Sensitivity of a soil can be defined as (A) Percentage of volume change of soil under saturated condition (B) Ratio of compressive strength of unconfined undisturbed soil to that of soil in a remoulded state (C) Ratio of volume of voids to volume of solids (D) None of the above

Sensitivity of a soil can be defined as
(A) Percentage of volume change of soil under saturated condition
(B) Ratio of compressive strength of unconfined undisturbed soil to that of soil in a remoulded
state
(C) Ratio of volume of voids to volume of solids
(D) None of the above
by

1 Answer

Answer :

Answer: Option B
by

Related questions

Pick up the incorrect definition from the following: (A) Ratio of the compressive strength of unconfined undisturbed soil to that of remoulded soil, is known as the sensitivity of the soil sample (B) The rotation of soil particles into stable state while remoulding, is known as the thiostropy of soil (C) The water content at which a soil flows, is known plastic limit of the soil (D) None of these

Description : Pick up the incorrect definition from the following: (A) Ratio of the compressive strength of unconfined undisturbed soil to that of remoulded soil, is known as the sensitivity of the soil sample (B) The ... content at which a soil flows, is known plastic limit of the soil (D) None of these

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The property of a soil that enables it to become stiff in a relatively short time on standing is called thixotropy (B) The ratio of shear strength in natural state to the remoulded shear strength under undrained conditions is called degree of sensitivity (C) The difference between the undisturbed shear strength and remoulded shear strength is known remoulding loss (D) All the above

Description : Pick up the correct statement from the following: (A) The property of a soil that enables it to become stiff in a relatively short time on standing is called thixotropy (B) The ratio ... the undisturbed shear strength and remoulded shear strength is known remoulding loss (D) All the above

Last Answer : (D) All the above

Unconfined compression test it most suitable for determining the : 1. Sensitivity of clays 2. Settlement of embankments 3. ‘Strength’ of partially saturated clay sample 4. ‘Strength’ of fully saturated clay sample (a) 1, 2, 3 and 4 (b) 2 and 3 only (c) 3 and 4 only (d) 1 and 4 only

Description : Unconfined compression test it most suitable for determining the : 1. Sensitivity of clays 2. Settlement of embankments 3. ‘Strength’ of partially saturated clay sample 4. ‘Strength’ of fully saturated clay sample (a) 1, 2, 3 and 4 (b) 2 and 3 only (c) 3 and 4 only (d) 1 and 4 only

Last Answer : (d) 1 and 4 only

The water content of soil is defined as the ratio of (A) Volume of water to volume of given soil (B) Volume of water to volume of voids in soil (C) Weight of water to weight of air in voids (D) Weight of water to weight of solids of given mass of soil

Description : The water content of soil is defined as the ratio of (A) Volume of water to volume of given soil (B) Volume of water to volume of voids in soil (C) Weight of water to weight of air in voids (D) Weight of water to weight of solids of given mass of soil

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The void ratio in soils is defined as the ratio of the volume of voids to the volume of solids (B) The bulk density of a soil is defined as the unit weight of the soil (C) The dry density of a soil is defined as weight of solids to the total volume of the soil (D) All the above

Description : Pick up the correct statement from the following: (A) The void ratio in soils is defined as the ratio of the volume of voids to the volume of solids (B) The bulk density of a soil is defined as the ... of a soil is defined as weight of solids to the total volume of the soil (D) All the above

Last Answer : Answer: Option D

Consider the following statements: 1. For a saturated soil, Skempton’s B-parameter is nearly equal to unity. 2. For an undisturbed sensitive clay, the stress-strain curve shows a peak. 3. Interlocking contributes significantly to the shearing strength in case of dense sand. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. For a saturated soil, Skempton's B-parameter is nearly equal to unity. 2. For an undisturbed sensitive clay, the stress-strain curve shows a peak. 3. Interlocking contributes significantly to the shearing ... 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (a) 1, 2 & 3

The ratio of the volume of voids to the volume of soil solids in a given soil mass, is known (A) Porosity (B) Specific gravity (C) Void ratio (D) Water content

Description : The ratio of the volume of voids to the volume of soil solids in a given soil mass, is known (A) Porosity (B) Specific gravity (C) Void ratio (D) Water content

Last Answer : (C) Void ratio

If the volume of voids is equal to the volume of solids in a soil mass, then the values of porosity and voids ratio respectively are (A) 1.0 and 0.0 (B) 0.0 and 1.0 (C) 0.5 and 1.0 (D) 1.0 and 0.5

Description : If the volume of voids is equal to the volume of solids in a soil mass, then the values of porosity and voids ratio respectively are (A) 1.0 and 0.0 (B) 0.0 and 1.0 (C) 0.5 and 1.0 (D) 1.0 and 0.5

Last Answer : (C) 0.5 and 1.0

For testing a saturated clay for shear strength, the test recommended, is (A) Direct shear test (B) Triaxial compression test (C) Unconfined compression test (D) All the above

Description : For testing a saturated clay for shear strength, the test recommended, is (A) Direct shear test (B) Triaxial compression test (C) Unconfined compression test (D) All the above

Last Answer : Answer: Option C

The ratio of volume of voids to the total volume of soil mass is called (A) Air content (B) Porosity (C) Percentage air voids (D) Voids ratio

Description : The ratio of volume of voids to the total volume of soil mass is called (A) Air content (B) Porosity (C) Percentage air voids (D) Voids ratio

Last Answer : (B) Porosity

The ratio of the volume of water present in a given soil mass to the total volume of its voids, is known (A) Porosity (B) Void ratio (C) Percentage voids (D) Degree of saturation

Description : The ratio of the volume of water present in a given soil mass to the total volume of its voids, is known (A) Porosity (B) Void ratio (C) Percentage voids (D) Degree of saturation

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The ratio of total volume of voids in soil aggregates to the total volume of aggregate, is called Porosity (B) Water retained by the interstices due to molecular attraction, is called pellicular water (C) Sum of the percentage of specific yield and specific retention is 100 (D) All the above

Description : Pick up the correct statement from the following: (A) The ratio of total volume of voids in soil aggregates to the total volume of aggregate, is called Porosity (B) Water retained by the interstices ... (C) Sum of the percentage of specific yield and specific retention is 100 (D) All the above

Last Answer : Answer: Option D

A well is sunk in an unconfined aquifer having a saturated depth of 100 m. Assuming the equilibrium flow conditions and a homogeneous aquifer and radius of influence to be same, the ratio of discharges at 20 m and 40 m draw downs, is (A) 2/3 (B) 5/4 (C) 4/5 (D) 8/7

Description : A well is sunk in an unconfined aquifer having a saturated depth of 100 m. Assuming the equilibrium flow conditions and a homogeneous aquifer and radius of influence to be same, the ratio of discharges at 20 m and 40 m draw downs, is (A) 2/3 (B) 5/4 (C) 4/5 (D) 8/7

Last Answer : Answer: Option D

the water content of a fully saturated soil mass is 100%, then the voids ratio of the sample is (A) Less than specific gravity of soil (B) Equal to specific gravity of soil (C) Greater than specific gravity of soil (D) Independent of specific gravity of soil

Description : the water content of a fully saturated soil mass is 100%, then the voids ratio of the sample is (A) Less than specific gravity of soil (B) Equal to specific gravity of soil (C) Greater than specific gravity of soil (D) Independent of specific gravity of soil

Last Answer : Answer: Option B

The ratio of the undrained strength in the undrained state to the undrained strength, at the same water content, in the remoulded state, is called the sensivity of the clay. Its value for quick clays is (A) 4 (B) 8 (C) 12 (D) 20

Description : The ratio of the undrained strength in the undrained state to the undrained strength, at the same water content, in the remoulded state, is called the sensivity of the clay. Its value for quick clays is (A) 4 (B) 8 (C) 12 (D) 20

Last Answer : (D) 20

AA saturated clay is to be tested for shearing strength. Which test should be recommended? a) Direct shear test b) Triaxial shear test c) Vane shear test d) Unconfined compression*

Description : A saturated clay is to be tested for shearing strength. Which test should be recommended? a) Direct shear test b) Triaxial shear test c) Vane shear test d) Unconfined compression*

Last Answer : d) Unconfined compression*

The ratio of volume of water present in a given soil sample to the total volume of voids in it is known as a) Percentage of air voids b) Degree of saturation * c) Void rat

Description : The ratio of volume of water present in a given soil sample to the total volume of voids in it is known as a) Percentage of air voids b) Degree of saturation * c) Void rat

Last Answer : b) Degree of saturation *

The ratio of volume of air voids to the volume of total voids, is known as (A) Air content (B) Percentage air voids (C) Percentage voids(D) Porosity

Description : The ratio of volume of air voids to the volume of total voids, is known as (A) Air content (B) Percentage air voids (C) Percentage voids (D) Porosity

Last Answer : Answer: Option A

A coarse-grained soil has a voids ratio 0.75, and specific gravity as 2.75. The critical gradient at which quick sand condition occurs, is (A) 0.25 (B) 0.50 (C) 0.75 (D) 1.00

Description : A coarse-grained soil has a voids ratio 0.75, and specific gravity as 2.75. The critical gradient at which quick sand condition occurs, is (A) 0.25 (B) 0.50 (C) 0.75 (D) 1.00

Last Answer : (D) 1.00

Pick up the correct statement from the following: (A) The void space between the soil grains, is filled partly with air and partly with water (B) In perfectly saturated soil, the voids are completely filled with water (C) In dry soil, the voids are completely filled with air (D) All the above

Description : Pick up the correct statement from the following: (A) The void space between the soil grains, is filled partly with air and partly with water (B) In perfectly saturated soil, the voids are completely filled with water (C) In dry soil, the voids are completely filled with air (D) All the above

Last Answer : Answer: Option D

If the voids of a soil mass are full of air only, the soil is termed as (A) Air entrained soil (B) Partially saturated soil (C) Dry soil (D) Dehydrated soil

Description : If the voids of a soil mass are full of air only, the soil is termed as (A) Air entrained soil (B) Partially saturated soil (C) Dry soil (D) Dehydrated soil

Last Answer : Option C

The ratio of the volume of voids to the total volume of the given soil mass, is known (A) Porosity (B) Specific gravity (C) Void ratio (D) Water content

Description : The ratio of the volume of voids to the total volume of the given soil mass, is known (A) Porosity (B) Specific gravity (C) Void ratio (D) Water content

Last Answer : (A) Porosity

The dry density of soil is a) Always greater than the saturated density b) Weight of soil solids per unit of total volume prior to drying* c) Total weight of soil solids per unit of its total volume d) Total weight of soil mass per unit of its total volume

Description : The dry density of soil is a) Always greater than the saturated density b) Weight of soil solids per unit of total volume prior to drying* c) Total weight of soil solids per unit of its total volume d) Total weight of soil mass per unit of its total volume

Last Answer : b) Weight of soil solids per unit of total volume prior to drying*

Pick up the incorrect statement from the following. For performing compressive strength test of cement (A) Cement and standard sand mortar are used in the ratio of 1 : 3 (B) Water is added at the rate of (P/4) + 3.0 percentage of water where P is the percentage of water for standard consistency (C) A cube mould of 10 cm × 10 cm × 10 cm is used (D) The prepared moulds are kept in a atmosphere of 50% relative humidity

Description : Pick up the incorrect statement from the following. For performing compressive strength test of cement (A) Cement and standard sand mortar are used in the ratio of 1 : 3 (B) Water is added at the ... cm 10 cm is used (D) The prepared moulds are kept in a atmosphere of 50% relative humidity

Last Answer : Answer: Option A

The most critical consideration in the design of a rolled steel column carrying axial loads is the (a) Percentage elongation at yield and the net cross-sectional area (b) Critical bending strength and axial yield strength of material (c) Buckling strength based on the net area of the section and percentage elongation at ultimate load (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

Description : The most critical consideration in the design of a rolled steel column carrying axial loads is the (a) Percentage elongation at yield and the net cross-sectional area (b) Critical bending ... at ultimate load (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

Last Answer : (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

The ratio of settlement at any time 't' to the final settlement, is known as (A) Co-efficient of consolidation (B) Degree of consolidation (C) Consolidation index (D) Consolidation of undisturbed soil

Description : The ratio of settlement at any time 't' to the final settlement, is known as (A) Co-efficient of consolidation (B) Degree of consolidation (C) Consolidation index (D) Consolidation of undisturbed soil

Last Answer : (B) Degree of consolidation

The ratio of volume of air voids to the volume of voids is known as a) Percentage of air voids b) Porosity c) Degree of saturation d) Air content*

Description : The ratio of volume of air voids to the volume of voids is known as a) Percentage of air voids b) Porosity c) Degree of saturation d) Air content*

Last Answer : d) Air content*

The hydraulic head that would produce a quick condition in a sand stratum of thickness 1.5 m, specific gravity 2.67 and voids ratio 0.67 is equal to(A) 1.0 m (B) 1.5 m (C) 2.0 m (D) 3 m

Description : The hydraulic head that would produce a quick condition in a sand stratum of thickness 1.5 m, specific gravity 2.67 and voids ratio 0.67 is equal to (A) 1.0 m (B) 1.5 m (C) 2.0 m (D) 3 m

Last Answer : (B) 1.5 m

The ratio of the weight of given volume of soil solids to the weight of an equal volume of distilled water at the given temperature, is known (A) Porosity (B) Specific gravity (C) Void ratio (D) Water content

Description : The ratio of the weight of given volume of soil solids to the weight of an equal volume of distilled water at the given temperature, is known (A) Porosity (B) Specific gravity (C) Void ratio (D) Water content

Last Answer : (B) Specific gravity

Pick up the correct statement from the following: (A) O.M.C. refers to the moisture corresponding to the maximum point on the moisture content dry density curve (B) The line which shows moisture content dry density relation for soil containing a constant percentage of air voids, is known as air void line (C) The free fall of hammer for compaction is 30.5 cm (D) All the above

Description : Pick up the correct statement from the following: (A) O.M.C. refers to the moisture corresponding to the maximum point on the moisture content dry density curve (B) The line which shows moisture content dry ... void line (C) The free fall of hammer for compaction is 30.5 cm (D) All the above

Last Answer : (D) All the above

The reduction in volume of soil due to squeezing out of water from the voids, is termed (A) Primary consolidation (B) Primary compression (C) Primary time effect (D) All the above

Description : The reduction in volume of soil due to squeezing out of water from the voids, is termed (A) Primary consolidation (B) Primary compression (C) Primary time effect (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The volume of underground water extracted by gravity drainage from a saturated soil, is known as yield (B) The ratio of volume drained to the total volume of material drained, is known as specific yield (C) The sum of specific yield and specific retention, is equal to porosity (D) All the above

Description : Pick up the correct statement from the following:  (A) The volume of underground water extracted by gravity drainage from a saturated soil, is  known as yield  (B) The ratio of volume ... ) The sum of specific yield and specific retention, is equal to porosity  (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) An unconfined compression test is a special case of triaxial compression test (B) An unconfined compression test is a special case of direct shear test (C) The confining pressure is maximum during an unconfined compression test (D) The cylindrical specimen of a soil is subjected to major principal stress till it fails due to shearing along the plane of the failure

Description : Pick up the correct statement from the following: (A) An unconfined compression test is a special case of triaxial compression test (B) An unconfined compression test is a special case of direct ... subjected to major principal stress till it fails due to shearing along the plane of the failure

Last Answer : Option A

Select the incorrect statement. (A) In a direct shear box test, the plane of shear failure is predetermined (B) Better control is achieved on the drainage of the soil in a triaxial compression test (C) Stress distribution on the failure plane in the case of triaxial compression test is uniform (D) Unconfined compression test can be carried out on all types of soils

Description : Select the incorrect statement. (A) In a direct shear box test, the plane of shear failure is predetermined (B) Better control is achieved on the drainage of the soil in a triaxial compression ... compression test is uniform (D) Unconfined compression test can be carried out on all types of soils

Last Answer : Answer: Option D

For determining the compressive strength test on cement is, the percentage amount of water to be added as (Pa = Percentage of water for required consistency) [ A ] 0.25 Pa + 2.5 [ B ] 0.25 Pa + 3.5 [ C ] 0.35 Pa + 2.5 [ D ] 0.35 Pa + 3.5

Description : For determining the compressive strength test on cement is, the percentage amount of water to be added as (Pa = Percentage of water for required consistency) [ A ] 0.25 Pa + 2.5 [ B ] 0.25 Pa + 3.5 [ C ] 0.35 Pa + 2.5 [ D ] 0.35 Pa + 3.5

Last Answer : [ B ] 0.25 Pa + 3.5

Pick out the correct statement. (A) Fanning friction factor is inversely proportional to Reynolds number always (B) The property of a randomly packed bed (with raschig rings) is given by the ratio of the total volume to the volume of voids in the bed (C) Mach number in an incompressible fluid is always unity (D) Mach number is given by the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

Description : Pick out the correct statement. (A) Fanning friction factor is inversely proportional to Reynolds number always (B) The property of a randomly packed bed (with raschig rings) is given by the ratio of the ... the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

Last Answer : (D) Mach number is given by the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

Voids ratio of a soil mass can (A) Never be greater than unity (B) Be zero (C) Take any value greater than zero (D) Take values between 0 and 1 only

Description : Voids ratio of a soil mass can (A) Never be greater than unity (B) Be zero (C) Take any value greater than zero (D) Take values between 0 and 1 only

Last Answer : (C) Take any value greater than zero

The ultimate consolidation settlement of a soil is (A) Directly proportional to the voids ratio (B) Directly proportional to the compression index (C) Inversely proportional to the compression index (D) None of the above

Description : The ultimate consolidation settlement of a soil is (A) Directly proportional to the voids ratio (B) Directly proportional to the compression index (C) Inversely proportional to the compression index (D) None of the above

Last Answer : (B) Directly proportional to the compression index

If voids ratio is 0.67, water content is 0.188 and specific gravity is 2.68, the degree of saturation of the soil, is (A) 25 % (B) 40 % (C) 60 % (D) 75 %

Description : If voids ratio is 0.67, water content is 0.188 and specific gravity is 2.68, the degree of saturation of the soil, is (A) 25 % (B) 40 % (C) 60 % (D) 75 %

Last Answer : Answer: Option D

The ultimate consolidation settlement of a structure resting on a soil (A) Decreases with the increase in the initial voids ratio (B) Decreases with the decrease in the plastic limit (C) Increases with the increase in the initial voids ratio (D) Increases with the decrease in the porosity of the soil

Description : The ultimate consolidation settlement of a structure resting on a soil (A) Decreases with the increase in the initial voids ratio (B) Decreases with the decrease in the plastic limit (C) Increases ... increase in the initial voids ratio (D) Increases with the decrease in the porosity of the soil

Last Answer : Answer: Option A

Effective stress on soil (A) Increases voids ratio and decreases permeability (B) Increases both voids ratio and permeability (C) Decreases both voids ratio and permeability (D) Decreases voids ratio and increases permeability

Description : Effective stress on soil (A) Increases voids ratio and decreases permeability (B) Increases both voids ratio and permeability (C) Decreases both voids ratio and permeability (D) Decreases voids ratio and increases permeability

Last Answer : Answer: Option C

08. The ratio of velocity of fluid in an undisturbed stream to the velocity of sound wave is known as Mach number. A) Yes B) No

Description : 08. The ratio of velocity of fluid in an undisturbed stream to the velocity of sound wave is known as Mach number. A) Yes B) No

Last Answer : A

A higher modular ratio shows (A) Higher compressive strength of concrete (B) Lower compressive strength of concrete (C) Higher tensile strength of steel (D) Lower tensile strength of steel

Description : A higher modular ratio shows (A) Higher compressive strength of concrete (B) Lower compressive strength of concrete (C) Higher tensile strength of steel (D) Lower tensile strength of steel

Last Answer : Answer: Option B

The value of compression index for a remoulded sample whose liquid limit is 50% is (A) 0.028 (B) 0.28 (C) 036 (D) 0.036

Description : The value of compression index for a remoulded sample whose liquid limit is 50% is (A) 0.028 (B) 0.28 (C) 036 (D) 0.036

Last Answer : (B) 0.28

If the permissible compressive and tensile stresses in a singly reinforced beam are 50 kg/cm2 and 1400 kg/cm2 respectively and the modular ratio is 18, the percentage area At of the steel required for an economic section, is (A) 0.496 % (B) 0.596 % (C) 0.696 % (D) 0.796 %

Description : If the permissible compressive and tensile stresses in a singly reinforced beam are 50 kg/cm2 and 1400 kg/cm2 respectively and the modular ratio is 18, the percentage area At of the steel required for an economic section, is (A) 0.496 % (B) 0.596 % (C) 0.696 % (D) 0.796 %

Last Answer : Answer: Option C

1% of voids in a concrete mix would reduce its strength by about (A) 5 % (B) 10 % (C) 15 % (D) 20 %

Description : 1% of voids in a concrete mix would reduce its strength by about (A) 5 % (B) 10 % (C) 15 % (D) 20 %

Last Answer : (A) 5 %

A concrete mass containing 5% of voids [ A ] Increases its strength by 30% [ B ] Reduces its strength by 30% [ C ] Increases its strength by 5% [ D ] Reduces its strength by 5%

Description : A concrete mass containing 5% of voids [ A ] Increases its strength by 30% [ B ] Reduces its strength by 30% [ C ] Increases its strength by 5% [ D ] Reduces its strength by 5%

Last Answer : [ B ] Reduces its strength by 30%

Herbicides are less effective on weeds under which of the soil condition a). Field capacity b). Saturated c). Both a and b d). Dry

Description : Herbicides are less effective on weeds under which of the soil condition a). Field capacity b). Saturated c). Both a and b d). Dry

Last Answer : d). Dry

PROBLEM FA sample of soft saturated clay weighs 350 grams and has a volume of 205cc. After oven drying, the soil weighs 225 grams. Calculate the values of saturated unit weight, void ratio, porosity and specific gravity?

Description : PROBLEM FA sample of soft saturated clay weighs 350 grams and has a volume of 205cc. After oven drying, the soil weighs 225 grams. Calculate the values of saturated unit weight, void ratio, porosity and specific gravity?

Last Answer : {

Valid range for n, the percentage voids, is (A) 0 < n < 100(B) 0 < n < 100 (C) n > 0 (D) n < 0

Description : Valid range for n, the percentage voids, is (A) 0 < n < 100 (B) 0 < n < 100 (C) n > 0 (D) n < 0

Last Answer : (A) 0 < n < 100