A circular slab subjected to external loading, deflects to form a (A) Semi-hemisphere (B) Ellipsoid (C) Paraboloid (D) None of these

A circular slab subjected to external loading, deflects to form a
(A) Semi-hemisphere
(B) Ellipsoid
(C) Paraboloid
(D) None of these
by

1 Answer

Answer :

Answer: Option C
by

Related questions

What reflecting surface forms a geometrically perfect image of a point source located at infinity (such as that approximated by a star)? w) Paraboloid x) Ellipsoid y) spherical z) Hyperboloid

Description : What reflecting surface forms a geometrically perfect image of a point source located at infinity (such as that approximated by a star)? w) Paraboloid x) Ellipsoid y) spherical z) Hyperboloid

Last Answer : ANSWER: W -- PARABOLOID

A simply supported beam deflects by 5 mm when it is subjected to a concentrated load of 10 kN at its centre. What will be deflection in a 1/10 model of the beam if the model is subjected to a 1 kN load at its centre? (A) 5 mm (B) 0.5 mm (C) 0.05 mm (D) 0.005 mm

Description : A simply supported beam deflects by 5 mm when it is subjected to a concentrated load of 10 kN at its centre. What will be deflection in a 1/10 model of the beam if the model is subjected to a 1 kN load at its centre? (A) 5 mm (B) 0.5 mm (C) 0.05 mm (D) 0.005 mm

Last Answer : (A) 5 mm

A doubly reinforced section is used (a) When the members are subjected to alternate external loads and the bending moment in the sections reverses. (b) When the member are subjected to loading eccentric in either side of the axis. (c) When the members are subjected to accidental lateral loads . (d) All of the above

Description : A doubly reinforced section is used (a) When the members are subjected to alternate external loads and the bending moment in the sections reverses. (b) When the member are subjected to loading eccentric in ... . (c) When the members are subjected to accidental lateral loads . (d) All of the above

Last Answer : (d) All of the above

In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder (C) Velocity profile varies hyperbolically and the shear stress remains constant over the cross-section (D) Average flow occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)

Description : In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a ... occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)

Last Answer : (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder

A storage tank consists of a circular cylinder with a hemisphere adjoined on either end. If the external diameter of the cylinder be 1.4 m and its length be 8 m, find the cost of painting it on the outside at the rate of Rs. 10 per m -Maths 9th

Description : A storage tank consists of a circular cylinder with a hemisphere adjoined on either end. If the external diameter of the cylinder be 1.4 m and its length be 8 m, find the cost of painting it on the outside at the rate of Rs. 10 per m -Maths 9th

Last Answer : Answer We have, r=0.7m, h=8m ∴ Total surface area = 2πr2+2πrh=2πr(r+h)=2×722​×0.7×8.7m2 Required cost = Rs. {2×722​×0.7×8.7×10}=Rs.382.80

In case of an eccentric loading on a bracket subjected to moment M, the tangential force developed in any rivet, at right angles to its radius vector r is (A) Mr/ r² (B) r²/Mr(C) Mr²/ r² (D) Mr/ r²

Description : In case of an eccentric loading on a bracket subjected to moment M, the tangential force  developed in any rivet, at right angles to its radius vector r is  (A) Mr/ r²  (B) r²/Mr (C) Mr²/ r²  (D) Mr/ r² 

Last Answer : (A) Mr/ r² 

Negative yield line form i. Near the supports in the case of slabs fixed or continuous at the edge. ii. At mid span in the case of slabs fixed. iii.At mid span for simply supported circular slab [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Description : Negative yield line form i. Near the supports in the case of slabs fixed or continuous at the edge. ii. At mid span in the case of slabs fixed. iii.At mid span for simply supported circular slab [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Last Answer : [ A ] i

When a cylindrical vessel containing liquid is resolved, the surface of the liquid takes the shape of (A) A triangle (B) A paraboloid (C) An ellipse (D) None of these

Description : When a cylindrical vessel containing liquid is resolved, the surface of the liquid takes the shape of (A) A triangle (B) A paraboloid (C) An ellipse (D) None of these

Last Answer : Answer: Option B

For a circular slab carrying a uniformly distributed load, the ratio of the maximum negative to maximum positive radial moment, is (A) 1 (B) 2 (C) 3 (D) 5

Description : For a circular slab carrying a uniformly distributed load, the ratio of the maximum negative to maximum positive radial moment, is (A) 1 (B) 2 (C) 3 (D) 5

Last Answer : Answer: Option B

If W is the load on a circular slab of radius R, the maximum circumferential moment at the centre of the slab, is (A) WR²/16 (B) 2WR²/16 (C) 3WR²/16 (D) Zero

Description : If W is the load on a circular slab of radius R, the maximum circumferential moment at the centre of the slab, is (A) WR²/16 (B) 2WR²/16 (C) 3WR²/16 (D) Zero

Last Answer : Answer: Option C

is the load on a circular slab of radius , the maximum radial moment at the centre of the slab, is (A) WR²/16 (B) 2WR²/16 (C) 3WR²/16 (D) 5WR²/16

Description : is the load on a circular slab of radius , the maximum radial moment at the centre of the slab, is (A) WR²/16 (B) 2WR²/16 (C) 3WR²/16 (D) 5WR²/16

Last Answer : Answer: Option C

If is the uniformly distributed load on a circular slab of radius fixed at its ends, the maximum positive radial moment at its centre, is (A) 3WR²/16 (B) 2WR²/16 (C) WR²/16(D) None of these

Description : If is the uniformly distributed load on a circular slab of radius fixed at its ends, the maximum positive radial moment at its centre, is (A) 3WR²/16 (B) 2WR²/16 (C) WR²/16 (D) None of these

Last Answer : Answer: Option C

The areas of cross-section of a square beam and a circular beam subjected to equal bending moments, are same. (A) Circular beam is more economical (B) Square beam is more economical (C) Both the beams are equally strong (D) Both the beams are equally economical

Description : The areas of cross-section of a square beam and a circular beam subjected to equal bending  moments, are same.  (A) Circular beam is more economical  (B) Square beam is more economical  (C) Both the beams are equally strong  (D) Both the beams are equally economical 

Last Answer : (B) Square beam is more economical 

A solid circular shaft of diameter d is subjected to a torque T. The maximum normal stress induced in the shaft, is (A) Zero (B) 16T/ 3 (C) 32T/ 3 (D) None of these

Description : A solid circular shaft of diameter d is subjected to a torque T. The maximum normal stress induced  in the shaft, is  (A) Zero  (B) 16T/ 3 (C) 32T/ 3 (D) None of these

Last Answer : (B) 16T/ 3

If a constant section beam is subjected to a uniform bending moment throughout, its length bends to (A) A circular arc (B) A parabolic arc (C) A catenary (D) None of these

Description : If a constant section beam is subjected to a uniform bending moment throughout, its length bends  to  (A) A circular arc  (B) A parabolic arc  (C) A catenary  (D) None of these 

Last Answer : (A) A circular arc 

Pick up the assumption for the design of a pre-stressed concrete member from the following: (A) A transverse plane section remains a plane after bending (B) During deformation limits, Hook's law is equally applicable to concrete as well as to steel (C) Variation of stress in reinforcement due to changes in external loading is negligible (D) All the above

Description : Pick up the assumption for the design of a pre-stressed concrete member from the following: (A) A transverse plane section remains a plane after bending (B) During deformation limits, Hook's ... of stress in reinforcement due to changes in external loading is negligible (D) All the above

Last Answer : Answer: Option D

The locus of reaction of a two hinged semi-circular arch, is (A) Straight line (B) Parabola (C) Circle (D) Hyperbola

Description : The locus of reaction of a two hinged semi-circular arch, is  (A) Straight line  (B) Parabola  (C) Circle  (D) Hyperbola 

Last Answer : (A) Straight line 

The stress-strain curve concrete in compression follows [ A ] a straight line [ B ] a rectangular parabolic curve [ C ] a semi circular arc [ D ] a cubic parabola

Description : The stress-strain curve concrete in compression follows [ A ] a straight line [ B ] a rectangular parabolic curve [ C ] a semi circular arc [ D ] a cubic parabola

Last Answer : [ B ] a rectangular parabolic curve

The stress-strain curve concrete in compression follows [ A ] a straight line [ B ] a rectangular parabolic curve [ C ] a semi circular arc [ D ] a cubic parabola

Description : The stress-strain curve concrete in compression follows [ A ] a straight line [ B ] a rectangular parabolic curve [ C ] a semi circular arc [ D ] a cubic parabola

Last Answer : [ B ] a rectangular parabolic curve

A pressure conduit laid underground, may not be subjected to (A) Internal pressure of water (B) Pressure due to external load (C) Longitudinal temperature stress (D) Longitudinal stresses due to unbalanced pressure to bends

Description : A pressure conduit laid underground, may not be subjected to  (A) Internal pressure of water  (B) Pressure due to external load  (C) Longitudinal temperature stress  (D) Longitudinal stresses due to unbalanced pressure to bends 

Last Answer : (C) Longitudinal temperature stress 

When a thin plate is subjected to loading in its own plane only, the condition is called _ a.plane stress b.plane strain c.zero stress d.zero strain

Description : When a thin plate is subjected to loading in its own plane only, the condition is called _ a.plane stress b.plane strain c.zero stress d.zero strain

Last Answer : a.plane stress

When a material is subjected to fatigue loading, the ratio of the endurance limit to the ultimate tensile strength is (a) 0.20 (b) 0.35 (c) 0.50 (d) 0.65

Description : When a material is subjected to fatigue loading, the ratio of the endurance limit to the ultimate tensile strength is (a) 0.20 (b) 0.35 (c) 0.50 (d) 0.65

Last Answer : (c) 0.50

A material subjected __________ must have high resilience. (A) Shock loading (B) Vibration (C) Fatigue (D) Tension

Description : A material subjected __________ must have high resilience. (A) Shock loading (B) Vibration (C) Fatigue (D) Tension

Last Answer : (A) Shock loading

A region in front of a paraboloid antenna. A. Transmission zone B. All of these C. Fraunhofer D. Fresnel

Description : A region in front of a paraboloid antenna. A. Transmission zone B. All of these C. Fraunhofer D. Fresnel

Last Answer : B. All of these

How many major lobes are produced by a paraboloid reflector?

Description : How many major lobes are produced by a paraboloid reflector?

Last Answer : One.

The beam from a horizontally positioned cylindrical paraboloid is narrow in what plane?

Description : The beam from a horizontally positioned cylindrical paraboloid is narrow in what plane?

Last Answer : . Vertical.

A horizontally truncated paraboloid antenna is used for what purpose?

Description : A horizontally truncated paraboloid antenna is used for what purpose?

Last Answer : Determine elevation.

if a charged particle projected in a gravity free room deflects,

Description : if a charged particle projected in a gravity free room deflects,

Last Answer : if a charged particle projected in a gravity free room deflects, A. there must be an electric field B ... Both fields cannot be zero D. None of above

When testing a capacitor with an analog type ohmmeter, a good capacitor will be indicated when _____________. A. there is no meter deflection B. the meter deflects to a low resistance value and remains there C. the meter deflects to a low resistance value and slowly increases towards infinity D. the meter deflects to a low resistance value and increases rapidly to a higher value, but stays fairly low

Description : When testing a capacitor with an analog type ohmmeter, a good capacitor will be indicated when _____________. A. there is no meter deflection B. the meter deflects to a low resistance value and ... deflects to a low resistance value and increases rapidly to a higher value, but stays fairly low

Last Answer : Answer: C

Why does the International Dateline deflects to a side?

Description : Why does the International Dateline deflects to a side?

Last Answer : To avoid Aleutian Islands

A car having a mass of 1000 kg deflects its springs 4 cm under its load. Determine the natural frequency of the car in vertical direction. A 5 Hz B 4.67 Hz C 9.8 Hz D 2.49 Hz

Description : A car having a mass of 1000 kg deflects its springs 4 cm under its load. Determine the natural frequency of the car in vertical direction. A 5 Hz B 4.67 Hz C 9.8 Hz D 2.49 Hz

Last Answer : D 2.49 Hz

A car having a mass of 1000 kg deflects its springs 4 cm under its load. Determine the natural frequency of the car in vertical direction. A 5 HzB 4.67 Hz C 9.8 Hz D 2.49 Hz

Description : A car having a mass of 1000 kg deflects its springs 4 cm under its load. Determine the natural frequency of the car in vertical direction. A 5 HzB 4.67 Hz C 9.8 Hz D 2.49 Hz

Last Answer : D 2.49 Hz

A car having a mass of 1000 kg deflects its springs 4 cm under its load. D Determine the natural frequency of the car in vertical direction. (A)5 Hz (B) 4.67 Hz (C) 9.8 Hz (D) 2.49 Hz

Description : A car having a mass of 1000 kg deflects its springs 4 cm under its load. D Determine the natural frequency of the car in vertical direction. (A)5 Hz (B) 4.67 Hz (C) 9.8 Hz (D) 2.49 Hz

Last Answer : (D) 2.49 Hz

A car weighing 1000kg deflects its springs by 0.4cm under its load. Determine the natural frequency of 2 car in vertical direction take g=10N/m a) 25 rad/sec b)50 rad/sec c) 2 rad/sec d)none

Description : A car weighing 1000kg deflects its springs by 0.4cm under its load. Determine the natural frequency of 2 car in vertical direction take g=10N/m a) 25 rad/sec b)50 rad/sec c) 2 rad/sec d)none

Last Answer : b)50 rad/sec

A body of mass 20 kg is suspended from a spring which deflects 20mm under this load. Calculate the frequency of free vibrations in Hz. a) 3.5 b) 5 c) 6 d) 7

Description : A body of mass 20 kg is suspended from a spring which deflects 20mm under this load. Calculate the frequency of free vibrations in Hz. a) 3.5 b) 5 c) 6 d) 7

Last Answer : a) 3.5

The eccentricity (e) of a hollow circular column, external diameter 25 cm, internal diameter 15 cm for an eccentric load 100 t for non-development of tension, is (A) 2.75 cm (B) 3.00 cm (C) 3.50 cm (D) 4.25 cm

Description : The eccentricity (e) of a hollow circular column, external diameter 25 cm, internal diameter 15 cm  for an eccentric load 100 t for non-development of tension, is  (A) 2.75 cm  (B) 3.00 cm  (C) 3.50 cm  (D) 4.25 cm

Last Answer : (D) 4.25 cm

The shape of the bending moment diagram over the length of a beam, having no external load, is always (A) Linear (B) Parabolic (C) Cubical (D) Circular

Description : The shape of the bending moment diagram over the length of a beam, having no external load, is always (A) Linear (B) Parabolic (C) Cubical (D) Circular

Last Answer : (A) Linear

The ratio of the moments of resistance of a solid circular shaft of diameter D and a hollow shaft (external diameter D and internal diameter d), is (A) D 4 /(D 4 - d 4 ) (B) D 3 /(D 3 - d 3 ) (C) (D 4 - d 4 )/D 4 (D) (D 3 - d 3 )/D 3

Description : The ratio of the moments of resistance of a solid circular shaft of diameter D and a hollow shaft (external diameter D and internal diameter d), is (A) D 4 /(D 4 - d 4 ) (B) D 3 /(D 3 - d 3 ) (C) (D 4 - d 4 )/D 4 (D) (D 3 - d 3 )/D 3

Last Answer : (A) D 4 /(D 4 - d 4 )

The key in the form of semi-circular disk of uniform thickness is called, (A) Sunk key (B) Feather key (C) Woodruff key (D) Kennedy key

Description : The key in the form of semi-circular disk of uniform thickness is called, (A) Sunk key (B) Feather key (C) Woodruff key (D) Kennedy key

Last Answer : (C) Woodruff key

If a circular shaft is welded to the plate by means of circumferential fillet, then the shaft is subjected to torsional moment M. If throat of weld is t, then torsional shear stress is given by a) M/2πtr2 b) M/πtr2 c) M/4πtr2 d) None of the listed

Description : If a circular shaft is welded to the plate by means of circumferential fillet, then the shaft is subjected to torsional moment M. If throat of weld is t, then torsional shear stress is given by a) M/2πtr2 b) M/πtr2 c) M/4πtr2 d) None of the listed

Last Answer : a) M/2πtr2

If a flat plate with a circular hole is subjected to tensile force, then its theoretical stress concentration factor is? a) 2 b) 3 c) 4 d) 1

Description : If a flat plate with a circular hole is subjected to tensile force, then its theoretical stress concentration factor is? a) 2 b) 3 c) 4 d) 1

Last Answer : b) 3

What is the value of shear stress acting on a plane of circular bar which is subjected to axial tensile load of 100 kN? (Diamet a. 58.73 Mpa b. 40.23 Mpa c. 39.60 Mpa d. Insufficient data

Description : What is the value of shear stress acting on a plane of circular bar which is subjected to axial tensile load of 100 kN? (Diamet a. 58.73 Mpa b. 40.23 Mpa c. 39.60 Mpa d. Insufficient data

Last Answer : c. 39.60 Mpa

Find the magnetic field when a circular conductor of very high radius is subjected to a current of 12A and the point P is at the centre of the conductor. a) 1 b) ∞ c) 0 d) -∞

Description : Find the magnetic field when a circular conductor of very high radius is subjected to a current of 12A and the point P is at the centre of the conductor. a) 1 b) ∞ c) 0 d) -∞

Last Answer : c) 0

A solid circular shaft of diameter 100 mm is subjected to an axial stress of 50 Mpa. It is further subjected to a torque of 10 kNm. The maximum principal stress experienced on the shaft is closest to (a) 41Mpa (b) 82 Mpa (c) 164 Mpa (d) 204 Mpa

Description : A solid circular shaft of diameter 100 mm is subjected to an axial stress of 50 Mpa. It is further subjected to a torque of 10 kNm. The maximum principal stress experienced on the shaft is closest to (a) 41Mpa (b) 82 Mpa (c) 164 Mpa (d) 204 Mpa

Last Answer : (b) 82 Mpa

A circular shaft subjected to torsion undergoes a twist of 10in a length of 120 cm. If the maximum shear stress induced is limited to 1000 kg/cm2and if modulus of rigidity G = 0.8 x 106then the radius of the shaft should be (a) p/8 (b) p/27 (c) 18/p (d) 27/p

Description : A circular shaft subjected to torsion undergoes a twist of 10in a length of 120 cm. If the maximum shear stress induced is limited to 1000 kg/cm2and if modulus of rigidity G = 0.8 x 106then the radius of the shaft should be (a) p/8 (b) p/27 (c) 18/p (d) 27/p

Last Answer : (d) 27/p

A hollow prismatic beam of circular section is subjected to a torsional moment. The maximum shear stress occurs at (a) inner wall of cross section (b) middle of thickness (c) outer surface of shaft (d) none of these

Description : A hollow prismatic beam of circular section is subjected to a torsional moment. The maximum shear stress occurs at (a) inner wall of cross section (b) middle of thickness (c) outer surface of shaft (d) none of these

Last Answer : (c) outer surface of shaft

The variation of shear stress in a circular shaft subjected to torsion is a. Linear b. Parabolic c. Hyperbolic. d. Uniform

Description : The variation of shear stress in a circular shaft subjected to torsion is a. Linear b. Parabolic c. Hyperbolic. d. Uniform

Last Answer : a. Linear

A circular pipe is subjected to maximum shear force of 60 kN. What is the diameter of the pipe if maximum allowable shear stress is 5 Mpa? a. 27.311 mm b. 75.56 mm c. 142.72 mm d. 692.10 mm

Description : A circular pipe is subjected to maximum shear force of 60 kN. What is the diameter of the pipe if maximum allowable shear stress is 5 Mpa? a. 27.311 mm b. 75.56 mm c. 142.72 mm d. 692.10 mm

Last Answer : c. 142.72 mm

A beam is a structural member which is subjected to (a) Axial tension or compression (b) Transverse loads and couples (c) Twisting moment (d) No load, but its axis should be horizontal and x-section rectangular or circular

Description : A beam is a structural member which is subjected to (a) Axial tension or compression (b) Transverse loads and couples (c) Twisting moment (d) No load, but its axis should be horizontal and x-section rectangular or circular

Last Answer : b) Transverse loads and couples

Loading a Flash movie via an external link?

Description : Loading a Flash movie via an external link?

Last Answer : Your best bet is to use javascript to call methods in the main flash file that cause it to load your individual galleries and dispose of old ones. If you're using AS3 then you'll need to expose ... is make that callback method load in whatever is passed to it (or however you want it to function).