Carbon is present in the uncombined (graphitic) form in case of (A) Cast iron (B) Steel (C) Ferroalloy (D) None of these

Carbon is present in the uncombined (graphitic) form in case of
(A) Cast iron
(B) Steel
(C) Ferroalloy
(D) None of these
by

1 Answer

Answer :

(A) Cast iron
by

Related questions

Which of the following brushes can be used for high values of current density ? (a) Metal graphite brushes (b) Hard carbon brushes (c) Electro-graphitic brushes (d) Natural graphite brushes

Description : Which of the following brushes can be used for high values of current density ? (a) Metal graphite brushes (b) Hard carbon brushes (c) Electro-graphitic brushes (d) Natural graphite brushes

Last Answer : (a) Metal graphite brushes

_____ brushes are fragile and cause excessive wear of commutator, (a) Natural graphite (b) Hard carbon (c) Electro graphitic (d) Metal graphite

Description : _____ brushes are fragile and cause excessive wear of commutator, (a) Natural graphite (b) Hard carbon (c) Electro graphitic (d) Metal graphite

Last Answer : (a) Natural graphite

Carbon is present in the combined form (carbide) in case of (A) Pig iron (B) Steel (C) Ferroalloys (D) All (A), (B) & (C)

Description : Carbon is present in the combined form (carbide) in case of (A) Pig iron (B) Steel (C) Ferroalloys (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Which one contains the least percentage of carbon?(A) Wrought iron (B) High speed steel (C) Cast iron (D) Pig iron

Description : Which one contains the least percentage of carbon? (A) Wrought iron (B) High speed steel (C) Cast iron (D) Pig iron

Last Answer : (A) Wrought iron

Which of the following has the least carbon percentage? (A) Low carbon steel (B) Mild steel (C) Wrought iron (D) White cast iron

Description : Which of the following has the least carbon percentage? (A) Low carbon steel (B) Mild steel (C) Wrought iron (D) White cast iron

Last Answer : (C) Wrought iron

Carbon percentage is the same in cast iron and (A) Wrought iron(B) Pig iron(C) Mild steel(D) High silicon (14%) iron

Description : Carbon percentage is the same in cast iron and (A) Wrought iron (B) Pig iron (C) Mild steel (D) High silicon (14%) iron

Last Answer : (B) Pig iron

Which one is remelted and poured into moulds to get cast iron? (A) Wrought iron (B) Pig iron (C) Low carbon steel (D) Mild steel

Description : Which one is remelted and poured into moulds to get cast iron? (A) Wrought iron (B) Pig iron (C) Low carbon steel (D) Mild steel

Last Answer : (B) Pig iron

Water gas generator is made of (A) Carbon steel-brick lined (B) Stainless steel-lead lined (C) Cast iron (D) High carbon steel-porcelain lined

Description : Water gas generator is made of (A) Carbon steel-brick lined (B) Stainless steel-lead lined (C) Cast iron (D) High carbon steel-porcelain lined

Last Answer : (A) Carbon steel-brick lined

In the Kraft (sulphate) process for the paper manufacture, the digestor is made of (A) Cast iron (B) Stainless steel (C) Karbate carbon (D) Wrought iron

Description : In the Kraft (sulphate) process for the paper manufacture, the digestor is made of (A) Cast iron (B) Stainless steel (C) Karbate carbon (D) Wrought iron

Last Answer : (B) Stainless steel

Which of the following has the highest compressive strength? (A) Wrought iron (B) Cast iron (C) Mild steel (D) High carbon steel

Description : Which of the following has the highest compressive strength? (A) Wrought iron (B) Cast iron (C) Mild steel (D) High carbon steel

Last Answer : (D) High carbon steel

Ball bearings are generally made of (A) Plain carbon steel (B) Chrome carbon steel (C) Stainless steel (D) Malleable cast iron

Description : Ball bearings are generally made of (A) Plain carbon steel (B) Chrome carbon steel (C) Stainless steel (D) Malleable cast iron

Last Answer : (B) Chrome carbon steel

Aqueous nitric acid is stored in __________ vessel. (A) Plain carbon steel (B) Stainless steel (C) Cast iron (D) Thermosetting plastic material

Description : Aqueous nitric acid is stored in __________ vessel. (A) Plain carbon steel (B) Stainless steel (C) Cast iron (D) Thermosetting plastic material

Last Answer : (C) Cast iron

Galvanising is generally done on (A) Non-ferrous metals (B) Low carbon steel (C) Stainless steel (D) Cast iron

Description : Galvanising is generally done on (A) Non-ferrous metals (B) Low carbon steel (C) Stainless steel (D) Cast iron

Last Answer : (B) Low carbon steel

Mixing vessel used for the chlorination of methane to produce methyl chloride is made of (A) Copper (B) Cast iron (C) Aluminium (D) High carbon steel

Description : Mixing vessel used for the chlorination of methane to produce methyl chloride is made of (A) Copper (B) Cast iron (C) Aluminium (D) High carbon steel

Last Answer : (B) Cast iron

Which of the following has the least value of ultimate tensile strength (UTS)? (A) Medium carbon steel (B) High carbon steel (C) Cast iron (D) Wrought iron Answer: Option C

Description : Which of the following has the least value of ultimate tensile strength (UTS)? (A) Medium carbon steel (B) High carbon steel (C) Cast iron (D) Wrought iron Answer: Option C

Last Answer : (C) Cast iron

Oxyacetylene reducing flame is used while carrying out welding on (A) Alloy steel (B) Grey cast iron (C) Mild steel (D) High carbon steel

Description : Oxyacetylene reducing flame is used while carrying out welding on (A) Alloy steel (B) Grey cast iron (C) Mild steel (D) High carbon steel

Last Answer : (C) Mild steel

Oxyacetylene reducing flame is used while carrying out welding on (A) Alloy steel (B) Grey cast iron (C) Mild steel (D) High carbon steel

Description : Oxyacetylene reducing flame is used while carrying out welding on (A) Alloy steel (B) Grey cast iron (C) Mild steel (D) High carbon steel

Last Answer : Option C

Which of the following has the least value of ultimate tensile strength (UTS)? (A) Medium carbon steel (B) High carbon steel (C) Cast iron (D) Wrought iron

Description : Which of the following has the least value of ultimate tensile strength (UTS)? (A) Medium carbon steel (B) High carbon steel (C) Cast iron (D) Wrought iron

Last Answer : Option B

Carbon is present in the form of __________ in grey cast iron. (A) Spheroids (B) Nodular aggregates of graphite (C) Flakes

Description : Carbon is present in the form of __________ in grey cast iron. (A) Spheroids (B) Nodular aggregates of graphite (C) Flakes

Last Answer : Option C

Which of the following is the purest form of iron? (A) Cast iron (B) Wrought iron (C) Mild steel (D) High carbon steel

Description : Which of the following is the purest form of iron? (A) Cast iron (B) Wrought iron (C) Mild steel (D) High carbon steel

Last Answer : Answer: Option B

The coefficient of static friction will have the highest value in case of a.Mild steel and mild steel b.Mild steel and copper c.Cast iron and steel d.Rope and wood e.Any of the above loctions

Description : The coefficient of static friction will have the highest value in case of a.Mild steel and mild steel b.Mild steel and copper c.Cast iron and steel d.Rope and wood e.Any of the above loctions

Last Answer : d. Rope and wood

Which one of the following contains maximum percentage of carbon? (1) Cast iron (2) Stainless steel (3) Wrought iron (4) High speed steel

Description : Which one of the following contains maximum percentage of carbon? (1) Cast iron (2) Stainless steel (3) Wrought iron (4) High speed steel

Last Answer : (1) Cast iron Explanation: Cast Iron is a hard, brittle, nonmalleable iron-carbon alloy, cast into shape, containing 2 to 4.5 percent carbon. Steels contain less than 2% and usually less than 1% carbon, ... percent carbon. Wrought iron is an iron alloy with very low carbon (0.04 to 0.08%) content.

The shovel of seed drill is made up of: A. Cast iron B. Mild steel C. White metal D. Carbon steel

Description : The shovel of seed drill is made up of: A. Cast iron B. Mild steel C. White metal D. Carbon steel

Last Answer : Carbon steel

The material used for making torsion bar is (a) Steel (b) Cast iron (c) High carbon steel (d) All of the above

Description : The material used for making torsion bar is (a) Steel (b) Cast iron (c) High carbon steel (d) All of the above

Last Answer : (a) Steel

Which material is suitable for shaft material? a. High speed steel b. Stainless steel or high carbon steel c. Grey cast iron d. Steel having approx. 0.4% carbon and 0.8% manganese

Description : Which material is suitable for shaft material? a. High speed steel b. Stainless steel or high carbon steel c. Grey cast iron d. Steel having approx. 0.4% carbon and 0.8% manganese

Last Answer : d. Steel having approx. 0.4% carbon and 0.8% manganese

Mould board are usually made from a. Soft centre steel b. Hardened carbon steel c. Chilled cast iron d. Mild steel

Description : Mould board are usually made from a. Soft centre steel b. Hardened carbon steel c. Chilled cast iron d. Mild steel

Last Answer : a. Soft centre steel

______is extensively used for those portions of magnetic circuit which carry steady flux and need superior mechanical properties ? (a) Grey cast-iron (b) Cast steel (c) High carbon steel (d) Stainless steel

Description : ______is extensively used for those portions of magnetic circuit which carry steady flux and need superior mechanical properties ? (a) Grey cast-iron (b) Cast steel (c) High carbon steel (d) Stainless steel

Last Answer : (b) Cast steel

Which one of the following contains maximum percentage of carbon ? (1) Cast iron (2) Stainless steel (3) Wrought iron (4) High speed steel

Description : Which one of the following contains maximum percentage of carbon ? (1) Cast iron (2) Stainless steel (3) Wrought iron (4) High speed steel

Last Answer : Cast iron

Supporting legs of a plate and frame filter is normally made of (A) Stainless steel (B) Cast iron (C) High speed steel (D) Wooden plank

Description : Supporting legs of a plate and frame filter is normally made of (A) Stainless steel (B) Cast iron (C) High speed steel (D) Wooden plank

Last Answer : (B) Cast iron

Balls for ball mills are never made of (A) Forged/cast steel (B) Lead (C) Cast iron (D) Alloy steel

Description : Balls for ball mills are never made of (A) Forged/cast steel (B) Lead (C) Cast iron (D) Alloy steel

Last Answer : (B) Lead

The fermenter used in the production of penicillin (by deep fermentation process) is made of (A) Glass (B) Glass lined steel (C) High silicon cast iron (D) Porcelain

Description : The fermenter used in the production of penicillin (by deep fermentation process) is made of (A) Glass (B) Glass lined steel (C) High silicon cast iron (D) Porcelain

Last Answer : (B) Glass lined steel

SO3 is absorbed using H2SO4 in a (A) Cast iron packed tower (B) Stainless steel plate tower (C) Packed steel tower lined with acid proof bricks (D) None of these

Description : SO3 is absorbed using H2SO4 in a (A) Cast iron packed tower (B) Stainless steel plate tower (C) Packed steel tower lined with acid proof bricks (D) None of these

Last Answer : (C) Packed steel tower lined with acid proof bricks

The carbonating tower used in Solvay process of soda ash manufactureis made of(A) Cast iron(B) Stainless steel(C) Karbate(D) Lead lined steel

Description : The carbonating tower used in Solvay process of soda ash manufactureis made of (A) Cast iron (B) Stainless steel (C) Karbate (D) Lead lined steel

Last Answer : (A) Cast iron

Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Last Answer : (D) Brass, cast iron, mild steel and tin

Plate and frame filter press is usually made of (A) Mild steel (B) Cast iron (C) Stainless steel (D) Galvanised iron

Description : Plate and frame filter press is usually made of (A) Mild steel (B) Cast iron (C) Stainless steel (D) Galvanised iron

Last Answer : (B) Cast iron

Acetylene gas holder is made of (A) Copper (B) Cast iron (C) Steel (D) Monel metal

Description : Acetylene gas holder is made of (A) Copper (B) Cast iron (C) Steel (D) Monel metal

Last Answer : (C) Steel

In the Contact process of sulphuric acid manufacture, 98% acid cooler is made of (A) Stainless steel (B) Cast iron (C) Lead lined steel (D) Rubber lined steel

Description : In the Contact process of sulphuric acid manufacture, 98% acid cooler is made of (A) Stainless steel (B) Cast iron (C) Lead lined steel (D) Rubber lined steel

Last Answer : (B) Cast iron

Sulphur melting pit in the sulphuric acid plant is made of (A) Lead lined stainless steel (B) Cast iron (C) Steel or cement-brick lined (D) Hard wood

Description : Sulphur melting pit in the sulphuric acid plant is made of (A) Lead lined stainless steel (B) Cast iron (C) Steel or cement-brick lined (D) Hard wood

Last Answer : (C) Steel or cement-brick lined

Acetaldehyde is produced by hydration of acetylene in a sulphuric acid solution of mercuric sulphate. Hydration tower is made of (A) Rubber lined mild steel (B) Lead lined mild steel (C) Aluminium (D) Cast iron

Description : Acetaldehyde is produced by hydration of acetylene in a sulphuric acid solution of mercuric sulphate. Hydration tower is made of (A) Rubber lined mild steel (B) Lead lined mild steel (C) Aluminium (D) Cast iron

Last Answer : (A) Rubber lined mild steel

Soap kettle used in the production of laundry soap is made of (A) Steel with top section nickel clad or stainless steel (B) Cast iron (C) Nickel (D) Concrete

Description : Soap kettle used in the production of laundry soap is made of (A) Steel with top section nickel clad or stainless steel (B) Cast iron (C) Nickel (D) Concrete

Last Answer : (A) Steel with top section nickel clad or stainless steel

Cast iron and steel pipes are produced by __________ casting. (A) Die (B) Investment (C) Slush(D) True centrifugal

Description : Cast iron and steel pipes are produced by __________ casting. (A) Die (B) Investment (C) Slush (D) True centrifugal

Last Answer : (D) True centrifugal

Urea autoclave is made of (A) Cast iron (B) Refractory blocks (C) Stainless steel (D) Lead lined steel

Description : Urea autoclave is made of (A) Cast iron (B) Refractory blocks (C) Stainless steel (D) Lead lined steel

Last Answer : (C) Stainless steel

Aqueous nitric acid is stored in (A) Steel drum (B) Stainless steel vessel (C) Cast iron vessel lined with acid-proof masonry brick (D) Cast iron vessel

Description : Aqueous nitric acid is stored in (A) Steel drum (B) Stainless steel vessel (C) Cast iron vessel lined with acid-proof masonry brick (D) Cast iron vessel

Last Answer : (B) Stainless steel vessel

Tank furnace used for melting of glass is made of (A) Mild steel (B) Cast iron (C) Refractory blocks (D) Stainless steel

Description : Tank furnace used for melting of glass is made of (A) Mild steel (B) Cast iron (C) Refractory blocks (D) Stainless steel

Last Answer : (C) Refractory blocks

Phenol is not shipped in (A) Nickel lined steel tank cars (B) Galvanised or tin lined drums (C) Boxed glass carboys (D) Cast iron containers

Description : Phenol is not shipped in (A) Nickel lined steel tank cars (B) Galvanised or tin lined drums (C) Boxed glass carboys (D) Cast iron containers

Last Answer : (D) Cast iron containers

The digester of a Gobar gas plant is a (A) Mild steel drum (B) Stainless steel vessel (C) Masonry well (D) Cast iron vessel

Description : The digester of a Gobar gas plant is a (A) Mild steel drum (B) Stainless steel vessel (C) Masonry well (D) Cast iron vessel

Last Answer : (C) Masonry well

Concentrated HCl at 30°C can be stored in a vessel made of (A) PTFE and porcelain (B) Cast iron and aluminium (C) Stainless steel and high silicon cast iron (D) None of these

Description : Concentrated HCl at 30°C can be stored in a vessel made of (A) PTFE and porcelain (B) Cast iron and aluminium (C) Stainless steel and high silicon cast iron (D) None of these

Last Answer : (A) PTFE and porcelain

H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Description : H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Last Answer : (A) Aluminium, mild steel, stainless steel, concrete & tin

Caustic soda can be stored in __________ drums. (A) Steel (B) Cast iron (C) Brass (D) Gun metal

Description : Caustic soda can be stored in __________ drums. (A) Steel (B) Cast iron (C) Brass (D) Gun metal

Last Answer : (A) Steel

The material of construction of pressure mills used for squeezing out the juice from sugar cane is (A) Stainless steel (B) Cast iron (C) Mild steel (D) Monel

Description : The material of construction of pressure mills used for squeezing out the juice from sugar cane is (A) Stainless steel (B) Cast iron (C) Mild steel (D) Monel

Last Answer : (B) Cast iron