Description : The truss element can resist only a.surface force b.axial force c.point load d.none of the above
Last Answer : b.axial force
Description : Example for one – Dimensional element is . a.triangular element b.brick element c.truss element d.axisymmetric element
Last Answer : c.truss element
Description : In truss analysis, the reactions can be found by using the equation . a.R=KQ+F b.R=KQ-F c.R=K+QF d.R=K-QF
Last Answer : b.R=KQ-F
Description : For truss analysis, which type of elements is used? a.Triangle b.Parallelogram c.Rectangle d.Bar
Last Answer : d.Bar
Description : The direction of projection for the range of a projectile to be maximum on an inclined plane having angle of inclination 30? to the horizontal, whould be a.45? with horizontal b.30? with vertical c.30? with horizontal d.60? with inclined plane e.45? with inclined plane
Last Answer : b. 30? with vertical
Description : A cylindrical specimen of saturated soil failed under an axial vertical stress of 100kN/m² when it was laterally unconfmed. The failure plane was inclined to the horizontal plane at an angle of 45°. The values of cohesion and angle of ... N/mm² and 0° (C) 0.2 N/mm² and 0° (D) 0.05 N/mm² and 45°
Last Answer : Answer: Option B
Description : A metering mechanism that does not required cut-off device is: A. Inclined plate B. Vertical plate C. Horizontal plate D. All are correct
Last Answer : All are correct
Description : For measuring flow by a Venturimeter, if should be installed in (A) Vertical line (B) Horizontal line (C) Inclined line with flow downward (D) In any direction and in any location
Last Answer : Answer: Option D
Description : Which machine's spindle is used to horizontal work? a.UMC b.VMC c.HMC d.DNC
Last Answer : c.HMC
Description : A CNC Lathe is usually a machine tool with Z axes is….. a.Line Joining origin and vertical movement b.Line perpendicular to Y axis c.Both A & B d.Line Joining Chuck centre & tail stock centre
Last Answer : d.Line Joining Chuck centre & tail stock centre
Description : In a CNC program block, N02 GO2 G91 X40 Z40††, GO2 and G91 refer to a.circular interpolation in counter clockwise direction and incremental dimension b.circular ... in clockwise direction and incremental dimension d.circular interpolation in clockwise direction and absolute dimension
Last Answer : c.circular interpolation in clockwise direction and incremental dimension
Description : The unit vector in the direction of the line is defined as . a.tangent vector+length of the line b.tangent vector-length of the line c.tangent vector/length of the line d.length of the line/tangent vector
Last Answer : c.tangent vector/length of the line
Description : A line AB with end points A (2, 1) & B (7, 6) is to be moved by 3 units in x-direction & 4units in y-direction. Calculate new coordinates of points B. a.(10, 2) b.(2, 10) c.(10, 10) d.(10, 5)
Last Answer : c.(10, 10)
Description : If a ‘3 x 3’ matrix shears in Y direction, how many elements of it are ‘0’? a.2 b.3 c.6 d.5
Last Answer : d.5
Description : If a ‘3 x 3’ matrix shears in X direction, how many elements of it are ‘1’? a.2 b.3 c.6 d.5
Last Answer : b.3
Description : A line AB with end point A (2,3) & B (7,8) is to be rotated about origin by 300 inclockwise direction. Determine the coordinates of end points S of rotated line. a.(3.232, 2.598) b.(5.232, 3.598) c.(3.232, 1.298) d.(3.232, 1.598)
Last Answer : d.(3.232, 1.598)
Description : Positive values for the rotation angle θ defines a.Counter clockwise rotations about the end points b.Counter clockwise translation about the pivot point c.Counter clockwise rotations about the pivot point d.Negative direction
Last Answer : c.Counter clockwise rotations about the pivot point
Description : A truss element a.107 dynes b.resists lateral forces c.is a two-force body d.is a three force body e.resist forces in compression only
Last Answer : c. is a two-force body
Description : From which of the following is not the main element of Flexible manufacturing system a.Work handling system b.Material handling system c.Tool handling system d.Main frame computer
Last Answer : a.Work handling system
Description : How many nodes are there in a tetrahedron with curved sides element? a.6 b.8 c.10 d.12
Last Answer : c.10
Description : How many nodes are there in a hexahedron element? a.4 b.6 c.8 d.10
Last Answer : c.8
Description : How many nodes are there in a tetrahedron element? a.3 b.4 c.5 d.6
Last Answer : b.4
Description : The actual thickness of plane strain element is . a.very large b.very small c.assumed by software d.any of the above
Last Answer : a.very large
Description : The applications of the Finite Element Method in two-dimensional analyses are . a.stretching of plates b.gravity of dams c.axisymmetric shells d.all of the above
Last Answer : c.axisymmetric shells
Description : is defined as the ratio of the largest dimension of theelement to the smallest dimension. a.Element depth ratio b.Mode shape ratio c.Aspect ratio d.None of the above
Last Answer : c.Aspect ratio
Description : The finite element methods can be applied in ---------areas. a.thermal b.soil and rock mechanics c.vibration d.all of the above
Last Answer : d.all of the above
Description : is/are the phase/s of finite element method a.Pre-processing b.Solution c.Post Processing d.None
Last Answer : c.Post Processing
Description : Axis-Symmetric element is Element a.1D b.2D c.3D d.4D
Last Answer : b.2D
Description : From below, choose the condition for the axisymmetric element. a.Symmetric about axis b.Boundary conditions are symmetric about an axis c.Loading conditions are symmetric about an axis d.All the above
Last Answer : d.All the above
Description : How many nodes are there in a 3-D brick element? a.3 b.6 c.8 d.9
Description : The determinant of an element stiffness matrix is always a.3 b.2 c.1 d.
Last Answer : d.0
Description : To find the nodal displacements in all parts of the element, are used. a.shape function b.node function c.element function d.coordinate function
Last Answer : a.shape function
Description : Example of 2-D Element is . a.bar b.triangle c.hexahedron d.tetrahedron
Last Answer : b.triangle
Description : Finite element analysis deals with . a.approximate numerical solution b.non-boundary value problems c.Laplace equations d.All of the above
Last Answer : a.approximate numerical solution
Description : The numbers of node for 1 D element are a.1 b.2 c.3 d.
Last Answer : b.2
Description : The finite element method is mostly used in the field of a.structural mechanics b.classical mechanics c.applied mechanics d.engineering mechanics
Last Answer : d.engineering mechanics
Description : Number of displacement polynomials used for an element depends on . a.nature of element b.type of an element c.degrees of freedom d.nodes
Last Answer : c.degrees of freedom
Description : A triangular plane stress element has how many degrees of freedom? a.3 b.4 c.5 d.6
Last Answer : d.6
Description : From the following, which type of element is not two dimensional? a.Tetrahedron b.Quadrilateral c.Parallelogram d.Rectangle
Last Answer : a.Tetrahedron
Description : What is the full form of FEA a.Fracture Element Analysis b.Finite Element Analysis c.Future Electronic Analysis d.None of the above
Last Answer : b.Finite Element Analysis
Description : Rotation is simply---------object w.r.t origin or centre point. a.Turn b.Shift c.Compression d.Drag element
Last Answer : a.Turn
Description : In the triaxial compression test, the application of additional axial stress (i.e. deviator stress) on the soil specimen produces shear stress on (A) Horizontal plane only (B) Vertical plane only (C) Both horizontal and vertical planes (D) All planes except horizontal and vertical planes
Last Answer : (D) All planes except horizontal and vertical planes
Description : The work done in sliding a block of weight of 50 kg up a plane inclined at an angle of 30? to the horizontal so that the block is lifted through 1 m ( a.More than 50 kgm b.50 kgm c.Less than 5 kgm d.15 kgm only e.None of the above
Last Answer : a. More than 50 kgm
Description : If the plane table is not horizontal in a direction at right angles to the alidade, the line of sight is parallel to the fiducial edge only for (A) Horizontal sights (B) Inclined sights upward (C) Inclined sight downward (D) None of these
Last Answer : (A) Horizontal sights
Description : In psychrometric chart, specific humidity lines are: A. vertical B. horizontal C. inclined D. curved lines
Last Answer : ANSWER : B
Description : Evaporator tubes are generally (A) Horizontal (B) Vertical (C) Inclined (D) Random
Last Answer : (B) Vertical
Description : Which form of E-marketplace brings together buyers and sellers form the same industry? a) Horizontal b) Vertical c) Integrated d) Inclined
Last Answer : b) Vertical
Description : Which form of e-marketplace brings together buyers and sellers from the same industry? a. horizontal b. Vertical c. Integrated d. Inclined
Last Answer : a. horizontal
Description : Which form of e-marketplace brings together buyers and sellers from the same industry? a. horizontal b. Vertical c.Integrated d.Inclined
Description : In non-cohesive soil in passive state of plastic equilibrium (A) Major principal stress is horizontal (B) Minor principal stress is vertical (C) Major principal stress is vertical (D) Minor and major principal stresses are equally inclined to the horizontal
Last Answer : (B) Minor principal stress is vertical