Theoretical volume of oxygen required for complete combustion of 1Nm3 of acetylene, in oxy-acetylene welding is __________ Nm3. (A) 0.5 (B) 1 (C) 1/3 (D) 2.5

Theoretical volume of oxygen required for complete combustion of
1Nm3 of acetylene, in oxy-acetylene welding is __________ Nm3.
(A) 0.5
(B) 1
(C) 1/3
(D) 2.5
by

1 Answer

Answer :

Option D
by

Related questions

99.5% purity oxygen is used in (A) Cutting and welding by oxy-acetylene flame (B) Hospitals for medicinal purposes (C) Gas masks and artificial breathing apparatus (D) All (A), (B), and (C)

Description : 99.5% purity oxygen is used in (A) Cutting and welding by oxy-acetylene flame (B) Hospitals for medicinal purposes (C) Gas masks and artificial breathing apparatus (D) All (A), (B), and (C)

Last Answer : (D) All (A), (B), and (C)

Oxygen required for theoretically complete combustion of 1 Nm3 methane is __________ Nm3 . (A) 2 (B) 4 (C) 6 (D) 1

Description : Oxygen required for theoretically complete combustion of 1 Nm3 methane is __________ Nm3 . (A) 2 (B) 4 (C) 6 (D) 1

Last Answer : (A) 2

Chromium molybdenum steel cannot be welded using __________ welding. (A) Thermit (B) Electrical resistance (C) Oxy-acetylene (D) Any of these

Description : Chromium molybdenum steel cannot be welded using __________ welding. (A) Thermit (B) Electrical resistance (C) Oxy-acetylene (D) Any of these

Last Answer : Option B

Describe in brief the equipments required for oxy-acetylene welding.

Description : Describe in brief the equipments required for oxy-acetylene welding.

Last Answer : The following equipments are required for oxy-acetylene welding. 1. Welding torch or Blowpipe: It is the tool for mixing two gases in the desired volumes and burning the mixture at the end of a ... particularly when the oxides of the base metal have a higher melting point than the metal itself.

Stainless steel is welded using (A) Oxy-acetylene flame (B) Oxy-hydrogen flame (C) Arc welding (D) Inert gas arc welding

Description : Stainless steel is welded using (A) Oxy-acetylene flame (B) Oxy-hydrogen flame (C) Arc welding (D) Inert gas arc welding

Last Answer : (D) Inert gas arc welding

About __________ Nm3 of air will be required for the complete combustion of 2Nm3 of CO. (A) 2 (B) 3 (C) 4 (D) 5

Description : About __________ Nm3 of air will be required for the complete combustion of 2Nm3 of CO. (A) 2 (B) 3 (C) 4 (D) 5

Last Answer : (D) 5

Pick out the wrong statement. (A) The mass diffusivity, the thermal diffusivity and the eddy momentum diffusivity are the same for NSc = NPr= 1 (B) 1 Nm3 of dry air is lighter than 1Nm3 of humid air (C) The Lewis number of a mixture is unity, when the thermal diffusivity is equal to the mass diffusivity

Description : Pick out the wrong statement. (A) The mass diffusivity, the thermal diffusivity and the eddy momentum diffusivity are the same for NSc = NPr= 1 (B) 1 Nm3 of dry air is lighter ... ) The Lewis number of a mixture is unity, when the thermal diffusivity is equal to the mass diffusivity

Last Answer : (B) 1 Nm3 of dry air is lighter than 1Nm3 of humid air

List types of welding flames used in Oxy-acetylene welding. Write their characteristics and applications.

Description : List types of welding flames used in Oxy-acetylene welding. Write their characteristics and applications.

Last Answer : Types of Flames: Characteristics Applications. 1)Neutral Flame: When oxygen and acetylene are supplied to the torch in nearly equal volumes, a neutral flame is produced. It has two ... cone of whitish colour. 3) Bluish outer cone High Carbon Steel, non - ferrous alloys,

Which of the following will generate maximum volume of product of complete combustion (Nm3 /Nm3 of fuel)? (A) Carburetted water gas (B) Blast furnace gas(C) Natural gas(D) Producers' gas

Description : Which of the following will generate maximum volume of product of complete combustion (Nm3 /Nm3 of fuel)? (A) Carburetted water gas (B) Blast furnace gas (C) Natural gas (D) Producers' gas

Last Answer : (C) Natural gas

For which pair of the fuel gases, calorific value (C.V.) of one fuel is almost double that of the other on volume basis (i.e., kcal/Nm3 ), while the C.V. is same on weight basis (i.e., kcal/kg)? (A) Propane and acetylene (B) Propane and LPG (C) Sewage gas and gobar gas (D) B.F. gas and coke oven gas

Description : For which pair of the fuel gases, calorific value (C.V.) of one fuel is almost double that of the other on volume basis (i.e., kcal/Nm3 ), while the C.V. is same on weight basis (i.e., kcal/kg)? (A) Propane and acetylene (B) Propane and LPG (C) Sewage gas and gobar gas (D) B.F. gas and coke oven gas

Last Answer : (A) Propane and acetylene

For which pair of the fuel gases, calorific value (C.V.) of one fuel is almost double that of the other on volume basis (i.e., kcal/Nm3) while the C.V. is same on weight basis (i.e., kcal/kg)? (A) Propane and acetylene (B) Propane and LPG (C) Sewage gas and gobar gas (D) B.F gas and coke oven gas

Description : For which pair of the fuel gases, calorific value (C.V.) of one fuel is almost double that of the other on volume basis (i.e., kcal/Nm3) while the C.V. is same on weight basis (i.e., kcal/kg)? (A ... and acetylene (B) Propane and LPG (C) Sewage gas and gobar gas (D) B.F gas and coke oven gas

Last Answer : D) B.F gas and coke oven gas

Stoichiometric combustion of 12 kg of carbon requires __________ of oxygen. (A) 1kg mole(B) 22.4 Nm3(C) 32 kg(D) All (A), (B) and (C)

Description : Stoichiometric combustion of 12 kg of carbon requires __________ of oxygen. (A) 1kg mole (B) 22.4 Nm3 (C) 32 kg (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

While the oxy-acetylene flame produces a temperature of 3200°C, the temperature produced by oxy-hydrogen flame is about __________ °C. (A) 1800 (B) 2000 (C) 2400 (D) 3000

Description : While the oxy-acetylene flame produces a temperature of 3200°C, the temperature produced by oxy-hydrogen flame is about __________ °C. (A) 1800 (B) 2000 (C) 2400 (D) 3000

Last Answer : (B) 2000

Metal cutting by oxy-acetylene flame is accomplished by the __________ of the metal. (A) Burning (B) Intensive oxidation (C) Evaporation (D) None of these

Description : Metal cutting by oxy-acetylene flame is accomplished by the __________ of the metal. (A) Burning (B) Intensive oxidation (C) Evaporation (D) None of these

Last Answer : Option B

Pick out the wrong statement. (A) Theoretical flame temperature is the temperature attained by the products of combustion, when the fuel is burned without loss or gain of heat (B) Burning the fuel with theoretically required amount of pure oxygen results in attainment of maximum adiabatic flame temperature (C) Burning the fuel with excess pure oxygen results in maximum theoretical flame temperature (D) Adiabatic flame temperatures of actual combustions are always less than the maximum values

Description : Pick out the wrong statement. (A) Theoretical flame temperature is the temperature attained by the products of combustion, when the fuel is burned without loss or gain of heat (B) ... flame temperature (D) Adiabatic flame temperatures of actual combustions are always less than the maximum values

Last Answer : (C) Burning the fuel with excess pure oxygen results in maximum theoretical flame temperature

The air requirement of a petrol engine during starting compared to theoretical air required for complete combustion is a. more b. less c. same d. may be more or less depending on engine capacity

Description : The air requirement of a petrol engine during starting compared to theoretical air required for complete combustion is a. more b. less c. same d. may be more or less depending on engine capacity

Last Answer : ANSWER b. less

Flue gas obtained on complete combustion of pure acetylene (a hydrocarbon fuel) will contain (A) CO (B) CO2 (C) H2O (D) Both (B) & (C)

Description : Flue gas obtained on complete combustion of pure acetylene (a hydrocarbon fuel) will contain (A) CO (B) CO2 (C) H2O (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

The temperature of oxy-acetylene flame is around (1) 2800°C (2) 3200°C (3) 4000°C (4) 1500°C

Description : The temperature of oxy-acetylene flame is around (1) 2800°C (2) 3200°C (3) 4000°C (4) 1500°C

Last Answer : 3200°C

Air/fuel ratio on molar (volume) basis for combustion of methane with theoretical quantity of air with be (A) 9.5 : 1 (B) 12.5 : 1 (C) 15.5 : 1 (D) 18.5 : 1

Description : Air/fuel ratio on molar (volume) basis for combustion of methane with theoretical quantity of air with be (A) 9.5 : 1 (B) 12.5 : 1 (C) 15.5 : 1 (D) 18.5 : 1

Last Answer : (A) 9.5 : 1

In gas welding which of the following is generally used? a) Oxygen-Hydrogen b) Oxygen-Acetylene c) Oxygen-Hydrogen or Oxygen-Acetylene d) None of the mentioned

Description : In gas welding which of the following is generally used? a) Oxygen-Hydrogen b) Oxygen-Acetylene c) Oxygen-Hydrogen or Oxygen-Acetylene d) None of the mentioned

Last Answer : c) Oxygen-Hydrogen or Oxygen-Acetylene

In practical operation of any furnace, zero oxygen percentage or theoretical CO2 percentage in flue gas is rarely achieved, because of (A) Use of non-preheated combustion air (B) Use of pulverised solid fuels (C) Imperfect mixing of fuel & air and infiltration of air (D) Use of excessive positive draft in the furnace

Description : In practical operation of any furnace, zero oxygen percentage or theoretical CO2 percentage in flue gas is rarely achieved, because of (A) Use of non-preheated combustion air (B) Use of pulverised solid ... of fuel & air and infiltration of air (D) Use of excessive positive draft in the furnace

Last Answer : (C) Imperfect mixing of fuel & air and infiltration of air

The air requirement of a petrol engine during starting compared to the theoretical air requirement for complete combustion is A. more B.unpredictable C. same D. less

Description : The air requirement of a petrol engine during starting compared to the theoretical air requirement for complete combustion is A. more B.unpredictable C. same D. less

Last Answer : ANSWER : D

Which of the following has the highest theoretical flame temperature? (A) Blast furnace gas (B) Hydrogen (C) Acetylene (D) Coke oven gas

Description : Which of the following has the highest theoretical flame temperature? (A) Blast furnace gas (B) Hydrogen (C) Acetylene (D) Coke oven gas

Last Answer : (C) Acetylene

Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point (C) Each ton of petroleum oil on distillation produces about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Description : Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches ... about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Last Answer : (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point

Which of the following fuel gases will require maximum amount of air for combustion of 1 Nm3 gas? (A) Blast furnace gas (B) Natural gas (C) Producer gas (D) Water gas

Description : Which of the following fuel gases will require maximum amount of air for combustion of 1 Nm3 gas? (A) Blast furnace gas (B) Natural gas (C) Producer gas (D) Water gas

Last Answer : (B) Natural gas

Which of the following uses a flat characteristic? a) MAG (GMAW) b) Oxy-fuel gas welding c) Resistance spot welding d) SAW using greater than 1000 amps

Description : Which of the following uses a flat characteristic? a) MAG (GMAW) b) Oxy-fuel gas welding c) Resistance spot welding d) SAW using greater than 1000 amps

Last Answer : a) MAG (GMAW)

At `25^(@)` C for complete combustion of 5 mol propane `(C_(3)H_(8))` . The required volume of `O_(2)` at STP will be .

Description : At `25^(@)` C for complete combustion of 5 mol propane `(C_(3)H_(8))` . The required volume of `O_(2)` at STP will be .

Last Answer : At `25^(@)` C for complete combustion of 5 mol propane `(C_(3)H_(8))` . The required volume of `O_(2)` at ... . A. 560 L B. 560 mL C. 360 L D. 360 mL

At STP , for complete combustion of 3 g `C_(2)H_(6)` the required volume of `O_(2)` will be -

Description : At STP , for complete combustion of 3 g `C_(2)H_(6)` the required volume of `O_(2)` will be -

Last Answer : At STP , for complete combustion of 3 g `C_(2)H_(6)` the required volume of `O_(2)` will be - A. 78. 4 L B. 7. 84 L C. 2. 78 L D. 6. 23 L

'Utilities' in a chemical process plant includes compressed air, steam, water, electrical power, oxygen, acetylene, fuel gases etc. Utility costs for ordinary chemical process plants ranges roughly from __________ percent of the total product cost. (A) 1 to 5 (B) 10 to 20 (C) 25 to 35 (D) 35 to 45

Description : 'Utilities' in a chemical process plant includes compressed air, steam, water, electrical power, oxygen, acetylene, fuel gases etc. Utility costs for ordinary chemical process plants ranges roughly from __________ percent of the total product ... 1 to 5 (B) 10 to 20 (C) 25 to 35 (D) 35 to 45

Last Answer : (B) 10 to 20

Pick out the wrong statement. (A) Strongly caking coal should not be used in the Lurgi gasifier (B) Acetylene gas cannot be used for illumination purpose (C) Water gas is called blue gas because of the color of the flame, when it is burnt (D) Gaseous fuels require less percentage of excess air for combustion as compared to liquid fuels

Description : Pick out the wrong statement. (A) Strongly caking coal should not be used in the Lurgi gasifier (B) Acetylene gas cannot be used for illumination purpose (C) Water gas is called blue gas ... is burnt (D) Gaseous fuels require less percentage of excess air for combustion as compared to liquid fuels

Last Answer : (B) Acetylene gas cannot be used for illumination purpose

Acetylene is commonly used in a gas welding torch. Give the molecular formula for acetylene.

Description : Acetylene is commonly used in a gas welding torch. Give the molecular formula for acetylene. 

Last Answer : ANSWER: C2H2 or HC2H or H2C2

Air/fuel ratio by weight for combustion of methane with theoretical quantity of air will be about (A) 9 : 1 (B) 17 : 1 (C) 23 : 1 (D) 29 : 1

Description : Air/fuel ratio by weight for combustion of methane with theoretical quantity of air will be about (A) 9 : 1 (B) 17 : 1 (C) 23 : 1 (D) 29 : 1

Last Answer : (B) 17 : 1

Raw materials required for the manufacture of __________ is acetylene and hydrochloric acid. (A) Phthalic anhydride (B) Vinyl chloride (C) Maleic anhydride (D) Dacron

Description : Raw materials required for the manufacture of __________ is acetylene and hydrochloric acid. (A) Phthalic anhydride (B) Vinyl chloride (C) Maleic anhydride (D) Dacron

Last Answer : (B) Vinyl chloride

One kg of carbon for theoretically complete combustion requires __________ kg of air. (A) 11.5 (B) 0.5 (C) 23 (D) 12

Description : One kg of carbon for theoretically complete combustion requires __________ kg of air. (A) 11.5 (B) 0.5 (C) 23 (D) 12

Last Answer : (A) 11.5

Dry air requirement for burning 1 Nm3 of CO to CO2 may be around __________ Nm3 . (A) 2.4 (B) 1.75 (C) 0.87 (D) 11.4

Description : Dry air requirement for burning 1 Nm3 of CO to CO2 may be around __________ Nm3 . (A) 2.4 (B) 1.75 (C) 0.87 (D) 11.4

Last Answer : (A) 2.4

An organic compound contain 69% carbon and 4.8% hydrogen, the remaining being oxygen. Calculate the masses of carbon dioxide and water produced when 0.20g of this substance is subjected to complete combustion.

Description : An organic compound contain 69% carbon and 4.8% hydrogen, the remaining being oxygen. Calculate the masses of carbon dioxide and water produced when 0.20g of this substance is subjected to complete combustion.

Last Answer : Calculation of mass of CO2 produced: Mass of compound =0.20g %C =12 x C 69=12*mass of CO2 formed*100/44*0.2 Mass of CO2 formed =69*44*.2/12*100 = 0.506g Similarly, % H =2* mass of H2Oformed*100/18* ... compound 4.8=2* mass of H2Oformed*100/18* 0.2 Mass of H2Oformed =4.8*18*0.2/2*100 =0.0864g

Pick out the wrong statement. (A) High concentration of oxygen in flue gas means high stack loss (B) Gaseous fuels require the least % excess air for complete combustion (C) The ratio of fixed carbon to volatile matter percentage in coal is called its 'fuel ratio' (D) Calorific value of natural gas is more than that of LPG

Description : Pick out the wrong statement. (A) High concentration of oxygen in flue gas means high stack loss (B) Gaseous fuels require the least % excess air for complete combustion (C) The ratio of fixed carbon to ... coal is called its 'fuel ratio' (D) Calorific value of natural gas is more than that of LPG

Last Answer : (D) Calorific value of natural gas is more than that of LPG

During combustion of a gaseous fuel, the presence of a non-luminous flame is an indication of the (A) Incomplete combustion (B) Complete combustion (C) High oxygen in flue gas (D) None of these

Description : During combustion of a gaseous fuel, the presence of a non-luminous flame is an indication of the (A) Incomplete combustion (B) Complete combustion (C) High oxygen in flue gas (D) None of these

Last Answer : (B) Complete combustion

A carbonaceous fuel (containing no H2 or hydrocarbons) is burnt and the resulting flue gas contains 21% CO2 . It means that (A) 21% excess air has been used for combustion (B) 21% excess oxygen has been used for combustion (C) Complete combustion of fuel has taken place (D) No excess air has been used for combustion

Description : A carbonaceous fuel (containing no H2 or hydrocarbons) is burnt and the resulting flue gas contains 21% CO2 . It means that (A) 21% excess air has been used for combustion (B) 21% excess oxygen has ... (C) Complete combustion of fuel has taken place (D) No excess air has been used for combustion

Last Answer : (C) Complete combustion of fuel has taken place

2, 3-Biphosphoglycerate in high concentrations, combines with hemoglobin, causes (A) Displacement of the oxyhemoglobin dissociation curve to the left (B) Displacement of the oxyhemoglobin dissociation curve to the right (C) No change in oxy hemoglobin dissociation curve (D) Increased affinity for oxygen

Description : 2, 3-Biphosphoglycerate in high concentrations, combines with hemoglobin, causes (A) Displacement of the oxyhemoglobin dissociation curve to the left (B) Displacement of the oxyhemoglobin dissociation curve ... (C) No change in oxy hemoglobin dissociation curve (D) Increased affinity for oxygen

Last Answer : Answer : B

Ammonia content in raw coke oven gas is about __________ gm/Nm3 . (A) 1 (B) 5 (C) 50 (D) 100

Description : Ammonia content in raw coke oven gas is about __________ gm/Nm3 . (A) 1 (B) 5 (C) 50 (D) 100

Last Answer : (B) 5

Calorific value of gobar gas (containing CH4 = 60% , H2 = 10% ; CO2 = 30%) may be about __________ Kcal/Nm3 . (A) 1,800 (B) 3,200 (C) 5,400 (D) 10,200

Description : Calorific value of gobar gas (containing CH4 = 60% , H2 = 10% ; CO2 = 30%) may be about __________ Kcal/Nm3 . (A) 1,800 (B) 3,200 (C) 5,400 (D) 10,200

Last Answer : (C) 5,400

Combustion of fuel in a furnace with oxygen enriched air results in higher (A) Flue gas volume (B) Flame temperature (C) Fuel consumption (D) Stack loss

Description : Combustion of fuel in a furnace with oxygen enriched air results in higher (A) Flue gas volume (B) Flame temperature (C) Fuel consumption (D) Stack loss

Last Answer : (B) Flame temperature

Yield of coke oven gas in low temperature carbonisation of coal is about __________ Nm3 /ton of dry coal. (A) 60 (B) 160 (C) 500 (D) 750

Description : Yield of coke oven gas in low temperature carbonisation of coal is about __________ Nm3 /ton of dry coal. (A) 60 (B) 160 (C) 500 (D) 750

Last Answer : (B) 160

C.V. (kcal/Nm3 ) of gaseous fuels __________ with increase in molecular weight. (A) Decreases (B) Increases (C) Remain constant (D) May increase or decrease, depends on combustibles

Description : C.V. (kcal/Nm3 ) of gaseous fuels __________ with increase in molecular weight. (A) Decreases (B) Increases (C) Remain constant (D) May increase or decrease, depends on combustibles

Last Answer : (D) May increase or decrease, depends on combustibles

Calorific value of wood gas is about __________ kcal/Nm3 . (A) 1500 (B) 3300 (C) 5400 (D) 8500

Description : Calorific value of wood gas is about __________ kcal/Nm3 . (A) 1500 (B) 3300 (C) 5400 (D) 8500

Last Answer : (B) 3300

Dust content in raw blast furnace gas is about __________ gm/Nm3 ; hence it is cleaned to the dust level of about < 10 mg /Nm3 before use. (A) 15-30 (B) 1-2 (C) 70-100 (D) 150-200

Description : Dust content in raw blast furnace gas is about __________ gm/Nm3 ; hence it is cleaned to the dust level of about < 10 mg /Nm3 before use. (A) 15-30 (B) 1-2 (C) 70-100 (D) 150-200

Last Answer : (A) 15-30

The calorific value of natural gas is about __________ kcal/Nm3 . (A) 10,000 (B) 2,500 (C) 25,000 (D) 35,000

Description : The calorific value of natural gas is about __________ kcal/Nm3 . (A) 10,000 (B) 2,500 (C) 25,000 (D) 35,000

Last Answer : (A) 10,000

Quantity of coke oven gas produced by high temperature carbonisation of one ton of dry coal may be around __________ Nm3 . (A) 30 (B) 300 (C) 3,000 (D) 30,000

Description : Quantity of coke oven gas produced by high temperature carbonisation of one ton of dry coal may be around __________ Nm3 . (A) 30 (B) 300 (C) 3,000 (D) 30,000

Last Answer : (B) 300

Yield of blast furnace gas is about __________ Nm3 /ton of pig iron. (A) 300 (B) 2000 (C) 5000 (D) 10000

Description : Yield of blast furnace gas is about __________ Nm3 /ton of pig iron. (A) 300 (B) 2000 (C) 5000 (D) 10000

Last Answer : (B) 2000