If one branch of a parallel network is shorted, what portion of circuit current flows through the remaining branches?

If one branch of a parallel network is shorted, what portion  of circuit current flows through the remaining branches?
by

1 Answer

Answer :

None.
by

Related questions

What is the effect on total resistance and total current in a circuit if a short occurs in (a) a parallel branch, and (b) in a series portion?

Description : What is the effect on total resistance and total current in a circuit if a short occurs in (a) a parallel branch, and (b) in a series portion?

Last Answer : (a) Total resistance decreases, total current increases (b) Total resistance decreases, total current increases

What is the effect on total resistance and total current in a circuit if an open occurs in (a) a parallel branch, and (b) in a series portion?

Description : What is the effect on total resistance and total current in a circuit if an open occurs in (a) a parallel branch, and (b) in a series portion?

Last Answer : (a) Total resistance increases, total current decreases (b) Total resistance becomes infinite, total current is equal to zero

The total resistance of a parallel circuit is always ____________. A. larger than that of the branch with the greatest resistance B. smaller than that of the branch with the lowest resistance C. equal to the sum of the individual branch resistances D. equal to the sum of the individual branch resistances divided by the number of branches

Description : The total resistance of a parallel circuit is always ____________. A. larger than that of the branch with the greatest resistance B. smaller than that of the branch with the lowest resistance C ... resistances D. equal to the sum of the individual branch resistances divided by the number of branches

Last Answer : Answer: B

Consider a circuit with three parallel branches connected across a DC supply. What is the ratio of the branch

Description : Consider a circuit with three parallel branches connected across a DC supply. What is the ratio of the branch currents I1 : I2 : I3 if the branch resistances are in the ratio of 2 : 3 : 4 respectively? A) 2 : 3 : 4 B) 6 : 4 : 3 C) 4 : 3 : 2 D) None of these

Last Answer : Consider a circuit with three parallel branches connected across a DC supply. What is the ratio of the branch currents I1 : I2 : I3 if the branch resistances are in the ratio of 2 : 3 : 4 respectively? A) 2 : 3 : 4 B) 6 : 4 : 3 C) 4 : 3 : 2 D) None of these

Two basic types of pruning are heading-back and thinning-out. Which of the following is true about these pruning methods? a. Thinning cuts leave behind a good portion of the stem and many axillary buds. b. Thinning cuts are made close to a main branch or ground and few axillary buds are left. c. Heading cuts usually remove entire branches and leave no buds. d. Heading cuts remove a portion of the stem and only terminal buds are lef

Description : Two basic types of pruning are heading-back and thinning-out. Which of the following is true about these pruning methods? a. Thinning cuts leave behind a good portion of the stem and many axillary buds. ... leave no buds. d. Heading cuts remove a portion of the stem and only terminal buds are lef

Last Answer : Thinning cuts are made close to a main branch or ground and few axillary buds are left

You have installed a Zener diode in parallel with a load. While measuring the voltage across the Zener diode it is found that it does not change as the current through the load increases. This means that the Zener diode __________. A. is working as it should B. is shorted C. is open D. does not regulate as it should

Description : You have installed a Zener diode in parallel with a load. While measuring the voltage across the Zener diode it is found that it does not change as the current through the load increases. This means that the ... is working as it should B. is shorted C. is open D. does not regulate as it should

Last Answer : Answer: A

What is the reactance property at the input of a shorted quarter wavelength line? A. A parallel LC circuit B. A pure inductive reactance C. A series LC circuit D. A pure capacitive reactance

Description : What is the reactance property at the input of a shorted quarter wavelength line? A. A parallel LC circuit B. A pure inductive reactance C. A series LC circuit D. A pure capacitive reactance

Last Answer : A. A parallel LC circuit

In a compound-wound motor, a portion of the line current flows through the _____________. A. inertial poles B. stator C. shunt field coils D. frame

Description : In a compound-wound motor, a portion of the line current flows through the _____________. A. inertial poles B. stator C. shunt field coils D. frame

Last Answer : Answer: C

Owing to skin effect (a) current flows through the half cross-section of the conductor (b) portion of the conductor near the surface carries more current and core of the conductor carries less current (c) portion of the conductor near the surface carries less current and core of the conductor carries more cur¬rent (d) any of the above (e) none of the above

Description : Owing to skin effect (a) current flows through the half cross-section of the conductor (b) portion of the conductor near the surface carries more current and core of the conductor carries less current (c) ... core of the conductor carries more cur¬rent (d) any of the above (e) none of the above

Last Answer : (b) portion of the conductor near the surface carries more current and core of the conductor carries less current

There is a relationship between total current and current through the individual components in a circuit. What is this relationship in a series circuit and a parallel circuit?

Description : There is a relationship between total current and current through the individual components in a circuit. What is this relationship in a series circuit and a parallel circuit?

Last Answer : The source voltage would have to be increased to 640 volts

Can a parallel LC circuit be used as the frequency determining network for an rf amplifier?

Description : Can a parallel LC circuit be used as the frequency determining network for an rf amplifier?

Last Answer : Yes.

In the lighting distribution circuit shown in the illustration, if all switches are closed and fuse 'F2' were to open, all lights on branches ____________. EL-0013 A. '1', '2', and '3' would go out B. '1' and '3' would would burn dimly, while branch '2' would burn normally C. '1', '2', and '3' would burn dimly D. '1' and '3' would go out, while branch '2' would remain lit

Description : In the lighting distribution circuit shown in the illustration, if all switches are closed and fuse 'F2' were to open, all lights on branches ____________. EL-0013 A. '1', '2', and '3' would go out B. '1' ... and '3' would burn dimly D. '1' and '3' would go out, while branch '2' would remain lit

Last Answer : Answer: D

When you are using an ohmmeter to test a transistor for leakage, what is indicated by a low, but not shorted, reverse resistance reading?

Description : When you are using an ohmmeter to test a transistor for leakage, what is indicated by a low, but not shorted, reverse resistance reading?

Last Answer : A leaking transistor

When you zero a synchro with a synchro tester, what is indicated by a jump in the synchro tester's dial when the S1 and S3 leads are momentarily shorted?

Description : When you zero a synchro with a synchro tester, what is indicated by a jump in the synchro tester's dial when the S1 and S3 leads are momentarily shorted?

Last Answer : The synchro under test is not on electrical zero.

When testing an SCR with an ohmmeter, the SCR will conduct if what two elements are shorted together?

Description : When testing an SCR with an ohmmeter, the SCR will conduct if what two elements are shorted together?

Last Answer : Gate and anode.

You have just checked a fuse with an ohmmeter and find that the fuse is shorted. What should you

Description : You have just checked a fuse with an ohmmeter and find that the fuse is shorted. What should you

Last Answer : Put it back in the circuit. A good fuse will have zero ohms of resistance.

Why should a mercury cell NOT be shorted?

Description : Why should a mercury cell NOT be shorted?

Last Answer : The danger of explosion.

Why should a mercury cell NOT be shorted?

Description : Why should a mercury cell NOT be shorted?

Last Answer : The danger of explosion.

In a parallel circuit the current in each branch of the circuit is determined by?

Description : In a parallel circuit the current in each branch of the circuit is determined by?

Last Answer : Need answer

Two unpedauces given by Z1 = 10 + j5 and Z2 = 8 + j9 are joined in parallel and connected across a voltage of V = 200 + j0. Calculate the circuit current and branch currents. Draw the vector diagram.

Description : Two unpedauces given by Z1 = 10 + j5 and Z2 = 8 + j9 are joined in parallel and connected across a voltage of V = 200 + j0. Calculate the circuit current and branch currents. Draw the vector diagram.

Last Answer : Solution: Given, Z1=10+j5, Z2=8+j9, V=200+j0

A 10 ohm and a 20 ohm resistor are connected in parallel to a current source. What fraction of the current flows through the 20 ohm resistor? w) 1/2 x) 1/3 y) 2/3 z) 3/4

Description : A 10 ohm and a 20 ohm resistor are connected in parallel to a current source. What fraction of the current flows through the 20 ohm resistor? w) 1/2 x) 1/3 y) 2/3 z) 3/4

Last Answer : ANSWER: X -- 1/3

When is line current minimum in a parallel-LC circuit?

Description : When is line current minimum in a parallel-LC circuit?

Last Answer : At the resonant frequency.

In a parallel-resonant circuit, what is the relationship between impedance and current?

Description : In a parallel-resonant circuit, what is the relationship between impedance and current?

Last Answer : Maximum impedance, minimum current.

If you remove one bulb from a string of lights all the remaining lights will go out. are the lights in a series circuit or parallel circuit Explain?

Description : If you remove one bulb from a string of lights all the remaining lights will go out. are the lights in a series circuit or parallel circuit Explain?

Last Answer : Removing any bulb breaks the continuity of a series circuit, stopping the flow of electrical current. Removing a bulb in a parallel circuit does not interrupt the current flow, so the remaining lights continue to conduct electrical current.

Frequency counters or frequency divihat establishes the value of the current that flows in the output of figure 4-43?

Description : hat establishes the value of the current that flows in the output of figure 4-43?

Last Answer : The frequency of the voltage input.

Current that flows in pulses in the same direction is called

Description : Current that flows in pulses in the same direction is called

Last Answer : Pulsating dc

According to electron theory, an electric current flows from what potential to what potential?

Description : According to electron theory, an electric current flows from what potential to what potential?

Last Answer : Electron theory assumes that electron flow is from negative to positive.

What current flows in the interpole windings?

Description : What current flows in the interpole windings?

Last Answer : Armature current.

What would be the voltage drop across the parallel branches of the circuit shown in the illustration if the source is 30 volts the resistance for R1 is 10 ohms, R2 is 10 ohms and R3 is 10 ohms? EL-0032 A. 5 volts B. 10 volts C. 20 volts D. 30 volts

Description : What would be the voltage drop across the parallel branches of the circuit shown in the illustration if the source is 30 volts the resistance for R1 is 10 ohms, R2 is 10 ohms and R3 is 10 ohms? EL-0032 A. 5 volts B. 10 volts C. 20 volts D. 30 volts

Last Answer : Answer: B

Which type of splice is used to splice a lighting fixture to a branch circuit?

Description : Which type of splice is used to splice a lighting fixture to a branch circuit?

Last Answer : Fixture joint.

Of the floating iceberg in the sea, how much is the portion remaining above the sea level? -Do You Know?

Description : Of the floating iceberg in the sea, how much is the portion remaining above the sea level? -Do You Know?

Last Answer : answer:

Of the floating iceberg in the sea, the portion remaining above the sea level is : (a) 1/10th (b) 1/9th (c) 1/6th (d) 1/5th

Description : Of the floating iceberg in the sea, the portion remaining above the sea level is : (a) 1/10th (b) 1/9th (c) 1/6th (d) 1/5th

Last Answer : Ans: (a)

Of the floating iceberg in the sea, how much is the portion remaining above the sea level?

Description : Of the floating iceberg in the sea, how much is the portion remaining above the sea level?

Last Answer : 1/10th

Of the floating iceberg in the sea, how much is the portion remaining above the sea level?

Description : Of the floating iceberg in the sea, how much is the portion remaining above the sea level?

Last Answer : 1/10th

Why is the side-side shorted during the short circuit test in the transformer ?

Description : Why is the side-side shorted during the short circuit test in the transformer ?

Last Answer : During this test, any side of the transformer can be shorted, but for the following reasons, the side-side is shorted and 1. Lay-range instruments have the advantage of being connected to the high side ... both windings below 3% of the rated output , so it is convenient to measure on the high side.

How do you repair driver side airbag circuit low resistance or shorted Ford F150?

Description : How do you repair driver side airbag circuit low resistance or shorted Ford F150?

Last Answer : It might be a problem with the "clock spring".

If a single-phase induction motor fails to start, the problem may be _____________. A. an open in the main winding B. a shorted shunt field C. a closed centrifugal switch D. low circuit frequency

Description : If a single-phase induction motor fails to start, the problem may be _____________. A. an open in the main winding B. a shorted shunt field C. a closed centrifugal switch D. low circuit frequency

Last Answer : Answer: A

If a single-phase induction motor fails to start, the problem may be _____________. A. an open in the run winding B. a shorted shunt field C. a closed centrifugal switch D. low circuit frequency

Description : If a single-phase induction motor fails to start, the problem may be _____________. A. an open in the run winding B. a shorted shunt field C. a closed centrifugal switch D. low circuit frequency

Last Answer : Answer: A

The winch shown in the illustration will not operate in any speed in the lowering direction and at an abnormal speed in 'first point hoist'. The possible cause is that _______________. EL-0102 A. contactor coil '3M' has many shorted turns B. resistor 'R8-A2' has an open C. contacts '1M' in the power circuit are badly corroded D. master switch contacts 'MS6' have weak springs

Description : The winch shown in the illustration will not operate in any speed in the lowering direction and at an abnormal speed in 'first point hoist'. The possible cause is that _______________. EL-0102 A. ... '1M' in the power circuit are badly corroded D. master switch contacts 'MS6' have weak springs

Last Answer : Answer: B

If a wire passes through a connector what portion of the aircraft wire identification number changes?

Description : If a wire passes through a connector what portion of the aircraft wire identification number changes?

Last Answer : Wire segment letter.

Two infinitely long parallel conductors in vacuum any separated 1 metre between centers >then a current of 1 ampere flows the. uk each conductor, produce on each other a force of (a) 2 x 1(T2 N/m) (b) 2 x KT3 N/m (c) 2 x 10"5 N/m (d) 2x 1(T7 N/m)

Description : Two infinitely long parallel conductors in vacuum any separated 1 metre between centers >then a current of 1 ampere flows the. uk each conductor, produce on each other a force of (a) 2 x 1(T2 N/m) (b) 2 x KT3 N/m (c) 2 x 10"5 N/m (d) 2x 1(T7 N/m)

Last Answer : (d) 2x 1(T7 N/m)

Two 100 watt light bulbs are connected in parallel across a 100 volt power supply. The total power developed in the circuit is _______________. A. 200 watts B. 100 watts C. 50 watts D. equal to the product of the amperes times the voltage in each branch

Description : Two 100 watt light bulbs are connected in parallel across a 100 volt power supply. The total power developed in the circuit is _______________. A. 200 watts B. 100 watts C. 50 watts D. equal to the product of the amperes times the voltage in each branch

Last Answer : Answer: A

The total resistance of a parallel circuit is always ____________. A. larger than the greatest branch resistance B. smaller than the lowest branch resistance C. equal to the sum of the individual branch resistances D. one-half the sum of the individual branch resistances

Description : The total resistance of a parallel circuit is always ____________. A. larger than the greatest branch resistance B. smaller than the lowest branch resistance C. equal to the sum of the individual branch resistances D. one-half the sum of the individual branch resistances

Last Answer : Answer: B

Which of the following statements is true for Branch-and-Bound search? (A) Underestimates of remaining distance may cause deviation from optimal path. (B) Overestimates can’t cause right path to be overlooked. (C) Dynamic programming principle can be used to discard redundant partial paths. (D) All of the above

Description : Which of the following statements is true for Branch-and-Bound search? (A) Underestimates of remaining distance may cause deviation from optimal path. (B) Overestimates can't cause right path to be ... Dynamic programming principle can be used to discard redundant partial paths. (D) All of the above

Last Answer : (C) Dynamic programming principle can be used to discard redundant partial paths.

what is the purpose of the series-parallel network R 3, R 4, and R5?

Description : what is the purpose of the series-parallel network R 3, R 4, and R5?

Last Answer : The series-parallel network drops the remaining source voltage and is used to take the place of a single resistor (75 ohms) when the required ohmic value is not available in a single resistor.

A farmer in California owns a beautiful pear tree. He supplies the fruit to a nearby grocery store. The store owner has called the farmer to see how much fruit is available for him to purchase. The farmer knows that the main trunk has 24 branches. Each branch has exactly 12 boughs and each bough has exactly 6 twigs. Since each twig bears one piece of fruit, how many plums will the farmer be able to deliver? -Riddles

Description : A farmer in California owns a beautiful pear tree. He supplies the fruit to a nearby grocery store. The store owner has called the farmer to see how much fruit is available for him to purchase. The ... each twig bears one piece of fruit, how many plums will the farmer be able to deliver? -Riddles

Last Answer : None. A pear tree does not bear plums

A farmer owned a beautiful pear tree. He supplies the fruit to a nearby grocery store. The store has called the farmer to see how much fruit is available for him to purchase. The farmer knows that the main trunk has 24 branches. Each branch has exactly 12 boughs and each bough has exactly 6 twigs. Since each twig bears one piece of fruit, how many plums will the farmer be able to deliver? -Riddles

Description : A farmer owned a beautiful pear tree. He supplies the fruit to a nearby grocery store. The store has called the farmer to see how much fruit is available for him to purchase. The farmer knows that ... each twig bears one piece of fruit, how many plums will the farmer be able to deliver? -Riddles

Last Answer : None. A pear tree does not bear plums.

A farmer in California owns a beautiful pear tree. He supplies the fruit to a nearby grocery store. The store owner has called the farmer to see how much fruit is available for him to purchase. The farmer knows that the main trunk has 24 branches. Each branch has exactly 12 boughs and each bough has exactly 6 twigs. Since each twig bears one piece of fruit, how many plums will the farmer be able to deliver? -Riddles

Description : A farmer in California owns a beautiful pear tree. He supplies the fruit to a nearby grocery store. The store owner has called the farmer to see how much fruit is available for him to purchase. The ... each twig bears one piece of fruit, how many plums will the farmer be able to deliver? -Riddles

Last Answer : None. A pear tree does not bear plums.