Maximum carbon content in cast iron is __________ percent. (A) 3.8 (B) 5.2 (C) 4.8 (D) 4.3

Maximum carbon content in cast iron is __________ percent.
(A) 3.8
(B) 5.2
(C) 4.8
(D) 4.3
by

1 Answer

Answer :

(D) 4.3
by

Related questions

Cast iron contains __________ percent carbon. (A) 2.5 (B) 3.75 (C) 4.75 (D) 5.25

Description : Cast iron contains __________ percent carbon. (A) 2.5 (B) 3.75 (C) 4.75 (D) 5.25

Last Answer : Option A

Maximum change in the hardness of martensite occurs in the carbon content range of __________ percent in steel. (A) 0.01 to 0.10 (B) 0.2 to 0.4 (C) 0.5 to 0.7 (D) 0.8 to 1.0

Description : Maximum change in the hardness of martensite occurs in the carbon content range of __________ percent in steel. (A) 0.01 to 0.10 (B) 0.2 to 0.4 (C) 0.5 to 0.7 (D) 0.8 to 1.0

Last Answer : (B) 0.2 to 0.4

The minimum carbon content in steel should be __________ percent for it to respond to a hardening treatment. (A) 0.2 (B) 0.4 (C) 0.6 (D) 0.8

Description : The minimum carbon content in steel should be __________ percent for it to respond to a hardening treatment. (A) 0.2 (B) 0.4 (C) 0.6 (D) 0.8

Last Answer : Option A

Carbon content in the cast iron is (A) 2.5 – 4.5 % (B) 0 – 0.25 % (C) 0.25 – 0.50 % (D) 0.50 – 1.5 %

Description : Carbon content in the cast iron is (A) 2.5 – 4.5 % (B) 0 – 0.25 % (C) 0.25 – 0.50 % (D) 0.50 – 1.5 %

Last Answer : (B) 0 – 0.25 %

The impure iron (pig iron) that is tapped out from blast furnace contains about __________ percent carbon. (A) 0.2 (B) 2 (C) 4 (D) 8

Description : The impure iron (pig iron) that is tapped out from blast furnace contains about __________ percent carbon. (A) 0.2 (B) 2 (C) 4 (D) 8

Last Answer : (C) 4

Aqueous nitric acid is stored in __________ vessel. (A) Plain carbon steel (B) Stainless steel (C) Cast iron (D) Thermosetting plastic material

Description : Aqueous nitric acid is stored in __________ vessel. (A) Plain carbon steel (B) Stainless steel (C) Cast iron (D) Thermosetting plastic material

Last Answer : (C) Cast iron

Cupola produces __________ iron. (A) Pig (B) Cast (C) Wrought (D) Carbon free

Description : Cupola produces __________ iron. (A) Pig (B) Cast (C) Wrought (D) Carbon free

Last Answer : (B) Cast

Carbon is present in the form of __________ in grey cast iron. (A) Spheroids (B) Nodular aggregates of graphite (C) Flakes

Description : Carbon is present in the form of __________ in grey cast iron. (A) Spheroids (B) Nodular aggregates of graphite (C) Flakes

Last Answer : Option C

Steel will respond to hardening by heat treatment processes, only when the minimum carbon content in it is __________ percent. (A) 0.02 (B) 0.2 (C) 0.35 (D) 0.5

Description : Steel will respond to hardening by heat treatment processes, only when the minimum carbon content in it is __________ percent. (A) 0.02 (B) 0.2 (C) 0.35 (D) 0.5

Last Answer : (B) 0.2

Iron content in Indian iron ore is about __________ percent. (A) 80-85 (B) 60-65 (C) 40-45 (D) 20-25

Description : Iron content in Indian iron ore is about __________ percent. (A) 80-85 (B) 60-65 (C) 40-45 (D) 20-25

Last Answer : (B) 60-65

Carbon content in plain carbon steel is __________ percent. (A) 0.1 to 0.15 (B) 0.35 to 0.45 (C) 0.65 to 0.80 (D) 0.85 to 1.2

Description : Carbon content in plain carbon steel is __________ percent. (A) 0.1 to 0.15 (B) 0.35 to 0.45 (C) 0.65 to 0.80 (D) 0.85 to 1.2

Last Answer : (B) 0.35 to 0.45

Carbon content in steel is __________ percent. (A) 0.1-2 (B) 4-6 (C) 2-4 (D) 0.001-0.01

Description : Carbon content in steel is __________ percent. (A) 0.1-2 (B) 4-6 (C) 2-4 (D) 0.001-0.01

Last Answer : (A) 0.1-2

Carbon Content by weight in air dried wood may be about __________ percent. (A) 10 (B) 25 (C) 50 (D) 80

Description : Carbon Content by weight in air dried wood may be about __________ percent. (A) 10 (B) 25 (C) 50 (D) 80

Last Answer : (C) 50

Carbon content of pitch (residue of coal tar distillation) is around __________ percent. (A) 70 (B) 55(C) 80 (D) 94

Description : Carbon content of pitch (residue of coal tar distillation) is around __________ percent. (A) 70 (B) 55 (C) 80 (D) 94

Last Answer : (D) 94

__________ balls capable of grinding the feed in a ball mill gives the maximum efficiency. (A) Cast iron (B) Minimum size (C) Maximum size (D) Elliptical

Description : __________ balls capable of grinding the feed in a ball mill gives the maximum efficiency. (A) Cast iron (B) Minimum size (C) Maximum size (D) Elliptical

Last Answer : (B) Minimum size

Which one of the following contains maximum percentage of carbon? (1) Cast iron (2) Stainless steel (3) Wrought iron (4) High speed steel

Description : Which one of the following contains maximum percentage of carbon? (1) Cast iron (2) Stainless steel (3) Wrought iron (4) High speed steel

Last Answer : (1) Cast iron Explanation: Cast Iron is a hard, brittle, nonmalleable iron-carbon alloy, cast into shape, containing 2 to 4.5 percent carbon. Steels contain less than 2% and usually less than 1% carbon, ... percent carbon. Wrought iron is an iron alloy with very low carbon (0.04 to 0.08%) content.

Which one of the following contains maximum percentage of carbon ? (1) Cast iron (2) Stainless steel (3) Wrought iron (4) High speed steel

Description : Which one of the following contains maximum percentage of carbon ? (1) Cast iron (2) Stainless steel (3) Wrought iron (4) High speed steel

Last Answer : Cast iron

Maximum permissible sulphur content in steel is __________ percent. (A) 0.015 (B) 0.055 (C) 0.505 (D) 0.805

Description : Maximum permissible sulphur content in steel is __________ percent. (A) 0.015 (B) 0.055 (C) 0.505 (D) 0.805

Last Answer : (B) 0.055

Maximum permissible sulphur content in steel is __________ percent. (A) 0.015 (B) 0.055 (C) 0.505

Description : Maximum permissible sulphur content in steel is __________ percent. (A) 0.015 (B) 0.055 (C) 0.505

Last Answer : Option A

Maximum permissible sulphur content in steel is __________ percent. (A) 0.015 (B) 0.055 (C) 0.505 (D) 0.805

Description : Maximum permissible sulphur content in steel is __________ percent. (A) 0.015 (B) 0.055 (C) 0.505 (D) 0.805

Last Answer : Option A

Cast irons are generally specified by their (A) Carbon content (B) Tensile strength (C) Hardness (D) Manufacturing process

Description : Cast irons are generally specified by their (A) Carbon content (B) Tensile strength (C) Hardness (D) Manufacturing process

Last Answer : (B) Tensile strength

The optimum moisture content in solids to be crushed/ground ranges from __________ percent. (A) 3 to 4 (B) 8 to 10 (C) 10 to 15 (D) 15 to 20

Description : The optimum moisture content in solids to be crushed/ground ranges from __________ percent. (A) 3 to 4 (B) 8 to 10 (C) 10 to 15 (D) 15 to 20

Last Answer : (A) 3 to 4

Which one contains the least percentage of carbon?(A) Wrought iron (B) High speed steel (C) Cast iron (D) Pig iron

Description : Which one contains the least percentage of carbon? (A) Wrought iron (B) High speed steel (C) Cast iron (D) Pig iron

Last Answer : (A) Wrought iron

Which of the following has the least carbon percentage? (A) Low carbon steel (B) Mild steel (C) Wrought iron (D) White cast iron

Description : Which of the following has the least carbon percentage? (A) Low carbon steel (B) Mild steel (C) Wrought iron (D) White cast iron

Last Answer : (C) Wrought iron

Carbon percentage is the same in cast iron and (A) Wrought iron(B) Pig iron(C) Mild steel(D) High silicon (14%) iron

Description : Carbon percentage is the same in cast iron and (A) Wrought iron (B) Pig iron (C) Mild steel (D) High silicon (14%) iron

Last Answer : (B) Pig iron

Which one is remelted and poured into moulds to get cast iron? (A) Wrought iron (B) Pig iron (C) Low carbon steel (D) Mild steel

Description : Which one is remelted and poured into moulds to get cast iron? (A) Wrought iron (B) Pig iron (C) Low carbon steel (D) Mild steel

Last Answer : (B) Pig iron

Water gas generator is made of (A) Carbon steel-brick lined (B) Stainless steel-lead lined (C) Cast iron (D) High carbon steel-porcelain lined

Description : Water gas generator is made of (A) Carbon steel-brick lined (B) Stainless steel-lead lined (C) Cast iron (D) High carbon steel-porcelain lined

Last Answer : (A) Carbon steel-brick lined

In the Kraft (sulphate) process for the paper manufacture, the digestor is made of (A) Cast iron (B) Stainless steel (C) Karbate carbon (D) Wrought iron

Description : In the Kraft (sulphate) process for the paper manufacture, the digestor is made of (A) Cast iron (B) Stainless steel (C) Karbate carbon (D) Wrought iron

Last Answer : (B) Stainless steel

Which of the following has the highest compressive strength? (A) Wrought iron (B) Cast iron (C) Mild steel (D) High carbon steel

Description : Which of the following has the highest compressive strength? (A) Wrought iron (B) Cast iron (C) Mild steel (D) High carbon steel

Last Answer : (D) High carbon steel

Ball bearings are generally made of (A) Plain carbon steel (B) Chrome carbon steel (C) Stainless steel (D) Malleable cast iron

Description : Ball bearings are generally made of (A) Plain carbon steel (B) Chrome carbon steel (C) Stainless steel (D) Malleable cast iron

Last Answer : (B) Chrome carbon steel

Carbon is present in the uncombined (graphitic) form in case of (A) Cast iron (B) Steel (C) Ferroalloy (D) None of these

Description : Carbon is present in the uncombined (graphitic) form in case of (A) Cast iron (B) Steel (C) Ferroalloy (D) None of these

Last Answer : (A) Cast iron

Galvanising is generally done on (A) Non-ferrous metals (B) Low carbon steel (C) Stainless steel (D) Cast iron

Description : Galvanising is generally done on (A) Non-ferrous metals (B) Low carbon steel (C) Stainless steel (D) Cast iron

Last Answer : (B) Low carbon steel

Mixing vessel used for the chlorination of methane to produce methyl chloride is made of (A) Copper (B) Cast iron (C) Aluminium (D) High carbon steel

Description : Mixing vessel used for the chlorination of methane to produce methyl chloride is made of (A) Copper (B) Cast iron (C) Aluminium (D) High carbon steel

Last Answer : (B) Cast iron

Which of the following has the least value of ultimate tensile strength (UTS)? (A) Medium carbon steel (B) High carbon steel (C) Cast iron (D) Wrought iron Answer: Option C

Description : Which of the following has the least value of ultimate tensile strength (UTS)? (A) Medium carbon steel (B) High carbon steel (C) Cast iron (D) Wrought iron Answer: Option C

Last Answer : (C) Cast iron

Pick out the wrong statement. (A) Wrought iron contains about 0.02% carbon (B) Wrought iron cannot be easily forged and welded (C) The chilled cast iron does not contain graphite (D) Spheroidal grey cast iron contains graphite flakes

Description : Pick out the wrong statement. (A) Wrought iron contains about 0.02% carbon (B) Wrought iron cannot be easily forged and welded (C) The chilled cast iron does not contain graphite (D) Spheroidal grey cast iron contains graphite flakes

Last Answer : (B) Wrought iron cannot be easily forged and welded

Oxyacetylene reducing flame is used while carrying out welding on (A) Alloy steel (B) Grey cast iron (C) Mild steel (D) High carbon steel

Description : Oxyacetylene reducing flame is used while carrying out welding on (A) Alloy steel (B) Grey cast iron (C) Mild steel (D) High carbon steel

Last Answer : (C) Mild steel

Oxyacetylene reducing flame is used while carrying out welding on (A) Alloy steel (B) Grey cast iron (C) Mild steel (D) High carbon steel

Description : Oxyacetylene reducing flame is used while carrying out welding on (A) Alloy steel (B) Grey cast iron (C) Mild steel (D) High carbon steel

Last Answer : Option C

Which of the following has the least value of ultimate tensile strength (UTS)? (A) Medium carbon steel (B) High carbon steel (C) Cast iron (D) Wrought iron

Description : Which of the following has the least value of ultimate tensile strength (UTS)? (A) Medium carbon steel (B) High carbon steel (C) Cast iron (D) Wrought iron

Last Answer : Option B

Annealing of cast iron (A) Softens it to facilitate machining (B) Decreases the free carbon (C) Increases the strength (D) None of these

Description : Annealing of cast iron (A) Softens it to facilitate machining (B) Decreases the free carbon (C) Increases the strength (D) None of these

Last Answer : Option A

High carbon steel contains more than __________ percent carbon. (A) 0.5 (B) 2.2 (C) 2.5 (D) 2.8

Description : High carbon steel contains more than __________ percent carbon. (A) 0.5 (B) 2.2 (C) 2.5 (D) 2.8

Last Answer : (A) 0.5

Which has the maximum melting point out of the following? (A) Steel (B) Cast iron (C) Stainless steel (D) Wrought iron

Description : Which has the maximum melting point out of the following? (A) Steel (B) Cast iron (C) Stainless steel (D) Wrought iron

Last Answer : (D) Wrought iron

Which one has the maximum tensile strength out of the following? (A) Nodular cast iron (B) Pig iron (C) White cast iron (D) Grey cast iron

Description : Which one has the maximum tensile strength out of the following? (A) Nodular cast iron (B) Pig iron (C) White cast iron (D) Grey cast iron

Last Answer : (A) Nodular cast iron

Which of the following materials has the maximum shrinkage allowance? (A) Brass (B) Cast iron (C) Lead (D) Aluminium alloy

Description : Which of the following materials has the maximum shrinkage allowance? (A) Brass (B) Cast iron (C) Lead (D) Aluminium alloy

Last Answer : Option C

Cast iron and steel pipes are produced by __________ casting. (A) Die (B) Investment (C) Slush(D) True centrifugal

Description : Cast iron and steel pipes are produced by __________ casting. (A) Die (B) Investment (C) Slush (D) True centrifugal

Last Answer : (D) True centrifugal

Caustic soda can be stored in __________ drums. (A) Steel (B) Cast iron (C) Brass (D) Gun metal

Description : Caustic soda can be stored in __________ drums. (A) Steel (B) Cast iron (C) Brass (D) Gun metal

Last Answer : (A) Steel

Acetaldehyde is shipped in __________ drums. (A) Cast iron (B) Steel (C) Aluminium (D) Either (B) & (C)

Description : Acetaldehyde is shipped in __________ drums. (A) Cast iron (B) Steel (C) Aluminium (D) Either (B) & (C)

Last Answer : (D) Either (B) & (C)

__________ iron is produced, when molten pig iron is chilled suddenly. (A) White cast (B) Grey cast (C) Wrought (D) None of these

Description : __________ iron is produced, when molten pig iron is chilled suddenly. (A) White cast (B) Grey cast (C) Wrought (D) None of these

Last Answer : (A) White cast

Cast iron is a __________ material. (A) Brittle (B) Ductile (C) Tough (D) Malleable

Description : Cast iron is a __________ material. (A) Brittle (B) Ductile (C) Tough (D) Malleable

Last Answer : (A) Brittle

Cast iron detachable joint is used in __________ pipes. (A) Steel (B) Cast iron (C) Asbestos cement (D) Reinforced cement concrete

Description : Cast iron detachable joint is used in __________ pipes. (A) Steel (B) Cast iron (C) Asbestos cement (D) Reinforced cement concrete

Last Answer : (A) Steel

__________ iron is produced, when molten pig iron is allowed to cool gradually. (A) White cast (B) Grey cast (C) Wrought (D) None of these

Description : __________ iron is produced, when molten pig iron is allowed to cool gradually. (A) White cast (B) Grey cast (C) Wrought (D) None of these

Last Answer : (B) Grey cast