Hardening is a process of heating a metal to a) 400°C b) 500°C c) 600°C d) 700°C

Hardening is a process of heating a metal to
a) 400°C
b) 500°C
c) 600°C
d) 700°C
by

1 Answer

Answer :

c) 600°C
by

Related questions

During the carbonisation of coal (A) All tar is evolved at < 600°C (B) Evolution of H2 and formation of methane and aromatics occur at > 700°C (C) Hard semi-coke starts shrinking at 600°C (D) All (A), (B) and (C)

Description : During the carbonisation of coal (A) All tar is evolved at < 600°C (B) Evolution of H2 and formation of methane and aromatics occur at > 700°C (C) Hard semi-coke starts shrinking at 600°C (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick up the correct statement from the following: (A) Solder material is an alloy which melts at a temperature above 400°C (B) Brazing is done at temperature above 600°C to 1100°C (C) Brazing joint is stronger than the solder joint (D) All the above

Description : Pick up the correct statement from the following: (A) Solder material is an alloy which melts at a temperature above 400°C (B) Brazing is done at temperature above 600°C to 1100°C (C) Brazing joint is stronger than the solder joint (D) All the above

Last Answer : Answer: Option D

With high frequency electric current hardening is achieved and is called as a) case hardening b) induction hardeningc) surface hardening d) metal hardening

Description : With high frequency electric current hardening is achieved and is called as a) case hardening b) induction hardeningc) surface hardening d) metal hardening

Last Answer : b) induction hardening

Typical solvent polymerisation reaction conditions for the production of high density polythene by Zeigler process is (A) 7 kgf/cm2 and 70 °C (B) 1000 kgf/cm2 and 100°C (C) 7 kgf/cm2 and 700°C (D) 1 kgf/cm2 (gage) and 70°C

Description : Typical solvent polymerisation reaction conditions for the production of high density polythene by Zeigler process is (A) 7 kgf/cm2 and 70 °C (B) 1000 kgf/cm2 and 100°C (C) 7 kgf/cm2 and 700°C (D) 1 kgf/cm2 (gage) and 70°C

Last Answer : (A) 7 kgf/cm2 and 70 °C

__________ is the process of coating the surface of steel with aluminium oxide, thereby imparting it increased resistance to corrosion & oxidation upto a temperature of 700°C. (A) Veneering (B) Galvanising (C) Electroplating (D) Calorising

Description : __________ is the process of coating the surface of steel with aluminium oxide, thereby imparting it increased resistance to corrosion & oxidation upto a temperature of 700°C. (A) Veneering (B) Galvanising (C) Electroplating (D) Calorising

Last Answer : (D) Calorising

__________ of a material results, when its strength is increased & ductility is decreased by heating at a relatively lower temperature after cold working. (A) Solid solution hardening (B) Screw dislocation (C) Strain ageing (D) Twinning

Description : __________ of a material results, when its strength is increased & ductility is decreased by heating at a relatively lower temperature after cold working. (A) Solid solution hardening (B) Screw dislocation (C) Strain ageing (D) Twinning

Last Answer : (C) Strain ageing

Heating the Hypo-eutectoid steels to 30°C above the upper critical temperature line, soaking at that temperature and then cooling slowly to the room temperature to form a pearlite & ferrite structure is called (A) Tempering (B) Hardening (C) Annealing (D) Normalising

Description : Heating the Hypo-eutectoid steels to 30°C above the upper critical temperature line, soaking at that temperature and then cooling slowly to the room temperature to form a pearlite & ferrite structure is called (A) Tempering (B) Hardening (C) Annealing (D) Normalising

Last Answer : Option C

The stone ware sewers A. Are used for carrying sewage and drainage from houses B. Are manufactured from clays and shale C. After casting are dried and burnt at temperature 150°C, 700°C and 1200°C D. All the above

Description : The stone ware sewers A. Are used for carrying sewage and drainage from houses B. Are manufactured from clays and shale C. After casting are dried and burnt at temperature 150°C, 700°C and 1200°C D. All the above

Last Answer : ANS: D

. The inner wall of a furnace is at a temperature of 700°C. The composite wall is made of two substances, 10 and 20 cm thick with thermal conductivities of 0.05 and 0.1 W.m-1.°C-1 respectively. The ambient air is at 30°C and the heat transfer co-efficient between the outer surface of wall and air is 20 W.m-2 .°C-1 . The rate of heat loss from the outer surface in W.m-2 is (A) 165.4 (B) 167.5 (C) 172.5 (D) 175

Description : . The inner wall of a furnace is at a temperature of 700°C. The composite wall is made of two substances, 10 and 20 cm thick with thermal conductivities of 0.05 and 0.1 W.m-1.°C-1 respectively. The ambient air is at 30°C ... from the outer surface in W.m-2 is (A) 165.4 (B) 167.5 (C) 172.5 (D) 175

Last Answer : (A) 165.4

In low temperature carbonisation of coal, the(A) Yield of coke oven gas is 290 Nm3/ton dry coal(B) Volatile matter in coke is zero(C) Temperature maintained is 700°C(D) Yield of tar is about 3% of dry coal

Description : In low temperature carbonisation of coal, the (A) Yield of coke oven gas is 290 Nm3 /ton dry coal (B) Volatile matter in coke is zero (C) Temperature maintained is 700°C (D) Yield of tar is about 3% of dry coal

Last Answer : (C) Temperature maintained is 700°C

From his experiments, S.L. Miller produced amino acids by mixing the following in a closed flask. (a) CH4, H2, NH3 and water vapor at 800°C (b) CH3, H2, NH4 and water vapor at 800°C (c) CH4, H2, NH3 and water vapor at 600°C (d) CH3, H2, NH3 and water vapor at 600°C

Description : From his experiments, S.L. Miller produced amino acids by mixing the following in a closed flask. (a) CH4, H2, NH3 and water vapor at 800°C (b) CH3, H2, NH4 and water vapor at 800°C (c) CH4, H2, NH3 and water vapor at 600°C (d) CH3, H2, NH3 and water vapor at 600°C

Last Answer : a) CH4, H2, NH3 and water vapor at 800°C

Out of the following fuels used in a furnace exhausting flue gas at a temperature of 600°C, the percentage stack loss will be maximum in case ofcomplete combustion of(A) Furnace oil with air(B) Furnace oil with oxygen(C) Blast furnace gas with air(D) Blast furnace gas with oxygen

Description : Out of the following fuels used in a furnace exhausting flue gas at a temperature of 600°C, the percentage stack loss will be maximum in case ofcomplete combustion of (A) Furnace oil with air (B) Furnace oil with oxygen (C) Blast furnace gas with air (D) Blast furnace gas with oxygen

Last Answer : (C) Blast furnace gas with air

Maximum stability of white phosphorous is at (A) Very high pressure (B) Atmospheric pressure (C) Room temperature (D) > 600°C

Description : Maximum stability of white phosphorous is at (A) Very high pressure (B) Atmospheric pressure (C) Room temperature (D) > 600°C

Last Answer : (D) > 600°C

Pick up the correct statement from the following: (A) The free quartz suddenly expands at a temperature lower than 600°C (B) The lime stone resists fire upto about 800°C and at higher temperature it splits into CaO and CO2 (C) The sand stone with silicates resist a fire in a better way (D) All the above

Description : Pick up the correct statement from the following: (A) The free quartz suddenly expands at a temperature lower than 600°C (B) The lime stone resists fire upto about 800°C and at higher temperature it splits into ... (C) The sand stone with silicates resist a fire in a better way (D) All the above

Last Answer : Answer: Option D

The following is the operating temperatures of the sodium –sulphur battery. • 400 to 600°C • 1000 to 1500°C • 300 to 350°C • 100 to 200°C

Description : The following is the operating temperatures of the sodium –sulphur battery. • 400 to 600°C • 1000 to 1500°C • 300 to 350°C • 100 to 200°C

Last Answer : • 300 to 350°C

A perfect gas at 27°C is heated at constant pressure till its volume is double. The final temperature is  (a) 54°C  (b) 327°C  (c) 108°C  (d) 654°C  (e) 600°C

Description : A perfect gas at 27°C is heated at constant pressure till its volume is double. The final temperature is  (a) 54°C  (b) 327°C  (c) 108°C  (d) 654°C  (e) 600°C

Last Answer : Answer : b

(4) Decomposition of manganese dioxide Explanation: One of the two chemical methods starts from natural manganese dioxide and converts it using dinitrogen tetroxide and water to manganese nitrate solution. Evaporation of the water leaves the crystalline nitrate salt. At temperatures of 400°C, the salt decomposes, releasing N2O4 and leaving a residue of purified manganese dioxide.

Description : (4) Decomposition of manganese dioxide Explanation: One of the two chemical methods starts from natural manganese dioxide and converts it using dinitrogen tetroxide and water to manganese nitrate ... 400°C, the salt decomposes, releasing N2O4 and leaving a residue of purified manganese dioxide.

Last Answer : The mass number of a nucleus is - (1) always less than its atomic number (2) the sum of the number of protons and neutrons present in the nucleus (3) always more than the atomic weight (4) a fraction

For the measurement of temperature of the order of 400°C, what will we prefer?

Description : For the measurement of temperature of the order of 400°C, what will we prefer?

Last Answer : Thermocouple

Combustion of furnace oil in a furnace (soaking pit) with preheated combustion air at 400°C results in saving of about __________ percentfurnace oil as compared to its combustion with atmospheric air, if the fluegas outlet temperature from the soaking pit is 1200°C.(A) 5(B) 60(C) 20(D) 40

Description : Combustion of furnace oil in a furnace (soaking pit) with preheated combustion air at 400°C results in saving of about __________ percentfurnace oil as compared to its combustion with atmospheric air, if the flue gas outlet temperature from the soaking pit is 1200°C. (A) 5 (B) 60 (C) 20 (D) 40

Last Answer : (C) 20

Which of the following will be unsuitable for dust cleaning from flue gas at 400°C from a pulverised coal fired boiler? (A) Multicyclones (B) Bag filter (C) Wet scrubber (D) Hydrocyclones

Description : Which of the following will be unsuitable for dust cleaning from flue gas at 400°C from a pulverised coal fired boiler? (A) Multicyclones (B) Bag filter (C) Wet scrubber (D) Hydrocyclones

Last Answer : (B) Bag filter

Temperature and pressure in urea autoclave is (A) 120°C and 300 atm (B) 190°C and 200 atm (C) 400°C and 550 atm (D) 200°C and 10 atm

Description : Temperature and pressure in urea autoclave is (A) 120°C and 300 atm (B) 190°C and 200 atm (C) 400°C and 550 atm (D) 200°C and 10 atm

Last Answer : (B) 190°C and 200 atm

Furan reacts with ammonia in the presence of alumina at 400°C to give (a) Pyridine (b) Furfura(c) Pyrrole (d) Furoic acidl

Description : Furan reacts with ammonia in the presence of alumina at 400°C to give (a) Pyridine (b) Furfural (c) Pyrrole (d) Furoic acid

Last Answer : Pyrrole

When propyne is passed through hot iron tube at 400°C, it gives (a) Benzene(b) Toluene(c) m-Xylene(d) Mesitylene

Description : When propyne is passed through hot iron tube at 400°C, it gives (a) Benzene (b) Toluene (c) m-Xylene (d) Mesitylene

Last Answer : Mesitylene

When acetylene is passed through hot iron tube at 400°C, it gives (a) Benzene (b) Toluene (c) o-Xylene (d) Mesitylene

Description : When acetylene is passed through hot iron tube at 400°C, it gives (a) Benzene (b) Toluene (c) o-Xylene (d) Mesitylene

Last Answer : Benzene

Steam undergoes isentropic expansion in a turbine from 5000 kPa and 400°C (entropy = 6.65 kJ/kg K) to 150 kPa) (entropy of saturated liquid = 1.4336 kJ/kg. K, entropy of saturated vapour = 7.2234 kJ/kg. K) The exit condition of steam is (A) Superheated vapour (B) Partially condensed vapour with quality of 0.9 (C) Saturated vapour (D) Partially condensed vapour with quality of 0.1

Description : Steam undergoes isentropic expansion in a turbine from 5000 kPa and 400°C (entropy = 6.65 kJ/kg K) to 150 kPa) (entropy of saturated liquid = 1.4336 kJ/kg. K, entropy of saturated vapour = 7.2234 ... vapour with quality of 0.9 (C) Saturated vapour (D) Partially condensed vapour with quality of 0.1

Last Answer : (A) Superheated vapour

Pressure & temperature maintained in catalytic cracking is about (A) 2 atm & 500°C (B) 10 atm & 500°C (C) 30 atm & 200°C (D) 50 atm & 750°C

Description : Pressure & temperature maintained in catalytic cracking is about (A) 2 atm & 500°C (B) 10 atm & 500°C (C) 30 atm & 200°C (D) 50 atm & 750°C

Last Answer : (A) 2 atm & 500°C

Dust collection efficiency of electrostatic precipitator can be as high as 99.9%. Maximum temperature and pressure of dust laden gas that can be cleaned in an electrostatic precipitator is respectively. (A) 200°C and 5 atm (B) 1000°C and 10 atm (C) 500°C and 50 atm (D) 1000°C and 500 atm

Description : Dust collection efficiency of electrostatic precipitator can be as high as 99.9%. Maximum temperature and pressure of dust laden gas that can be cleaned in an electrostatic precipitator is respectively. (A) 200°C and 5 atm (B) 1000°C and 10 atm (C) 500°C and 50 atm (D) 1000°C and 500 atm

Last Answer : (B) 1000°C and 10 atm

Three solid objects of the same material and of equal mass-a sphere, a cylinder (length = diameter) and a cube are at 500°C initially. These are dropped in a quenching bath containing a large volume of cooling oil each attaining the bath temperature eventually. The time required for 90% change in temperature is the smallest for (A) Cube (B) Cylinder (C) Sphere (D) Equal for all the three

Description : Three solid objects of the same material and of equal mass-a sphere, a cylinder (length = diameter) and a cube are at 500°C initially. These are dropped in a quenching bath containing a large volume of cooling oil ... (A) Cube (B) Cylinder (C) Sphere (D) Equal for all the three

Last Answer : (A) Cube

Iron is not used alone as a catalyst in ammonia synthesis, because (A) Its activity declines rapidly, if heated to above 520°C (B) It decomposes ammonia (C) It gets oxidised above 500°C (D) None of these

Description : Iron is not used alone as a catalyst in ammonia synthesis, because (A) Its activity declines rapidly, if heated to above 520°C (B) It decomposes ammonia (C) It gets oxidised above 500°C (D) None of these

Last Answer : (A) Its activity declines rapidly, if heated to above 520°C

Anthracene undergoes oxidation with O2/V2O5 at 500°C to give (a) Benzoic acid (b) Anthraquinone (c) Phthalic acid (d) Benzophenone

Description : Anthracene undergoes oxidation with O2/V2O5 at 500°C to give (a) Benzoic acid (b) Anthraquinone (c) Phthalic acid (d) Benzophenone

Last Answer : Anthraquinone

How much temperature is maintained during quicklime manufacture in the calcination zone of the vertical shaft kiln? (A) 500°C (B) 750°C (C) 1000°C (D) 1500°C

Description : How much temperature is maintained during quicklime manufacture in the calcination zone of the vertical shaft kiln? (A) 500°C (B) 750°C (C) 1000°C (D) 1500°C

Last Answer : (C) 1000°C

Ethylene oxide is produced by oxidation of ethylene in presence of AgOcatalyst at(A) 1 atm & 100°C(B) 5 atm & 275°C(C) 100 atm & 500°C(D) 50 atm & 1000°C

Description : Ethylene oxide is produced by oxidation of ethylene in presence of AgOcatalyst at (A) 1 atm & 100°C (B) 5 atm & 275°C (C) 100 atm & 500°C (D) 50 atm & 1000°C

Last Answer : (B) 5 atm & 275°C

Vinyl chloride (CH2 = CH.Cl) is produced by the thermal pyrolysis of ethylene dichloride at a pressure & temperature of (A) 4 kgf/cm2 & 500°C (B) 10 kgf/cm2 & 1000°C (C) 40 kg/cm2 & 200°C (D) 100 kgf/cm2 & 500°C

Description : Vinyl chloride (CH2 = CH.Cl) is produced by the thermal pyrolysis of ethylene dichloride at a pressure & temperature of (A) 4 kgf/cm2 & 500°C (B) 10 kgf/cm2 & 1000°C (C) 40 kg/cm2 & 200°C (D) 100 kgf/cm2 & 500°C

Last Answer : (A) 4 kgf/cm2 & 500°C

A solid metallic block weighing 5 kg has an initial temperature of 500°C. 40 kg of water initially at 25°C is contained in a perfectly insulated tank. The metallic block is brought into contact with water. Both of them come to equilibrium. Specific heat of block material is 0.4 kJ.kg-1. K-1. Ignoring the effect of expansion and contraction and also the heat capacity to tank, the total entropy change in kJ.kg-1, K-1is (A) -1.87 (B) 0 (C) 1.26 (D) 3.91

Description : A solid metallic block weighing 5 kg has an initial temperature of 500°C. 40 kg of water initially at 25°C is contained in a perfectly insulated tank. The metallic block is brought into contact with water. Both of them come to equilibrium. ... .kg-1, K-1is (A) -1.87 (B) 0 (C) 1.26 (D) 3.91

Last Answer : (B) 0

__________ glass is used in the mercury in glass thermometer meant for measuring a temperature of 500°C. (A) Borosilicate (B) High silica (C) Supermax (D) Lead

Description : __________ glass is used in the mercury in glass thermometer meant for measuring a temperature of 500°C. (A) Borosilicate (B) High silica (C) Supermax (D) Lead

Last Answer : (C) Supermax

The value of y = cp/cv. at < 500°C for air & most common gases can be safely assumed to be (A) 0.8 (B) 1 (C) 1.4 (D) 1.8

Description : The value of y = cp/cv. at < 500°C for air & most common gases can be safely assumed to be (A) 0.8 (B) 1 (C) 1.4 (D) 1.8

Last Answer : Option C

The increase in hardness of metal due to its cold working is termed as the __________ hardening. (A) Work (B) Age (C) Induction (D) Flame

Description : The increase in hardness of metal due to its cold working is termed as the __________ hardening. (A) Work (B) Age (C) Induction (D) Flame

Last Answer : (A) Work

Pick out the correct statement. (A) Stainless steel is nothing but chromium coated steel (B) Hardening of a soft metal can be done by alloying it with another metal or non-metal (C) Plastic deformation of a material is its temporary distortion under the action of applied stress (D) Rusting of iron is not electrochemical in nature

Description : Pick out the correct statement. (A) Stainless steel is nothing but chromium coated steel (B) Hardening of a soft metal can be done by alloying it with another metal or non-metal (C) ... its temporary distortion under the action of applied stress (D) Rusting of iron is not electrochemical in nature

Last Answer : (B) Hardening of a soft metal can be done by alloying it with another metal or non-metal

In cold working of metal as compared to its hot working (A) Cracks and blow holes are eliminated (B) Ductility and impact strength improves (C) Appreciable strain hardening is produced (D) Yield stress, hardness and fatigue strength is not at all affected

Description : In cold working of metal as compared to its hot working (A) Cracks and blow holes are eliminated (B) Ductility and impact strength improves (C) Appreciable strain hardening is produced (D) Yield stress, hardness and fatigue strength is not at all affected

Last Answer : (C) Appreciable strain hardening is produced

The behaviour of a metal specimen, which when plastically strained in tension reduces its yield stress in compression and vice versa; is termed as the (A) Work hardening (B) Bauschinger effect (C) Creeping effect (D) Stress recovery effect

Description : The behaviour of a metal specimen, which when plastically strained in tension reduces its yield stress in compression and vice versa; is termed as the (A) Work hardening (B) Bauschinger effect (C) Creeping effect (D) Stress recovery effect

Last Answer : (B) Bauschinger effect

. Age hardening is connected with (A) Babbitt metal (B) Gun metal (C) Stainless steel (D) Duralumin

Description : . Age hardening is connected with (A) Babbitt metal (B) Gun metal (C) Stainless steel (D) Duralumin

Last Answer : D) Duralumin

Strain hardening effect in a metal subjected to cold working is due to the __________ mechanism. (A) Fracture (B) Dislocation (C) Slip (D) Twinning

Description : Strain hardening effect in a metal subjected to cold working is due to the __________ mechanism. (A) Fracture (B) Dislocation (C) Slip (D) Twinning

Last Answer : (C) Slip

Pick out the wrong statement about the machinability of metals. Machinability of a metal (A) Decreases with increase in strain hardening tendencies (B) Decreases with increase in hardness, in general (C) Depend on the composition, microstructure and physical & mechanical

Description : Pick out the wrong statement about the machinability of metals. Machinability of a metal (A) Decreases with increase in strain hardening tendencies (B) Decreases with increase in hardness, in general (C) Depend on the composition, microstructure and physical & mechanical

Last Answer : Option C

Aluminum is a very light metal which resists a) scratch b) moisture c) temperature d) corrosion

Description : Aluminum is a very light metal which resists a) scratch b) moisture c) temperature d) corrosion

Last Answer : d) corrosion

Soil samples are collected to? a Plastic bags b Metal containers c Gunny bags d Wooden boxes

Description : Soil samples are collected to? a Plastic bags b Metal containers c Gunny bags d Wooden boxes

Last Answer : a Plastic bags

__________ is not a case hardening process.(A) Carburising (B) Nitriding (C) Cyaniding (D) Annealing

Description : __________ is not a case hardening process. (A) Carburising (B) Nitriding (C) Cyaniding (D) Annealing

Last Answer : (D) Annealing

Nitriding of steel is a process for (A) Case hardening (B) Spheroidising (C) Normalising (D) Annealing

Description : Nitriding of steel is a process for (A) Case hardening (B) Spheroidising (C) Normalising (D) Annealing

Last Answer : (A) Case hardening

A solid material shows case hardening properties while drying. Which of the following should be controlled to control the drying process? (A) Flow rate of inlet air (B) Relative humidity of outlet air (C) Humidity of inlet air (D) Temperature of the solid

Description : A solid material shows case hardening properties while drying. Which of the following should be controlled to control the drying process? (A) Flow rate of inlet air (B) Relative humidity of outlet air (C) Humidity of inlet air (D) Temperature of the solid

Last Answer : (D) Temperature of the solid

Which of the following processes follows the hardening process for reducing the hardening strains & increasing the toughness of the steel part? (A) Anodising (B) Tempering (C) Carburising

Description : Which of the following processes follows the hardening process for reducing the hardening strains & increasing the toughness of the steel part? (A) Anodising (B) Tempering (C) Carburising

Last Answer : (B) Tempering

Globular form of cementite is formed during the __________ process. (A) Spheroidising (B) Hardening (C) Annealing (D) Normalising

Description : Globular form of cementite is formed during the __________ process. (A) Spheroidising (B) Hardening (C) Annealing (D) Normalising

Last Answer : (B) Hardening