Description : Ultra centrifuges are used for the separation of __________ solid particles. (A) Coarse (B) Fine (C) Colloidal (D) Dissolved
Last Answer : (C) Colloidal
Description : The hardenability of steel decreases with (A) Decrease in dislocation density (B) Increase in solutionising temperature (C) Increase in strength (D) Decrease in grain size
Last Answer : D) Decrease in grain size
Description : Maximum hardenability of steel depends upon its (A) Chemical composition (B) Carbon content (C) Grain size (D) Alloying elements content
Last Answer : Option D
Description : Secondary hardening in steels arises out of the (A) Precipitation of fine alloy carbides at high temperatures (B) Refinement of ferrite grain size by working (C) Decomposition of retained austenite upon heat treatment (D) Precipitation of complex inter-metallic upon heat treatment
Last Answer : Option C
Description : Maraging steels derive their strength from the following mechanism: (A) A fine, highly dislocated and strong martensite (B) Fine dispersions of inter-metallic of Fe, Ni, Ti etc (C) Fine ... alloy carbides in a ferrite matrix (D) Fine dispersions of Fe3 C nucleated on dislocations in austenite
Last Answer : Option A
Description : Cold work tool steel should have (A) High toughness (B) Poor hardenability (C) High wear resistance (D) All (A), (B) & (C)
Last Answer : (C) High wear resistance
Description : High speed steel should have high (A) Toughness (B) Wear resistance (C) Hardenability (D) Both (B) & (C)
Last Answer : (D) Both (B) & (C)
Description : Colloidal mills are used for __________ grinding. (A) Coarse (B) Intermediate (C) Fine (D) Ultrafine
Last Answer : (D) Ultrafine
Description : Wet sieving is employed, when the product contains __________ materials. (A) Abrasive (B) Large quantity of very fine (C) Coarse (D) Non-sticky
Last Answer : (B) Large quantity of very fine
Description : Grizzlies are used for separating __________ solids. (A) Coarse (B) Fine (C) Any size (D) None of these
Last Answer : (B) Fine
Description : __________ are used for the separation of coarse particles from a slurry of fine particles. (A) Thickeners (B) Classifiers (C) Hydrocyclones (D) Decanters
Last Answer : (B) Classifiers
Description : Austempering of steel requires it to be heated to 875°C followed by sudden cooling to 250-525°C, thereby changing austenite to (A) Sorbite (B) Bainite (C) Martensite (D) Troostite
Last Answer : (B) Bainite
Description : Cold cracking in the heat affected zone of a high strength steel weld can take place because of the (A) Retained austenite (B) Martensite formation (C) Relatively high sulphur content in the base metal (D) Sufficient hydrogen present in the welding arc
Last Answer : (B) Martensite formation
Description : Sub zero treatment of steel is done to (A) Suppress martensite transformation (B) Enhance its working performance in sub zero atmosphere (C) Reduce the retained austenite in hardened steel (D) Induce temper brittleness after its hardening
Description : Bucket elevators are not suitable for the vertical lifting of __________ materials. (A) Fine (e.g. - 200 mesh size coal) (B) Sticky (e.g. clay paste) (C) Small lumpy (e.g. grains and sand) (D) Free flowing
Last Answer : (B) Sticky (e.g. clay paste
Description : Alloying elements present in Haynes stellite, which has superior performance than high speed steel, are: (A) Nickel, cobalt & chromium (B) Tungsten, chromium & cobalt (C) Manganese, chromium & cobalt (D) Tungsten, molybdenum & nickel
Last Answer : Option B
Description : What are coarse grains? Why are they important in India? Name the crops which are included in this category and name three leading states producing each of these crops. -Geography 10th
Last Answer : Millets are called coarse grains. They are important because they have high nutritional value and make an important part of the diet for poor people. Most important millets are as follows: ... soils. Rajasthan is the largest producer followed by Uttar Pradesh, Maharashtra, Gujarat and Haryana.
Description : Which of the following is incorrect? (a) Red soils are rich in iron (b) Black soils are rich in phosphorus nitrogen and organic matter (c) Alluvial soils are rich in potash but poor in phosphorus (d) Red soils are suitable for cultivation of pulses and coarse grains
Last Answer : Ans: (b)
Description : Green Revolution in India has so far been most successful in case of– (1) sugarcane (2) coarse grains (3) wheat (4) rice
Last Answer : (3) wheat Explanation: The novel technological development of the Green Revolution was the production of novel wheat cultivars. Agronomists bred cultivars of maize, wheat, and rice that are generally referred ... Indian peasants for wheat, which did not make up a large portion of the peasant diet.
Description : You are given a sample of soil containing coarse grains to determine its water content, you will use (A) Pycnometer (B) Oven-drying method (C) Calcium carbide method (D) Alcohol method
Last Answer : Answer: Option A
Description : Pick up the correct statement from the following: (A) Sand consists of coarse particles of silica formed due to the disintegration of rocks (B) The grains of sand are not affected by frost (C) Sand ... and do not allow water to rise up between pores due to capillary action (D) All the above
Last Answer : Answer: Option D
Description : Transformation range for ferrous material is the temperature interval during which __________ is formed during its heating. (A) Cementite (B) Austenite (C) Martensite (D) Pearlite
Description : Ball mill is used for (A) Crushing (B) Coarse grinding (C) Fine grinding (D) Attrition
Last Answer : (C) Fine grinding
Description : In case of a ball mill, (A) Coarse feed requires a larger ball (B) Fine feed requires a larger ball (C) Operating speed should be more than the critical speed (D) None of these
Last Answer : (A) Coarse feed requires a larger ball
Description : Pick out the wrong statement pertaining to leaching. (A) Fine solids cannot be leached in a Pachuca tank (B) Door classifier can be used for leaching of coarse solids (C) Vegetable seeds can be ... , Rotocel or Kennedy extractor (D) Very high temperature is not needed for the leaching of sugar beet
Last Answer : (A) Fine solids cannot be leached in a Pachuca tank
Description : At a given temperature, the volume of a gas dissolved in a solvent __________ with increase in pressure. (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the gas
Last Answer : C) Remains unchanged
Description : __________ can replace tungsten in high speed steel, (A) Chromium (B) Vanadium (C) Cobalt (D) Molybdenum
Last Answer : (D) Molybdenum
Description : Addition of __________ to the steel helps in increasing the residual magnetism in steel used for making magnets. (A) Chromium (B) Nickel (C) Tungsten (D) Cobalt
Last Answer : (D) Cobalt
Description : __________ can replace tungsten in high speed steel. (A) Chromium (B) Vanadium (C) Cobalt (D) Molybdenum
Last Answer : (C) Cobalt
Description : __________ is the trade name assigned to a non-ferrous cast alloy composed of cobalt, chromium & tungsten. (A) Stellite (B) High speed steel (C) Cermet (D) Alnico
Description : Pick out the wrong statement. (A) Copper is the metal having the highest electronic conductivity (B) Hardenability & Weldability of metals are inversely related (C) Covalent bonding formed by ... all semiconductor materials (D) Glass transition temperature applies to 'polymers' but not to 'glasses'
Description : Because of a service's __________, standardisation and quality are extremely difficult to control. A)intangibility B)inseparability C)homogeneity D)heterogeneity E)perishability
Last Answer : D)heterogeneity
Description : Which of the following statements concerning the maintenance of solid-silver contacts in relays and auxiliary control circuits is correct? A. When necessary, they should always be dressed with a ... they should be held together with moderate pressure while emery paper is drawn between the contacts.
Last Answer : Answer: B
Description : Which type of threads is recommended for fluctuating loads? a) Fine threads b) Coarse Threads c) Either of fine or coarse d) None of the listed
Last Answer : a) Fine threads
Description : Which threads have greater resistance to unscrewing? a) Coarse b) Fine c) They have equal resistance d) Cannot be determined
Last Answer : b) Fine
Description : Coarse threads have helix angle _____ fine threads. a) Equal to b) Greater than c) Lesser than d) There is no relation
Last Answer : c) Lesser than
Description : The static load carrying capacity of fine threads is greater than that of coarse threads. a) True b) False
Last Answer : b) False
Description : The designation M 36 × 2 means (A) Metric fine threads of 36 mm outside diameter and 2 mm pitch (B) Metric coarse threads of 36 mm outside diameter and 2 mm pitch (C) Metric threads of 36 mm pitch diameter and 2 mm pitch (D) Metric threads of 36 mm core diameter and 2 mm pitch
Last Answer : (A) Metric fine threads of 36 mm outside diameter and 2 mm pitch
Description : The strainer type tube well, is unsuitable for (A) Coarse gravels (B) Fine sandy strata (C) Clean gravels (D) None of these
Last Answer : (B) Fine sandy strata
Description : The soil which contains finest grain particles, is (A) Coarse sand (B) Fine sand (C) Silt (D) Clay
Last Answer : (D) Clay
Description : For better strength and stability, the fine grained soils and coarse grained soils are compacted respectively as (A) Dry of OMC and wet of OMC (B) Wet of OMC and dry of OMC (C) Wet of OMC and wet of OMC (D) Dry of OMC and dry of OMC where OMC is optimum moisture content
Last Answer : Answer: Option B
Description : Pick up the correct statement from the following: (A) The dry density reduces by addition of water after attaining optimum moisture content (B) The line joining the peak of three moisture content graphs ... be compacted to a very high density as compared to fine grained soils (D) All the above
Description : The most suitable material for the central impervious core of a zoned embankment type dam is (A) Clay (B) Coarse sand (C) Silty clay (D) Clay mixed with fine sand
Description : If X, Y and Z are the fineness modulli of coarse, fine and combined aggregates, the percentage (P) of fine aggregates to combined aggregates, is (A) P = [(Z - X)/(Z - Y)] × 100 (B) P = [(X - Z)/(Z - Y)] × 100 (C) P = [(X - Z)/(Z + Y)] × 100 (D) P = [(Z + X)/(Z - Y)] × 100
Description : If fineness modulus of sand is 2.5, it is graded as (A) Very fine sand (B) Fine sand (C) Medium sand (D) Coarse
Description : For preparing a test-specimen, it is necessary (A) To mix cement and fine aggregate by dry hand (B) To mix coarse aggregates (C) To mix water to the cement, fine aggregates and coarse aggregates (D) All the above
Description : The void ratio of (A) Single size coarse aggregate is roughly 0.45 (B) Graded coarse aggregate is roughly 0.040 (C) Fine aggregate is roughly 0.45 (D) All the above
Description : If 50 kg of fine aggregates and 100 kg of coarse aggregates are mixed in a concrete whose water cement ratio is 0.6, the weight of water required for harsh mix, is (A) 8 kg (B) 10 kg (C) 12 kg (D) 14 kg
Last Answer : Answer: Option C
Description : Pick up the correct statement from the following: (A) Bulking of sand is caused due to formation of a thin film of surface moisture (B) Fine sand bulks more than coarse sand (C) The volume of fully saturated sand, is equal to the volume of dry and loose sand (D) All the above
Description : I.S. Sieve Nos. 10 mm and 4.75 mm are generally used for grading of (A) Coarse aggregates (B) Fine aggregates (C) Neither (a) nor (b) (D) Both (a) and (b)