Titanium is produced by __________ of Ti Cl4. (A) Electrolytic reduction (B) Calcium reduction (C) Magnesium reduction (D) Thermal dissociation

Titanium is produced by __________ of Ti Cl4.
(A) Electrolytic reduction
(B) Calcium reduction
(C) Magnesium reduction
(D) Thermal dissociation
by

1 Answer

Answer :

(C) Magnesium reduction
by

Related questions

Titanium is produced by __________ of Ti Cl4. (A) Electrolytic reduction (B) Calcium reduction (C) Magnesium reduction (D) Thermal dissociation

Description : Titanium is produced by __________ of Ti Cl4. (A) Electrolytic reduction (B) Calcium reduction (C) Magnesium reduction (D) Thermal dissociation

Last Answer : (C) Magnesium reduction

Chlorine gas is produced by the electrolysis of brine (NaCl solution with solid NaCl make up) in mercury electrolytic cell. Which of the following is the anodic reaction? (A) Oxidation of Na + ions (B) Oxidation of Cl - ions (C) Reduction of Na + ions (D) Reduction of Cl - ions

Description : Chlorine gas is produced by the electrolysis of brine (NaCl solution with solid NaCl make up) in mercury electrolytic cell. Which of the following is the anodic reaction? (A) Oxidation of Na + ions (B) Oxidation of Cl - ions (C) Reduction of Na + ions (D) Reduction of Cl - ions

Last Answer : (B) Oxidation of Cl - ions

__________ alloys have the highest specific strength of all the structural materials out of the following. (A) Magnetic steel (B) Titanium (C) Chromium (D) Magnesium

Description : __________ alloys have the highest specific strength of all the structural materials out of the following. (A) Magnetic steel (B) Titanium (C) Chromium (D) Magnesium

Last Answer : (B) Titanium

(a) `[Ti(H_(2)O)_(6)]^(3+)` absorbs light of wavelength 5000Å. Name one ligand which would form a titanium (III) complex absorbing light to lower wave

Description : (a) `[Ti(H_(2)O)_(6)]^(3+)` absorbs light of wavelength 5000Å. Name one ligand which would form a titanium (III) complex absorbing light to lower wave

Last Answer : (a) `[Ti(H_(2)O)_(6)]^(3+)` absorbs light of wavelength 5000Å. Name one ligand which would form a titanium (III) ... ^(3+)" " (iv) [Pd(en)_(2)]^(2+)`

Discuss the properties and applications of Ti-6Al-4V titanium alloy.

Description : Discuss the properties and applications of Ti-6Al-4V titanium alloy.

Last Answer : Properties of Ti-6Al-4V 1. The high strength 2. Low weight ratio 3. Outstanding corrosion resistance 4. Good machinability 5. Excellent mechanical properties Applications: Ti6Al4V is ... as implants and prosthesis 3. Marine applications 4. Chemical industry 5. Gas turbines Powder

My theory of electrolytic dissociation earned me t 1903 Nobel Prize in chemistry. My name is: w) Niels Bohr x) Svante Arrhenius y) Michael Faraday z) John Cavendish

Description : My theory of electrolytic dissociation earned me t 1903 Nobel Prize in chemistry. My name is: w) Niels Bohr x) Svante Arrhenius y) Michael Faraday z) John Cavendish

Last Answer : ANSWER: X -- SVANTE ARRHENIUS

Define electrolytic dissociation.State Arrhenius theory of electrolytic dissociation.

Description : Define electrolytic dissociation.State Arrhenius theory of electrolytic dissociation.  

Last Answer : Electrolytic dissociation: - The process of splitting up of an electrovalent compound (Electrolyte) into its ions when dissolved in proper solvent like water is called as electrolytic dissociation. Arrhenius ... that can be present on cation or anion depends upon valency of parent atom.  

Which of the following is the lightest of engineering metals? (A) Magnesium (B) Aluminium (C) Titanium (D) Tin

Description : Which of the following is the lightest of engineering metals? (A) Magnesium (B) Aluminium (C) Titanium (D) Tin

Last Answer : (A) Magnesium

Common salt is generally not produced commonly by __________ method from brine. (A) Freeze drying (B) Electrolytic (C) Solar evaporation (D) Vacuum evaporation

Description : Common salt is generally not produced commonly by __________ method from brine. (A) Freeze drying (B) Electrolytic (C) Solar evaporation (D) Vacuum evaporation

Last Answer : (A) Freeze drying

Concentration of NaOH solution produced by mercury electrolytic cell is about __________ percent. (A) 10 (B) 25 (C) 50 (D) 98

Description : Concentration of NaOH solution produced by mercury electrolytic cell is about __________ percent. (A) 10 (B) 25 (C) 50 (D) 98

Last Answer : (C) 50

Concentration of NaOH solution produced by diaphragm electrolytic cell is about __________ percent. (A) 10 (B) 25 (C) 50 (D) 98

Description : Concentration of NaOH solution produced by diaphragm electrolytic cell is about __________ percent. (A) 10 (B) 25 (C) 50 (D) 98

Last Answer : (A) 10

Common salt is produced from sea water in India generally by the __________ method. (A) Freeze drying (B) Solar evaporation (C) Electrolytic (D) None of these

Description : Common salt is produced from sea water in India generally by the __________ method. (A) Freeze drying (B) Solar evaporation (C) Electrolytic (D) None of these

Last Answer : B) Solar evaporation

The metallic aluminium is obtained from pure alumina in the presence of fused cryolite by (A) Electrolysis (B) Electrolytic reduction (C) Electrolytic oxidation (D) None of these

Description : The metallic aluminium is obtained from pure alumina in the presence of fused cryolite by (A) Electrolysis (B) Electrolytic reduction (C) Electrolytic oxidation (D) None of these

Last Answer : (B) Electrolytic reduction

Electrolytic reduction cell used for conversion of calcined Al2O3to Al is a carbon lined furnace operating at 800-900 °C. The purpose of electric current supplied to the furnace is to (A) Achieve very high purity of aluminium (99.9%) (B) Keep the electrolyte in liquid condition by the generation of heat (C) Electrolytically dissociate alumina (D) Both (B) & (C)

Description : Electrolytic reduction cell used for conversion of calcined Al2O3to Al is a carbon lined furnace operating at 800-900 °C. The purpose of electric current supplied to the furnace is to (A) Achieve very high ... by the generation of heat (C) Electrolytically dissociate alumina (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

Which of the following commonly used condenser tube materials has the lowest thermal conductivity? (A) Admiralty brass (B) Stainless steel (C) Aluminium brass (D) Titanium

Description : Which of the following commonly used condenser tube materials has the lowest thermal conductivity? (A) Admiralty brass (B) Stainless steel (C) Aluminium brass (D) Titanium

Last Answer : (B) Stainless steel

Which of the following is an endothermic reaction? (A) Absorption of SO3 in 98% H2SO4 (B) C + H2O = CO + H2 (C) Thermal dissociation of iron pyrites (D) Both (B) and (C)

Description : Which of the following is an endothermic reaction? (A) Absorption of SO3 in 98% H2SO4 (B) C + H2O = CO + H2 (C) Thermal dissociation of iron pyrites (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Which of the following oxides is not present in hematite iron ore? (A) Titanium oxide (B) Calcium oxide (C) Cobalt oxide (D) Manganese oxide

Description : Which of the following oxides is not present in hematite iron ore? (A) Titanium oxide (B) Calcium oxide (C) Cobalt oxide (D) Manganese oxide

Last Answer : (C) Cobalt oxide

What is the voltage of an electrolytic cell copper and magnesium electrodes?

Description : What is the voltage of an electrolytic cell copper and magnesium electrodes?

Last Answer : -2.71 V

The fundamental scientific principle in the operation of battery is – (1) acid-base interaction (2) dialysis (3) dissociation of electrolytes (4) oxidation-reduction

Description : The fundamental scientific principle in the operation of battery is – (1) acid-base interaction (2) dialysis (3) dissociation of electrolytes (4) oxidation-reduction

Last Answer : (3) dissociation of electrolytes Explanation: The electrolyte consists of a solvent (water, an organic liquid, or even a solid) and one or more chemicals that dissociate into ions in the solvent. These ... that contains ions and can be decomposed by electrolysis, e.g., that present in a battery.

The fundamental scientific principle in the operation of battery is (1) acid-base interaction (2) dialysis (3) dissociation of electrolytes (4) oxidation-reduction

Description : The fundamental scientific principle in the operation of battery is (1) acid-base interaction (2) dialysis (3) dissociation of electrolytes (4) oxidation-reduction

Last Answer : dissociation of electrolytes

Electrolytic reduction of alumina to aluminum by the Hall-Heroult process is carried out

Description : Electrolytic reduction of alumina to aluminum by the Hall-Heroult process is carried out

Last Answer : Electrolytic reduction of alumina to aluminum by the Hall-Heroult process is carried out A. In ... which forms a melt with higher melting temparature.

The function of adding cryolite in the electrolytic reduction of alumina by Hall-Heroult process is to

Description : The function of adding cryolite in the electrolytic reduction of alumina by Hall-Heroult process is to

Last Answer : The function of adding cryolite in the electrolytic reduction of alumina by Hall-Heroult ... D. increase the electrical canductivity of alumina

During electrolytic reduction of alumina , two auxiliary electrolytes X and Y are added to increase the electrical conductance and lower the temperatu

Description : During electrolytic reduction of alumina , two auxiliary electrolytes X and Y are added to increase the electrical conductance and lower the temperatu

Last Answer : During electrolytic reduction of alumina , two auxiliary electrolytes X and Y are added to increase ... . alum and flourspar D. flourspar and bauxite

Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. Coke powder is spreadded over the molten electro

Description : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. Coke powder is spreadded over the molten electro

Last Answer : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. ... of molten aluminium by air D. (a) both (b)

Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. The purpose of adding crylite is :

Description : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. The purpose of adding crylite is :

Last Answer : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. ... . to increase melting point of `Al_(2)O_(3)`

Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. What is wrong if anode is made of nickel instant

Description : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. What is wrong if anode is made of nickel instant

Last Answer : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite ... CO D. Nickel May be affected by high temperature.

The major role of flourspar, `CaF_(2)` which is added in small amount in the electrolytic reduction of `Al_(2)O_(3)` dissolved on fused cryolite in fu

Description : The major role of flourspar, `CaF_(2)` which is added in small amount in the electrolytic reduction of `Al_(2)O_(3)` dissolved on fused cryolite in fu

Last Answer : The major role of flourspar, `CaF_(2)` which is added in small amount in the electrolytic reduction ... the rate of oxidation of carbon at the anode

(A) Alumina has hgih condutivity (R ) The mixture of alumia and cryolite is used for electrolytic reduction in order to extract aluminium

Description : (A) Alumina has hgih condutivity (R ) The mixture of alumia and cryolite is used for electrolytic reduction in order to extract aluminium

Last Answer : (A) Alumina has hgih condutivity (R ) The mixture of alumia and cryolite is used for electrolytic reduction ... (A) is incorrect but (R ) is correct

The function of fluorspar in the electrolytic reduction of alumnia dissolved in fused cryotile `(Na_(3)AlF_(6))` is:

Description : The function of fluorspar in the electrolytic reduction of alumnia dissolved in fused cryotile `(Na_(3)AlF_(6))` is:

Last Answer : The function of fluorspar in the electrolytic reduction of alumnia dissolved in fused cryotile `(Na_(3 ... rate of oxidation of carbon at the cathode

Where does reduction occur in an electrolytic cell?

Description : Where does reduction occur in an electrolytic cell?

Last Answer : Cathode

Describe electrolytic reduction of alumina.

Description : Describe electrolytic reduction of alumina.

Last Answer : i) Aluminium is extracted from alumina by electrolysis of mixture of alumina (20%) , Cryolite (60%) & Calcium fluoride (20%). Addition of cryolite& fluorspar not only makes alumina a ... set free at the cathode is removed periodically in the molten condition from bottom of the cell.

__________ chloride present in crude petroleum as impurity is the most prolific producer of HCl during distillation. (A) Magnesium (B) Potassium (C) Calcium (D) Sodium

Description : __________ chloride present in crude petroleum as impurity is the most prolific producer of HCl during distillation. (A) Magnesium (B) Potassium (C) Calcium (D) Sodium

Last Answer : (A) Magnesium

Magnesium and calcium __________ cause temporary hardness of water. (A) Carbonates (B) Bicarbonates (C) Phosphates (D) Sulphates

Description : Magnesium and calcium __________ cause temporary hardness of water. (A) Carbonates (B) Bicarbonates (C) Phosphates (D) Sulphates

Last Answer : (B) Bicarbonates

(A) : Thermal stability of the hydrides of VIA group elements decreases from `H_(2)O` to `H_(2)Po` (R) : The heats of dissociation of M - H bond of hy

Description : (A) : Thermal stability of the hydrides of VIA group elements decreases from `H_(2)O` to `H_(2)Po` (R) : The heats of dissociation of M - H bond of hy

Last Answer : (A) : Thermal stability of the hydrides of VIA group elements decreases from `H_(2)O` to `H_(2)Po` (R) : ... is false D. (A) is false but (R) is true

Mercury electrolytic cells are preferred over diaphragm electrolytic cell (for production of caustic soda), as it (A) Has larger production capacity per unit cell (B) Consumes less power per ton of Cl2 produced (C) Produces high purity (70%) caustic soda directly (D) All (A), (B) and (C)

Description : Mercury electrolytic cells are preferred over diaphragm electrolytic cell (for production of caustic soda), as it (A) Has larger production capacity per unit cell (B) Consumes less power per ton of Cl2 produced (C) Produces high purity (70%) caustic soda directly (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Titanium dioxide is a/an __________ colour pigment. (A) White (B) Black (C) Yellow (D) Blue

Description : Titanium dioxide is a/an __________ colour pigment. (A) White (B) Black (C) Yellow (D) Blue

Last Answer : (A) White

Use of catalyst is a must in the ammonia manufacture, because the reaction is reversible as well as the heat of dissociation of N2 & H2 is high. The presence of promoter along with the catalyst helps in __________ of the catalyst. (A) Stabilisation (B) Increasing the effectiveness (C) Improving the strength & heat resistance (D) All a, b & c

Description : Use of catalyst is a must in the ammonia manufacture, because the reaction is reversible as well as the heat of dissociation of N2 & H2 is high. The presence of promoter along with the catalyst helps in ... B) Increasing the effectiveness (C) Improving the strength & heat resistance (D) All a, b & c

Last Answer : (D) All a, b & c

Nickel is not used as a catalyst in the __________ reaction. (A) Shift conversion (B) Oil hydrogenation (C) Steaming reforming of naphtha (D) Ammonia cracking/dissociation

Description : Nickel is not used as a catalyst in the __________ reaction. (A) Shift conversion (B) Oil hydrogenation (C) Steaming reforming of naphtha (D) Ammonia cracking/dissociation

Last Answer : (A) Shift conversion

In the decomposition of PCl5 represented by, PCl5 ⇌ PCl3 + Cl2, decrease in the pressure of the system will __________ the degree of dissociation of PCl5. (A) Increase (B) Decrease (C) Not alter (D) None of these

Description : In the decomposition of PCl5 represented by, PCl5 ⇌ PCl3 + Cl2, decrease in the pressure of the system will __________ the degree of dissociation of PCl5. (A) Increase (B) Decrease (C) Not alter (D) None of these

Last Answer : (A) Increase

Mercury electrolytic cell produces 50-70% NaOH solution. Its operating temperature is __________ °C. (A) 25 (B) 60-70 (C) 150-200 (D) 250-300

Description : Mercury electrolytic cell produces 50-70% NaOH solution. Its operating temperature is __________ °C. (A) 25 (B) 60-70 (C) 150-200 (D) 250-300

Last Answer : (B) 60-70

Which of the following does not come under the category of 'secondary nutrient' for plant growth? (A) Calcium (B) Magnesium (C) Sulphur (D) Oxygen

Description : Which of the following does not come under the category of 'secondary nutrient' for plant growth? (A) Calcium (B) Magnesium (C) Sulphur (D) Oxygen

Last Answer : (D) Oxygen

Lime and soda ash are added to water to remove (A) Bicarbonates & sulphates of calcium and magnesium (B) Undesirable taste and odour (C) Bacteria (D) Its corrosiveness

Description : Lime and soda ash are added to water to remove (A) Bicarbonates & sulphates of calcium and magnesium (B) Undesirable taste and odour (C) Bacteria (D) Its corrosiveness

Last Answer : (A) Bicarbonates & sulphates of calcium and magnesium

Zeolite removes both temporary as well as permanent hardness of water by precipitating calcium and magnesium present in water as insoluble zeolites. Used zeolite is regenerated by flushing with the solution of (A) Calcium sulphate (B) Sodium chloride(C) Sodium sulphate(D) Magnesium chloride

Description : Zeolite removes both temporary as well as permanent hardness of water by precipitating calcium and magnesium present in water as insoluble zeolites. Used zeolite is regenerated by flushing with the solution of (A) Calcium sulphate (B) Sodium chloride (C) Sodium sulphate (D) Magnesium chloride

Last Answer : (B) Sodium chloride

furnace slag is mainly molten (A) Sand (B) Magnesium silicate (C) Calcium silicate (D) Iron pyrite

Description : furnace slag is mainly molten (A) Sand (B) Magnesium silicate (C) Calcium silicate (D) Iron pyrite

Last Answer : Option C

Which of the following metals reacts violently with water? (A) Mercury (B) Sodium (C) Calcium (D) Magnesium

Description : Which of the following metals reacts violently with water? (A) Mercury (B) Sodium (C) Calcium (D) Magnesium

Last Answer : Option B

MLMenu, a natural language interface for the TI Explorer, is similar to __________ a) Ethernet b) NaturalLink c) PROLOG d) The Personal Consultant

Description : MLMenu, a natural language interface for the TI Explorer, is similar to __________ a) Ethernet b) NaturalLink c) PROLOG d) The Personal Consultant

Last Answer : b) NaturalLink

Extraction of __________ employs an electrolytic process. (A) Aluminium (B) Silver (C) Copper (D) All (A), (B) and (C)

Description : Extraction of __________ employs an electrolytic process. (A) Aluminium (B) Silver (C) Copper (D) All (A), (B) and (C)

Last Answer : (A) Aluminium

Although thermodynamically feasible, in practice, Magnesium metal is not used for the reduction of Alumina in the metallurgy of aluminium.Why?

Description : Although thermodynamically feasible, in practice, Magnesium metal is not used for the reduction of Alumina in the metallurgy of aluminium.Why?

Last Answer : Ans. : Below the temperature(1623 K) correspoinding to the point of intersection of Al 2O3 and MgO curves in Ellingham diagram, Magnesium can reduce Alumina because the ΔfG o value of Al2O3 at ... to Al. But Magnesium is much costier metal than Aluminium and hence the process will be uneconomical.

Heat balance of furnace provides means of determining the (A) Thermal efficiency of the process (B) Sources of heat losses (C) Scope of reduction of heat losses(D) All (A), (B) and (C)

Description : Heat balance of furnace provides means of determining the (A) Thermal efficiency of the process (B) Sources of heat losses (C) Scope of reduction of heat losses (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Thermal pollution due to excessive heat & temperature in the working place causes (A) Reduction in working efficiency of manpower (B) Fatigue (C) High breathing rate (D) All (A), (B) & (C)

Description : Thermal pollution due to excessive heat & temperature in the working place causes (A) Reduction in working efficiency of manpower (B) Fatigue (C) High breathing rate (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)