Description : To ascertain the maximum permissible eccentricity of loads on circular columns, the rule generally followed, is (A) Middle half rule of columns (B) Middle third rule of columns (C) Middle fourth rule of columns (D) None of these
Last Answer : (C) Middle fourth rule of columns
Description : When the reservoir is full, the maximum compressive force in a gravity dam is produced (A) At the toe (B) At the heel (C) Within the middle third of base (D) At centre of base
Last Answer : Answer: Option A
Description : The eccentricity (e) of a hollow circular column, external diameter 25 cm, internal diameter 15 cm for an eccentric load 100 t for non-development of tension, is (A) 2.75 cm (B) 3.00 cm (C) 3.50 cm (D) 4.25 cm
Last Answer : (D) 4.25 cm
Description : The greatest eccentricity which a load W can have without producing tension on the cross-section of a short column of external diameter D and internal diameter d, is (A) 4W/ (D² - d²) (B) (D² - d²)/32D (C) (D² + d²)/8D (D) (D² - d²)/8D
Last Answer : (C) (D² + d²)/8D
Description : The stability of a dam is checked for (A) Tension at the base (B) Overturning of the wall or dam (C) Sliding of the wall or dam (D) All of these
Last Answer : Answer: Option D
Description : To have pressure wholly compressive under the base of a retaining wall of width b, the resultant of the weight of the wall and the pressure exerted by the retained, earth should have eccentricity not more than (A) b/3 (B) b/4 (C) b/5 (D) b/6
Description : Regarding the working stress design of under reinforced concrete section, (a) The neutral axis depth will be greater than that of a balanced section. (b) The stress in steel intension will reach ... on the tension side is also be considered for calculating the moment of resistance of the section.
Last Answer : both b&c
Description : As per IS: 456, permissible bond stress for plain bars in tension, in working stress method, where M20, is the grade of concrete [ A ] 0.6 N/mm2 [ B ] 0.8 N/mm2 [ C ] 1.0 N/mm2 [ D ] 1.2 N/mm2
Last Answer : [ B ] 0.8 N/mm2
Description : A horizontal load of 120 kg/mt is to be carried by a cable suspended between supports at same level and 60 mts apart. If the maximum permissible tension is 36,000 kg the required length of cable is a.63.3 mets b.62.5 mts c.60.8 mts d.107 dynes e.60.1 mts
Last Answer : e. 60.1 mts
Description : If permissible working stresses in steel and concrete are respectively 1400 kg/cm2 and 80 kg/cm2 and modular ratio is 18, in a beam reinforced in tension side and of width 30 cm and having effective depth 46 cm, the lever arms of the section, is (A) 37 cm (B) 38 cm (C) 39 cm (D) 40 cm
Description : The section of a reinforced beam where most distant concrete fibre in compression and tension in steel attains permissible stresses simultaneously, is called (A) Balanced section B) Economic section (C) Critical section (D) All the above
Description : The length of lap in tension reinforcement should not be less than the bar diameter × (actual tension / four times the permissible average bond stress) if it is more than (A) 18 bar diameters (B) 24 bar diameters (C) 30 bar diameters (D) 36 bar diameters
Last Answer : Answer: Option C
Description : If the permissible stress in steel in tension is 140 N/mm², then the depth of neutral axis for a singly reinforced rectangular balanced section will be (A) 0.35 d (B) 0.40 d (C) 0.45 d (D) Dependent on grade of concrete also
Last Answer : Answer: Option B
Description : The average permissible stress in bond for plain bars in tension is (A) Increased by 10% for bars in compression (B) Increased by 25% for bars in compression (C) Decreased by 10% for bars in compression (D) Decreased by 25% for bars in compression
Description : The section of a reinforced beam where most distant concrete fiber in compression and tension in steel attains permissible stresses simultaneously is called (i)Balanced section (ii)Economic section (iii)Critical section [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii
Last Answer : [ D ] i, ii and iii
Description : For a rectangular foundation of width b, eccentricity of load should not exceed (A) b/2 (B) b/3 (C) b/4 (D) b/6
Last Answer : For a rectangular foundation of width b, eccentricity of load should not exceed (A) b/2 (B) b/3 (C) b/4 (D) b/6
Description : A masonry dam (density = 20,000 N/m3 ) 6 m high, one metre wide at the top and 4 m wide at the base, has vertical water face. The minimum stress at the base of the dam when the reservoir is full, will be (A) 75 N/m2 (B) 750 N/m2 (C) 7500 N/m2 (D) 75000 N/m
Last Answer : (C) 7500 N/m
Description : The frame consists of a steel beam welded rigidly to two vertical channels. An eccentric exciter weighing 250 N is attached to the beam, which weighs 10 KN and is used to excite the frame. The unbalance weight of ... ends, magnification factor at resonance is A. 307.5 B. 3.075 C. 30.75 D. 0.3075
Last Answer : C. 30.75
Description : According to IS:456-2000, the minimum eccentricity in no case [ A ] Shall be not less than 20mm [ B ] Shall be not greater than 30mm [ C ] Shall be 20mm-30mm [ D ] None of the above
Last Answer : [ A ] Shall be not less than 20mm
Description : Presence of tail water in a gravity dam (i) Increases the principal stress (ii) Decreases the principal stress (iii) Increases the shear stress (iv) Decreases the shear stress The correct answer is A) (i) and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv)
Description : The major resisting force in a gravity dam is (A) Water pressure (B) Wave pressure (C) Self-weight of dam (D) Uplift pressure
Description : What is maximum eccentricity?
Last Answer : Need answer
Description : For the construction of cement concrete floor, the maximum permissible size of aggregate, is (A) 4 mm (B) 6 mm (C) 8 mm (D) 10 mm
Description : Which one of the following statements is correct? (A) When the axes of rotation of the graduated circle and the verniers are not coincident, the instrument possesses eccentricity (B) The mean of the ... Vernier may be used if the readings of two verniers differ by a constant (D) All the above
Last Answer : (D) All the above
Description : If the tendon is placed at an eccentricity e below the centroidal axis of the longitudinal axis of a rectangular beam (sectional modulus Z and stressed load P in tendon) the stress at the extreme top edge (A) Is ... by PZ/e (B) Is increased by Pe/Z (C) Is decreased by Pe/Z (D) Remains unchanged
Description : A column said to be under uniaxial bending, when the eccentricity is [ A ] with respect to one axis only [ B ] with respect to two axes [ C ] zero [ D ] 20 mm
Last Answer : [ A ] with respect to one axis only
Description : Froude's number is the ratio of inertia force to (A) Pressure force (B) Elastic force (C) Gravity force (D) Surface tension force
Description : Reynold's number is the ratio of the inertia force to the (A) Surface tension force (B) Viscous force (C) Gravity force (D) Elastic force
Description : The ratio of specific weight of a liquid to the specific weight of pure water at a standard temperature is called (A) Density of liquid (B) Specific gravity of liquid (C) Compressibility of liquid (D) Surface tension of liquid
Description : Select the correct statement (A) Weber's number is the ratio of inertia force to elastic force. (B) Weber's number is the ratio of gravity force to surface tension force. (C) Weber's number ... force to pressure force. (D) Weber's number is the ratio of inertia force to surface tension force.
Description : The base of a column is subjected to moment. If the intensity of bearing pressure due to axial load is equal to stress due to moment, then the bearing pressure between the base and the concrete ... Tension at one end and compression at the other end (d) Compression, verying as a parabolic profile
Last Answer : (b) Zero at one end and compression at the other end
Description : The maximum permissible chloride content in treated water of public water supplies should not exceed (A) 50 P.P.M. (B) 100 P.P.M. (C) 150 P.P.M. (D) 250 P.P.M.
Last Answer : (D) 250 P.P.M.
Description : Maximum permissible colour for domestic water supplies, based on Cobalt scale, is (A) 5 P.P.M. (B) 10 P.P.M. (C) 15 P.P.M. (D) 20 P.P.M.
Last Answer : (D) 20 P.P.M.
Description : The maximum permissible colour for domestic supplies based on cobalt scale, is (A) 5 ppm (B) 10 ppm (C) 15 ppm (D) 20 ppm
Last Answer : (D) 20 ppm
Description : The maximum permissible nitrites in public water supplies, is (A) Nil (B) 0.5 P.P.M. (C) 1.0. P.P.M. (D) 1.5 P.P.M
Last Answer : (A) Ni
Description : The maximum permissible hardness for public supplies is (A) 95 mg/litre (B) 105 mg/litre (C) 115 mg/litre (D) 125 mg/litre
Last Answer : (C) 115 mg/litre
Description : The cross sections of the beams of equal length are a circle and a square whose permissible bending stress is same under same maximum bending. The ratio of their flexural weights is, (A) 1.118 (B) 1.338 (C) 1.228 (D) 1.108
Last Answer : (A) 1.118
Description : The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose ends are hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2 , the permissible maximum crippling load will be (A) 1.288 tonnes (B) 12.88 (C) 128.8 tonnes (D) 288.0
Last Answer : (B) 12.88
Description : The maximum load to which a fillet joint of length can be subjected to, is (A) 0.7 × S × fillet size × L (B) 2 × S × fillet size × L (C) Permissible shear stress × fillet size × L (D) (S × fillet size × L)/3
Last Answer : (A) 0.7 × S × fillet size × L
Description : The maximum twisting moment a shaft can resist, is the product of the permissible shear stress and (A) Moment of inertia (B) Polar moment of inertia (C) Polar modulus (D) Modulus of rigidly
Last Answer : (C) Polar modulus
Description : The maximum permissible size of aggregates to be used in casting the ribs of a slab, is (A) 5 mm (B) 7.5 mm (C) 10 mm (D) 15 mm
Description : For the construction of cement concrete dams, the maximum permissible size of the aggregates, is (A) 40 mm (B) 50 mm (C) 60 mm (D) 70 mm
Description : The maximum permissible differential settlement, in case of foundations in clayey soil, is usually limited to (A) 10 mm (B) 20 mm (C) 30 mm (D) 40 mm
Description : The maximum permissible deflection of a timber beam supporting a roof, is (A) L/100 (B) L/150 (C) L/260 (D) L/360
Description : In case of foundations on sandy soil, maximum permissible differential settlement, is usually limited to (A) 15 mm (B) 25 mm (C) 35 mm (D) 45 mm
Description : The section in which concrete is not fully stressed to its permissible value when stress in steel reaches its maximum value is (a) Under-reinforced section (b) Over-reinforced section (c) Critical section (d) Balanced section
Last Answer : (a) Under-reinforced section
Description : Which one of the following is the highest gravity dam in the world? (1) Beas Dam (2) Nangal Dam (3) Bhakra Dam (4) Hirakud Dam
Last Answer : (3) Bhakra Dam Explanation: Currently, the tallest dam in the world is the Nurek Dam, an embankment dam in Tajikistan at 300 m high. The tallest arch dam is the recently completed 292 ... under construction in China. Natural landslide dams are also quite competitive in height but not listed here.
Description : Which is the highest gravity dam in the world
Last Answer : Bhakra Dam
Description : A concrete gravity dam built on Satluj river. a) Bhakra Dam b) Salal Dam c) Rana Pratap Sagar Dam d) Dantiwada Dam
Last Answer : a) Bhakra Dam
Description : Which one of the following is the highest gravity dam in the world ? (1) Beas Dam (2) Nangal Dam (3) Bhakra Dam (4) Hirakud Dam