Hot working of lead is carried out at (A) 75°C (B) 373°K (C) 150°C (D) Room temperature

Hot working of lead is carried out at
(A) 75°C
(B) 373°K
(C) 150°C
(D) Room temperature
by

1 Answer

Answer :

(B) 373°K
by

Related questions

Hot working of lead is carried out at (A) 75° C (B) 373° K (C) 150° C (D) Room temperature

Description : Hot working of lead is carried out at (A) 75° C (B) 373° K (C) 150° C (D) Room temperature

Last Answer : (D) Room temperature

In a counter flow heat exchanger, hot fluid enters at 170°C & leaves at 150°C, while the cold fluid enters at 50°C & leaves at 70°C. The arithmetic mean temperature difference in this case is __________ °C. (A) 20 (B) 60 (C) 120 (D) ∞

Description : In a counter flow heat exchanger, hot fluid enters at 170°C & leaves at 150°C, while the cold fluid enters at 50°C & leaves at 70°C. The arithmetic mean temperature difference in this case is __________ °C. (A) 20 (B) 60 (C) 120 (D) ∞

Last Answer : (D) ∞

A batch adiabatic reactor at an initial temperature of 373°K is being used for the reaction, A → B. Assume the heat of reaction is - 1kJ/mole at 373°K and heat capacity of both A and B to be constant and equal to 50J/mole.K. The temperature rise after a conversion of 0.5 will be: (A) 5°C (B) 10°C (C) 20°C (D) 100°C

Description : A batch adiabatic reactor at an initial temperature of 373°K is being used for the reaction, A → B. Assume the heat of reaction is - 1kJ/mole at 373°K and heat capacity of both A and B to be constant and equal ... rise after a conversion of 0.5 will be: (A) 5°C (B) 10°C (C) 20°C (D) 100°C

Last Answer : (B) 10°C

A body cools down from 75°C to 70°C in 10 minutes. It will cool down from 70° C to 65° C in __________ minutes. (A) 10 (B) > 10 (C) < 10 (D) Either (B) or (C), depends on the mass of the body

Description : A body cools down from 75°C to 70°C in 10 minutes. It will cool down from 70° C to 65° C in __________ minutes. (A) 10 (B) > 10 (C) < 10 (D) Either (B) or (C), depends on the mass of the body

Last Answer : (B) > 10

The stone ware sewers A. Are used for carrying sewage and drainage from houses B. Are manufactured from clays and shale C. After casting are dried and burnt at temperature 150°C, 700°C and 1200°C D. All the above

Description : The stone ware sewers A. Are used for carrying sewage and drainage from houses B. Are manufactured from clays and shale C. After casting are dried and burnt at temperature 150°C, 700°C and 1200°C D. All the above

Last Answer : ANS: D

Operating condition in the electrical dehydrators for crude oil is about (A) 6.5 kgf/Cm2 & 95°C (B) 1 atm. & 110 °C (C) 20 kgf/cm2 & 110°C (D) 50 atm. and 150°C

Description : Operating condition in the electrical dehydrators for crude oil is about (A) 6.5 kgf/Cm2 & 95°C (B) 1 atm. & 110 °C (C) 20 kgf/cm2 & 110°C (D) 50 atm. and 150°C

Last Answer : (A) 6.5 kgf/Cm2 & 95°C

Which of the following metals cannot be hot worked at room temperature? (A) Zinc (B) Nickel (C) Lead (D) Tin

Description : Which of the following metals cannot be hot worked at room temperature? (A) Zinc (B) Nickel (C) Lead (D) Tin

Last Answer : Option B

Oil of Wintergreen (Methyl salicylate) is obtained by treating salicylic acid with (a) Methane at 150°C (b) CH3OH and conc. H2SO4 (c) Methyl chloride (d) NaOH and then CH3OH

Description : Oil of Wintergreen (Methyl salicylate) is obtained by treating salicylic acid with (a) Methane at 150°C (b) CH3OH and conc. H2SO4 (c) Methyl chloride (d) NaOH and then CH3OH

Last Answer : CH3OH and conc. H2SO4

Benzene reacts with H2 at 150°C at 30 atm in the presence of Ni catalyst to give (a) Cyclohexane (b) Cyclohexene (c) n-Hexane (d) No reaction occurs

Description : Benzene reacts with H2 at 150°C at 30 atm in the presence of Ni catalyst to give (a) Cyclohexane (b) Cyclohexene (c) n-Hexane (d) No reaction occurs

Last Answer : Cyclohexane

Water vapor at 100 KPa and 150°C is compressed isothermally until half the vapor has condensed. How much work must be performed on the steam in this compression process per kilogram?  a) -1384.7 kJ  b) 1384.7 kJ  c) -2384.7 kJ  d) 2384.7 kJ

Description : Water vapor at 100 KPa and 150°C is compressed isothermally until half the vapor has condensed. How much work must be performed on the steam in this compression process per kilogram?  a) -1384.7 kJ  b) 1384.7 kJ  c) -2384.7 kJ  d) 2384.7 kJ

Last Answer : -1384.7 kJ

When welding medium carbon steel plates over 100mm in thickness would the basic electrodes require any pre treatment before use? a) None if they were in a vacuum pack opened 8 hours prior to use b) None if they were in a sealed vacuum pack prior to use c) Heat to 500 °C for 2 hours if used outside d) Baked at 150°C for 4hours prior to use

Description : When welding medium carbon steel plates over 100mm in thickness would the basic electrodes require any pre treatment before use? a) None if they were in a vacuum pack opened 8 hours prior to use b) None if ... ) Heat to 500 °C for 2 hours if used outside d) Baked at 150°C for 4hours prior to use

Last Answer : b) None if they were in a sealed vacuum pack prior to use

Pick out the wrong statement. (A) Lead can creep under its own weight at room temperature (B) The electrical conductivity of gold is considerably reduced by alloying additions due to the decrease in electron movement (C) Recrystallisation temperature decreases with decrease in strain in a cold worked metal (D) With increase in temperature, the electrical conductivity of intrinsic semi-conductor will increase

Description : Pick out the wrong statement. (A) Lead can creep under its own weight at room temperature (B) The electrical conductivity of gold is considerably reduced by alloying additions due to ... metal (D) With increase in temperature, the electrical conductivity of intrinsic semi-conductor will increase

Last Answer : (C) Recrystallisation temperature decreases with decrease in strain in a cold worked metal

A hot liquid is kept in a big room. The logarithm of the numerical valueof the temperature difference between the liquid and the room is plottedagainst time. The plot will be very nearly a/an(A) Ellipse(B) Straight line(C) Parabola(D) Circular arc

Description : A hot liquid is kept in a big room. The logarithm of the numerical valueof the temperature difference between the liquid and the room is plotted against time. The plot will be very nearly a/an (A) Ellipse (B) Straight line (C) Parabola (D) Circular arc

Last Answer : (B) Straight line

Which of the following parameters is not responsible for the heat loss from a hot steam carrying bare pipe surface located in a room without fans? (A) Emissivity of pipe surface (B) Diameter & length of the pipe (C) Temperature of hot pipe surface & that of air in the room (D) None of thes

Description : Which of the following parameters is not responsible for the heat loss from a hot steam carrying bare pipe surface located in a room without fans? (A) Emissivity of pipe surface (B) Diameter & length of the pipe (C) Temperature of hot pipe surface & that of air in the room (D) None of thes

Last Answer : Option D

I was carried into a dark room, and set on fire. I wept, and then my head was cut off. What am I? -Riddles

Description : I was carried into a dark room, and set on fire. I wept, and then my head was cut off. What am I? -Riddles

Last Answer : A Candle.

Which one of the following is the correct statement for respiration in humans? (a) Cigarette smoking may lead to inflammation of bronchi. (b) Neural signals from pneumotoxic centre in pons region of brain can increase the duration of inspiration. (c) Workers in grinding and stone-breaking industries may suffer from lung fibrosis. (d) About 90% of carbon dioxide (CO2) is carried by haemoglobin as carbamino-haemoglobin.

Description : Which one of the following is the correct statement for respiration in humans? (a) Cigarette smoking may lead to inflammation of bronchi. (b) Neural signals from pneumotoxic centre in pons region ... . (d) About 90% of carbon dioxide (CO2) is carried by haemoglobin as carbamino-haemoglobin.

Last Answer : (c) Workers in grinding and stone-breaking industries may suffer from lung fibrosis.

Which one of the following is the correct statement for respiration in humans ? (1) About 90% of carbon dioxide (CO2 ) is carried by haemoglobin as carbamino-haemoglobin (2) Cigarette smoking may lead to inflammation of bronchi (3) Neural signals from pneumotoxic centre in pons region of brain can increase the duration of inspiration (4) Workers in grinding and stone-breaking industries may suffer, from lung fibrosis.

Description : Which one of the following is the correct statement for respiration in humans ? (1) About 90% of carbon dioxide (CO2 ) is carried by haemoglobin as carbamino-haemoglobin (2) Cigarette smoking ... of inspiration (4) Workers in grinding and stone-breaking industries may suffer, from lung fibrosis.

Last Answer : (4) Workers in grinding and stone-breaking industries may suffer, from lung fibrosis.

At room temperature, the metal that remains liquid is: (1) Mercury (2) Platinum (3) Lead (4) Zinc

Description : At room temperature, the metal that remains liquid is: (1) Mercury (2) Platinum (3) Lead (4) Zinc

Last Answer : (1) Mercury Explanation: Mercury is the only metal that is a liquid at normal temperatures and pressure. At room temperatureand pressure, mercury neither readily share valence electrons with other atoms nor ... Infact, mercury is the only metal that doesn't form diatomic molecules in the has phase.

Which one of the following elements exists in liquid state at room temperature? (1) Mercury (2) Lead (3) Sodium (4) Calcium

Description : Which one of the following elements exists in liquid state at room temperature? (1) Mercury (2) Lead (3) Sodium (4) Calcium

Last Answer : (1) Mercury Explanation: Mercury is a dense, silvery dblock element. It is the only metal that is liquid at standard conditions for temperature and pressure.

Which metallic element is liquid at room temperature? A. Zinc B. Nickel C. Lead D. Mercury (Answer)

Description : Which metallic element is liquid at room temperature? A. Zinc B. Nickel C. Lead D. Mercury (Answer)

Last Answer : D. Mercury (Answer)

If I fill a 5 Gallon glass water bottle with very hot water will it change the temperature in a cool room by a few degrees?

Description : If I fill a 5 Gallon glass water bottle with very hot water will it change the temperature in a cool room by a few degrees?

Last Answer : 5 gallons? that should radiate some heat at least. The water won’t stay hot for long though.

The room temperature is hot. Here the hot (use of linguistic variable is used) can be represented by _______ a) Fuzzy Set b) Crisp Set c) Fuzzy & Crisp Set d) None of the mentioned

Description : The room temperature is hot. Here the hot (use of linguistic variable is used) can be represented by _______ a) Fuzzy Set b) Crisp Set c) Fuzzy & Crisp Set d) None of the mentioned

Last Answer : a) Fuzzy Set

The room temperature is hot. Here the hot (use of linguistic variable is used) can be represented by _______ . a) Fuzzy Set b) Crisp Set

Description : The room temperature is hot. Here the hot (use of linguistic variable is used) can be represented by _______ . a) Fuzzy Set b) Crisp Set

Last Answer : a) Fuzzy Set

Due to which of the following reasons the cables should not be operated too hot ? (a) The oil may loose its viscosity and it may start drawing off from higher levels (b) Expansion of the oil may cause the sheath to burst (c) Unequal expansion may create voids in the insulation which will lead to ionization (d) The thermal instability may rise due to the rapid increase of dielectric losses with temperature (e) All of the above

Description : Due to which of the following reasons the cables should not be operated too hot ? (a) The oil may loose its viscosity and it may start drawing off from higher levels (b) Expansion of the ... instability may rise due to the rapid increase of dielectric losses with temperature (e) All of the above

Last Answer : (e) All of the above

Condensation polymerisation of caprolactam is carried out in the reactor maintained at a temperature of __________ °C for producing nylon- 6. (A) -20 to 25 (B) 50 to 75 (C) 100 to 150 (D) 250-280

Description : Condensation polymerisation of caprolactam is carried out in the reactor maintained at a temperature of __________ °C for producing nylon- 6. (A) -20 to 25 (B) 50 to 75 (C) 100 to 150 (D) 250-280

Last Answer : (D) 250-280

Drying operation under vacuum is carried out to (A) Dry those materials which have very high unbound moisture content (B) Reduce drying temperature (C) Increase drying temperature (D) Dry materials having high bound moisture content

Description : Drying operation under vacuum is carried out to (A) Dry those materials which have very high unbound moisture content (B) Reduce drying temperature (C) Increase drying temperature (D) Dry materials having high bound moisture content

Last Answer : (B) Reduce drying temperature

Condensing film co-efficient for steam on horizontal tubes ranges from 5000 to 15000 Kcal/hr.m2 .°C. Condensation of vapor is carried out inside the tube in a shell and tube heat exchanger, when the (A) Higher condensing film co-efficient is desired (B) Condensate is corrosive in nature (C) Lower pressure drop through the exchanger is desired (D) Temperature of the incoming vapor is very high Answer: Option B

Description : Condensing film co-efficient for steam on horizontal tubes ranges from 5000 to 15000 Kcal/hr.m2 .°C. Condensation of vapor is carried out inside the tube in a shell and tube heat ... drop through the exchanger is desired (D) Temperature of the incoming vapor is very high

Last Answer : (B) Supersaturated

A reversible liquid phase endothermic reaction is to be carried out in a plug flow reactor. For minimum reactor volume, it should be operated such that the temperature along the length (A) Decreases (B) Increases (C) Is at the highest allowable temperature throughout (D) First increases and then decreases

Description : A reversible liquid phase endothermic reaction is to be carried out in a plug flow reactor. For minimum reactor volume, it should be operated such that the temperature along the length (A) ... Increases (C) Is at the highest allowable temperature throughout (D) First increases and then decreases

Last Answer : (C) Is at the highest allowable temperature throughout

An irreversible first order reaction is being carried out in a CSTR and PFR of same volume. The liquid flow rates are same. The relative conversion will (A) Be more in CSTR than in PFR (B) Be more in PFR than in CSTR (C) Be same in both cases (D) Depend on the temperature

Description : An irreversible first order reaction is being carried out in a CSTR and PFR of same volume. The liquid flow rates are same. The relative conversion will (A) Be more in CSTR than in PFR (B) Be more in PFR than in CSTR (C) Be same in both cases (D) Depend on the temperature

Last Answer : (B) Be more in PFR than in CSTR

An isentropic process is carried out at constant (A) Volume (B) Pressure (C) Temperature (D) All (A), (B) and (C)

Description : An isentropic process is carried out at constant (A) Volume (B) Pressure (C) Temperature (D) All (A), (B) and (C)

Last Answer : (A) Volume

Velocity of a reaction depends upon the (A) Nature of the reactants (B) Concentration of the reactants (C) Temperature at which the reaction is carried (D) All (A), (B) and (C)

Description : Velocity of a reaction depends upon the (A) Nature of the reactants (B) Concentration of the reactants (C) Temperature at which the reaction is carried (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

For a thermodynamic process to be reversible, the temperature difference between hot body and working substance should be  (a) zero  (b) minimum  (d) maximum  (d) infinity  (e) there is no such criterion.

Description : For a thermodynamic process to be reversible, the temperature difference between hot body and working substance should be  (a) zero  (b) minimum  (d) maximum  (d) infinity  (e) there is no such criterion.

Last Answer : Answer : a

In order that a cycle be reversible, following must be satisfied  (a) free expansion or friction resisted expansion/compression process should not be encountered  (b) when heat is being absorbed, temperature of hot source and working sub¬stance should be same  (c) when beat is being rejected, temperature of cold source and working sub-stance should be same  (d) all of the above  (e) none of the above.

Description : In order that a cycle be reversible, following must be satisfied  (a) free expansion or friction resisted expansion/compression process should not be encountered  (b) when heat is being absorbed, temperature of hot ... sub-stance should be same  (d) all of the above  (e) none of the above.

Last Answer : Answer : d

Consider the reaction: `N_(2) + 3H_(2) hArr 2NH_(3)` carried out at constant pressure and temperature. If `DeltaH` and `DeltaU` are change in enthalpy

Description : Consider the reaction: `N_(2) + 3H_(2) hArr 2NH_(3)` carried out at constant pressure and temperature. If `DeltaH` and `DeltaU` are change in enthalpy

Last Answer : Consider the reaction: `N_(2) + 3H_(2) hArr 2NH_(3)` carried out at constant pressure and temperature. If ` ... Delta H = 0` D. `Delta H = Delta U`

Do You Know How Is Automatic Reference Junction Compensation Carried Out In Temperature Recorders?

Description : Do You Know How Is Automatic Reference Junction Compensation Carried Out In Temperature Recorders?

Last Answer : In automatic reference junction compensation, variable nickel resistor is used. As the temperature changes, so does its resistance. This reference junction compensator is located, so that it will be ... the thermocouple is rejoined. This joint is invariably at the terminal strip of the instrument.

How Is Automatic Reference Junction Compensation Carried Out In Temperature Recorders?

Description : How Is Automatic Reference Junction Compensation Carried Out In Temperature Recorders?

Last Answer : In automatic reference junction compensation, variable nickel resistor is used. As the temperature changes, so does its resistance. This reference junction compensator is located, so that it will be ... the thermocouple is rejoined. This joint is invariably at the terminal strip of the instrument.

You and a your friend are trapped in a room. There are two exists (a+b). a) One exist leads to a roaring Inferno with a thin bridge crossing to the other side, but there is a risk that it will fall. b) The other lead to lions which have been satrved for 2 months, so they will eat you and your friend on the spot. Which exist is the safest for you and your friend? -Riddles

Description : You and a your friend are trapped in a room. There are two exists (a+b). a) One exist leads to a roaring Inferno with a thin bridge crossing to the other side, but there is a risk that it will ... will eat you and your friend on the spot. Which exist is the safest for you and your friend? -Riddles

Last Answer : B is the safest. Taking exist A might gurantee your saftey but not your friend as it will probaby fall under your weight. On the other hand the lion have been starved for two months which probably means they are dead.

A lead-acid battery may become hotter than normal during a charge if the _________. A. battery has a shorted cell B. charging voltage is too low C. specific gravity is too high D. battery room door is secured

Description : A lead-acid battery may become hotter than normal during a charge if the _________. A. battery has a shorted cell B. charging voltage is too low C. specific gravity is too high D. battery room door is secured

Last Answer : Answer: A

In cold working of metal as compared to its hot working (A) Cracks and blow holes are eliminated (B) Ductility and impact strength improves (C) Appreciable strain hardening is produced (D) Yield stress, hardness and fatigue strength is not at all affected

Description : In cold working of metal as compared to its hot working (A) Cracks and blow holes are eliminated (B) Ductility and impact strength improves (C) Appreciable strain hardening is produced (D) Yield stress, hardness and fatigue strength is not at all affected

Last Answer : (C) Appreciable strain hardening is produced

Hot & cold working of material causes its __________ deformation. (A) Visco-elastic (B) Isotropic (C) Elastic (D) Plastic

Description : Hot & cold working of material causes its __________ deformation. (A) Visco-elastic (B) Isotropic (C) Elastic (D) Plastic

Last Answer : (D) Plastic

Normalising of an object does not (A) Refine coarse grain structure obtained during hot working (B) Improve ductility (C) Improve yield strength (D) Improve mechanical properties

Description : Normalising of an object does not (A) Refine coarse grain structure obtained during hot working (B) Improve ductility (C) Improve yield strength (D) Improve mechanical properties

Last Answer : (B) Improve ductility

What kind of room or setting does a residential, indoor spa or hot tub belong?

Description : What kind of room or setting does a residential, indoor spa or hot tub belong?

Last Answer : Wherever you put it, be sure there's plenty of ventilation and that the room can handle the humidity or you're going to have a layer of black mold growing over everything in your room. If ... soaking/relaxing/contemplating in a hot tub at night is among the most sublime of life's small pleasures.

Why isn't the hot air leaving my apartment even with a window open in the bedroom and living room wide open?

Description : Why isn't the hot air leaving my apartment even with a window open in the bedroom and living room wide open?

Last Answer : answer:You need some sort of circulation otherwise the hot air is just going to sit there. My room has horrible circulation so what I did was set up one fan my my window blowing out and another by ... . Yes, I approached this problem from a nerdy standpoint thinking of my room as a big computer :P

Why does a room feel like it's cooler on a hot day when the lights are off?

Description : Why does a room feel like it's cooler on a hot day when the lights are off?

Last Answer : Lights -> sun -> heat. Of course, if you’re using lots of incandescent bulbs, the room actually will be warmer/cooler.

How to keep a room cool in hot-humid weather without air conditioning (science!)

Description : How to keep a room cool in hot-humid weather without air conditioning (science!)

Last Answer : I keep my windows open and use a fan,blinds lowered.

Do solar curtains actually work and cool off a hot room facing the sun?

Description : Do solar curtains actually work and cool off a hot room facing the sun?

Last Answer : answer:They seem to. Here are some comments: It cut the Houston Texas heat in the bedroom 8 eight degrees from 80 to 72 in the early morning sunrise, you did not wake up early, because you ... made a world of difference. Keeps the sun/heat out making the kitchen about 10 degrees cooler. Source