Write definition of ‘‘Branch’’ and ‘‘Node’’ related to electric circuit.

Write definition of ‘‘Branch’’ and ‘‘Node’’ related to electric circuit.
by

1 Answer

Answer :

i) Branch: A part of an electric network which lies between two junctions or nodes is known as branch. 


ii) Node: A point or junction where two or more elements of the network are connected together is called as node. 

by

Related questions

(i) Bilateral Network (ii) Node (iii) Loop (iv) Branch

Description : (i) Bilateral Network (ii) Node (iii) Loop (iv) Branch

Last Answer : (i) Bilateral Network: If the characteristic of network (response or behavior) is independent of the direction of current through its elements in it, then the network is called as a bilateral network e. ... A part of an electric network which lies between two junctions or nodes is known as branch. 

Define the terms : i) Node ii) Branch iii) Loop iv) Mesh

Description : Define the terms : i) Node ii) Branch iii) Loop iv) Mesh

Last Answer : i) Node:  A point or junction where two or more elements of the network are connected together is called as node.  ii) Branch: A part of an electric network which lies between two junctions ... path (same as loop) in an electric circuit. OR A loop that does not contain any other loop inside

What is Decision Tree? a) Flow-Chart b) Structure in which internal node represents test on an attribute, each branch represents outcome of test and each leaf node represents class label c) Flow-Chart & Structure in which internal node represents test on an attribute, each branch represents outcome of test and each leaf node represents class label d) None of the mentioned

Description : What is Decision Tree? a) Flow-Chart b) Structure in which internal node represents test on an attribute, each branch represents outcome of test and each leaf node represents class label c) ... branch represents outcome of test and each leaf node represents class label d) None of the mentioned

Last Answer : c) Flow-Chart & Structure in which internal node represents test on an attribute, each branch represents outcome of test and each leaf node represents class label

A spanningtree is agraph in which there is no_____. A) node B) branch C) loop D) arc

Description : A spanningtree is agraph in which there is no_____. A) node B) branch C) loop D) arc

Last Answer : loop

A low branch with a node is bent down and covered with soil in a) Marcotting b) Layering c)Cutting d) Budding

Description : A low branch with a node is bent down and covered with soil in a) Marcotting b) Layering c)Cutting d) Budding

Last Answer : b) Layering

Which of the following is/are true concerning electric power operated watertight door systems? A. Each motor driven door must use the main bus as its source of power. B. Each distribution panel for the system must be on the lowest level where berthing quarters are located. C. Distribution panels must not be provided with a means of locking in order to permit quick activation of the system. D. Each system must have a separate branch circuit.

Description : Which of the following is/are true concerning electric power operated watertight door systems? A. Each motor driven door must use the main bus as its source of power. B. Each distribution panel for ... to permit quick activation of the system. D. Each system must have a separate branch circuit.

Last Answer : Answer: D

Define- (i) Node (ii) Loop for a DC circuit

Description : Define- (i) Node (ii) Loop for a DC circuit

Last Answer : Ans: i) Node: A point or junction at which two or more elements of network are connected is called as node. ii) Loop: A closed path for flow of current in an electrical circuit is called loop.

Branch circuit must not feed more than __________ points

Description : Branch circuit must not feed more than __________ points

Last Answer : Branch circuit must not feed more than 10 points

Consider a circuit with three parallel branches connected across a DC supply. What is the ratio of the branch

Description : Consider a circuit with three parallel branches connected across a DC supply. What is the ratio of the branch currents I1 : I2 : I3 if the branch resistances are in the ratio of 2 : 3 : 4 respectively? A) 2 : 3 : 4 B) 6 : 4 : 3 C) 4 : 3 : 2 D) None of these

Last Answer : Consider a circuit with three parallel branches connected across a DC supply. What is the ratio of the branch currents I1 : I2 : I3 if the branch resistances are in the ratio of 2 : 3 : 4 respectively? A) 2 : 3 : 4 B) 6 : 4 : 3 C) 4 : 3 : 2 D) None of these

Sinusoidal Steady-State Analysis - Using nodal analysis, find node voltages in the circuit.

Description : Sinusoidal Steady-State Analysis - Using nodal analysis, find node voltages in the circuit.

Last Answer : Sinusoidal Steady-State Analysis - Using nodal analysis, find node voltages in the circuit.

A parallel RLC circuit has the node equation Determine v(t) using the phasor method.

Description : A parallel RLC circuit has the node equation Determine v(t) using the phasor method.

Last Answer : A parallel RLC circuit has the node equation Determine v(t) using the phasor method.

Find the node voltage of the following circuit?

Description : Find the node voltage of the following circuit?

Last Answer : Solution:- Hence V1 = -6 and V2 = -15

What is a node in an electrical circuit?

Description : What is a node in an electrical circuit?

Last Answer : a positively charged electrons

Which branch of science helps avoid or minimize stress-related injuries at workplace?

Description : Which branch of science helps avoid or minimize stress-related injuries at workplace?

Last Answer : Psychology

Mail agency master related to CRC means a) The mail agent of the mail office b) The mail guard of the agency branch c) It contains agencies detail of MMS & Sections for carrying bags closed in the CRC to other offices d) None of these

Description : Mail agency master related to CRC means a) The mail agent of the mail office b) The mail guard of the agency branch c) It contains agencies detail of MMS & Sections for carrying bags closed in the CRC to other offices d) None of these

Last Answer : c) It contains agencies detail of MMS & Sections for carrying bags closed in the CRC to other offices

A network has 10 nodes and 17 branches. The number of different node pair voltage would be

Description : A network has 10 nodes and 17 branches. The number of different node pair voltage would be

Last Answer : A network has 10 nodes and 17 branches. The number of different node pair voltage would be 45.

Which one is NOT related to rapid prototyping definition? a.Layer by layer b.Physical model c.From 3D CAD data d.Production line

Description : Which one is NOT related to rapid prototyping definition? a.Layer by layer b.Physical model c.From 3D CAD data d.Production line

Last Answer : d.Production line

The meaning of the definition of a problem is Options: A) To define the complex words in the problem and suggest their meaning in the light of the problem B) To limit the problem in words C) To present the definition of different authors related to problem D) None of the above

Description : The meaning of the definition of a problem is Options: A) To define the complex words in the problem and suggest their meaning in the light of the problem B) To limit the problem in words C) To present the definition of different authors related to problem D) None of the above

Last Answer : A) To define the complex words in the problem and suggest their meaning in the light of the problem

The step of experimental method is Options: A) Selection and definition of a problem B) Survey of the related literature C) Experimental design D) All the above

Description : The step of experimental method is Options: A) Selection and definition of a problem B) Survey of the related literature C) Experimental design D) All the above

Last Answer : D) All the above 

In a parallel circuit the current in each branch of the circuit is determined by?

Description : In a parallel circuit the current in each branch of the circuit is determined by?

Last Answer : Need answer

What appliances must be supplied by and individual branch circuit?

Description : What appliances must be supplied by and individual branch circuit?

Last Answer : What is the answer ?

In the lighting distribution circuit shown in the illustration, if all switches are closed and fuse 'F2' were to open, all lights on branches ____________. EL-0013 A. '1', '2', and '3' would go out B. '1' and '3' would would burn dimly, while branch '2' would burn normally C. '1', '2', and '3' would burn dimly D. '1' and '3' would go out, while branch '2' would remain lit

Description : In the lighting distribution circuit shown in the illustration, if all switches are closed and fuse 'F2' were to open, all lights on branches ____________. EL-0013 A. '1', '2', and '3' would go out B. '1' ... and '3' would burn dimly D. '1' and '3' would go out, while branch '2' would remain lit

Last Answer : Answer: D

Two 100 watt light bulbs are connected in parallel across a 100 volt power supply. The total power developed in the circuit is _______________. A. 200 watts B. 100 watts C. 50 watts D. equal to the product of the amperes times the voltage in each branch

Description : Two 100 watt light bulbs are connected in parallel across a 100 volt power supply. The total power developed in the circuit is _______________. A. 200 watts B. 100 watts C. 50 watts D. equal to the product of the amperes times the voltage in each branch

Last Answer : Answer: A

In the illustration if BRANCH NO. 1 is a lighting circuit for crew's berthing, Federal Regulations (46 CFR) require the maximum fuse rating for that branch to be _________. EL-0013 A. 80% of the connected load B. 15 amps C. 20 amps D. 30 amps

Description : In the illustration if BRANCH NO. 1 is a lighting circuit for crew's berthing, Federal Regulations (46 CFR) require the maximum fuse rating for that branch to be _________. EL-0013 A. 80% of the connected load B. 15 amps C. 20 amps D. 30 amps

Last Answer : Answer: C

In the illustration if BRANCH NO. 1 is a lighting circuit for crew's berthing, 46 CFR requires the maximum fuse rating for that branch to be _________. EL-0013 A. 15 amps B. 80% of the connected load C. 20 amps D. 30 amps

Description : In the illustration if BRANCH NO. 1 is a lighting circuit for crew's berthing, 46 CFR requires the maximum fuse rating for that branch to be _________. EL-0013 A. 15 amps B. 80% of the connected load C. 20 amps D. 30 amps

Last Answer : Answer: C

What power would be consumed in EACH of the branch resistors of the circuit shown in the illustration if the source is 30 volts, the resistance for R1 is 10 ohms, R2 is 10 ohms and R3 is 10 ohms? EL-0032 A. 5 watts B. 10 watts C. 20 watts D. 40 watts

Description : What power would be consumed in EACH of the branch resistors of the circuit shown in the illustration if the source is 30 volts, the resistance for R1 is 10 ohms, R2 is 10 ohms and R3 is 10 ohms? EL-0032 A. 5 watts B. 10 watts C. 20 watts D. 40 watts

Last Answer : Answer: B

The total resistance of a parallel circuit is always ____________. A. larger than that of the branch with the greatest resistance B. smaller than that of the branch with the lowest resistance C. equal to the sum of the individual branch resistances D. equal to the sum of the individual branch resistances divided by the number of branches

Description : The total resistance of a parallel circuit is always ____________. A. larger than that of the branch with the greatest resistance B. smaller than that of the branch with the lowest resistance C ... resistances D. equal to the sum of the individual branch resistances divided by the number of branches

Last Answer : Answer: B

A ground in an electrical circuit outside the engine room _____________. A. cannot be detected under normal conditions B. is of no consequence to engineering personnel C. is indicated at the branch circuit breaker panel D. is indicated by the ground detecting lamps on the main switchboard

Description : A ground in an electrical circuit outside the engine room _____________. A. cannot be detected under normal conditions B. is of no consequence to engineering personnel C. is indicated at the branch circuit breaker panel D. is indicated by the ground detecting lamps on the main switchboard

Last Answer : Answer: D

The total resistance of a parallel circuit is always ____________. A. larger than the greatest branch resistance B. smaller than the lowest branch resistance C. equal to the sum of the individual branch resistances D. one-half the sum of the individual branch resistances

Description : The total resistance of a parallel circuit is always ____________. A. larger than the greatest branch resistance B. smaller than the lowest branch resistance C. equal to the sum of the individual branch resistances D. one-half the sum of the individual branch resistances

Last Answer : Answer: B

The purpose of a short circuit forcing module (short time trip) installed in a branch line is to provide ____________. A. high speed clearance of low impedance short circuits in the branch B. continuity of service on main bus under short circuit conditions in a branch C. isolation of short circuits by selective tripping of branch circuit breakers D. all of the above

Description : The purpose of a short circuit forcing module (short time trip) installed in a branch line is to provide ____________. A. high speed clearance of low impedance short circuits in the branch B. ... C. isolation of short circuits by selective tripping of branch circuit breakers D. all of the above

Last Answer : Answer: D

A special service circuit connecting two private branch exchanges (PBX). A. Phantom line B. Private line C. Tie trunk D. Tandem trunk

Description : A special service circuit connecting two private branch exchanges (PBX). A. Phantom line B. Private line C. Tie trunk D. Tandem trunk

Last Answer : C. Tie trunk

Which type of splice is used to splice a lighting fixture to a branch circuit?

Description : Which type of splice is used to splice a lighting fixture to a branch circuit?

Last Answer : Fixture joint.

If one branch of a parallel network is shorted, what portion of circuit current flows through the remaining branches?

Description : If one branch of a parallel network is shorted, what portion of circuit current flows through the remaining branches?

Last Answer : None.

What is the effect on total resistance and total current in a circuit if a short occurs in (a) a parallel branch, and (b) in a series portion?

Description : What is the effect on total resistance and total current in a circuit if a short occurs in (a) a parallel branch, and (b) in a series portion?

Last Answer : (a) Total resistance decreases, total current increases (b) Total resistance decreases, total current increases

What is the effect on total resistance and total current in a circuit if an open occurs in (a) a parallel branch, and (b) in a series portion?

Description : What is the effect on total resistance and total current in a circuit if an open occurs in (a) a parallel branch, and (b) in a series portion?

Last Answer : (a) Total resistance increases, total current decreases (b) Total resistance becomes infinite, total current is equal to zero

A circuit which employs a DIRECT CURRENT source has a branch which contains a capacitor. After the circuit has reached a steady state, what is the magnitude of the current in the circuit branch which contains the capacitor?

Description : A circuit which employs a DIRECT CURRENT source has a branch which contains a capacitor. After the circuit has reached a steady state, what is the magnitude of the current in the circuit branch which contains the capacitor?

Last Answer : ANSWER: THE CURRENT IS ZERO

Two unpedauces given by Z1 = 10 + j5 and Z2 = 8 + j9 are joined in parallel and connected across a voltage of V = 200 + j0. Calculate the circuit current and branch currents. Draw the vector diagram.

Description : Two unpedauces given by Z1 = 10 + j5 and Z2 = 8 + j9 are joined in parallel and connected across a voltage of V = 200 + j0. Calculate the circuit current and branch currents. Draw the vector diagram.

Last Answer : Solution: Given, Z1=10+j5, Z2=8+j9, V=200+j0

What is the definition of electric current density ?

Description : What is the definition of electric current density ?

Last Answer : Flow density is the flow of electricity flowing through the area of a single cross section per conductor. If the cross-sectional area of a conductor is A and the current flowing through it is I then the current density will be J , J = I / A but I = nAve so J = nAve / A = nve

What is definition of electric current?

Description : What is definition of electric current?

Last Answer : Current is the motion of electrons in a conductor beingpropelled by electromotive force (voltage).

Choose the best definition of dielectric loss. a) Absorption of electric energy by dielectric in an AC field b) Dissipation of electric energy by dielectric in a static field c) Dissipation of heat by dielectric d) Product of loss tangent and relative permittivity

Description : Choose the best definition of dielectric loss. a) Absorption of electric energy by dielectric in an AC field b) Dissipation of electric energy by dielectric in a static field c) Dissipation of heat by dielectric d) Product of loss tangent and relative permittivity

Last Answer : a) Absorption of electric energy by dielectric in an AC field

The best definition of polarisation is a) Orientation of dipoles in random direction b) Electric dipole moment per unit volume c) Orientation of dipole moments d) Change in polarity of every dipole

Description : The best definition of polarisation is a) Orientation of dipoles in random direction b) Electric dipole moment per unit volume c) Orientation of dipole moments d) Change in polarity of every dipole

Last Answer : b) Electric dipole moment per unit volume

Production of heat due to electric current is related to

Description : Production of heat due to electric current is related to . (A) Ohm's law (B) Joule's law (C) Kelvin's law (D) Maxwell's law

Last Answer : production  of  heat   due  to  current  in  a  conductor  ohm's  law   .

State Ohm’s law for electric circuit.

Description : State Ohm’s law for electric circuit.

Last Answer : Ohms law -States that the current flows in a circuit is directly proportional to the applied voltage (V) and inversely the proportional resistance provided with the temperature main constant

List any eight equipment used in auxiliary circuit of electric locomotive.

Description : List any eight equipment used in auxiliary circuit of electric locomotive.

Last Answer : Ans: 1) Batteries , 2) Compressor , 3) Blowers , 4) Exhausters , 5) Pumps , 6) Cab ventilating fans.7) Locomotive heating (if any) , 8) Transformer oil cooling radiator. 9) head light , 10) Flasher light , 11) Marker light , 12) Engine Horn

Draw a neat sketch of earth fault protection of auxiliary circuit of electric loco. State the function of relay and isolating resistance.

Description : Draw a neat sketch of earth fault protection of auxiliary circuit of electric loco. State the function of relay and isolating resistance.

Last Answer : Ans: Earth fault protection for auxiliaries in Loco: Function of relay: The earth fault occurring anywhere in the auxiliary circuit gets monitored by the relay which acts to trip the main CB. Function of ... star point to earth through a high resistance so that the relay operation is avoided.

Compare electric and magnetic circuit.

Description : Compare electric and magnetic circuit.

Last Answer : Comparison between Magnetic and Electric Circuits

Draw a typical electric circuit including ammeter and voltmeter.

Description : Draw a typical electric circuit including ammeter and voltmeter.

Last Answer : The figure shows typical electric circuit including ammeter and voltmeter. Ammeter is connected in series for measurement of current. Voltmeter is connected in parallel for measurement of voltage. Fuse is use ... are used. If the electric supply is DC the DC ammeter and DC voltmeter are used.

Permeability in a magnetic circuit corresponds to______ in an electric circuit.

Description : Permeability in a magnetic circuit corresponds to______ in an electric circuit.

Last Answer : Permeability in a magnetic circuit corresponds to conductivity in an electric circuit.

What is the direction of flow of electric current in an electric circuit?

Description : What is the direction of flow of electric current in an electric circuit?

Last Answer : It  flows  from  anode  to  cathode  (direction  of   holes  flow)