An aggregate which passes through 25 mm I.S. sieve and is retained on 20 mm sieve, is said to be flaky if its least dimension is less than (A) 22.5 mm (B) 18.5 mm (C) 16.5 mm (D) 13.5 m

An aggregate which passes through 25 mm I.S. sieve and is retained on 20 mm sieve, is said to be
flaky if its least dimension is less than
(A) 22.5 mm
(B) 18.5 mm
(C) 16.5 mm
(D) 13.5 mm
by

1 Answer

Answer :

Answer: Option D
by

Related questions

If aggregates completely pass through a sieve of size 75 mm and are retained on a sieve of size 60 mm, the particular aggregate will be flaky if its minimum dimension is less than (A) 20.5 mm (B) 30.5 mm (C) 40.5 mm (D) 50.5 mm

Description : If aggregates completely pass through a sieve of size 75 mm and are retained on a sieve of size 60 mm, the particular aggregate will be flaky if its minimum dimension is less than (A) 20.5 mm (B) 30.5 mm (C) 40.5 mm (D) 50.5 mm

Last Answer : Answer: Option C

An aggregate is said to be flaky, if its least dimension is less than (A) 2/3 mean dimension (B) 3/4 mean dimension (C) 3/5 mean dimension (D) 5/8 mean dimension

Description : An aggregate is said to be flaky, if its least dimension is less than (A) 2/3 mean dimension (B) 3/4 mean dimension (C) 3/5 mean dimension (D) 5/8 mean dimension

Last Answer : (C) 3/5 mean dimension

An aggregate is said to be flaky, if its least dimension is less than [ A ] 2/3 mean dimension [ B ] 3/4 mean dimension [ C ] 3/5 mean dimension [ D ] 5/8 mean dimension

Description : An aggregate is said to be flaky, if its least dimension is less than [ A ] 2/3 mean dimension [ B ] 3/4 mean dimension [ C ] 3/5 mean dimension [ D ] 5/8 mean dimension

Last Answer : [ C ] 3/5 mean dimension

An aggregate is said to be flaky if its least dimension is less than (A) 1/5th of mean dimension (B) 2/5th of mean dimension (C) 3/5th of mean dimension (D) 4/5th of mean dimension

Description : An aggregate is said to be flaky if its least dimension is less than (A) 1/5th of mean dimension (B) 2/5th of mean dimension (C) 3/5th of mean dimension (D) 4/5th of mean dimension

Last Answer : Answer: Option C

If 20 kg of coarse aggregate is sieved through 80 mm, 40 mm, 20 mm, 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron and 150 micron standard sieves and the weights retained are 0 kg, 2 kg, 8 kg, 6 kg, 4 kg respectively, the fineness modulus of the aggregate, is (A) 7.30 (B) 7.35 (C) 7.40 (D) 7.45

Description : If 20 kg of coarse aggregate is sieved through 80 mm, 40 mm, 20 mm, 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron and 150 micron standard sieves and the weights retained are 0 kg, 2 kg, 8 kg, ... , the fineness modulus of the aggregate, is (A) 7.30 (B) 7.35 (C) 7.40 (D) 7.45

Last Answer : Answer: Option C

A flaky aggregate is said to be elongated if its length is (A) Equal to the mean size (B) Twice the mean size (C) Thrice the mean size (D) Four times the mean size

Description : A flaky aggregate is said to be elongated if its length is (A) Equal to the mean size (B) Twice the mean size (C) Thrice the mean size (D) Four times the mean size

Last Answer : Answer: Option B

For an ordinary Portland cement (A) Residual does not exceed 10% when sieved through IS Sieve No. 9 (B) Soundness varies from 5 to 10 mm (C) Initial setting time is not less than 30 minutes (D) Compressive stress after 7 days, is not less than 175 kg/cm2

Description : For an ordinary Portland cement (A) Residual does not exceed 10% when sieved through IS Sieve No. 9 (B) Soundness varies from 5 to 10 mm (C) Initial setting time is not less than 30 minutes (D) Compressive stress after 7 days, is not less than 175 kg/cm2

Last Answer : (C) Initial setting time is not less than 30 minutes

The type of aggregates not suitable for high strength concrete and for pavements subjected to tension, is (A) Rounded aggregate (B) Irregular aggregate (C) Angular aggregate (D) Flaky aggregat

Description : The type of aggregates not suitable for high strength concrete and for pavements subjected to tension, is (A) Rounded aggregate (B) Irregular aggregate (C) Angular aggregate (D) Flaky aggregat

Last Answer : Answer: Option A

Workability of concrete for a given water content is good if the aggregates, are (A) Rounded aggregate (B) Irregular aggregate (C) Angular aggregate (D) Flaky aggregate

Description : Workability of concrete for a given water content is good if the aggregates, are (A) Rounded aggregate (B) Irregular aggregate (C) Angular aggregate (D) Flaky aggregate

Last Answer : Answer: Option A

For the improvement of work ability of concrete , the shape of aggregate recommended is (a) Irregular (b) Angular (c) Round (d) Flaky

Description : For the improvement of work ability of concrete , the shape of aggregate recommended is (a) Irregular (b) Angular (c) Round (d) Flaky

Last Answer : (c) Round

The aggregate which pass through 75mm IS sieve and entirely retain on 4.75 IS sieve is known as (a) Cyclopean aggregate (b) Coarse aggregate (c)Fine aggregate (d) Aall-in-aggregate

Description : The aggregate which pass through 75mm IS sieve and entirely retain on 4.75 IS sieve is known as (a) Cyclopean aggregate (b) Coarse aggregate (c)Fine aggregate (d) Aall-in-aggregate

Last Answer : (b) Coarse aggregate

If a grading curve is horizontal between the portions of 20 mm I.S. Sieve and 4.75 mm I.S. Sieve, the graded aggregates do not contain (A) 20 mm particles (B) 10 mm particles (C) 4.75 mm particles (D) All the above

Description : If a grading curve is horizontal between the portions of 20 mm I.S. Sieve and 4.75 mm I.S. Sieve, the graded aggregates do not contain (A) 20 mm particles (B) 10 mm particles (C) 4.75 mm particles (D) All the above

Last Answer : Answer: Option D

nternal diameter of thimble in conventional type of crucible is? (i) 14-16 mm (i) 16-18 mm (iii) 18-20 mm* (iv) 20-22 mm

Description : nternal diameter of thimble in conventional type of crucible is? (i) 14-16 mm (i) 16-18 mm (iii) 18-20 mm* (iv) 20-22 mm

Last Answer : (iii) 18-20 mm*

The minimum cover in a slab should neither be less than the diameter of bar nor less than (A) 10 mm (B) 15 mm (C) 25 mm (D) 13 m

Description : The minimum cover in a slab should neither be less than the diameter of bar nor less than (A) 10 mm (B) 15 mm (C) 25 mm (D) 13 mm

Last Answer : Answer: Option B

A national random sample of 20 ACT scores from 2010 is listed below. Calculate the sample mean and standard deviation. 29, 26, 13, 23, 23, 25, 17, 22, 17, 19, 12, 26, 30, 30, 18, 14, 12, 26, 17, 18 a. 20.50, 5.79 b. 20.50, 5.94 c. 20.85, 5.79 d. 20.85, 5.94

Description : A national random sample of 20 ACT scores from 2010 is listed below. Calculate the sample mean and standard deviation. 29, 26, 13, 23, 23, 25, 17, 22, 17, 19, 12, 26, 30, 30, 18, 14, 12, 26, 17, 18 a. 20.50, 5.79 b. 20.50, 5.94 c. 20.85, 5.79 d. 20.85, 5.94

Last Answer : Katie earned 84,92,84,75 and 70 on her first 5 tests. What is the minimum grade Katie needs to earn on the next test to have a mean of 84?

A soil sample has passing 0.075 mm sieve = 60% liquid limit = 65% and plastic limit = 40%. The group index of the soil, is (A) 5 (B) 20 (C) 40(D) None of these

Description : A soil sample has passing 0.075 mm sieve = 60% liquid limit = 65% and plastic limit = 40%. The group index of the soil, is (A) 5 (B) 20 (C) 40 (D) None of these

Last Answer : (D) None of these

Pick up the correct statement from the following: (A) The ratio of total volume of voids in soil aggregates to the total volume of aggregate, is called Porosity (B) Water retained by the interstices due to molecular attraction, is called pellicular water (C) Sum of the percentage of specific yield and specific retention is 100 (D) All the above

Description : Pick up the correct statement from the following: (A) The ratio of total volume of voids in soil aggregates to the total volume of aggregate, is called Porosity (B) Water retained by the interstices ... (C) Sum of the percentage of specific yield and specific retention is 100 (D) All the above

Last Answer : Answer: Option D

A bike starts with a speed of 60 km/hr at 8a.m. Due to the problem in engine it reduces its speed as 20 km/hr for every 1 hour. After 9 am, the time taken to covers 15 km is: a) 13 minutes and 20 seconds b) 15 minutes and 09 seconds c) 18 minutes and 15 seconds d) 22 minutes and 30 seconds

Description : A bike starts with a speed of 60 km/hr at 8a.m. Due to the problem in engine it reduces its speed as 20 km/hr for every 1 hour. After 9 am, the time taken to covers 15 km is: a) 13 minutes and 20 seconds b) 15 minutes and 09 seconds c) 18 minutes and 15 seconds d) 22 minutes and 30 seconds

Last Answer : 15 min

Find the range of the given data : 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11, 20 -Maths 9th

Description : Find the range of the given data : 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11, 20 -Maths 9th

Last Answer : Here, the minimum and maximum values of given data are 6 and 32 respectively. Range = 32 – 6 = 26

Find the range of the given data : 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11, 20 -Maths 9th

Description : Find the range of the given data : 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11, 20 -Maths 9th

Last Answer : Here, the minimum and maximum values of given data are 6 and 32 respectively. Range = 32 – 6 = 26

The range of the data 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11 and 20 is -Maths 9th

Description : The range of the data 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11 and 20 is -Maths 9th

Last Answer : In conclusion, the range of data 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11, and 20 is 26.

The range of the data 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11 and 20 is -Maths 9th

Description : The range of the data 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11 and 20 is -Maths 9th

Last Answer : (d) In a given data, maximum value = 32 and minimum value = 6 We know, range of the data = maximum value – minimum value = 32 – 6 = 26 Hence, the range of the given data is 26.

f the temperature falls below 18 degrees, the heating is switched on. When the temperature reaches 21 degrees, the heating is switched off. What is the minimum set of test input values to cover all valid equivalence partitions? A. 15, 19 and 25 degrees B. 17, 18, 20 and 21 degrees C. 18, 20 and 22 degrees D. 16 and 26 degrees

Description : f the temperature falls below 18 degrees, the heating is switched on. When the temperature reaches 21 degrees, the heating is switched off. What is the minimum set of test input values to cover all valid equivalence ... 17, 18, 20 and 21 degrees C. 18, 20 and 22 degrees D. 16 and 26 degrees

Last Answer : A. 15, 19 and 25 degrees

I.S. Sieve Nos. 10 mm and 4.75 mm are generally used for grading of (A) Coarse aggregates (B) Fine aggregates (C) Neither (a) nor (b) (D) Both (a) and (b)

Description : I.S. Sieve Nos. 10 mm and 4.75 mm are generally used for grading of (A) Coarse aggregates (B) Fine aggregates (C) Neither (a) nor (b) (D) Both (a) and (b)

Last Answer : Answer: Option D

The Minimum bar spacing should not be less than [ A ] Diameter of the largest bar [ B ] Maximum size of aggregate [ C ] Greater of diameter of the largest bar and maximum size of aggregate [ D ] Greater of diameter of the largest bar and maximum size of aggregate plus 5 mm

Description : The Minimum bar spacing should not be less than [ A ] Diameter of the largest bar [ B ] Maximum size of aggregate [ C ] Greater of diameter of the largest bar and maximum size of aggregate [ D ] Greater of diameter of the largest bar and maximum size of aggregate plus 5 mm

Last Answer : [ D ] Greater of diameter of the largest bar and maximum size of aggregate plus 5 mm

For a 50 kg cement bag water required, is (A) 16.5 litres (B) 18.5 litres (C) 20.5 litres (D) 22.5 litres

Description : For a 50 kg cement bag water required, is (A) 16.5 litres (B) 18.5 litres (C) 20.5 litres (D) 22.5 litres

Last Answer : Answer: Option D

Which of the following statement is correct (a) The maximum size of coarse aggregate should not exceed one fourth of the minimum dimension of the plain concrete member. (b) The maximum size of coarse aggregate should not exceed one fifty of the minimum dimension of the reinforced concrete member (c)The aggregates of 40mm, 20mm and 10mm sizes are commonly used for concrete works (d) All the above

Description : Which of the following statement is correct (a) The maximum size of coarse aggregate should not exceed one fourth of the minimum dimension of the plain concrete member. (b) The maximum size of coarse ... aggregates of 40mm, 20mm and 10mm sizes are commonly used for concrete works (d) All the above

Last Answer : (d) All the above

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Description : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Last Answer : 22

Which is the first engine less Train in India? A. Train 16 B. Train 18 C. Train 20 D. Train 22

Description : Which is the first engine less Train in India? A. Train 16 B. Train 18 C. Train 20 D. Train 22

Last Answer : B [Train 18] Explanation: Vande Bharat Express, also known as Train 18, is an Indian semi-high speed intercity electric multiple unit.

Find the range of the data : 14, 15, 16, 18, 19, 25, 30, 41, 26, 16, 13, 18, 20 and 26.

Description : Find the range of the data : 14, 15, 16, 18, 19, 25, 30, 41, 26, 16, 13, 18, 20 and 26.

Last Answer : Find the range of the data : 14, 15, 16, 18, 19, 25, 30, 41, 26, 16, 13, 18, 20 and 26.

Flat rate parcel rates Flat Rate Parcel Boxes size Dimension of boxes (in mm) Weight (in Kg.) Tariff (in Rs.) Small - S 250*50*300 0 to 1 125 Medium - M 250*100*300 Above 1 to 2.5 200 Large - L 300*250*200 Above 2.5 to 5 400

Description : Flat rate parcel rates Flat Rate Parcel Boxes size Dimension of boxes (in mm) Weight (in Kg.) Tariff (in Rs.) Small - S 250*50*300 0 to 1 125 Medium - M 250*100*300 Above 1 to 2.5 200 Large - L 300*250*200 Above 2.5 to 5 400

Last Answer : Large - L 300*250*200 Above 2.5 to 5 400

The diameter of hole for 20 dia rivet shall be a) 23 mm b) 18 mm c) 21.5 mm* d) 22 mm

Description : The diameter of hole for 20 dia rivet shall be a) 23 mm b) 18 mm c) 21.5 mm* d) 22 mm

Last Answer : c) 21.5 mm*

Along column is one whose ratio of effective length to its least lateral dimension exceeds (a) 5 (b) 10 (c) 12 (d) 20

Description : Along column is one whose ratio of effective length to its least lateral dimension exceeds (a) 5 (b) 10 (c) 12 (d) 20

Last Answer : (c) 12

In slump test, each layer of concrete is compacted by a steel rod 60 cm long and of 16 mm diameter for (A) 20 times (B) 25 times (C) 30 times (D) 50 time

Description : In slump test, each layer of concrete is compacted by a steel rod 60 cm long and of 16 mm diameter for (A) 20 times (B) 25 times (C) 30 times (D) 50 time

Last Answer : Answer: Option B

An ordinary Portland cement when tested for its fineness, should not leave any residue on I.S. sieve No. 9, more than (A) 5 % (B) 10 % (C) 15 % (D) 20 %

Description : An ordinary Portland cement when tested for its fineness, should not leave any residue on I.S. sieve No. 9, more than (A) 5 % (B) 10 % (C) 15 % (D) 20 %

Last Answer : (B) 10 %

What is the maximum shear stress induced in a solid shaft of 50 mm diameter which is subjected to both bending moment and torque of 300 kN.mm and 200 kN.mm respectively? a. 9.11 N/mm2 b. 14.69 N/mm2 c. 16.22 N/mm2 d. 20.98 N/mm2

Description : What is the maximum shear stress induced in a solid shaft of 50 mm diameter which is subjected to both bending moment and torque of 300 kN.mm and 200 kN.mm respectively? a. 9.11 N/mm2 b. 14.69 N/mm2 c. 16.22 N/mm2 d. 20.98 N/mm2

Last Answer : b. 14.69 N/mm2

On what dates of April 1994 did SUNDAYfall? (A) 2,9,16,23,30 (B) 3,10,17,24 (C) 4,11,18,25 (D) 1,8,15,22,29

Description : On what dates of April 1994 did SUNDAYfall? (A) 2,9,16,23,30 (B) 3,10,17,24 (C) 4,11,18,25 (D) 1,8,15,22,29

Last Answer : Answer: B Solution:. Let us find the day on 1st April, 1994. 2000 years have 0 odd day. We have to calculate day on 1st April, 1994. 2000-1994 = 6 Years. 1996 is leap year and have 4 odd days Ordinary years ... was Friday Thus, on 3 rd , 10 th , 17 th , 24 th will be Sunday fall on April 1994.

According to IS Code , the requirement of an ordinary Portland cement is (a) The residue does not exceed 10% when sieved through is sieve no .9 (b) Its initial setting time is not less than 30 minutes. (c) its expansion is not morethan 10mm for unaerated cement (d) All the above.

Description : According to IS Code , the requirement of an ordinary Portland cement is (a) The residue does not exceed 10% when sieved through is sieve no .9 (b) Its initial setting time is not less than 30 minutes. (c) its expansion is not morethan 10mm for unaerated cement (d) All the above.

Last Answer : (d) All the above.

A column is regarded as long column if the ratio of its effective length and lateral dimension, exceeds (A) 10 (B) 15 (C) 20 (D) 25

Description : A column is regarded as long column if the ratio of its effective length and lateral dimension, exceeds (A) 10 (B) 15 (C) 20 (D) 25

Last Answer : Answer: Option B

The mean monthly temperature and rainfall of a station are given below: Month Temperature ºC Rainfall mm January 24 2 February 25 1 March 27 0 April 29 3 May 30 16 June 29 520 July 28 709 August 27 419 September 27 297 October 28 88 November 28 21 December 26 2 Yearly 27 2078 The above said data relate to which of following cities? [CDS 2004] (a) Ahmedabad (b) Bangalore (c) Mumbai (d) Vadodara

Description : The mean monthly temperature and rainfall of a station are given below: Month Temperature ºC Rainfall mm January 24 2 February 25 1 March 27 0 April 29 3 May 30 16 June 29 520 July 28 709 August 27 419 ... to which of following cities? [CDS 2004] (a) Ahmedabad (b) Bangalore (c) Mumbai (d) Vadodara

Last Answer : Ans: (c)

An aggregate is known as cyclopean aggregate if its size is more than (A) 4.75 mm (B) 30 mm (C) 60 mm (D) 75 mm

Description : An aggregate is known as cyclopean aggregate if its size is more than (A) 4.75 mm (B) 30 mm (C) 60 mm (D) 75 mm

Last Answer : Answer: Option D

A 600 mm square bearing plate settles by 15 mm in plate load test on a cohesion-less soil under an intensity of loading of 0.2 N/ram². The settlement of a prototype shallow footing 1 m square under the same intensity of loading is (A) 15 mm (B) Between 15 mm and 25 mm (C) 25 mm (D) Greater than 25 mm

Description : A 600 mm square bearing plate settles by 15 mm in plate load test on a cohesion-less soil under an intensity of loading of 0.2 N/ram². The settlement of a prototype shallow footing 1 m square under the same intensity of ... (A) 15 mm (B) Between 15 mm and 25 mm (C) 25 mm (D) Greater than 25 mm

Last Answer : Answer: Option B

In screen analysis, the notation +5 mm/-10 mm means particles passing through (A) 10 mm screen and retained on 5 mm screen (B) 5 mm screen and retained on 10 mm screen (C) Both 5 mm and 10 mm screens (D) Neither 5 mm nor 10 mm screen

Description : In screen analysis, the notation +5 mm/-10 mm means particles passing through (A) 10 mm screen and retained on 5 mm screen (B) 5 mm screen and retained on 10 mm screen (C) Both 5 mm and 10 mm screens (D) Neither 5 mm nor 10 mm screen

Last Answer : (A) 10 mm screen and retained on 5 mm screen

The difference in the reservoir level and the lowest point of the water mains is 180 m. The expected pressure due to water hammer is 7.5 kg/cm2 in a pressure conduit of diameter 1 m. Assuming the efficiency of the riveted joints of the pipe as 0.6 and minimum cover 3 mm for corrosion, the thickness of the pipe materials, is (A) 10 mm (B) 15 mm (C) 20 mm (D) 25 mm

Description : The difference in the reservoir level and the lowest point of the water mains is 180 m. The  expected pressure due to water hammer is 7.5 kg/cm2  in a pressure conduit of diameter 1 m.  Assuming the efficiency of the ... , is  (A) 10 mm  (B) 15 mm  (C) 20 mm  (D) 25 mm 

Last Answer : (C) 20 mm

The minimum thickness of the cover at the end of a reinforcing bar should not be less than twice the diameter of the bar subject to a minimum of (A) 10 mm (B) 15 mm (C) 20 mm (D) 25 mm

Description : The minimum thickness of the cover at the end of a reinforcing bar should not be less than twice the diameter of the bar subject to a minimum of (A) 10 mm (B) 15 mm (C) 20 mm (D) 25 mm

Last Answer : Answer: Option D

The minimum cover to the ties or spirals should not be less than (A) 15 mm (B) 20 mm (C) 25 mm (D) 50 mm

Description : The minimum cover to the ties or spirals should not be less than (A) 15 mm (B) 20 mm (C) 25 mm (D) 50 mm

Last Answer : Answer: Option C

If the engineer-in-charge approves, the 10 cm cubes may be used for the work test of concrete provided maximum nominal size of aggregate, does not exceed (A) 10 cm (B) 15 cm (C) 20 cm (D) 25 cm

Description : If the engineer-in-charge approves, the 10 cm cubes may be used for the work test of concrete provided maximum nominal size of aggregate, does not exceed (A) 10 cm (B) 15 cm (C) 20 cm (D) 25 cm

Last Answer : Answer: Option C

The type of aggregates of same nominal size, which contain less voids when compacted, are (A) Rounded spherical (B) Irregular (C) Flaky (D) None of these

Description : The type of aggregates of same nominal size, which contain less voids when compacted, are (A) Rounded spherical (B) Irregular (C) Flaky (D) None of these

Last Answer : Answer: Option A

If the original scale of a negative is 1 : 10,000, the ground resolution, considering that we get nearly 20 lines pair per mm, will be : (a) 50 mm (b) 20 cm (c) 2 m (d) 25 cm

Description : If the original scale of a negative is 1 : 10,000, the ground resolution, considering that we get nearly 20 lines pair per mm, will be : (a) 50 mm (b) 20 cm (c) 2 m (d) 25 cm

Last Answer : (d) 25 cm