The aggregates of __________________-shape have manimum voids
(a) Irregular
(b) Angular
(c)Rounded
(d) Flaky

1 Answer

Answer :

(c)Rounded

Related questions

Description : The aggregates of __________________-shape have maximum voids (a) Irregular (b) Angular (c)Rounded (d) Flaky

Last Answer : (b) Angular

Description : Pick up the correct statement from the following: (A) According to the petrological characteristics, concrete aggregates are classified as heavy weight, normal weight and light weight (B) According to ... glassy, smooth, granular, rough, crystalline, honey combed and porous (D) All the above

Last Answer : Answer: Option D

Description : The type of aggregates of same nominal size, which contain less voids when compacted, are (A) Rounded spherical (B) Irregular (C) Flaky (D) None of these

Last Answer : Answer: Option A

Description : The type of aggregates not suitable for high strength concrete and for pavements subjected to tension, is (A) Rounded aggregate (B) Irregular aggregate (C) Angular aggregate (D) Flaky aggregat

Last Answer : Answer: Option A

Description : Workability of concrete for a given water content is good if the aggregates, are (A) Rounded aggregate (B) Irregular aggregate (C) Angular aggregate (D) Flaky aggregate

Last Answer : Answer: Option A

Description : Workability of concrete for a given water content is good, if the aggregates are [ A ] Rounded [ B ] Irregular [ C ] Angular [ D ] Flaky

Last Answer : [ A ] Rounded

Description : For the improvement of work ability of concrete , the shape of aggregate recommended is (a) Irregular (b) Angular (c) Round (d) Flaky

Last Answer : (c) Round

Description : If aggregates completely pass through a sieve of size 75 mm and are retained on a sieve of size 60 mm, the particular aggregate will be flaky if its minimum dimension is less than (A) 20.5 mm (B) 30.5 mm (C) 40.5 mm (D) 50.5 mm

Last Answer : Answer: Option C

Description : An excess of flaky particles in concrete aggregates (A) Decreases the workability (B) Increases the quantity of water and sand (C) More than 15% are not desirable (D) All the above

Last Answer : Answer: Option D

Description : Pick up the correct statement from the following: (A) The ratio of total volume of voids in soil aggregates to the total volume of aggregate, is called Porosity (B) Water retained by the interstices ... (C) Sum of the percentage of specific yield and specific retention is 100 (D) All the above

Last Answer : Answer: Option D

Description : In the method of voids for determination of the quantity of cement paste, it is assumed that (A) Voids in coarse aggregates are filled by fine aggregates (B) Voids in fine aggregates are filled by ... of fine aggregates is equal to total voids in coarse aggregates plus 10% extra (D) All the above

Last Answer : Answer: Option D

Description : Pick up the correct statement from the following: (A) The theory of formation of concrete is based on the phenomena of formation of voids (B) The bulking of sand is taken into account while ... sand and the sand completely flooded with water, have practically the same volume (D) All the above

Last Answer : Answer: Option D

Description : Pick up the correct statement from the following: (A) The earth work of cutting in trenches or borrow pits in fairly uniform ground is measured with the help of average depths of the dead men (B) ... a nor b is feasible, are measured from the fillings after deduction of voids (D) All the above

Last Answer : (D) All the above

Description : In order to obtain the best workability of concrete, the preferred shape of aggregate is (A) Rounded (B) Elongated (C) Angular (D) All of the above

Last Answer : Answer: Option A

Description : The coarse aggregate which possess the property of good interlocking are [ A ] rounded shape [ B ] elongated shape [ C ] angular shape [ D ] none of the above

Last Answer : [ C ] angular shape

Description : Powdery materials can be guarded against caking tendency on storage by (A) Providing irregular grain size (B) Providing minimum percentage of voids (C) Having maximum possible points of contact (D) None of these

Last Answer : (D) None of these

Description : Pick up the correct statement from the following: (A) An increase in water content must be accompanied by an increase in cement content (B) Angular and rough aggregates reduce the workability of the ... The slump of the concrete mix decreases due to an increase in temperature (D) All the above

Last Answer : Answer: Option D

Description : Infiltration capacity of soil depends upon (A) Number of voids present in the soil (B) Shape and size of soil particles (C) Arrangement of soil particles (D) All the above

Last Answer : Answer: Option D

Description : Which of the following tests measures the toughness of road aggregates? (A) Crushing strength test (B) Abrasion test (C) Impact test (D) Shape test

Last Answer : Answer: Option C

Description : The factor which affects workability, is (A) Water content and its temperature (B) Shape and size of the aggregates (C) Air entraining agents (D) All the above

Last Answer : (D) All the above

Description : The bulk density of aggregates does not depend upon: (A) Size and shape of aggregates (B) Specific gravity of aggregates (C) Grading of aggregates (D) Size and shape of the container

Last Answer : Answer: Option D

Description : The strength and quality of concrete, depend upon: (A) Grading of aggregates (B) Surface area of aggregates (C) Shape of aggregates (D) All the above

Last Answer : Answer: Option D

Description : The bulk density of aggregates, depends upon (A) Shape (B) Grading (C) Compaction (D) All the above

Last Answer : Answer: Option D

Description : The strength and quality of concrete depends upon (i)Grading of aggregates (ii)Shape of aggregates (iii)Surface area of aggregates (iv)Surface texture of aggregates [ A ] i, ii and iv [ B ] ii, iii and iv [ C ] i, iii and iv [ D ] i, ii, iii and iv

Last Answer : [ D ] i, ii, iii and iv

Description : An aggregate is said to be flaky, if its least dimension is less than (A) 2/3 mean dimension (B) 3/4 mean dimension (C) 3/5 mean dimension (D) 5/8 mean dimension

Last Answer : (C) 3/5 mean dimension

Description : An aggregate which passes through 25 mm I.S. sieve and is retained on 20 mm sieve, is said to be flaky if its least dimension is less than (A) 22.5 mm (B) 18.5 mm (C) 16.5 mm (D) 13.5 mm

Last Answer : Answer: Option D

Description : An aggregate is said to be flaky if its least dimension is less than (A) 1/5th of mean dimension (B) 2/5th of mean dimension (C) 3/5th of mean dimension (D) 4/5th of mean dimension

Last Answer : Answer: Option C

Description : A flaky aggregate is said to be elongated if its length is (A) Equal to the mean size (B) Twice the mean size (C) Thrice the mean size (D) Four times the mean size

Last Answer : Answer: Option B

Description : An aggregate is said to be flaky, if its least dimension is less than [ A ] 2/3 mean dimension [ B ] 3/4 mean dimension [ C ] 3/5 mean dimension [ D ] 5/8 mean dimension

Last Answer : [ C ] 3/5 mean dimension

Description : Tilth is related to a. Soil aggregates shape b. Soil aggregates size distribution c. Soil aggregates arrangement d. All of these

Last Answer : d. All of these

Description : What are the shape simplification methods for simplifying the irregular shape geometry as regular geometry?

Last Answer : Not sure if this is at all helpful to you, but from a 3d modelling standpoint, you could subdivide the shape into rectangles and triangles.

Description : Assertion A flexeble wire loop of irregular shape carrying current when placed in a uniform external magnetic field acquires a circular shape. Reason

Last Answer : Assertion A flexeble wire loop of irregular shape carrying current when placed in a uniform external ... circular shape is having the greatert area.

Description : Is hexagon a irregular shape?

Last Answer : A 6 sided hexagon can be a regular or an irregular shapedpolygon

Description : Translucent spots of irregular shape between veins shows

Last Answer : Ans. Mo deficiency

Description : __________ conveyor is the most suitable for long distance transportation of cold, non-abrasive granular/irregular shape/fine materials. (A) Bucket (B) Belt (C) Screw (D) Apron

Last Answer : (B) Belt

Description : Honey contain glucose and fructose along with some other ingredients, it has greater viscosity due to------? A. hydrogen bonding B. irregular shape of the molecules C. irregular shape of the molecules and strong inter-molecular forces (Answer) D. greater molecular size

Last Answer : C. irregular shape of the molecules and strong inter-molecular forces (Answer)

Description : The soil in which the pores are interconnected and irregular in size and shape is? A. Tubular B. Vesicular C. Spongy D. Cellular

Last Answer : C. Spongy

Description : For preparation of porous bearings by powder metallurgy, preferred particle shape is (A) Spherical (B) Nodular (C) Irregular (D) No preferred shape

Last Answer : (A) Spherical

Description : What causes the young leaves of my plants to become pointed and irregular in shape? I noticed the twisting of the leaves and stems after spraying the plants for the first time.

Last Answer : A. Your tomato plants have been injured by 2,4-D or a similar weed killer. Never use the same sprayer for weed control in your vegetable garden you used on your lawn. Drift from herbicides ... can also injure tomato plants. A virus disease called cucumber mosaic virus (CMV) can mimic these symptoms.

Description : Hepatic cells of rabbit are in the form of (a) Rounded hepatocytes (b) Irregular hepatocytes (c) Discoidal hepatocytes (d) Polyhedral radiating hepatocytes

Last Answer : (d) Polyhedral radiating hepatocytes

Description : Voids ratio of a soil mass can (A) Never be greater than unity (B) Be zero (C) Take any value greater than zero (D) Take values between 0 and 1 only

Last Answer : (C) Take any value greater than zero

Description : The critical exist gradient of seepage water in soils, is (A) Directly proportional to the voids ratio (B) Inversely proportional to the specific gravity (C) Directly proportional to the specific gravity (D) None of these

Last Answer : (D) None of these

Description : Valid range for n, the percentage voids, is (A) 0 < n < 100 (B) 0 < n < 100 (C) n > 0 (D) n < 0

Last Answer : (A) 0 < n < 100

Description : The hydraulic head that would produce a quick condition in a sand stratum of thickness 1.5 m, specific gravity 2.67 and voids ratio 0.67 is equal to (A) 1.0 m (B) 1.5 m (C) 2.0 m (D) 3 m

Last Answer : (B) 1.5 m

Description : The ultimate consolidation settlement of a soil is (A) Directly proportional to the voids ratio (B) Directly proportional to the compression index (C) Inversely proportional to the compression index (D) None of the above

Last Answer : (B) Directly proportional to the compression index

Description : A coarse-grained soil has a voids ratio 0.75, and specific gravity as 2.75. The critical gradient at which quick sand condition occurs, is (A) 0.25 (B) 0.50 (C) 0.75 (D) 1.00

Last Answer : (D) 1.00

Description : The ratio of the volume of voids to the volume of soil solids in a given soil mass, is known (A) Porosity (B) Specific gravity (C) Void ratio (D) Water content

Last Answer : (C) Void ratio

Description : The ratio of volume of voids to the total volume of soil mass is called (A) Air content (B) Porosity (C) Percentage air voids (D) Voids ratio

Last Answer : (B) Porosity

Description : Pick up the correct statement from the following: (A) O.M.C. refers to the moisture corresponding to the maximum point on the moisture content dry density curve (B) The line which shows moisture content dry ... void line (C) The free fall of hammer for compaction is 30.5 cm (D) All the above

Last Answer : (D) All the above

Description : A pycnometer is used to determine (A) Water content and voids ratio (B) Specific gravity and dry density (C) Water content and specific gravity (D) Voids ratio and dry density

Last Answer : (C) Water content and specific gravity