Which one of the following statements is correct? (A) When the axes of rotation of the graduated circle and the verniers are not coincident, the instrument possesses eccentricity (B) The mean of the readings of the two verniers gives correct reading free from the eccentricity (C) One Vernier may be used if the readings of two verniers differ by a constant (D) All the above

Which one of the following statements is correct?
(A) When the axes of rotation of the graduated circle and the verniers are not coincident, the
instrument possesses eccentricity
(B) The mean of the readings of the two verniers gives correct reading free from the eccentricity
(C) One Vernier may be used if the readings of two verniers differ by a constant
(D) All the above
by

1 Answer

Answer :

(D) All the above
by

Related questions

In a precision traverse, included angles are measured by setting the vernier (A) To read zero exactly on back station (B) To read 5° exactly on back station (C) Somewhere near zero and reading both verniers on back station (D) All the above

Description : In a precision traverse, included angles are measured by setting the vernier  (A) To read zero exactly on back station  (B) To read 5° exactly on back station  (C) Somewhere near zero and reading both verniers on back station  (D) All the above

Last Answer : (C) Somewhere near zero and reading both verniers on back station 

In precision theodolite traverse if included angles are read twice and the mean reading accepted using both verniers having a least count of 30". Assuming the instrument to be in perfect adjustment, linear measurements correct to 6 mm per 30 metre tape duly corrected for temperature, slope and sag, the angular error of closure not to exceed (where n is the number of traverse legs) (A) 50" n(B) 30" n(C) 60" n (D) None of these

Description : In precision theodolite traverse if included angles are read twice and the mean reading accepted using both verniers having a least count of 30". Assuming the instrument to be in perfect adjustment, linear measurements correct to 6 mm per ... legs) (A) 50" n (B) 30" n (C) 60" n (D) None of these

Last Answer : (A) 50" n

A column said to be under uniaxial bending, when the eccentricity is [ A ] with respect to one axis only [ B ] with respect to two axes [ C ] zero [ D ] 20 mm

Description : A column said to be under uniaxial bending, when the eccentricity is [ A ] with respect to one axis only [ B ] with respect to two axes [ C ] zero [ D ] 20 mm

Last Answer : [ A ] with respect to one axis only

Prismatic compass is considered more accurate than a surveyor's compass, because (A) It is provided with a better magnetic needle (B) It is provided with a sliding glass in the object vane (C) Its graduations are in whole circle bearings (D) It is provided with a prism to facilitate reading of its graduated circle

Description : Prismatic compass is considered more accurate than a surveyor's compass, because (A) It is provided with a better magnetic needle (B) It is provided with a sliding glass in the object vane ( ... whole circle bearings (D) It is provided with a prism to facilitate reading of its graduated circle

Last Answer : (D) It is provided with a prism to facilitate reading of its graduated circle

Accurate measurement of deflection angles with a transit not properly adjusted may be made by (A) Setting the Vernier A at zero at back station and then plunging the telescope (B) Setting the Vernier A at zero at back station and turning the instrument to the forward station (C) Taking two back sights one with the telescope normal and the other with telescope inverted (D) None of these

Description : Accurate measurement of deflection angles with a transit not properly adjusted may be made by (A) Setting the Vernier A at zero at back station and then plunging the telescope (B) Setting the ... back sights one with the telescope normal and the other with telescope inverted (D) None of these

Last Answer : (C) Taking two back sights one with the telescope normal and the other with telescope inverted

In optical reading instruments (A) The vertical circle is usually continuous from 0° to 359° (B) The readings increase when the telescope is elevated in the face left position (C) The readings decrease when the telescope is elevated in the face right position (D) All the above

Description : In optical reading instruments (A) The vertical circle is usually continuous from 0° to 359° (B) The readings increase when the telescope is elevated in the face left position (C) The readings decrease when the telescope is elevated in the face right position (D) All the above

Last Answer : (D) All the above

Which one of the following statements is not correc t? (a) Parallax error is eliminated when there is no change in the staff reading when eye is moved up and down (b) The objective lens is to be focused towards a white or bright background for clear visibility of cross-hairs (c) Temporary adjustments of the dumpy level are to be performed at every set up (d) The eyepiece need not be adjusted after the first set up when the same surveyor is taking readings

Description : Which one of the following statements is not correc t? (a) Parallax error is eliminated when there is no change in the staff reading when eye is moved up and down (b) The objective lens is ... (d) The eyepiece need not be adjusted after the first set up when the same surveyor is taking readings

Last Answer : (b) The objective lens is to be focused towards a white or bright background for clear visibility of cross-hairs

Which of the following is not a characteristic feature of yield lines? [ A ] Yield lines end at a slab boundary [ B ] Yield lines are of parabolical shape [ C ] Axes of rotation generally lie along the lines of supports [ D ] None of the above.

Description : Which of the following is not a characteristic feature of yield lines? [ A ] Yield lines end at a slab boundary [ B ] Yield lines are of parabolical shape [ C ] Axes of rotation generally lie along the lines of supports [ D ] None of the above.

Last Answer : [ B ] Yield lines are of parabolical shape

A dumpy level was set up at mid-point between pegs A and B, 80 m apart and the staff readings were 1.32 and 1.56. When the level was set up at a point 10 m from A on BA produced, the staff readings obtained at A and B were 1.11 and 1.39. The correct staff reading from this set up at S should be (A) 1.435 (B) 1.345 (C) 1.425 (D) None of these

Description : A dumpy level was set up at mid-point between pegs A and B, 80 m apart and the staff readings were 1.32 and 1.56. When the level was set up at a point 10 m from A on BA produced, the staff readings obtained at A ... this set up at S should be (A) 1.435 (B) 1.345 (C) 1.425 (D) None of these

Last Answer : (B) 1.345

What is Vernier's constant ?

Description : What is Vernier's constant ?

Last Answer : How much smaller a fraction of the vernier scale is than the smallest fraction of the main scale - its quantity is called the vernier constant.

The zero of the graduated circle of a prismatic compass is located at (A) North end (B) East end (C) South end (D) West end

Description : The zero of the graduated circle of a prismatic compass is located at  (A) North end  (B) East end  (C) South end  (D) West end 

Last Answer : (C) South end

In a perfect prismatic compass (A) Magnetic axis and geometric axis of the needle coincide (B) Ends of the needle and pivot are in same vertical and horizontal planes (C) Pivot is vertically over the centre of the graduated circle (D) All the above

Description : In a perfect prismatic compass (A) Magnetic axis and geometric axis of the needle coincide (B) Ends of the needle and pivot are in same vertical and horizontal planes (C) Pivot is vertically over the centre of the graduated circle (D) All the above

Last Answer : (D) All the above

The locus of the moment of inertia about inclined axes to the principal axis, is (A) Straight line (B) Parabola (C) Circle (D) Ellipse

Description : The locus of the moment of inertia about inclined axes to the principal axis, is  (A) Straight line  (B) Parabola  (C) Circle  (D) Ellipse

Last Answer : (D) Ellipse

Most appropriate instrument for measurement of internal and external diameter of a tube is A. vernier callipers B. micrometer screw gauge C. meter rule D. measuring tape

Description : Most appropriate instrument for measurement of internal and external diameter of a tube is A. vernier callipers B. micrometer screw gauge C. meter rule D. measuring tape

Last Answer : vernier callipers

What is the name of instrument used for measuring earthquake intensity? a. Modified Mercalli Scale b. Metrological scale c. Vernier scale d. Barometer

Description : What is the name of instrument used for measuring earthquake intensity? a. Modified Mercalli Scale b. Metrological scale c. Vernier scale d. Barometer

Last Answer : a. Modified Mercalli Scale

Dumpy level is most suitable when (A) The instrument is to be shifted frequently (B) Fly levelling is being done over long distance (C) Many readings are to be taken from a single setting of the instrument (D) All of the above

Description : Dumpy level is most suitable when (A) The instrument is to be shifted frequently (B) Fly levelling is being done over long distance (C) Many readings are to be taken from a single setting of the instrument (D) All of the above

Last Answer : (C) Many readings are to be taken from a single setting of the instrument

Which of the following in theodolite work is imperfect adjustment of the instrument (a) Error due to line of collimation being perpendicular to the horizontal axis (b) Error due to axis not to perpendicular of the vertical axis (c) Error due to imperfect graduation (d) Error due to eccentricity of vernires (e) All of the above*

Description : Which of the following in theodolite work is imperfect adjustment of the instrument (a) Error due to line of collimation being perpendicular to the horizontal axis (b) Error due to axis not to perpendicular ... to imperfect graduation (d) Error due to eccentricity of vernires (e) All of the above*

Last Answer : (e) All of the above*

Consider tile following statements: [IES-1993; 2002; 2006] Radius of friction circle for a journal bearing depends upon 1. Coefficient of friction 2. Radius of the journal 3. Angular speed of rotation of the shaft Which of the statements given above are correct? (a) 1,2 and 3 (b) Only 1 and 2 (c) Only 2 and 3 (d) Only 1 and 3

Description : Consider tile following statements: [IES-1993; 2002; 2006] Radius of friction circle for a journal bearing depends upon 1. Coefficient of friction 2. Radius of the journal 3. Angular speed of rotation of the shaft Which of the ... ) 1,2 and 3 (b) Only 1 and 2 (c) Only 2 and 3 (d) Only 1 and 3

Last Answer : (b) Only 1 and 2

Pick up the correct statement from the following: (A) The tangent screw enables to give small movement under conditions of smooth and positive control (B) Standing on the tripod is the levelling head or trib arch (C) The levelling screws are used to tilt the instrument so that its rotation axis is truly vertical (D) All the above

Description : Pick up the correct statement from the following: (A) The tangent screw enables to give small movement under conditions of smooth and positive control (B) Standing on the tripod is the levelling head ... used to tilt the instrument so that its rotation axis is truly vertical (D) All the above

Last Answer : (D) All the above

All the following processes occur rapidly in the membrane lipid bilayer except (A) Flexing of fatty acyl chains (B) Lateral diffusion of phospholipids (C) Transbilayer diffusion of phopholipids (D) Rotation of phospholipids around their long axes

Description : All the following processes occur rapidly in the membrane lipid bilayer except (A) Flexing of fatty acyl chains (B) Lateral diffusion of phospholipids (C) Transbilayer diffusion of phopholipids (D) Rotation of phospholipids around their long axes

Last Answer : C

All the following processes occur rapidly in the membrane lipid bilayer except (A) Flexing of fatty acyl chains (B) Lateral diffusion of phospholipids (C) Transbilayer diffusion of phospholipids (D) Rotation of phospholipids around their long axes

Description : All the following processes occur rapidly in the membrane lipid bilayer except (A) Flexing of fatty acyl chains (B) Lateral diffusion of phospholipids (C) Transbilayer diffusion of phospholipids (D) Rotation of phospholipids around their long axes

Last Answer : (C) Transbilayer diffusion of phospholipids

Why zero is marked at south end on a graduated circle of prismatic compass?

Description : Why zero is marked at south end on a graduated circle of prismatic compass?

Last Answer : As bearing of any line is measured with respective north direction, while observing north direction, reading should be 00 0'. Therefore when object vane is bisecting north direction, at the same ... get bearings with respective north direction always, zero is marked at south end of magnetic needle.

Which of the following statements regarding the use of a current measuring instrument is correct? A. It must be connected in series with the circuit. B. You should always start with the lowest range until a suitable reading is obtained. C. The indicating needle is deflected from left to right regardless of polarity. D. An external shunt is generally utilized where current is less than 10 amperes.

Description : Which of the following statements regarding the use of a current measuring instrument is correct? A. It must be connected in series with the circuit. B. You should always start with the lowest range ... of polarity. D. An external shunt is generally utilized where current is less than 10 amperes.

Last Answer : Answer: A

Vernier Constant What ?

Last Answer : slide Calipers ( one Of sorts Measurer Instrument ) of Chief Of scale The smallest One Sharing Than Vernier Of scale One Share That's right How much? Small His The amount Vernier Constant Says. Now Chief Of scale The smallest One ... .1 m . Mr. _ Or 0.01 sec . Mr. _ . Hope I do To understand Got it.

The average mean velocity of a stream having depth h, may be obtained by taking the average of the readings of a current meter at a depth of (A) 0.1 h and 0.9 h (B) 0.2 h and 0.8 h (C) 0.3 h and 0.7 h (D) 0.4 h and 0.6 h

Description : The average mean velocity of a stream having depth h, may be obtained by taking the average of the readings of a current meter at a depth of (A) 0.1 h and 0.9 h (B) 0.2 h and 0.8 h (C) 0.3 h and 0.7 h (D) 0.4 h and 0.6 h

Last Answer : Answer: Option B

What was Pierre Vernier's job ?

Description : What was Pierre Vernier's job ?

Last Answer : Pierre Vernier was a mathematician by profession.

Find the equation of the circle which touches the both axes in first quadrant and whose radius is a. -Maths 9th

Description : Find the equation of the circle which touches the both axes in first quadrant and whose radius is a. -Maths 9th

Last Answer : circle of radius a touches both axis in 1st quadrant so its centre will be (a,a). ∴ Required equation ⇒(x−a)2+(y−a)2=a2 ⇒x2+a2−2ax+y2+a2−2ay=a2 ⇒x2+y2−2ax−2ay+2a2−a2=0 ⇒x2−y2−2ax−2ay+a2=0.

Find the equation of the circle which touches the both axes in first quadrant and whose radius is a. -Maths 9th

Description : Find the equation of the circle which touches the both axes in first quadrant and whose radius is a. -Maths 9th

Last Answer : Given that the circle of radius ‘a’ touches both axis. So, its centre is (a, a) So, the equation of required circles is : (x-a)2 + (y-a)2 = a2 ⇒ x2 - 2ax + a2+y2 - 2ay + a2 = a2 ⇒ x2 + y2 - 2ax - 2ay + a2 = 0

Which of the following laminas have same moment of inertia (Ixx = Iyy), when passed through the centroid along x-x and y-y axes? a. Circle b. Semi-circle c. Right angle triangle d. Isosceles triangle

Description : Which of the following laminas have same moment of inertia (Ixx = Iyy), when passed through the centroid along x-x and y-y axes? a. Circle b. Semi-circle c. Right angle triangle d. Isosceles triangle

Last Answer : a. Circle

Moment of inertia acting on a semi-circle about symmetrical axes is given as _______ a. 1.57 r4 b. 0.055 r4 c. 0.392 r4 d. 0.11 r4

Description : Moment of inertia acting on a semi-circle about symmetrical axes is given as _______ a. 1.57 r4 b. 0.055 r4 c. 0.392 r4 d. 0.11 r4

Last Answer : c. 0.392 r4

Pick up the correct statement from the following: (A) An observation or the resulting reading with the level on a levelling staff is called sight (B) A back sight is the first sight taken after setting up the instrument in any position (C) The first sight on each change point is a fore sight (D) All the above

Description : Pick up the correct statement from the following: (A) An observation or the resulting reading with the level on a levelling staff is called sight (B) A back sight is the first sight taken after setting up ... position (C) The first sight on each change point is a fore sight (D) All the above

Last Answer : (D) All the above

Which of the following statements concerning monitoring techniques in the intensive care unit are true? A. Pulmonary artery and pulmonary capillary wedge pressure readings should be made at end inspiration, to minimize ventilatory artifacts. B. Continuous SvO 2 monitoring based on the technique of reflectance spectrophotometry has been shown to be accurate and reliable. C. Direct measurement of gastric intramucosal pH can be provided by gastrointestinal tonometry. D. Hyperlactatemia may be seen in a number of clinical conditions not associated with tissue hypoxia, including liver disease and hypermetabolic states.

Description : Which of the following statements concerning monitoring techniques in the intensive care unit are true? A. Pulmonary artery and pulmonary capillary wedge pressure readings should be made ... clinical conditions not associated with tissue hypoxia, including liver disease and hypermetabolic states.

Last Answer : Answer: BD DISCUSSION: Many different monitoring techniques may be used to assess the adequacy of therapy for shock. The pulmonary artery catheter can provide important hemodynamic and oxygen ... also be seen with liver disease, toxin ingestion, and hypermetabolic states not associated with shock

If lines corresponding to given linear equations are coincident, the solutionof the given equations is: e) Unique solution f) Two solutionsg) Infintely many solutions h) No solution

Description : If lines corresponding to given linear equations are coincident, the solutionof the given equations is: e) Unique solution f) Two solutionsg) Infintely many solutions h) No solution

Last Answer : g) Infintely many solutions

If lines corresponding to given linear equations are coincident, the solutionof the given equations is: a) Unique solution b) Two solutions c) Infintely many solutions d) No solution

Description : If lines corresponding to given linear equations are coincident, the solutionof the given equations is: a) Unique solution b) Two solutions c) Infintely many solutions d) No solution

Last Answer : c) Infintely many solutions

If the equation `3x^(2)+6xy+my^(2)=0` represents a pair of coincident straight lines, then `(3m)/2` is equal to

Description : If the equation `3x^(2)+6xy+my^(2)=0` represents a pair of coincident straight lines, then `(3m)/2` is equal to

Last Answer : If the equation `3x^(2)+6xy+my^(2)=0` represents a pair of coincident straight lines, then `(3m)/2` is equal to

The pair of equation x = 4 and y = 3 graphically represents lines which are e) Parallel f) Intersecting at ( 3,4) g) Coincident h) Intersecting at ( 4,3)

Description : The pair of equation x = 4 and y = 3 graphically represents lines which are e) Parallel f) Intersecting at ( 3,4) g) Coincident h) Intersecting at ( 4,3)

Last Answer : h) Intersecting at ( 4,3)

The pair of equation x = 4 and y = 3 graphically represents lines which are a) Parallel b) Intersecting at ( 3,4) c) Coincident d) Intersecting at ( 4,3)

Description : The pair of equation x = 4 and y = 3 graphically represents lines which are a) Parallel b) Intersecting at ( 3,4) c) Coincident d) Intersecting at ( 4,3)

Last Answer : d) Intersecting at ( 4,3)

Dumpy level is most suitable when (a) The instrument is to be shifted frequently (b) Fly leveling is being done over long distance (c) Many readings are to be taken from a single setting of the instrument* (d) All of the above

Description : Dumpy level is most suitable when (a) The instrument is to be shifted frequently (b) Fly leveling is being done over long distance (c) Many readings are to be taken from a single setting of the instrument* (d) All of the above

Last Answer : (c) Many readings are to be taken from a single setting of the instrument*

All the following statements about ceruloplasmin are correct except (A) It is a copper-containing protein (B) It possesses oxidase activity (C) It is synthesised in intestinal mucosa (D) Its plasma level is decreased inWilson’s disease

Description : All the following statements about ceruloplasmin are correct except (A) It is a copper-containing protein (B) It possesses oxidase activity (C) It is synthesised in intestinal mucosa (D) Its plasma level is decreased inWilson’s disease

Last Answer : Answer : C

The least count of a Vernier scale is (A) Sum of the smallest divisions of main and Vernier scales (B) Value of one division of the primary scale divided by total number of divisions of Vernier scale (C) Value of one division of Vernier scale divided by total number of divisions of primary scale (D) None of these

Description : The least count of a Vernier scale is  (A) Sum of the smallest divisions of main and Vernier scales  (B) Value of one division of the primary scale divided by total number of divisions ... division of Vernier scale divided by total number of divisions of primary scale  (D) None of these 

Last Answer : (B) Value of one division of the primary scale divided by total number of divisions of Vernier  scale 

You have to observe an included angle with better accuracy than what is achievable by a vernier, you will prefer the method of (A) Repetition (B) Reiteration (C) Double observations (D) Exactness

Description : You have to observe an included angle with better accuracy than what is achievable by a vernier,  you will prefer the method of  (A) Repetition  (B) Reiteration  (C) Double observations  (D) Exactness

Last Answer : (A) Repetition 

A transit is oriented by setting its vernier A to read the back azimuth of the preceding line. A back sight on the preceding transit station taken and transit is rotated about its vertical axis. The vernier A reads (A) Azimuth of the forward line (B) Bearing of the forward line (C) Back bearing of the forward line (D) Equal to 360°-azimuth of the forward line

Description : A transit is oriented by setting its vernier A to read the back azimuth of the preceding line. A back sight on the preceding transit station taken and transit is rotated about its vertical axis. The vernier ... (C) Back bearing of the forward line (D) Equal to 360°-azimuth of the forward line

Last Answer : (A) Azimuth of the forward line

In case of a direct vernier scale (A) Graduations increase in opposite direction in which graduations of the main scale increase (B) Smallest division is longer than smallest division of the main scale (C) Graduations increase in the same direction in which graduations of the main scale increase (D) None of these

Description : In case of a direct vernier scale (A) Graduations increase in opposite direction in which graduations of the main scale increase (B) Smallest division is longer than smallest division of the main scale ... in the same direction in which graduations of the main scale increase (D) None of these

Last Answer : C) Graduations increase in the same direction in which graduations of the main scale increase

The main plate of a transit is divided into 1080 equal divisions. 60 divisions of the Vernier coincide exactly with 59 divisions of the main plate. The transit can read angles accurate upto (A) 5" (B) 10" (C) 15" (D) 20"

Description : The main plate of a transit is divided into 1080 equal divisions. 60 divisions of the Vernier coincide exactly with 59 divisions of the main plate. The transit can read angles accurate upto (A) 5" (B) 10" (C) 15" (D) 20"

Last Answer : (D) 20"

If the smallest division of a vernier is longer than the smallest division of its primary scale, the vernier is known as (A) Direct vernier (B) Double vernier (C) Retrograde vernier (D) Simple vernier

Description : If the smallest division of a vernier is longer than the smallest division of its primary scale, the vernier is known as (A) Direct vernier (B) Double vernier (C) Retrograde vernier (D) Simple vernier

Last Answer : (C) Retrograde vernier

Psychic Readings: What To Expect For Your First Reading?

Description : Psychic Readings: What To Expect For Your First Reading?

Last Answer : There is much controversy over whether psychics legitimatelyhave a sixth sense or whether they are just great actors. Whilemany people are curious about psychics, few people have ... ordistant readings. Most people are probably most familiar with palmreadings, astrology readings, horosco

A spring balance A and a beam balance B are used to weigh an object at different points on Earth. It will be observed that (a) The readings of A and B will be different at different points of the Earth. (b) The readings of A will be the same but the readings of B will be different at different places. (c) Both A and B will have the same reading at all points on the Earth. (d) The readings of A will be different but those of B will be the same at different points on the Earth.

Description : A spring balance A and a beam balance B are used to weigh an object at different points on Earth. It will be observed that (a) The readings of A and B will be different at different points of the ... readings of A will be different but those of B will be the same at different points on the Earth.

Last Answer : Ans:(d)

If air gap readings for an electical generating machine have changed significantly from the last reading, you should check _________. A. the bearings B. insulation readings and machine cleanliness C. the prime mover thrust bearing D. the field coil bolts for the proper torque values

Description : If air gap readings for an electical generating machine have changed significantly from the last reading, you should check _________. A. the bearings B. insulation readings and machine cleanliness C. the prime mover thrust bearing D. the field coil bolts for the proper torque values

Last Answer : Answer: A

When you check the specific gravity of the battery electrolyte with a hydrometer, it should be kept in mind that ____________. A. the battery is fully charged when the indicator floats low in the electrolyte B. any water that has been previously added to the cells will dilute the solution and give a false reading C. a hydrometer reading is inaccurate if taken immediately after water is added to the cell D. temperature has no effect on hydrometer readings

Description : When you check the specific gravity of the battery electrolyte with a hydrometer, it should be kept in mind that ____________. A. the battery is fully charged when the indicator floats low in ... taken immediately after water is added to the cell D. temperature has no effect on hydrometer readings

Last Answer : Answer: C

A low voltage source is being used for testing armature coils. A coil short circuit will be indicated by a _______. A. high voltage reading, while the other coil readings will have an equal or lower value B. low or zero voltage reading, while the other coils will have higher readings C. fluctuating voltmeter reading, while the other coil readings are steady D. steady voltmeter reading, while the other coil readings are fluctuating

Description : A low voltage source is being used for testing armature coils. A coil short circuit will be indicated by a _______. A. high voltage reading, while the other coil readings will have an ... the other coil readings are steady D. steady voltmeter reading, while the other coil readings are fluctuating

Last Answer : Answer: B