A body cools down from 75°C to 70°C in 10 minutes. It will cool down from 70° C to 65° C in __________ minutes. (A) 10 (B) > 10 (C) < 10 (D) Either (B) or (C), depends on the mass of the body

A body cools down from 75°C to 70°C in 10 minutes. It will cool down
from 70° C to 65° C in __________ minutes.
(A) 10
(B) > 10
(C) < 10
(D) Either (B) or (C), depends on the mass of the body
by

1 Answer

Answer :

(B) > 10
by

Related questions

In a cup, tea cools from 90°C to 80°C in exactly one minute. It will cool from 70°C to 60°C in (a) less than one minute (b) exactly one minute (c) nearly one minute (d) more than one minute

Description : In a cup, tea cools from 90°C to 80°C in exactly one minute. It will cool from 70°C to 60°C in (a) less than one minute (b) exactly one minute (c) nearly one minute (d) more than one minute

Last Answer : Ans:(d)

or the selection of endospore-forming bacteria, a mixed culture can be heated at A- 80°C for 10 minutes B- 70°C for 10 minutes C- 60°C for 10 minutes D- 90°C for 10 minutes

Description : or the selection of endospore-forming bacteria, a mixed culture can be heated at A- 80°C for 10 minutes B- 70°C for 10 minutes C- 60°C for 10 minutes D- 90°C for 10 minutes

Last Answer : 80°C for 10 minutes

Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure to the air with a wet bulb temperature of 60°C, then both the approach & the range would be 10°C (C) For unsaturated air-water vapor mixture at atmospheric conditions, the wet bulb temperature & adiabatic cooling lines are the same (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Description : Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure ... & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Last Answer : (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

We feel cool when we sit near the fan, this is because – (1) fan gives cool air. (2) an cools surrounding air. (3) air vapourises the sweat on our body. (4) we feel cool when air touches the body.

Description : We feel cool when we sit near the fan, this is because – (1) fan gives cool air. (2) an cools surrounding air. (3) air vapourises the sweat on our body. (4) we feel cool when air touches the body.

Last Answer : (3) air vapourises the sweat on our body. Explanation: We feel comfortable sitting under a fan when we are perspiring because a fan increases the rate of evaporation of sweat (or moisture) from our body and makes us feel cool and comfortable.

We feel cool when we sit near the fan, this is because (1) fan gives cool air. (2) fan cools surrounding air. (3) air vapourises the sweat on our body. (4) we feel cool when air touches the body.

Description : We feel cool when we sit near the fan, this is because (1) fan gives cool air. (2) fan cools surrounding air. (3) air vapourises the sweat on our body. (4) we feel cool when air touches the body.

Last Answer : air vapourises the sweat on our body.

Hot working of lead is carried out at (A) 75°C (B) 373°K (C) 150°C (D) Room temperature

Description : Hot working of lead is carried out at (A) 75°C (B) 373°K (C) 150°C (D) Room temperature

Last Answer : (B) 373°K

A solid aluminium ball, when quenched in a water bath maintained at 40°C, cools down from 550°C to 450°C in 20 seconds. The expected temperature of the ball after next 20 seconds may be about __________ °C. (A) 370 (B) 340 (C) 320 (D) 300

Description : A solid aluminium ball, when quenched in a water bath maintained at 40°C, cools down from 550°C to 450°C in 20 seconds. The expected temperature of the ball after next 20 seconds may be about __________ °C. (A) 370 (B) 340 (C) 320 (D) 300

Last Answer : (A) 370

For every 10°C rise in temperature, the rate of chemical reaction doubles. When the temperature is increased from 30 to 70°C, the rate of reaction increases __________ times. (A) 8 (B) 12 (C) 16 (D) 32

Description : For every 10°C rise in temperature, the rate of chemical reaction doubles. When the temperature is increased from 30 to 70°C, the rate of reaction increases __________ times. (A) 8 (B) 12 (C) 16 (D) 32

Last Answer : (C) 16

In a counter flow heat exchanger, hot fluid enters at 170°C & leaves at 150°C, while the cold fluid enters at 50°C & leaves at 70°C. The arithmetic mean temperature difference in this case is __________ °C. (A) 20 (B) 60 (C) 120 (D) ∞

Description : In a counter flow heat exchanger, hot fluid enters at 170°C & leaves at 150°C, while the cold fluid enters at 50°C & leaves at 70°C. The arithmetic mean temperature difference in this case is __________ °C. (A) 20 (B) 60 (C) 120 (D) ∞

Last Answer : (D) ∞

During hot weather, the fan produces a feeling of comfort. This is because – (1) fan supplies cool air (2) fan cools the air (3) our perspiration evaporates rapidly (4) conductivity of air increases

Description : During hot weather, the fan produces a feeling of comfort. This is because – (1) fan supplies cool air (2) fan cools the air (3) our perspiration evaporates rapidly (4) conductivity of air increases

Last Answer : (3) our perspiration evaporates rapidly Explanation: Fans make the air more comfortable for two reasons: (1) by moving the air, they blow away body heat and evaporate sweat, cooling the body, and (2) they also mix the cooler air near the floor with the warmer air by people's faces.

The basic underlying principle of using a mist propagation system is that it: a. Keeps the propagation medium uniformly moist and supplies moisture to the base of the cuttings b. Keeps the plant material cool c. Cools the propagation medium to promote root formation and development d. Increases humidity around the cutting and reduces transpiration

Description : The basic underlying principle of using a mist propagation system is that it: a. Keeps the propagation medium uniformly moist and supplies moisture to the base of the cuttings b. ... medium to promote root formation and development d. Increases humidity around the cutting and reduces transpiration

Last Answer : Increases humidity around the cutting and reduces transpiration

During hot weather, the fan produces a feeling of comfort. This is because (1) fan supplies cool air (2) fan cools the air (3) our perspiration eva-porates rapidly (4) conductivity of air increases

Description : During hot weather, the fan produces a feeling of comfort. This is because (1) fan supplies cool air (2) fan cools the air (3) our perspiration eva-porates rapidly (4) conductivity of air increases 

Last Answer : our perspiration eva-porates rapidly

धरती पर कितना भाग पानी है? 1. 60° 2. 50° 3. 70°

Description : धरती पर कितना भाग पानी है? 1. 60° 2. 50° 3. 70°

Last Answer : धरती पर काफी कम पानी है। लगभग 71% धरती का समुद्री तट पानी से घिरा हुआ है। इसलिए वह सही विकल्प है कि धरती पर पानी का कुल प्रतिशत लगभग 70% है।

In triangle ABC, angle B =35° , angle C =65° and the bisector of angle BAC meets BC in X. Arrange AX, BX and CX in descending order. -Maths 9th

Description : In triangle ABC, angle B =35° , angle C =65° and the bisector of angle BAC meets BC in X. Arrange AX, BX and CX in descending order. -Maths 9th

Last Answer : NEED ANSWER

In triangle ABC, angle B =35° , angle C =65° and the bisector of angle BAC meets BC in X. Arrange AX, BX and CX in descending order. -Maths 9th

Description : In triangle ABC, angle B =35° , angle C =65° and the bisector of angle BAC meets BC in X. Arrange AX, BX and CX in descending order. -Maths 9th

Last Answer : This answer was deleted by our moderators...

The whole circle bearing of a line is 290°. Its reduced bearing is (A) N 20° E (B) N 20° W (C) N 70° W (D) S 70° E

Description : The whole circle bearing of a line is 290°. Its reduced bearing is  (A) N 20° E (B) N 20° W (C) N 70° W (D) S 70° E

Last Answer : (C) N 70° W

The bearing of AB is 190° and that of CB is 260° 30'. The included angle ABC, is (A) 80° 30' (B) 99° 30' (C) 70° 30' (D) None of these

Description : The bearing of AB is 190° and that of CB is 260° 30'. The included angle ABC, is (A) 80° 30' (B) 99° 30' (C) 70° 30' (D) None of these

Last Answer : (C) 70° 30'

When the width of car parking space and width of street are limited, generally preferred parking system is (A) Parallel parking (B) 45° angle parking (C) 65° angle parking (D) 90° angle parking

Description : When the width of car parking space and width of street are limited, generally preferred parking system is (A) Parallel parking (B) 45° angle parking (C) 65° angle parking (D) 90° angle parking

Last Answer : Answer: Option A

Centre of pressure in an immersed body is __________ the centre of gravity. (A) Above (B) Below (C) At (D) Either above or below; depends on the liquid density

Description : Centre of pressure in an immersed body is __________ the centre of gravity. (A) Above (B) Below (C) At (D) Either above or below; depends on the liquid density

Last Answer : (B) Below

Spent fuel from a nuclear power plant cools down and loses most of its radioactivity through decay. In the first year, spent fuel loses about what percentage of its radioactivity? w) 10 percent x) 50 percent y) 80 percent z) 100 percent

Description : Spent fuel from a nuclear power plant cools down and loses most of its radioactivity through decay. In the first year, spent fuel loses about what percentage of its radioactivity? w) 10 percent x) 50 percent y) 80 percent z) 100 percent

Last Answer : ANSWER: Y -- 80 PERCENT

Pick out the correct statement. (A) A real gas on expansion in vacuum gets heated up (B) An ideal gas on expansion in vacuum gets cooled (C) An ideal gas on expansion in vacuum gets heated up (D) A real gas on expansion in vacuum cools down whereas ideal gas remains unaffected

Description : Pick out the correct statement. (A) A real gas on expansion in vacuum gets heated up (B) An ideal gas on expansion in vacuum gets cooled (C) An ideal gas on expansion in vacuum gets heated up (D) A real gas on expansion in vacuum cools down whereas ideal gas remains unaffected

Last Answer : (D) A real gas on expansion in vacuum cools down whereas ideal gas remains unaffecte

Typical solvent polymerisation reaction conditions for the production of high density polythene by Zeigler process is (A) 7 kgf/cm2 and 70 °C (B) 1000 kgf/cm2 and 100°C (C) 7 kgf/cm2 and 700°C (D) 1 kgf/cm2 (gage) and 70°C

Description : Typical solvent polymerisation reaction conditions for the production of high density polythene by Zeigler process is (A) 7 kgf/cm2 and 70 °C (B) 1000 kgf/cm2 and 100°C (C) 7 kgf/cm2 and 700°C (D) 1 kgf/cm2 (gage) and 70°C

Last Answer : (A) 7 kgf/cm2 and 70 °C

How much heat energy will be lost by a 200 gram mass of water as it cools from 40 C to 35C?

Description : How much heat energy will be lost by a 200 gram mass of water as it cools from 40 C to 35C?

Last Answer : You need to multiply together all of the following:* The mass ingrams* The temperature difference* The specific heat of water

What might happen next when an air mass cools to the point where it becomes saturated?

Description : What might happen next when an air mass cools to the point where it becomes saturated?

Last Answer : Precipitation

What color cup of tea cools down quickly ?

Description : What color cup of tea cools down quickly ?

Last Answer : Tea in a black cup cools quickly.

What happens when vapour if it water cools down?

Description : What happens when vapour if it water cools down?

Last Answer : The water vapour (often known as steam) is caused by bringing the liquid water to boiling point. When the water vapour cools it condenses back into liquid water.

How will a molded-case circuit breaker react after it has tripped, as a result of an overloaded circuit? A. The breaker will trip again if immediately reset. B. The breaker handle will lock in the OFF position. C. The breaker handle will lock in the tripped position until the thermal element cools down. D. The breaker handle cannot be moved to the OFF position until the thermal element cools down.

Description : How will a molded-case circuit breaker react after it has tripped, as a result of an overloaded circuit? A. The breaker will trip again if immediately reset. B. The breaker handle will lock in ... down. D. The breaker handle cannot be moved to the OFF position until the thermal element cools down.

Last Answer : Answer: A

Consider the diurnal (daily) cycle of temperature at the surface. Why is the tem- perature maximum in the mid-to-late afternoon? (a) There is a net energy gain at the surface from dawn to mid- afternoon. (b) Clouds form in mid-to-late afternoon, cutting down the solar heating and cooling the surface. (c) The intensity of solar radiation is at a maximum at this time. (d) Late in the day, evaporation from the surface increases and this cools the surface.

Description : Consider the diurnal (daily) cycle of temperature at the surface. Why is the tem- perature maximum in the mid-to-late afternoon? (a) There is a net energy gain at the surface from dawn to mid- ... this time. (d) Late in the day, evaporation from the surface increases and this cools the surface.

Last Answer : There is a net energy gain at the surface from dawn to mid- afternoon.

How would you maintain good association with such a colleague who is clear in heart but very aggressive in behaviour? Options: A) You restrict your personal relations B) You maintain relations but whenever he cools down, tell him his mistakes politely C) You snap your relations D) You maintain personalized relations

Description : How would you maintain good association with such a colleague who is clear in heart but very aggressive in behaviour? Options: A) You restrict your personal relations B) You maintain relations ... tell him his mistakes politely C) You snap your relations D) You maintain personalized relations

Last Answer : B) You maintain relations but whenever he cools down, tell him his mistakes politely

Thermal algae can live in: (a) Saline soil (b) Hot water streams of 70°C (C) Deserts (d) Snow balls

Description : Thermal algae can live in: (a) Saline soil (b) Hot water streams of 70°C (C) Deserts (d) Snow balls

Last Answer : Ans. ((b))

The insulation resistance of a DC motor is observed to be 15 MΩ at a temp. of 70°C. what is its value corrected to 40°C. the correction factor for 70°C is 8.0.

Description : The insulation resistance of a DC motor is observed to be 15 MΩ at a temp. of 70°C. what is its value corrected to 40°C. the correction factor for 70°C is 8.0. 

Last Answer : Observed resistance at 70°C – 15 MΩ. Temperature correction factor – 8. Rm = kt * Rt           kt – correction factor. Rm = 8 * 15          Rt – resistance measured at +°C. Rm = 120 MΩ.       Rm – corrected value to 40°C The IR of DC motor corrected to 40°C is 120 MΩ. 

40 optimum working temperature for diesel engine is about ∙ 88-90°c ∙ 71-82°c ∙ 60-70°c ∙ 90-100°c

Description : 40 optimum working temperature for diesel engine is about ∙ 88-90°c ∙ 71-82°c ∙ 60-70°c ∙ 90-100°c

Last Answer : ∙ 88-90°c

ptimum working temperature for petrol engine is about ∙ 88-90°c ∙ 71-82°c ∙ 60-70°c ∙ 90-100°c

Description : ptimum working temperature for petrol engine is about ∙ 88-90°c ∙ 71-82°c ∙ 60-70°c ∙ 90-100°c

Last Answer : ∙ 71-82°c

Equal volumes of aniline and diesel oil when mixed at room temperature (during summer) was found to be completely miscible. It means that the aniline point of the diesel is __________ the room temperature. (A) More than (B) Less than (C) Same as (D) Either more or less; depends on the room temperature

Description : Equal volumes of aniline and diesel oil when mixed at room temperature (during summer) was found to be completely miscible. It means that the aniline point of the diesel is __________ the room temperature. (A) ... (B) Less than (C) Same as (D) Either more or less; depends on the room temperature

Last Answer : (C) Same as

In case of an unsaturated mixture of gas and vapor, the percentage saturation is __________ its relative saturation. (A) Lower than (B) Higher than (C) Equal to (D) Either (A) or (B), depends on the mixture composition

Description : In case of an unsaturated mixture of gas and vapor, the percentage saturation is __________ its relative saturation. (A) Lower than (B) Higher than (C) Equal to (D) Either (A) or (B), depends on the mixture composition

Last Answer : (A) Lower than

Bound moisture is that liquid which exerts an equilibrium vapor pressure __________ that of the pure liquid at the given temperature. (A) Less than (B) More than (C) Equal to (D) Either (A) or (B); depends on the solid

Description : Bound moisture is that liquid which exerts an equilibrium vapor pressure __________ that of the pure liquid at the given temperature. (A) Less than (B) More than (C) Equal to (D) Either (A) or (B); depends on the solid

Last Answer : (A) Less than

For the flow of gases through a capillary, with increase in temperature, the permeability __________ as per Knudsen law. (A) Increases (B) Decreases (C) Remain same (D) Either (A) or (B); depends on the gas

Description : For the flow of gases through a capillary, with increase in temperature, the permeability __________ as per Knudsen law. (A) Increases (B) Decreases (C) Remain same (D) Either (A) or (B); depends on the gas

Last Answer : (A) Increases

In an absorption column, the flooding velocity for random packing is __________ that for stacked/regular packing. (A) Greater than (B) Smaller than (C) Equal to (D) Either (A), or (B); depends on the type of packing

Description : In an absorption column, the flooding velocity for random packing is __________ that for stacked/regular packing. (A) Greater than (B) Smaller than (C) Equal to (D) Either (A), or (B); depends on the type of packing

Last Answer : (B) Smaller than

Ignition temperature of a fuel in air is __________ that in pure oxygen. (A) More than(B) Less than(C) Equal to(D) Either more or less; depends on the type of fuel

Description : Ignition temperature of a fuel in air is __________ that in pure oxygen. (A) More than (B) Less than (C) Equal to (D) Either more or less; depends on the type of fuel

Last Answer : (A) More than

Gross heating value of coal is __________ the net heating value. (A) Higher than (B) Lower than (C) Same as (D) Either (A) or (B); depends on the type of coal

Description : Gross heating value of coal is __________ the net heating value. (A) Higher than (B) Lower than (C) Same as (D) Either (A) or (B); depends on the type of coal

Last Answer : (A) Higher than

A catalyst in a chemical reaction __________ free energy change in the reaction. (A) Increases (B) Decreases (C) Either (A) or (B); depends on the type of catalyst (D) Neither (A) nor (B)

Description : A catalyst in a chemical reaction __________ free energy change in the reaction. (A) Increases (B) Decreases (C) Either (A) or (B); depends on the type of catalyst (D) Neither (A) nor (B)

Last Answer : (C) Either (A) or (B); depends on the type of catalyst

When all the limiting reactant is consumed in the reaction, the operational yield __________ the relative yield. (A) Is greater than (B) Is smaller than (C) Equals (D) Can be either greater or smaller than (depends on the type of reaction)

Description : When all the limiting reactant is consumed in the reaction, the operational yield __________ the relative yield. (A) Is greater than (B) Is smaller than (C) Equals (D) Can be either greater or smaller than (depends on the type of reaction)

Last Answer : (C) Equals

Recycling back of outlet stream to the reactor from an ideal CSTR carrying out a first order liquid phase reaction will result in __________ in conversion. (A) Decrease (B) Increase (C) No change (D) Either (A) or (B), depends on the type of reaction

Description : Recycling back of outlet stream to the reactor from an ideal CSTR carrying out a first order liquid phase reaction will result in __________ in conversion. (A) Decrease (B) Increase (C) No change (D) Either (A) or (B), depends on the type of reaction

Last Answer : (C) No change

The equilibrium constant of chemical reaction __________ in the presence of catalyst. (A) Increases (B) Decreases (C) Remain unaffected (D) Can either increase or decrease (depends on the type of catalyst)

Description : The equilibrium constant of chemical reaction __________ in the presence of catalyst. (A) Increases (B) Decreases (C) Remain unaffected (D) Can either increase or decrease (depends on the type of catalyst)

Last Answer : (C) Remain unaffected

The partial pressure of each constituent present in an alloy is __________ the total vapor pressure exerted by the alloy. (A) Less than (B) Equal to (C) More than (D) Either (B) or (C); depends on the type of alloy

Description : The partial pressure of each constituent present in an alloy is __________ the total vapor pressure exerted by the alloy. (A) Less than (B) Equal to (C) More than (D) Either (B) or (C); depends on the type of alloy

Last Answer : (A) Less than

The size of the tetrahedral void in the closest packing of atoms is __________ that of the octahedral void. (A) Equal to (B) Greater than (C) Less than (D) Either (A), (B) or (C); depends on the size of atom

Description : The size of the tetrahedral void in the closest packing of atoms is __________ that of the octahedral void. (A) Equal to (B) Greater than (C) Less than (D) Either (A), (B) or (C); depends on the size of atom

Last Answer : (C) Less than

Overall rate of reaction in a heterogeneous catalytic reaction depends upon the mass and energy transfer from the fluid to solid surface and its rate of reaction is usually __________ the concentration of catalyst, if it doesnot entail a chain mechanism.(A) Proportional to(B) Independent of(C) Inversely proportional to(D) Proportional to the square o

Description : Overall rate of reaction in a heterogeneous catalytic reaction depends upon the mass and energy transfer from the fluid to solid surface and its rate of reaction is usually __________ the concentration of ... to (B) Independent of (C) Inversely proportional to (D) Proportional to the square o

Last Answer : (A) Proportional to

Where can one find a portable fan (about 10" or so) that blows either warm or cool air?

Description : Where can one find a portable fan (about 10" or so) that blows either warm or cool air?

Last Answer : Why does it need to blow hot air also if you need it to cool?

When the sun sets which material would cool down the fastest assuming they all have the same mass and initial temperature?

Description : When the sun sets which material would cool down the fastest assuming they all have the same mass and initial temperature?

Last Answer : You would ALSO have to assume that the materials have the sameshape.The material that cools down fastest would be the one thathas the least specific heat capacity.

Binary distillation involves the mass transfer by __________ at the gas￾liquid interface. (A) Unidirectional diffusion from liquid to gas phase (B) Unidirectional diffusion from gas to liquid phase (C) Either 'a' or 'b' (D) A counter diffusion at an almost equal molar rate

Description : Binary distillation involves the mass transfer by __________ at the gas￾liquid interface. (A) Unidirectional diffusion from liquid to gas phase (B) Unidirectional diffusion from gas to liquid phase (C) Either 'a' or 'b' (D) A counter diffusion at an almost equal molar rate

Last Answer : (D) A counter diffusion at an almost equal molar rate