furnace slag is mainly molten (A) Sand (B) Magnesium silicate (C) Calcium silicate (D) Iron pyrite

furnace slag is mainly molten
(A) Sand
(B) Magnesium silicate
(C) Calcium silicate
(D) Iron pyrite
by

1 Answer

Answer :

Option C
by

Related questions

Slag is a name given for - (1) molten iron (2) molten sand (3) molten alumina (4) molten calcium silicate

Description : Slag is a name given for - (1) molten iron (2) molten sand (3) molten alumina (4) molten calcium silicate

Last Answer : (3) molten alumina Explanation: Slag is a partially vitreous byproduct of the process of smelting ore, which separates the desired metal fraction from the unwanted fraction. A good example is steelmaking ... separated from the metal, and assist in the removal of sulfur and phosphorus from the steel.

Slag is a name given for (1) molten iron (2) molten sand (3) molten alumina (4) molten calcium silicate

Description : Slag is a name given for (1) molten iron (2) molten sand (3) molten alumina (4) molten calcium silicate

Last Answer : molten alumina

Dephosphorization of molten pig iron is favoured by (A) Oxidising and basic slag (B) Reducing and basic slag (C) High activity co-efficient of phosphorous in metal (D) Oxidising and neutral slag

Description : Dephosphorization of molten pig iron is favoured by (A) Oxidising and basic slag (B) Reducing and basic slag (C) High activity co-efficient of phosphorous in metal (D) Oxidising and neutral slag

Last Answer : Option B

Why is slag collected above molten iron?

Description : Why is slag collected above molten iron?

Last Answer : Slag is lighter than molten iron and collects above molten iron. Slag prevents oxidations of molten iron back into iron oxide.

The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All the above

Description : The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All the above

Last Answer : Answer: Option D

The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All these

Description : The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All these

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Roasting is not necessary if iron ore is an oxide (B) Impurities float on the molten iron as slag (C) The slag contains lime about 45% (D) All the above

Description : Pick up the correct statement from the following: (A) Roasting is not necessary if iron ore is an oxide (B) Impurities float on the molten iron as slag (C) The slag contains lime about 45% (D) All the above

Last Answer : Answer: Option D

Micanite is a form of (A) Built up mica. (B) Hydrated potassium aluminium silicate. (C) Magnesium mica. (D) Calcium mica.

Description : Micanite is a form of (A) Built up mica. (B) Hydrated potassium aluminium silicate. (C) Magnesium mica. (D) Calcium mica.

Last Answer : (A) Built up mica.

Specific gravity of hot metal (pig iron) is __________ times that of the blast furnace slag. (A) 2 (B) 3 (C) 0.8 (D) 6

Description : Specific gravity of hot metal (pig iron) is __________ times that of the blast furnace slag. (A) 2 (B) 3 (C) 0.8 (D) 6

Last Answer : (B) 3

Limestone is added in the blast furnace (during pig iron manufacture) to (A) Form slag by combining with impurities (B) Supply heat by undergoing exothermic reaction with impurities (C) Reduce the coke consumption (D) Reduce slag viscosity

Description : Limestone is added in the blast furnace (during pig iron manufacture) to (A) Form slag by combining with impurities (B) Supply heat by undergoing exothermic reaction with impurities (C) Reduce the coke consumption (D) Reduce slag viscosity

Last Answer : Option A

Volume of blast furnace slag is about __________ times the volume of hot metal (pig iron) of the same weight (A) 1.5 (B) 3 (C) 5

Description : Volume of blast furnace slag is about __________ times the volume of hot metal (pig iron) of the same weight (A) 1.5 (B) 3 (C) 5

Last Answer : Option B

Glass is mainly composed of - (1) Sodium silicate (2) Calcium carbonate (3) Calcium hydroxide (4) Sodium bicarbonate

Description : Glass is mainly composed of - (1) Sodium silicate (2) Calcium carbonate (3) Calcium hydroxide (4) Sodium bicarbonate

Last Answer : (1) Sodium silicate Explanation: Glass is made from silica (SiO₂) and soda lime, which react to form sodium silicate.

Early attainment of strength in rapid hardening cement is mainly due to (A) Gypsum (B) Finer grinding (C) Tri-calcium silicate (D) Tri-calcium aluminate

Description : Early attainment of strength in rapid hardening cement is mainly due to (A) Gypsum (B) Finer grinding (C) Tri-calcium silicate (D) Tri-calcium aluminate

Last Answer : Answer: Option B

The slag formed in the blast furnace during the extraction of iron from haematite is

Description : The slag formed in the blast furnace during the extraction of iron from haematite is

Last Answer : The slag formed in the blast furnace during the extraction of iron from haematite is A. `Ca_(3)(PO_(4))_(2)` ... (3)` C. `FeSiO_(3)` D. `MnSiO_(3)`

The fire clay contains pure (A) Lime (B) Oxide of iron (C) Hydrated aluminium silicate (D) Magnesium

Description : The fire clay contains pure (A) Lime (B) Oxide of iron (C) Hydrated aluminium silicate (D) Magnesium

Last Answer : Answer: Option C

During pudding (A) Molten metal is kept clear of the fuel (B) Carbon is converted into carbonic acid gas (C) Silicon forms a slag (D) All the above

Description : During pudding (A) Molten metal is kept clear of the fuel (B) Carbon is converted into carbonic acid gas (C) Silicon forms a slag (D) All the above

Last Answer : Answer: Option D

Name the material which is separated from molten steel during chemical reaction of A.T welding? (i) Aluminium oxide (slag). * (ii) Ferrous Oxide (iii) Aluminium (iv) Ferrous

Description : Name the material which is separated from molten steel during chemical reaction of A.T welding? (i) Aluminium oxide (slag). * (ii) Ferrous Oxide (iii) Aluminium (iv) Ferrous

Last Answer : (i) Aluminium oxide (slag). *

A mixture of haematite, coke and limestone on heating in blast furnace gives molten iron metal. This is known as

Description : A mixture of haematite, coke and limestone on heating in blast furnace gives molten iron metal. This is known as

Last Answer : A mixture of haematite, coke and limestone on heating in blast furnace gives molten iron metal. ... Smelting B. Calcination C. Roasting D. Liquition

In a 100 TPD Sponge Iron plant, the sponge iron is fed to the Induction melting furnace, producing molten steel at 88% yield. The Energy consumption details are as follows: Coal Consumption : 130 TPD GCV of coal : 4500 kcal/kg Power Purchased from Grid : 82400 kWh / day Specific Energy consumption for Kiln producing Sponge Iron: 120 kWh / ton sponge iron Calculate the following 1. Specific Energy Consumption of Induction melting furnace in terms of kWh/ton of molten steel 2. Specific Energy Consumption of the entire plant, in terms of kcal/kg of molten steel (product). 3. Total Energy Consumption of Plant in Tons of Oil Equivalent (TOE )

Description : In a 100 TPD Sponge Iron plant, the sponge iron is fed to the Induction melting furnace,  producing molten steel at 88% yield. The Energy consumption details are as follows: Coal Consumption : 130 ... molten  steel (product). 3. Total Energy Consumption of Plant in Tons of Oil Equivalent (TOE )

Last Answer :  a) Specific Energy Consumption of Induction Melting Furnace  Molten Steel Production from the Induction melting furnace per day  = 100 x 88/100 = 88 TPD Total Energy Consumption of the Plant = 82400 kWh ... mark c) Total Energy consumption of Plant in ToE  = 655864000/107  = 65.586 ToE

Which of the following is the primary reason for adding calcium carbonate to the reduction process of iron oxide ores ? The calcium carbonate: w) acts as an oxidizing agent x) removes silicate waste products y) acts as a reducing agent z) removes sulfur waste products

Description : Which of the following is the primary reason for adding calcium carbonate to the reduction process of iron oxide ores ? The calcium carbonate: w) acts as an oxidizing agent x) removes silicate waste products y) acts as a reducing agent z) removes sulfur waste products

Last Answer : ANSWER: X -- REMOVES SILICATE WASTE PRODUCTS

High ash containing coke (A) Produces more slag when used in the blast(B) Has poor strength and abrasion resistance(C) Is desirable in producer gas manufacture(D) None of these furnace

Description : High ash containing coke (A) Produces more slag when used in the blast furnace (B) Has poor strength and abrasion resistance (C) Is desirable in producer gas manufacture (D) None of these

Last Answer : (A) Produces more slag when used in the blast furnace

Low grade phosphate rock can be used in electrical furnace, because (A) Of the better CaO/SiO2 balance for slag formation (B) CaO content is less (C) It is cheap (D) It produces low cost product

Description : Low grade phosphate rock can be used in electrical furnace, because (A) Of the better CaO/SiO2 balance for slag formation (B) CaO content is less (C) It is cheap (D) It produces low cost product

Last Answer : (A) Of the better CaO/SiO2 balance for slag formation

Pick out the wrong statement. (A) Dry process is used for the manufacture of cement, when the raw material is blast furnace slag (B) Portland cement is made employing wet process (C) Gypsum is added to Portland cement to lengthen its setting time (D) None of these

Description : Pick out the wrong statement. (A) Dry process is used for the manufacture of cement, when the raw material is blast furnace slag (B) Portland cement is made employing wet process (C) Gypsum is added to Portland cement to lengthen its setting time (D) None of these

Last Answer : (D) None of these

Most of the phosphorous present in the blast furnace burden enters into (A) Hot metal (B) Flue gases (C) Slag (D) Refractory lining

Description : Most of the phosphorous present in the blast furnace burden enters into (A) Hot metal (B) Flue gases (C) Slag (D) Refractory lining

Last Answer : (A) Hot metal

Basicity [%Cao + %MgO + %SiO2) of the slag in Indian blast furnace is in the range of (A) 0.7-1.0 (B) 1.1-1.4 (C) 1.5 - 1.8

Description : Basicity [%Cao + %MgO + %SiO2) of the slag in Indian blast furnace is in the range of (A) 0.7-1.0 (B) 1.1-1.4 (C) 1.5 - 1.8

Last Answer : Option B

Diamond is chemically (a) a mixture of metal carbonates (b) pure carbon (c) a pure form of sand (d) a mixture of calcium and magnesium phosphates

Description : Diamond is chemically (a) a mixture of metal carbonates (b) pure carbon (c) a pure form of sand (d) a mixture of calcium and magnesium phosphates

Last Answer : Ans:(b)

The main charge in blast furnace is usually (A) Iron ore & coke (B) Iron ore, coke & air (C) Limestone, coke & iron ore (D) Limestone, sand & iron ore

Description : The main charge in blast furnace is usually (A) Iron ore & coke (B) Iron ore, coke & air (C) Limestone, coke & iron ore (D) Limestone, sand & iron ore

Last Answer : Limestone, coke & iron ore

Sand and __________ is fused at 1300°C, to produce sodium silicate. (A) Limestone (B) Soda ash (C) Coke (D) Sodium sulphate

Description : Sand and __________ is fused at 1300°C, to produce sodium silicate. (A) Limestone (B) Soda ash (C) Coke (D) Sodium sulphate

Last Answer : (B) Soda ash

In the extraction of copper, the slag formed in the blast furnace is

Description : In the extraction of copper, the slag formed in the blast furnace is

Last Answer : In the extraction of copper, the slag formed in the blast furnace is A. `CaSiO_(3)` B. `FeSiO_(3)` C. `FeSiO_(3)` D. `MnSiO_(3)`

What is the viscosity of slag of blast furnace?

Description : What is the viscosity of slag of blast furnace?

Last Answer : What is the answer ?

Which furnace burns low-ash fusion coal and retains most of the coal ash in the slag?

Description : Which furnace burns low-ash fusion coal and retains most of the coal ash in the slag?

Last Answer : Cyclone furnace.

You are asked to construct a massive dam, the type of cement you will use, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Description : You are asked to construct a massive dam, the type of cement you will use, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Last Answer : Answer: Option C

For the construction of thin R.C.C. structures, the type of cement to be avoided, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Description : For the construction of thin R.C.C. structures, the type of cement to be avoided, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Last Answer : Answer: Option D

For road pavements, the cement generally used, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Description : For road pavements, the cement generally used, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Last Answer : Answer: Option B

Blast furnace slag cement concrete requires ___________time for shuttering and curing. (a) Less (b) More (c) Medium (d) All the above

Description : Blast furnace slag cement concrete requires ___________time for shuttering and curing. (a) Less (b) More (c) Medium (d) All the above

Last Answer : (b) More

For mass concrete work, the type of cement preferable is [ A ] Ordinary Portland cement [ B ] Rapid hardening cement [ C ] Low heat cement [ D ] Blast furnace slag cement

Description : For mass concrete work, the type of cement preferable is [ A ] Ordinary Portland cement [ B ] Rapid hardening cement [ C ] Low heat cement [ D ] Blast furnace slag cement

Last Answer : [ C ] Low heat cement

For road pavements, the cement generally used, is [ A ] Ordinary Portland cement [ B ] Rapid hardening cement [ C ] Low heat cement [ D ] Blast furnace slag cement

Description : For road pavements, the cement generally used, is [ A ] Ordinary Portland cement [ B ] Rapid hardening cement [ C ] Low heat cement [ D ] Blast furnace slag cement

Last Answer : [ A ] Ordinary Portland cement

In Portland Blast furnace slag cement, the blast furnace slag content shall not exceed [ A ] 50% [ B ] 65% [ C ] 80% [ D ] 90%

Description : In Portland Blast furnace slag cement, the blast furnace slag content shall not exceed [ A ] 50% [ B ] 65% [ C ] 80% [ D ] 90%

Last Answer : [ B ] 65%

Which cement should not be used for bridge slabs ro RCC frames a) OPC b) Portland Pozzolana cement * c) Portland furnace slag cement d) Rapid hardening cement

Description : Which cement should not be used for bridge slabs ro RCC frames a) OPC b) Portland Pozzolana cement * c) Portland furnace slag cement d) Rapid hardening cement

Last Answer : b) Portland Pozzolana cement *

State the uses of fly ash and blast furnace slag.

Description : State the uses of fly ash and blast furnace slag.

Last Answer :  I) Fly ash The various uses of fly ash are: 1) Concrete production, as a partial substitute material for Portland cement. 2) For the construction of embankments and other structural fills. 3) For ... and water proofing. 5) It is used as insulation in mineral wool, in rail road ballast etc.

Write two uses of each : (i) Fly ash (ii) Blast furnace slag

Description : Write two uses of each : (i) Fly ash (ii) Blast furnace slag

Last Answer : I) Fly ash The various uses of fly ash are: 1) Concrete production, as a partial substitute material for Portland cement. 2) For the construction of embankments and other structural fills. 3) For ... and water proofing. 5) It is used as insulation in mineral wool, in rail road ballast etc. 

Petroleum coke is used mainly in the (A) Discoloration of yellow glycerine (B) Sugar refining (C) Manufacture of carbon electrode (D) Blast furnace for reduction of iron ore

Description : Petroleum coke is used mainly in the (A) Discoloration of yellow glycerine (B) Sugar refining (C) Manufacture of carbon electrode (D) Blast furnace for reduction of iron ore

Last Answer : (C) Manufacture of carbon electrode

The chemical union of iron, oxygen and water forms w) magnetite x) hematite y) limonite z) pyrite

Description : The chemical union of iron, oxygen and water forms w) magnetite x) hematite y) limonite z) pyrite

Last Answer : ANSWER: Y -- LIMONITE

Cinnabar, pyrite and galena are minerals which consist of one or more metals combined with the same element. Which one of the following is the element that is common to all three of these minerals? Is it: w) iron x) copper y) sulfur z) sodium

Description : Cinnabar, pyrite and galena are minerals which consist of one or more metals combined with the same element. Which one of the following is the element that is common to all three of these minerals? Is it: w) iron x) copper y) sulfur z) sodium

Last Answer : ANSWER: C-- SULFUR

Uniform ramming of sand in green sand moulding process leads to (A) Reduced chance of gas porosity (B) Greater dimensional stability of the casting (C) Uniform flow of molten metal into the mould cavity (D) Less sand expansion type of casting defect

Description : Uniform ramming of sand in green sand moulding process leads to (A) Reduced chance of gas porosity (B) Greater dimensional stability of the casting (C) Uniform flow of molten metal into the mould cavity (D) Less sand expansion type of casting defect

Last Answer : Option B

The most common filter aid is (A) Diatomaceous earth (B) Calcium silicate (C) Sodium carbonate (D) Silica gel

Description : The most common filter aid is (A) Diatomaceous earth (B) Calcium silicate (C) Sodium carbonate (D) Silica gel

Last Answer : (A) Diatomaceous earth

Photographic plates are coated with (A) Silver nitrate (B) Silver halide (C) Calcium silicate (D) Metallic silver

Description : Photographic plates are coated with (A) Silver nitrate (B) Silver halide (C) Calcium silicate (D) Metallic silver

Last Answer : (B) Silver halide

Heating of __________ to 120°C, produces plaster of paris. (A) Blue vitriol (B) Gypsum (C) Calcium silicate (D) Calcium sulphate

Description : Heating of __________ to 120°C, produces plaster of paris. (A) Blue vitriol (B) Gypsum (C) Calcium silicate (D) Calcium sulphate

Last Answer : (B) Gypsum

Main constituents of Portland cement are calcium aluminate and (A) Gypsum(B) Silicates(C) Sodium silicate(D) Carbonates

Description : Main constituents of Portland cement are calcium aluminate and (A) Gypsum (B) Silicates (C) Sodium silicate (D) Carbonates

Last Answer : (B) Silicates