Description : Concentration of NaOH solution produced by diaphragm electrolytic cell is about __________ percent. (A) 10 (B) 25 (C) 50 (D) 98
Last Answer : (A) 10
Description : Mercury electrolytic cell produces 50-70% NaOH solution. Its operating temperature is __________ °C. (A) 25 (B) 60-70 (C) 150-200 (D) 250-300
Last Answer : (B) 60-70
Description : Diaphragm electrolytic cell as compared to mercury electrolytic cell (A) Produces 70% NaOH solution (B) Requires less specific power consumption for the production of chlorine (C) Requires lesser investment for similar capacity (D) All (A), (B) and (C)
Last Answer : (C) Requires lesser investment for similar capacity
Description : Chlorine gas is produced by the electrolysis of brine (NaCl solution with solid NaCl make up) in mercury electrolytic cell. Which of the following is the anodic reaction? (A) Oxidation of Na + ions (B) Oxidation of Cl - ions (C) Reduction of Na + ions (D) Reduction of Cl - ions
Last Answer : (B) Oxidation of Cl - ions
Description : Triple superphosphate which contains about 46% P2O5 is produced by the reaction of phosphate rock with ortho phosphoric acid of________ percent concentration. (A) 25-28 (B) 52-54 (C) 75-80 (D) > 98
Last Answer : (B) 52-54
Description : What products do we get on electrolysis of saturated brine using steel cathode and graphite anode in an electrolytic cell? (A) Cl2 & Na (B) Cl2 & H2 (C) O2 & H2 (D) Cl2 , H2 & NaOH solution
Last Answer : (D) Cl2 , H2 & NaOH solution
Description : The electrolytic solution used in a hydrogen-oxygen fuel cell is ____________ a) 75% KOH solution b) 25% KOH solution c) 75% NaOH solution d) 25% NaOH solution
Last Answer : b) 25% KOH solution
Description : Mercury electrolytic cells are preferred over diaphragm electrolytic cell (for production of caustic soda), as it (A) Has larger production capacity per unit cell (B) Consumes less power per ton of Cl2 produced (C) Produces high purity (70%) caustic soda directly (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : Mercury cells for caustic soda manufacture, compared to diaphragm cells (A) Require lower initial investment (B) Require more power (C) Produce lower concentration NaOH (D) None of these
Last Answer : (D) None of these
Description : Gasoline yield in catalytic reforming of naphtha may be about __________ percent by weight. (A) 85 (B) 65 (C) 50 (D) 98
Last Answer : (A) 85
Description : Which of the following processes does not produce Cl2 as a co-product during the manufacture of caustic soda? (A) Diaphragm electrolytic cell process (B) Mercury electrolytic cell process (C) Lime-soda process (D) None of these
Last Answer : (C) Lime-soda process
Description : Which of the following is the most adverse factor challenging the choice of mercury electrolytic cell process for the production of caustic soda? (A) High cost of mercury (B) High specific gravity of mercury (C) Non-availability of high purity mercury (D) Pollution of water stream by mercury
Last Answer : (D) Pollution of water stream by mercury
Description : The concentration (weight %) of nitric acid produced by the oxidation of ammonia and absorption of nitrogen oxides with water is about __________ percent. (A) 60 (B) 30 (C) 95 (D) 100
Last Answer : (A) 60
Description : Common salt is generally not produced commonly by __________ method from brine. (A) Freeze drying (B) Electrolytic (C) Solar evaporation (D) Vacuum evaporation
Last Answer : (A) Freeze drying
Description : Common salt is produced from sea water in India generally by the __________ method. (A) Freeze drying (B) Solar evaporation (C) Electrolytic (D) None of these
Last Answer : B) Solar evaporation
Description : Titanium is produced by __________ of Ti Cl4. (A) Electrolytic reduction (B) Calcium reduction (C) Magnesium reduction (D) Thermal dissociation
Last Answer : (C) Magnesium reduction
Description : . Most easily and cheaply available fibrous raw material for paper manufacture available in India is bamboo. The yield of pulp produced from fibrous raw material by mechanical process is about __________ percent. (A) 75 (B) < 10 (C) > 30 (D) 50
Last Answer : (B) < 10
Description : What is the concentration in percent (vv) of a solution containing 50 mL of diethyl ether(C4H10O) in 2.5 L of solution?
Last Answer : Need answer
Description : For achieving maximum capacity of the ball mill, the ball charge should be equal to about __________ percent of the ball mill volume. (A) 10 (B) 25 (C) 50 (D) 75
Last Answer : (C) 50
Description : Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70
Last Answer : (B) 25-30
Description : Carbon Content by weight in air dried wood may be about __________ percent. (A) 10 (B) 25 (C) 50 (D) 80
Description : Yield of charcoal in high temperature carbonisation of wood is about __________ percent. (A) 10 (B) 25 (C) 50 (D) 75
Last Answer : (B) 25
Description : Nitrogen content of calcium ammonium nitrate (CAN) is __________ percent. (A) 10 (B) 25 (C) 50 (D) 80
Description : High relative humidity decreases the evaporative process and as the temperature is increased, the relative humidity decreases. The comfort range for human body is the ambient temperature of 22 to 27°C with relative humidity ranging from __________ ... to 10 (B) 15 to 25 (C) 45 to 50 (D) 75 to 80
Last Answer : (C) 45 to 50
Description : During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98
Last Answer : (D) 98
Description : Conversion of SO2 to SO3 in Monsanto 4-pass converter is about __________ percent. (A) 80 (B) 90 (C) 98 (D) 100
Last Answer : (C) 98
Description : In a plot of 18000 sq. m., only 13500 sq. m. is allowed for construction. What percent of the plot is to be left without construction? a) 25 b) 60 c) 45 d) 40 e) 98
Last Answer : Answer: A Percentage of plot allowed for construction = (13500/18000 × 100) = 75 %. Thus, the percentage of plot to be left without construction = 100 % - 75 % = 25 %.
Description : Polycaprolactam (Nylon - 6) is produced by the condensation polymerisation of caprolactam at 240-280°C in which the conversion of caprolactam is about __________ percent. (A) 50 (B) 75 (C) 90 (D) 99
Last Answer : (C) 90
Description : Quantity of coke produced from metallurgical coal may be around __________ percent. (A) 30 (B) 50 (C) 75 (D) 95
Last Answer : (C) 75
Description : The conversion of caprolactam in the above case is about __________ percent. (A) 25 (B) 50 (C) 70 (D) 90
Last Answer : (D) 90
Description : The amount of a radioisotope remaining undecayed after a time equal to four times its half life, will be __________ percent. (A) 3.125 (B) 6.25 (C) 12.50 (D) 25
Last Answer : (B) 6.25
Description : 1.250 g of metal carbonate `(MCO_(3))` was treated with 500 mL of 0.1 M HCl solution. The unreacted HCl required 50.0 mL of 0.500 M NaOH solution for
Last Answer : 1.250 g of metal carbonate `(MCO_(3))` was treated with 500 mL of 0.1 M HCl solution. The unreacted HCl ... the metal M A. Mg B. Ca C. Sr D. Ba
Description : The basic filtration equation is given as dt/dV = (µ/A ∆P). [(α .CV/A) + Rm], where, V is volume of the filtrate; A is the filtration area, a is specific cake resistance, μ is viscosity of ... produced? Neglect filter medium resistance, Rm; assume incompressible cake. (A) 10 (B) 20 (C) 25 (D) 30
Last Answer : (B) 20
Description : By what number must the given number be multiplied to increase the number by 25 %. a) 25 b) 60 c) 50 d) None e) 98
Last Answer : Answer: A Let the number be m Increase in its value = 25 % of m = 25/100 × m = m/4 Therefore, increase value = m + m/4 = (4m + m)/4 = 5m/4 Therefore, the given number must be multiplied by 5/4 to increase the number by 25 %.
Description : Orbital period of the planet Mercury around the sun is -------? A. 88 days (Answer) B. 365 days C. 2 years D. 98 days E. None of these
Last Answer : A. 88 days (Answer)
Description : Explosion limit of blast furnace gas is 37 to 71% gas in gas-air mixture. It means that the blast furnace gas will explode when burnt in a confined space, if its concentration in the gas-air mixture is __________ percent. (A) < 37% (B) > 71% (C) In between 37 & 71% (D) None of these
Last Answer : (C) In between 37 & 71%
Description : The concentration of water vapour in troposphere, which depends upon the altitude & temperature, varies in the range of zero to __________ percent. (A) 1 (B) 4 (C) 8 (D) 12
Last Answer : (B) 4
Description : Acute danger to human life (i.e. death) exists, if the concentration of CO2 in atmospheric air exceeds __________ percent (by volume). (A) 1 (B) 3 (C) 7 (D) 20
Last Answer : (D) 20
Description : Presence of nitrogen in high concentration in contaminated air reduces partial pressure of oxygen in lungs, thereby causing asphyxia (suffocation) leading to death from oxygen deficiency. Concentration of N2 in contaminated air at ... asphyxiate is ≥ __________ percent. (A) 84 (B) 88 (C) 80 (D) 92
Last Answer : (A) 84
Description : What is the percent by mass concentration of a solution that contains 5.30 of salt?
Last Answer : The concentration of a solution is basically how strong the solution is.
Description : A fresh `H_(2)O_(2)` solution is labeled as 11.2 V. Calculate its concentration in wt/vol percent.
Last Answer : A fresh `H_(2)O_(2)` solution is labeled as 11.2 V. Calculate its concentration in wt/vol percent. A. `3.4` B. `6.8` C. `1.7` D. `13.6`
Description : The yield of straight run LPG from crude oil is about __________ weight percent. (A) 20-25 (B) 1-1.5 (C) 10-15 (D) 0.1-0.2
Last Answer : (B) 1-1.5
Description : Water content in the crude oil as it comes out of oil well may be upto __________ percent. (A) 2 (B) 5 (C) 10 (D) 25
Last Answer : (D) 25
Description : Indian monazite sand contains __________ percent thorium. (A) 10 (B) 25 (C) 60 (D) 90
Description : Crushing efficiency of a machine ranges between __________ percent. (A) 0.1 to 2 (B) 5 to 10 (C) 20 to 25
Last Answer : (A) 0.1 to 2
Description : Maximum thermal efficiency of boiler may be about __________ percent. (A) 10 (B) 25 (C) 65 (D) 90
Description : Yield of pitch from distillation of high temperature tar is around __________ percent. (A) 10 (B) 25 (C) 65 (D) 90
Last Answer : (C) 65
Description : 'Utilities' in a chemical process plant includes compressed air, steam, water, electrical power, oxygen, acetylene, fuel gases etc. Utility costs for ordinary chemical process plants ranges roughly from __________ percent of the total product ... 1 to 5 (B) 10 to 20 (C) 25 to 35 (D) 35 to 45
Last Answer : (B) 10 to 20
Description : Caustic soda is produced in a mercury cell having anode and cathode made respectively of moving mercury and (A) Moving mercury and graphite (B) Graphite and moving mercury (C) Moving mercury and carbon (D) Moving mercury and crimped steel wire
Last Answer : (B) Graphite and moving mercury