Description : The aggregates of __________________-shape have maximum voids (a) Irregular (b) Angular (c)Rounded (d) Flaky
Last Answer : (b) Angular
Description : The aggregates of __________________-shape have manimum voids (a) Irregular (b) Angular (c)Rounded (d) Flaky
Last Answer : (c)Rounded
Description : The type of aggregates not suitable for high strength concrete and for pavements subjected to tension, is (A) Rounded aggregate (B) Irregular aggregate (C) Angular aggregate (D) Flaky aggregat
Last Answer : Answer: Option A
Description : Pick up the correct statement from the following: (A) According to the petrological characteristics, concrete aggregates are classified as heavy weight, normal weight and light weight (B) According to ... glassy, smooth, granular, rough, crystalline, honey combed and porous (D) All the above
Last Answer : Answer: Option D
Description : Workability of concrete for a given water content is good if the aggregates, are (A) Rounded aggregate (B) Irregular aggregate (C) Angular aggregate (D) Flaky aggregate
Description : Workability of concrete for a given water content is good, if the aggregates are [ A ] Rounded [ B ] Irregular [ C ] Angular [ D ] Flaky
Last Answer : [ A ] Rounded
Description : If aggregates completely pass through a sieve of size 75 mm and are retained on a sieve of size 60 mm, the particular aggregate will be flaky if its minimum dimension is less than (A) 20.5 mm (B) 30.5 mm (C) 40.5 mm (D) 50.5 mm
Last Answer : Answer: Option C
Description : In the penetration macadam construction, the bitumen is (A) Sprayed after the aggregates are spread and compacted (B) Premixed with aggregates and then spread (C) Sprayed before the aggregates are spread and compacted (D) None of the above
Description : An excess of flaky particles in concrete aggregates (A) Decreases the workability (B) Increases the quantity of water and sand (C) More than 15% are not desirable (D) All the above
Description : Pick up the correct statement from the following: (A) The theory of formation of concrete is based on the phenomena of formation of voids (B) The bulking of sand is taken into account while ... sand and the sand completely flooded with water, have practically the same volume (D) All the above
Description : For the improvement of work ability of concrete , the shape of aggregate recommended is (a) Irregular (b) Angular (c) Round (d) Flaky
Last Answer : (c) Round
Description : The maximum dry density to which a soil may be compacted to depends upon a) Soil water content * b) The process of compaction c) The voids ratio d) Is independent of the type of soil
Last Answer : a) Soil water content *
Description : For reinforced concrete work, aggregates having a nominal size of -------- are generally used [ A ] 20 mm [ B ] 40 mm [ C ] 50 mm [ D ] 60 mm
Last Answer : [ A ] 20 mm
Description : Powdery materials can be guarded against caking tendency on storage by (A) Providing irregular grain size (B) Providing minimum percentage of voids (C) Having maximum possible points of contact (D) None of these
Last Answer : (D) None of these
Description : Pick up the correct statement from the following: (A) The ratio of total volume of voids in soil aggregates to the total volume of aggregate, is called Porosity (B) Water retained by the interstices ... (C) Sum of the percentage of specific yield and specific retention is 100 (D) All the above
Description : In the method of voids for determination of the quantity of cement paste, it is assumed that (A) Voids in coarse aggregates are filled by fine aggregates (B) Voids in fine aggregates are filled by ... of fine aggregates is equal to total voids in coarse aggregates plus 10% extra (D) All the above
Description : Pick up the correct statement from the following: (A) The earth work of cutting in trenches or borrow pits in fairly uniform ground is measured with the help of average depths of the dead men (B) ... a nor b is feasible, are measured from the fillings after deduction of voids (D) All the above
Last Answer : (D) All the above
Description : A flaky aggregate is said to be elongated if its length is (A) Equal to the mean size (B) Twice the mean size (C) Thrice the mean size (D) Four times the mean size
Last Answer : Answer: Option B
Description : An aggregate is said to be flaky, if its least dimension is less than (A) 2/3 mean dimension (B) 3/4 mean dimension (C) 3/5 mean dimension (D) 5/8 mean dimension
Last Answer : (C) 3/5 mean dimension
Description : An aggregate which passes through 25 mm I.S. sieve and is retained on 20 mm sieve, is said to be flaky if its least dimension is less than (A) 22.5 mm (B) 18.5 mm (C) 16.5 mm (D) 13.5 mm
Description : An aggregate is said to be flaky if its least dimension is less than (A) 1/5th of mean dimension (B) 2/5th of mean dimension (C) 3/5th of mean dimension (D) 4/5th of mean dimension
Description : An aggregate is said to be flaky, if its least dimension is less than [ A ] 2/3 mean dimension [ B ] 3/4 mean dimension [ C ] 3/5 mean dimension [ D ] 5/8 mean dimension
Last Answer : [ C ] 3/5 mean dimension
Description : Honey contain glucose and fructose along with some other ingredients, it has greater viscosity due to------? A. hydrogen bonding B. irregular shape of the molecules C. irregular shape of the molecules and strong inter-molecular forces (Answer) D. greater molecular size
Last Answer : C. irregular shape of the molecules and strong inter-molecular forces (Answer)
Description : For given water content, workability decreases if the concrete aggregates contain an excess of (A) Thin particles (B) Flat particles (C) Elongated particles (D) All the above
Description : If a grading curve is horizontal between the portions of 20 mm I.S. Sieve and 4.75 mm I.S. Sieve, the graded aggregates do not contain (A) 20 mm particles (B) 10 mm particles (C) 4.75 mm particles (D) All the above
Description : For preparation of porous bearings by powder metallurgy, preferred particle shape is (A) Spherical (B) Nodular (C) Irregular (D) No preferred shape
Last Answer : (A) Spherical
Description : Infiltration capacity of soil depends upon (A) Number of voids present in the soil (B) Shape and size of soil particles (C) Arrangement of soil particles (D) All the above
Description : Pick up the correct statement from the following: (A) Continuous grading is not necessary for obtaining a minimum of air voids (B) The omission of a certain size of aggregate is shown by ... in concrete increases the workability but also increases the liability to segregation (D) All the above
Description : Following type of pavement is generally known as flexible pavement (A) Water-bound macadam roads (B) Stabilised soil roads (C) Road constructed with various layers of building material well compacted (D) All the above
Description : the water content of a fully saturated soil mass is 100%, then the voids ratio of the sample is (A) Less than specific gravity of soil (B) Equal to specific gravity of soil (C) Greater than specific gravity of soil (D) Independent of specific gravity of soil
Description : Select the correct statement. (A) Quantity of binder required for tack coat is less than that required for prime coat (B) Prime coat treatment is given for plugging the voids in water ... the final coat over certain previous bituminous pavements (D) A bitumen primer is a high viscosity cutback
Description : The external load per unit length of (A) A pipe laid on, or projecting above the undisturbed ground and covered with fills, is proportional to the square of the external diameter of the pipe ... fills, is proportional to the square of the width of the trench (D) All the above
Description : A compacted soil sample using 10% moisture content has a weight of 200 g and mass unit weight of 2.0 g/cm3 . If the specific gravity of soil particles and water are 2.7 and 1.0, the degree of saturation of the soil is (A) 11.1 % (B) 55.6 % (C) 69.6 % (D) None of these
Last Answer : (B) 55.6 %
Description : Coarse grained soils are best compacted by a (A) Drum roller (B) Rubber tyred roller (C) Sheep's foot roller (D) Vibratory roller
Last Answer : (D) Vibratory roller
Description : Relative density of a compacted dense sand is approximately equal to (A) 0.4 (B) 0.6 (C) 0.95 (D) 1.20
Last Answer : (C) 0.95
Description : Pick up the incorrect statement from the following: (A) Compaction has no effect on the structure of a soil (B) Permeability decreases with increase in the dry density of a compacted soil (C) ... a dry side compacted soil (D) Dry side compaction soils swell more when given access to moisture
Last Answer : (A) Compaction has no effect on the structure of a soil
Description : The maximum dry density upto which any soil can be compacted depends upon (A) Moisture content only (B) Amount of compaction energy only (C) Both moisture content and amount of compaction energy (D) None of the above
Last Answer : (C) Both moisture content and amount of compaction energy
Description : The internal molecular attraction of a soil, the cohesion (A) Decreases as the moisture content increases (B) Increases as the moisture content decreases (C) Is more in well compacted clays (D) Depends upon the external applied load
Description : Pick up the cohesive soil from the following: (A) Red earth (B) Clay (C) Black cotton soil (D) Compacted ground
Description : For better strength and stability, the fine grained soils and coarse grained soils are compacted respectively as (A) Dry of OMC and wet of OMC (B) Wet of OMC and dry of OMC (C) Wet of OMC and wet of OMC (D) Dry of OMC and dry of OMC where OMC is optimum moisture content
Description : Pick up the correct statement from the following: (A) The dry density reduces by addition of water after attaining optimum moisture content (B) The line joining the peak of three moisture content graphs ... be compacted to a very high density as compared to fine grained soils (D) All the above
Description : Wp and Wf are the weights of a cylinder containing partially compacted and fully compacted concrete. If the compaction factor (Wp/Wf ) is 0.95, the workability of concrete is (A) Extremely low (B) Very low (C) Low (D) High
Last Answer : Option D
Description : In slump test, each layer of concrete is compacted by a steel rod 60 cm long and of 16 mm diameter for (A) 20 times (B) 25 times (C) 30 times (D) 50 time
Description : Pick up the correct statement from the following: (A) The sand in the sand pile is well compacted (B) The sand is kept moist at the time of placing and tamping (C) Sand piles are generally used under column loads (D) All of the above
Description : Which of the following correspond to the recommendations of IRC for pavement thickness determination by CBR Method ? 1. CBR tests are to be conducted in-situ 2. Static compression is best adopted 3. The top 50 cm of sub grade ... 1, 2 and 3 (b) 1 and 2 only (c) 2 and 3 only (d) 1 and 3 only
Last Answer : (c) 2 and 3 only
Description : The maximum permissible size of aggregates to be used in casting the ribs of a slab, is (A) 5 mm (B) 7.5 mm (C) 10 mm (D) 15 mm
Description : The factor which affects workability, is (A) Water content and its temperature (B) Shape and size of the aggregates (C) Air entraining agents (D) All the above
Description : The bulk density of aggregates does not depend upon: (A) Size and shape of aggregates (B) Specific gravity of aggregates (C) Grading of aggregates (D) Size and shape of the container
Description : Pick up the incorrect statement from the following: (A) In properly graded aggregates, bulk density is more (B) In single size aggregates, bulk density is least (C) In single size aggregates, bulk density is maximum (D) None of these
Description : The size of fine aggregates does not exceed (A) 2.75 mm (B) 3.00 mm (C) 3.75 mm (D) 4.75 mm