i) CPL A ii) JC rel iii) DA A iv) ANL A, Rn v) RR A vi) CPL bit a) i, v b) v, iii, I c) iv, ii d) v, iii, ii

Description : Which of the following instruction is of logical instructions? i) CPL A ii) JC rel iii) DA A iv) ANL A, Rn v) RR A vi) CPL bit a) i, v b) v, iii, I c) iv, ii d) v, iii, ii

Last Answer : c) iv, i

A company has to choose between two projects whose cash flows are as indicated below; Project 1: i. Investment – Rs. 15 Lakhs ii. Annual cost savings – Rs. 4 lakhs. iii. Bi-annual maintenance cost – Rs. 50,000/- iv. Reconditioning and overhaul during 5th year: 6 lakhs v. Life of the project – 8 years vi. Salvage value – Rs. 5 lakhs Project 2: vii. Investment – Rs. 14 Lakhs viii. Annual cost savings – Rs. 3.5 lakhs. ix. Annual Maintenance cost – Rs. 20,000/- x. Reconditioning and overhaul during 4th year: 5 lakhs xi. Life of the project – 8 years xii. Salvage Value- 2 lakhs Which project should the company choose? The annual discount rate is 12

Description :  A company has to choose between two projects whose cash flows are as indicated  below; Project 1:  i. Investment - Rs. 15 Lakhs ii. Annual cost savings - Rs. 4 lakhs. iii. Bi-annual ... years xii. Salvage Value- 2 lakhs Which project should the company choose? The annual discount rate is 12

Last Answer : Year Project 1 Project 2 Outgo Saving NPV Outgo Saving NPV 0 15.0 0 =-15.0 14.0 0 = -14 1 0 4.0 = (4 / (1+.12)1 = 3.571 0.2 3.5 = (3.3 / (1+.12)1 = 2.95 2 0.5 4.0 = (3.5 / (1+.12)2 = 2.79 0.2 3.5 ... (1+.12)8 = 3.43 0.2 5.5  (3.5+2) = (5.3 / (1+.12)8 = 2.14 NPV = + 2.301 @12% = + 0.15

Draw symbol of (i) Tray Dryer (ii) Plate column (iii) Packed column (iv) Jaw crusher (v) Strirrer (vi) Ball mill.

Description : Draw symbol of (i) Tray Dryer (ii) Plate column (iii) Packed column (iv) Jaw crusher (v) Strirrer (vi) Ball mill.

Last Answer : i)Tray dryer:   ii)Plate column:    iii)Packed column:   iv) Jaw crusher:   v) Stirrer:   vi) Ball mill  

Write the suitable cutter for carrying following operations on milling machine (i) Gear Tooth (ii) Parting off (iii) Keyway (iv) V-grooves (v) Rounding of corner (vi) Cutting of narrow slot and groove

Description : Write the suitable cutter for carrying following operations on milling machine (i) Gear Tooth (ii) Parting off (iii) Keyway (iv) V-grooves (v) Rounding of corner (vi) Cutting of narrow slot and groove

Last Answer : (i) Gear Tooth : Form milling cutter, Cylindrical type or End mill type, Gear cutter. (ii) Parting off: Slitting Cutter (iii) Keyway : Staggered teeth side milling cutter, End mill cutter, key ... milling cutter. Selection of a cutter depends upon type and size of slot or groove to be produced. 

Compare detonation and diesel knock on the basis of (i) Fuel Ignition Temperature (ii) Compression Ratio (iii) Speed (iv) inlet temperature (v) inlet pressure (vi) cylinder wall temperature (vii) cylinder size

Description : Compare detonation and diesel knock on the basis of (i) Fuel Ignition Temperature (ii) Compression Ratio (iii) Speed (iv) inlet temperature (v) inlet pressure (vi) cylinder wall temperature (vii) cylinder size 

Last Answer : Comparison between detonation and diesel knock: Parameter To avoid Detonation in SI Engine  To avoid Diesel knock i) Fuel Ignition Temperature High Low ii) Compression Ratio ... Cylinder wall temperature Low High viii) Cylinder size Small Large

Which of the following strings would match the regular expression: p+[3-5]*[xyz]? I. p443y Il. p6y III. 3xyz IV. p35z V. p353535x Vl. ppp5 (1) I, III and Vl only (2) IV, V and VI only (3) II, IV and V only (4) I, IV and V only

Description : Which of the following strings would match the regular expression: p+[3-5]*[xyz]? I. p443y Il. p6y III. 3xyz IV. p35z V. p353535x Vl. ppp5 (1) I, III and Vl only (2) IV, V and VI only (3) II, IV and V only (4) I, IV and V only

Last Answer : Answer: 4

Define following terms (i) Kinematic link (ii) Kinematic pair (iii) Kinematic chain (iv) Mechanism (v) Machine (vi) Inversion

Description : Define following terms (i) Kinematic link (ii) Kinematic pair (iii) Kinematic chain (iv) Mechanism (v) Machine (vi) Inversion

Last Answer : (i) Kinematic link: Each part of a machine, which moves relative to some other part, is known as a kinematic link.  (ii) Kinematic pair: The two links or elements of a machine, ... obtaining different mechanisms by fixing different links in a kinematic chain is known as inversion of the mechanism.

Identify the sensors for the following : i) Wind speed ii) RPM of generator shaft iii) Temperature in generator iv) Cable untwisting v) Vibration vi) Wind direction

Description : Identify the sensors for the following : i) Wind speed ii) RPM of generator shaft iii) Temperature in generator iv) Cable untwisting v) Vibration vi) Wind direction

Last Answer : i) Wind Speed : Anemometer. ii) RPM of Generator Shaft: Accelerometers. iii) Temperature in Generator: Thermistor, thermocouple, RTD. iv) Cable Untwisting : Cable Twisting sensor. v) Vibration : Accelerometer, piezoelectric. vi) Wind direction: Wind vane.

Perform following number system conversion : (i) (589)10 = ( )2 (ii) (101101)2 = ( )16 (iii) (413)8 = ( )2 (iv) (5AF)16 = ( )10 (v) (AC8)16 = ( )2 (vi) (106)8 = ( )10

Description : Perform following number system conversion : (i) (589)10 = ( )2 (ii) (101101)2 = ( )16 (iii) (413)8 = ( )2 (iv) (5AF)16 = ( )10 (v) (AC8)16 = ( )2 (vi) (106)8 = ( )10

Last Answer : (i) (589)10 = (1001001101)2 (ii) (101101)2 = ( 2D )16 (iii) (413)8 = (100001011 )2 (iv) (5AF)16 = (1455 )10 (v) (AC8)16 = (101011001000)2 (vi) (106)8 = (70)10