Description : Pick out the wrong statement. (A) Wrought iron contains about 0.02% carbon (B) Wrought iron cannot be easily forged and welded (C) The chilled cast iron does not contain graphite (D) Spheroidal grey cast iron contains graphite flakes
Last Answer : (B) Wrought iron cannot be easily forged and welded
Description : __________ iron is produced by the annealing of white cast iron. (A) Malleable (B) Nodular (C) Ductile (D) Grey
Last Answer : (A) Malleable
Description : Annealing of white cast iron produces __________ iron. (A) Grey (B) Nodular (C) Malleable (D) Spheroidal
Last Answer : (C) Malleable
Description : Addition of small amount of __________ to grey cast iron is done to produce nodular grey cast iron. (A) Manganese (B) Phosphorous (C) Magnesium (D) Chromium
Last Answer : Option C
Description : The graphite in grey irons exists in the form of flakes which act as stress-raisers under tensile loading and consequently grey irons have relatively low tensile strength and ductility. Still grey iron is extensively used in engineering. Why ?
Last Answer : (a) Cheapness. (B) Low melting point and high fluidity making it suitable for castings of intricate shape. (c) Relatively good erosion and corrosion resistance. (d) High damping capacity, with respect to vibration. (e) Relatively good mechanical properties under compressive loading.
Description : Which one has the maximum tensile strength out of the following? (A) Nodular cast iron (B) Pig iron (C) White cast iron (D) Grey cast iron
Last Answer : (A) Nodular cast iron
Description : Addition of silicon to cast iron (A) Promotes graphite module formation (B) Improves its ductility (C) Does not promote graphite flakes formation (D) Increases the fluidity of molten metal
Last Answer : Option D
Description : Oxyacetylene reducing flame is used while carrying out welding on (A) Alloy steel (B) Grey cast iron (C) Mild steel (D) High carbon steel
Last Answer : (C) Mild steel
Description : __________ iron is produced, when molten pig iron is chilled suddenly. (A) White cast (B) Grey cast (C) Wrought (D) None of these
Last Answer : (A) White cast
Description : __________ iron is produced, when molten pig iron is allowed to cool gradually. (A) White cast (B) Grey cast (C) Wrought (D) None of these
Last Answer : (B) Grey cast
Description : __________ of grey cast iron produces white cast iron. (A) Tempering (B) Rapid heating (C) Rapid cooling (D) Slow cooling
Last Answer : Option B
Description : Which material is suitable for shaft material? a. High speed steel b. Stainless steel or high carbon steel c. Grey cast iron d. Steel having approx. 0.4% carbon and 0.8% manganese
Last Answer : d. Steel having approx. 0.4% carbon and 0.8% manganese
Description : ______is extensively used for those portions of magnetic circuit which carry steady flux and need superior mechanical properties ? (a) Grey cast-iron (b) Cast steel (c) High carbon steel (d) Stainless steel
Last Answer : (b) Cast steel
Description : With increase in carbide/graphite ratio in cast iron, its (A) Hardness & brittleness increases (B) Ductility decreases (C) Both (A) and (B) (D) Neither (A) nor (B)
Last Answer : (C) Both (A) and (B)
Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin
Last Answer : (D) Brass, cast iron, mild steel and tin
Description : H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware
Last Answer : (A) Aluminium, mild steel, stainless steel, concrete & tin
Description : Presence of high amount of silicon in cast iron (A) Suppresses the decomposition of Fe3C (B) Increases the formation of graphite (C) Increases the contraction of the metal (D) Reduces its fluidity
Last Answer : (B) Increases the formation of graphite
Description : White cast iron as compared to grey cast iron is (A) More durable (B) Very brittle (C) Very hard (D) All (A), (B) & (C)
Last Answer : (D) All (A), (B) & (C)
Description : Out of the following, the best material capable of withstanding shock & vibration without the danger of cracking is (A) Malleable iron (B) Grey cast iron (C) Chilled cast iron (D) White cast iron
Last Answer : Option A
Description : Carbon is present in the uncombined (graphitic) form in case of (A) Cast iron (B) Steel (C) Ferroalloy (D) None of these
Last Answer : (A) Cast iron
Description : The cast iron when heated to red heat with powdered red haematite in an oven for increasing its toughness, is converted to (A) Grey cast iron (B) White cast iron (C) Mottled cast iron (D) Toughed cast iron
Last Answer : Answer: Option C
Description : Aqueous nitric acid is stored in __________ vessel. (A) Plain carbon steel (B) Stainless steel (C) Cast iron (D) Thermosetting plastic material
Last Answer : (C) Cast iron
Description : Maximum carbon content in cast iron is __________ percent. (A) 3.8 (B) 5.2 (C) 4.8 (D) 4.3
Last Answer : (D) 4.3
Description : Cupola produces __________ iron. (A) Pig (B) Cast (C) Wrought (D) Carbon free
Last Answer : (B) Cast
Description : Cast iron contains __________ percent carbon. (A) 2.5 (B) 3.75 (C) 4.75 (D) 5.25
Description : Carbon is present in steel wholly in the (A) Combined form (B) Free state as graphite (C) Both (A) and (B) (D) Neither (A) nor (B)
Last Answer : (A) Combined form
Description : For preparation of porous bearings by powder metallurgy, preferred particle shape is (A) Spherical (B) Nodular (C) Irregular (D) No preferred shape
Last Answer : (A) Spherical
Description : Which one contains the least percentage of carbon? (A) Wrought iron (B) High speed steel (C) Cast iron (D) Pig iron
Last Answer : (A) Wrought iron
Description : Which of the following has the least carbon percentage? (A) Low carbon steel (B) Mild steel (C) Wrought iron (D) White cast iron
Last Answer : (C) Wrought iron
Description : Carbon percentage is the same in cast iron and (A) Wrought iron (B) Pig iron (C) Mild steel (D) High silicon (14%) iron
Last Answer : (B) Pig iron
Description : Which one is remelted and poured into moulds to get cast iron? (A) Wrought iron (B) Pig iron (C) Low carbon steel (D) Mild steel
Description : Water gas generator is made of (A) Carbon steel-brick lined (B) Stainless steel-lead lined (C) Cast iron (D) High carbon steel-porcelain lined
Last Answer : (A) Carbon steel-brick lined
Description : In the Kraft (sulphate) process for the paper manufacture, the digestor is made of (A) Cast iron (B) Stainless steel (C) Karbate carbon (D) Wrought iron
Last Answer : (B) Stainless steel
Description : Which of the following has the highest compressive strength? (A) Wrought iron (B) Cast iron (C) Mild steel (D) High carbon steel
Last Answer : (D) High carbon steel
Description : Ball bearings are generally made of (A) Plain carbon steel (B) Chrome carbon steel (C) Stainless steel (D) Malleable cast iron
Last Answer : (B) Chrome carbon steel
Description : Galvanising is generally done on (A) Non-ferrous metals (B) Low carbon steel (C) Stainless steel (D) Cast iron
Last Answer : (B) Low carbon steel
Description : Mixing vessel used for the chlorination of methane to produce methyl chloride is made of (A) Copper (B) Cast iron (C) Aluminium (D) High carbon steel
Last Answer : (B) Cast iron
Description : Which of the following has the least value of ultimate tensile strength (UTS)? (A) Medium carbon steel (B) High carbon steel (C) Cast iron (D) Wrought iron Answer: Option C
Description : Which of the following has the least value of ultimate tensile strength (UTS)? (A) Medium carbon steel (B) High carbon steel (C) Cast iron (D) Wrought iron
Description : Annealing of cast iron (A) Softens it to facilitate machining (B) Decreases the free carbon (C) Increases the strength (D) None of these
Description : __________ iron is the purest form of iron. (A) Cast (B) Wrought (C) Pig (D) High silicon
Last Answer : (B) Wrought
Description : Commercial fertilisers are available mostly in the form of (A) Powder (B) Granules (C) Lumps (D) Flakes
Last Answer : (B) Granules
Description : Which of the following is the purest form of iron? (A) Cast iron (B) Wrought iron (C) Mild steel (D) High carbon steel
Last Answer : Answer: Option B
Description : A 60-year-old man was diagnosed last year with adenocarcinoma of the lung, and a 4 cm mass lesion was treated with a right lower lobectomy. He now has an ... 2) Membranous glomerulonephritis 3) Minimal change glomerulonephritis 4) Nodular glomerulosclerosis 5) Rapidly progressive glomerulonephritis
Last Answer : Answers-2 Most cases of membranous GN are idiopathic, but in some patients there is a history of an infection or a malignancy (usually lung) with antigenemia.
Description : Low uptake of 123I on the thyroid uptake scan would be an expected finding in: 1) A solitary toxic nodule 2) A multi-nodular toxic goitre 3) Amiodarone induced thyrotoxicosis type 1 4) DeQuervain's thyroiditis 5) Graves' thyrotoxicosis
Last Answer : Answers-4 DeQuervain's thyroiditis is classically associated with low or absent 123I (the 131 radioactive isotope of iodine) uptake. The others will have high or normal uptake. In particular type ... may be distinguished from the thyroiditis of type 2 by the normal or high uptake scan.
Description : A wave in which the movement of the wave’s medium is perpendicular to the movement of the wave traveling through the medium A. Transverse waves B. Compression waves C. Nodular Waves D. Ocean Waves
Last Answer : A. Transverse waves
Description : The most significant finding in clinical evaluation of parotid mass may be accompanying,** A. Lympha adenopathy B. Nodular consistency C. Facial paralysis D. Slow progressive enlargement E. Xerostomia
Last Answer : C. Facial paralysis
Description : Serum TSH levels are high in most cases of: A. Myxoedema B. Grave’s disease C. Carcinoma thyroid D. Toxic nodular goiter
Last Answer : A. Increases vascularity
Description : .19 Serum TSH levels are high in most cases of: A. Myxoedema B. Grave’s disease C. Carcinoma thyroid D. Toxic nodular goiter
Last Answer : A. Myxoedema