The most suitable material for die casting is (A) Iron (B) Copper (C) Steel (D) Nickel

The most suitable material for die casting is
(A) Iron
(B) Copper
(C) Steel
(D) Nickel
by

1 Answer

Answer :

(B) Copper
by

Related questions

For handling sulphuric acid of 95% strength, the suitable material of construction for pipes is (A) Stainless steel (B) Cast iron (C) Aluminium (D) Nickel

Description : For handling sulphuric acid of 95% strength, the suitable material of construction for pipes is (A) Stainless steel (B) Cast iron (C) Aluminium (D) Nickel

Last Answer : (B) Cast iron

Which of the following is the most suitable material of construction for evaporator & its tubes for concentrating NaOH solution to 70%? (A) Cast iron (B) Steel (C) Nickel (D) Karbate

Description : Which of the following is the most suitable material of construction for evaporator & its tubes for concentrating NaOH solution to 70%? (A) Cast iron (B) Steel (C) Nickel (D) Karbate

Last Answer : (C) Nickel

Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber, Kel-F and Teflon (B) Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel

Description : Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber ... Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel

Last Answer : (A) High silicon iron, silicon rubber, Kel-F and Teflon

Cast iron and steel pipes are produced by __________ casting. (A) Die (B) Investment (C) Slush(D) True centrifugal

Description : Cast iron and steel pipes are produced by __________ casting. (A) Die (B) Investment (C) Slush (D) True centrifugal

Last Answer : (D) True centrifugal

A suitable material of construction to use with fuming sulphuric acid is (A) Carbon steel (B) Stainless steel type 304 (C) Nickel (D) Monel

Description : A suitable material of construction to use with fuming sulphuric acid is (A) Carbon steel (B) Stainless steel type 304 (C) Nickel (D) Monel

Last Answer : (D) Monel

Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Last Answer : (D) Brass, cast iron, mild steel and tin

Anodic material used for the cathodic protection of underground buried steel pipeline is (A) Nickel or copper (B) Zinc or magnesium (C) Bronze (D) Brass

Description : Anodic material used for the cathodic protection of underground buried steel pipeline is (A) Nickel or copper (B) Zinc or magnesium (C) Bronze (D) Brass

Last Answer : (B) Zinc or magnesium

Which of the following is the cheapest material of construction for the storage of sodium hydroxide upto a concentration of 75%? (A) Stainless steel (B) Plain carbon steel (C) Nickel (D) Copper

Description : Which of the following is the cheapest material of construction for the storage of sodium hydroxide upto a concentration of 75%? (A) Stainless steel (B) Plain carbon steel (C) Nickel (D) Copper

Last Answer : (B) Plain carbon steel

Which of the following is the most suitable material of construction for the condenser tubes, where the cooling medium is brine (salty water)? (A) Aluminium (B) Copper (C) Titanium (D) Stainless steel

Description : Which of the following is the most suitable material of construction for the condenser tubes, where the cooling medium is brine (salty water)? (A) Aluminium (B) Copper (C) Titanium (D) Stainless steel

Last Answer : Option C

Addition of 2% nickel in steel makes it suitable for making (A) Electronic valves (B) Boiler plates, rivets etc. (C) Turbine blades (D) Connecting rod

Description : Addition of 2% nickel in steel makes it suitable for making (A) Electronic valves (B) Boiler plates, rivets etc. (C) Turbine blades (D) Connecting rod

Last Answer : (B) Boiler plates, rivets etc.

Which of the following alloy steels is the most suitable for making gun barrels and projectiles? (A) Tungsten steel (B) Molybdenum steel (C) Nickel-chrome steel (D) Cobalt steel

Description : Which of the following alloy steels is the most suitable for making gun barrels and projectiles? (A) Tungsten steel (B) Molybdenum steel (C) Nickel-chrome steel (D) Cobalt steel

Last Answer : (C) Nickel-chrome steel

Which of the following would be most suitable for making an electromagnet? (a) Copper (b) Tungsten (c) Soft iron (d) Steel

Description : Which of the following would be most suitable for making an electromagnet? (a) Copper (b) Tungsten (c) Soft iron (d) Steel

Last Answer : Ans:(c)

The most suitable metal for making permanent magnet is a) Iron b) Steel c) Silver d) Copper

Description : The most suitable metal for making permanent magnet is a) Iron b) Steel c) Silver d) Copper

Last Answer : a) Iron

Tubes of multiple effect evaporator used for concentration of sugar cane juice are made of (A) Nickel (B) Copper (C) Stainless steel (D) Brass

Description : Tubes of multiple effect evaporator used for concentration of sugar cane juice are made of (A) Nickel (B) Copper (C) Stainless steel (D) Brass

Last Answer : (B) Copper

Refined acetic acid storage vessel are made of (A) Copper (B) Aluminium (C) High carbon steel (D) Nickel

Description : Refined acetic acid storage vessel are made of (A) Copper (B) Aluminium (C) High carbon steel (D) Nickel

Last Answer : (B) Aluminium

Stainless steel contains (A) Chromium and nickel (B) Copper (C) Aluminium (D) Vanadium

Description : Stainless steel contains (A) Chromium and nickel (B) Copper (C) Aluminium (D) Vanadium

Last Answer : (A) Chromium and nickel

Addition of __________ to steel does not impart hardness. (A) Nickel (B) Copper (C) Chromium (D) Silicon

Description : Addition of __________ to steel does not impart hardness. (A) Nickel (B) Copper (C) Chromium (D) Silicon

Last Answer : : Option B

Addition of __________ to steel does not impart hardness. (A) Nickel (B) Copper (C) Chromium (D) Silicon

Description : Addition of __________ to steel does not impart hardness. (A) Nickel (B) Copper (C) Chromium (D) Silicon

Last Answer : Option B

Specify the material of construction suitable for handling concentrated HNO3 at 100°C. (A) High silicon iron, Kel-F and Teflon (B) Tin and wood (C) Silicone rubber (D) Stainless steel

Description : Specify the material of construction suitable for handling concentrated HNO3 at 100°C. (A) High silicon iron, Kel-F and Teflon (B) Tin and wood (C) Silicone rubber (D) Stainless steel

Last Answer : (A) High silicon iron, Kel-F and Teflon

Most suitable material for high pressure vessel operating at 500 atm. and 500° C is (A) Molybdenum stainless steel(B) 18/8 stainless steel(C) Mild steel(D) High silicon iron (14% Si)

Description : Most suitable material for high pressure vessel operating at 500 atm. and 500° C is (A) Molybdenum stainless steel (B) 18/8 stainless steel (C) Mild steel (D) High silicon iron (14% Si)

Last Answer : (A) Molybdenum stainless steel

Titanium is used in dentistry A. In a very pure form in implants B. In an alloy with aluminium in casting for crowns and bridges C. In an alloy with nickel in orthodontic wires D. A and B E. A, B and C

Description : Titanium is used in dentistry A. In a very pure form in implants B. In an alloy with aluminium in casting for crowns and bridges C. In an alloy with nickel in orthodontic wires D. A and B E. A, B and C

Last Answer : E. A, B and C

For platinum thermocouples, lead wires are made of (A) Copper & copper-nickel alloys (B) Copper & iron (C) Iron & nickel (D) Tin & nickel

Description : For platinum thermocouples, lead wires are made of (A) Copper & copper-nickel alloys (B) Copper & iron (C) Iron & nickel (D) Tin & nickel

Last Answer : (A) Copper & copper-nickel alloys

Invar used in thermocouples is an alloy of nickel and (A) Iron (B) Copper (C) Chromium (D) Lead

Description : Invar used in thermocouples is an alloy of nickel and (A) Iron (B) Copper (C) Chromium (D) Lead

Last Answer : (A) Iron

Spark plugs, ignition tubes and electrodes are made of nickel __________ alloys. (A) Beryllium (B) Manganese (C) Copper (D) Iron

Description : Spark plugs, ignition tubes and electrodes are made of nickel __________ alloys. (A) Beryllium (B) Manganese (C) Copper (D) Iron

Last Answer : (B) Manganese

Inconel is an alloy of (A) Tin, zinc and nicke(B) Iron, nickel and chromium(C) Copper and nickel(D) Copper and tin

Description : Inconel is an alloy of (A) Tin, zinc and nicke (B) Iron, nickel and chromium (C) Copper and nickel (D) Copper and tin

Last Answer : (B) Iron, nickel and chromium

An alloy used as thermocouple material comprises of 40% nickel and60% copper. It is called(A) Constantan(B) Kanthal(C) Chromel(D) German silver

Description : An alloy used as thermocouple material comprises of 40% nickel and60% copper. It is called (A) Constantan (B) Kanthal (C) Chromel (D) German silver

Last Answer : (A) Constantan

Stainless steel is usually made by alloying the steel with – (1) copper and nickel (2) copper and chromium (3) chromium and nickel (4) manganese and copper

Description : Stainless steel is usually made by alloying the steel with – (1) copper and nickel (2) copper and chromium (3) chromium and nickel (4) manganese and copper

Last Answer : (3) chromium and nickel Explanation: In metallurgy, stainless steel is defined as a steel alloy with a minimum of 10.5 per cent to 11 per cent chromium content by mass. There are ... virtually nonmagnetic and less brittle at low temperatures. For greater hardness and strength, more carbon is added.

Which of the following is an important element of stainless steel. w) chromium x) magnesium y) copper z) nickel

Description : Which of the following is an important element of stainless steel. w) chromium x) magnesium y) copper z) nickel  

Last Answer : ANSWER: W -- CHROMIUM  

Stainless steel is usually made by alloying the steel with (1) copper and nickel (2) copper and chromium (3) chromium and nickel (4) manganese and copper

Description : Stainless steel is usually made by alloying the steel with (1) copper and nickel (2) copper and chromium (3) chromium and nickel (4) manganese and copper

Last Answer : chromium and nickel 

Soap kettle used in the production of laundry soap is made of (A) Steel with top section nickel clad or stainless steel (B) Cast iron (C) Nickel (D) Concrete

Description : Soap kettle used in the production of laundry soap is made of (A) Steel with top section nickel clad or stainless steel (B) Cast iron (C) Nickel (D) Concrete

Last Answer : (A) Steel with top section nickel clad or stainless steel

Phenol is not shipped in (A) Nickel lined steel tank cars (B) Galvanised or tin lined drums (C) Boxed glass carboys (D) Cast iron containers

Description : Phenol is not shipped in (A) Nickel lined steel tank cars (B) Galvanised or tin lined drums (C) Boxed glass carboys (D) Cast iron containers

Last Answer : (D) Cast iron containers

Vessels made of __________ can be used to store dry chlorine. (A) Thermoplastic materials (B) Nickel (C) Steel or iron (D) None of these

Description : Vessels made of __________ can be used to store dry chlorine. (A) Thermoplastic materials (B) Nickel (C) Steel or iron (D) None of these

Last Answer : (C) Steel or iron

Dry chlorine can be handled in a vessel made of (A) Iron or steel (B) PVC (C) Nickel (D) Brass

Description : Dry chlorine can be handled in a vessel made of (A) Iron or steel (B) PVC (C) Nickel (D) Brass

Last Answer : (A) Iron or steel

Polymerisation reactor used in the production of styrene butadiene rubber (SBR) is made of (A) Stainless steel or glass lined steel (B) Nickel clad steel (C) High silicon cast iron (D) Aluminium

Description : Polymerisation reactor used in the production of styrene butadiene rubber (SBR) is made of (A) Stainless steel or glass lined steel (B) Nickel clad steel (C) High silicon cast iron (D) Aluminium

Last Answer : (A) Stainless steel or glass lined steel

Evaporator used for concentrating tomato juice is made of (A) Nickel (B) Brass (C) Stainless steel-glass lined (D) Cast iron-rubber lined

Description : Evaporator used for concentrating tomato juice is made of (A) Nickel (B) Brass (C) Stainless steel-glass lined (D) Cast iron-rubber lined

Last Answer : (C) Stainless steel-glass lined

Work hardenable alloy steel used to make the bucket wheel excavators, blades of bulldozers and other earth moving equipments contain iron, carbon and (A) Manganese (B) Silicon (C) Nickel (D) Chromium

Description : Work hardenable alloy steel used to make the bucket wheel excavators, blades of bulldozers and other earth moving equipments contain iron, carbon and (A) Manganese (B) Silicon (C) Nickel (D) Chromium

Last Answer : (A) Manganese

Which material is suitable for shaft material? a. High speed steel b. Stainless steel or high carbon steel c. Grey cast iron d. Steel having approx. 0.4% carbon and 0.8% manganese

Description : Which material is suitable for shaft material? a. High speed steel b. Stainless steel or high carbon steel c. Grey cast iron d. Steel having approx. 0.4% carbon and 0.8% manganese

Last Answer : d. Steel having approx. 0.4% carbon and 0.8% manganese

Which of the following imparts a blue colour to glass? (1) Cobalt oxide (2) Copper oxide (3) Iron oxide (4) Nickel oxide

Description : Which of the following imparts a blue colour to glass? (1) Cobalt oxide (2) Copper oxide (3) Iron oxide (4) Nickel oxide

Last Answer : (1) Cobalt oxide Explanation: The addition of oxides, sulfides, salts, and other compounds of different metals to molten glass at the time of manufacture adds colour to glass. The introduction of ... colour; copper oxide: turquoise; chromium: dark green to black; cadmium sulfide: deep yellow, etc.

In galvanization, iron is coated with – (1) Copper (2) Zinc (3) Tin (4) Nickel

Description : In galvanization, iron is coated with – (1) Copper (2) Zinc (3) Tin (4) Nickel

Last Answer : (2) Zinc Explanation: Galvanization is the process of applying a protective zinc coating to steel or iron, to prevent rusting. The most common method is hot-dip galvanization, in which parts are submerged in a bath of molten zinc.

Bronze is an alloy of – (1) Copper & tin (2) Copper & zinc (3) Copper & iron (4) Iron & nickel

Description : Bronze is an alloy of – (1) Copper & tin (2) Copper & zinc (3) Copper & iron (4) Iron & nickel

Last Answer : (1) Copper & tin Explanation: Bronze is an alloy consisting primarily of copper, commonly with about 12% tin and often with the addition of other metals (such as aluminium, manganese, nickel or zinc ... produce a range of alloys that may be harder than copper alone, or have other useful properties.

Most conducting materials such as copper, aluminum, iron, nickel, and tungsten _____________. A. increase in resistance with increased temperature B. increase in resistance with decreased temperature C. decrease in resistance with increased temperature D. increase in conductance with increased temperature

Description : Most conducting materials such as copper, aluminum, iron, nickel, and tungsten _____________. A. increase in resistance with increased temperature B. increase in resistance with decreased ... C. decrease in resistance with increased temperature D. increase in conductance with increased temperature

Last Answer : Answer: A

In which of the following all three are macronutrients? (a) Molybdenum, magnesium, manganese (b) Nitrogen, nickel, phosphorus (c) Boron, zinc, manganese (d) Iron, copper, molybdenum

Description : In which of the following all three are macronutrients? (a) Molybdenum, magnesium, manganese (b) Nitrogen, nickel, phosphorus (c) Boron, zinc, manganese (d) Iron, copper, molybdenum

Last Answer : (d) Iron, copper, molybdenum

Why for chromium plating iron is firstly platted by copper or nickel?

Description : Why for chromium plating iron is firstly platted by copper or nickel?

Last Answer : Ans: Because chromium metal doesn’t adhere directly to the iron properly so it is firstly plated with nickel or copper.

Bronze is an alloy of (1) Copper & tin (2) Copper & zinc (3) Copper & iron (4) Iron & nickel

Description : Bronze is an alloy of (1) Copper & tin (2) Copper & zinc (3) Copper & iron (4) Iron & nickel 

Last Answer :  Copper & tin

In galvanization, iron is coated with (1) Copper (2) Zinc (3) Tin (4) Nickel

Description : In galvanization, iron is coated with (1) Copper (2) Zinc (3) Tin (4) Nickel 

Last Answer : Zinc

Which of the following imparts a blue colour to glass ? (1) Cabalt oxide (2) Copper oxide (3) Iron oxide (4) Nickel oxide

Description : Which of the following imparts a blue colour to glass ? (1) Cabalt oxide (2) Copper oxide (3) Iron oxide (4) Nickel oxide

Last Answer : Cabalt oxide

'Corrosion-resistant material' and 'noncorrodible material' will include which of the following ____________. A. plastics B. silver C. copper-nickel D. all of the above

Description : 'Corrosion-resistant material' and 'noncorrodible material' will include which of the following ____________. A. plastics B. silver C. copper-nickel D. all of the above

Last Answer : Answer: D

Which of the following is a ferromagnetic material ? A. Tungsten B. Aluminium C. Copper D. Nickel (Answer)

Description : Which of the following is a ferromagnetic material ? A. Tungsten B. Aluminium C. Copper D. Nickel (Answer)

Last Answer : D. Nickel (Answer)

Which of the following is a ferromagnetic material ? (a) Tungsten (b) Aluminium (c) Copper (d) Nickel

Description : Which of the following is a ferromagnetic material ? (a) Tungsten (b) Aluminium (c) Copper (d) Nickel

Last Answer : (d) Nickel

Zircaloy used as a fuel cladding material in a nuclear reactor (thermal) is an alloy of zirconium (A) Tin, nickel, iron and chromium (B) And graphite

Description : Zircaloy used as a fuel cladding material in a nuclear reactor (thermal) is an alloy of zirconium (A) Tin, nickel, iron and chromium (B) And graphite

Last Answer : (A) Tin, nickel, iron and chromium