Vessels made of __________ can be used to store dry chlorine. (A) Thermoplastic materials (B) Nickel (C) Steel or iron (D) None of these

Vessels made of __________ can be used to store dry chlorine.
(A) Thermoplastic materials
(B) Nickel
(C) Steel or iron
(D) None of these
by

1 Answer

Answer :

(C) Steel or iron
by

Related questions

Dry chlorine can be handled in a vessel made of (A) Iron or steel (B) PVC (C) Nickel (D) Brass

Description : Dry chlorine can be handled in a vessel made of (A) Iron or steel (B) PVC (C) Nickel (D) Brass

Last Answer : (A) Iron or steel

Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber, Kel-F and Teflon (B) Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel

Description : Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber ... Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel

Last Answer : (A) High silicon iron, silicon rubber, Kel-F and Teflon

Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Last Answer : (D) Brass, cast iron, mild steel and tin

Out of the following, copper vessels are the most suitable for the storage of (A) Bromine (B) Dry chlorine & dry fluorine (C) Nitric acid (95% and fuming) (D) Phosphoric acid (95%) & sulphuric acid (95% and fuming)

Description : Out of the following, copper vessels are the most suitable for the storage of (A) Bromine (B) Dry chlorine & dry fluorine (C) Nitric acid (95% and fuming) (D) Phosphoric acid (95%) & sulphuric acid (95% and fuming)

Last Answer : (B) Dry chlorine & dry fluorine

Brine solution is stored/treated in __________ lined vessels/pipes. (A) Rubber (B) Lead (C) Glass (D) Nickel

Description : Brine solution is stored/treated in __________ lined vessels/pipes. (A) Rubber (B) Lead (C) Glass (D) Nickel

Last Answer : (D) Nickel

Soap kettle used in the production of laundry soap is made of (A) Steel with top section nickel clad or stainless steel (B) Cast iron (C) Nickel (D) Concrete

Description : Soap kettle used in the production of laundry soap is made of (A) Steel with top section nickel clad or stainless steel (B) Cast iron (C) Nickel (D) Concrete

Last Answer : (A) Steel with top section nickel clad or stainless steel

Polymerisation reactor used in the production of styrene butadiene rubber (SBR) is made of (A) Stainless steel or glass lined steel (B) Nickel clad steel (C) High silicon cast iron (D) Aluminium

Description : Polymerisation reactor used in the production of styrene butadiene rubber (SBR) is made of (A) Stainless steel or glass lined steel (B) Nickel clad steel (C) High silicon cast iron (D) Aluminium

Last Answer : (A) Stainless steel or glass lined steel

Evaporator used for concentrating tomato juice is made of (A) Nickel (B) Brass (C) Stainless steel-glass lined (D) Cast iron-rubber lined

Description : Evaporator used for concentrating tomato juice is made of (A) Nickel (B) Brass (C) Stainless steel-glass lined (D) Cast iron-rubber lined

Last Answer : (C) Stainless steel-glass lined

Thermoplastic materials (A) Do not soften on application of heat (B) Are heavily branched molecules (C) Are solvent insoluble (D) None of these

Description : Thermoplastic materials (A) Do not soften on application of heat (B) Are heavily branched molecules (C) Are solvent insoluble (D) None of these

Last Answer : (D) None of these

All thermoplastic, thermosetting & elastic materials can be processed in a extrusion machine, however it cannot be used for the production of plastic (A) Filaments (B) Pipes (C) Buckets (D) Tubings

Description : All thermoplastic, thermosetting & elastic materials can be processed in a extrusion machine, however it cannot be used for the production of plastic (A) Filaments (B) Pipes (C) Buckets (D) Tubings

Last Answer : (C) Buckets

Thermoplastic materials (A) Do not soften on application of heat (B) Are heavily branched molecules (C) Are solvent insoluble (D) None of these

Description : Thermoplastic materials (A) Do not soften on application of heat (B) Are heavily branched molecules (C) Are solvent insoluble (D) None of these

Last Answer : (D) None of these

Hydrocyanic acid is not shipped in (A) Cast iron vessels (B) Steel cylinders (C) Aluminium containers (D) Monel drums

Description : Hydrocyanic acid is not shipped in (A) Cast iron vessels (B) Steel cylinders (C) Aluminium containers (D) Monel drums

Last Answer : (A) Cast iron vessels

________ is an alloy made from iron , chromium and nickel . a) stainless steel b)steel c)brass d)bronze

Description : ________ is an alloy made from iron , chromium and nickel . a) stainless steel b)steel c)brass d)bronze

Last Answer : a) stainless steel

Which of the following are alloying materials used the manufacture of stainless steel? w) Limestone and carbon x) Calcium oxide and oxygen y) Oxygen and sulfur dioxide z) Chromium and nickel

Description : Which of the following are alloying materials used the manufacture of stainless steel? w) Limestone and carbon x) Calcium oxide and oxygen y) Oxygen and sulfur dioxide z) Chromium and nickel

Last Answer : ANSWER: Z -- CHROMIUM AND NICKEL

Spark plugs, ignition tubes and electrodes are made of nickel __________ alloys. (A) Beryllium (B) Manganese (C) Copper (D) Iron

Description : Spark plugs, ignition tubes and electrodes are made of nickel __________ alloys. (A) Beryllium (B) Manganese (C) Copper (D) Iron

Last Answer : (B) Manganese

Phenol is not shipped in (A) Nickel lined steel tank cars (B) Galvanised or tin lined drums (C) Boxed glass carboys (D) Cast iron containers

Description : Phenol is not shipped in (A) Nickel lined steel tank cars (B) Galvanised or tin lined drums (C) Boxed glass carboys (D) Cast iron containers

Last Answer : (D) Cast iron containers

For handling sulphuric acid of 95% strength, the suitable material of construction for pipes is (A) Stainless steel (B) Cast iron (C) Aluminium (D) Nickel

Description : For handling sulphuric acid of 95% strength, the suitable material of construction for pipes is (A) Stainless steel (B) Cast iron (C) Aluminium (D) Nickel

Last Answer : (B) Cast iron

Which of the following is the most suitable material of construction for evaporator & its tubes for concentrating NaOH solution to 70%? (A) Cast iron (B) Steel (C) Nickel (D) Karbate

Description : Which of the following is the most suitable material of construction for evaporator & its tubes for concentrating NaOH solution to 70%? (A) Cast iron (B) Steel (C) Nickel (D) Karbate

Last Answer : (C) Nickel

Work hardenable alloy steel used to make the bucket wheel excavators, blades of bulldozers and other earth moving equipments contain iron, carbon and (A) Manganese (B) Silicon (C) Nickel (D) Chromium

Description : Work hardenable alloy steel used to make the bucket wheel excavators, blades of bulldozers and other earth moving equipments contain iron, carbon and (A) Manganese (B) Silicon (C) Nickel (D) Chromium

Last Answer : (A) Manganese

The most suitable material for die casting is (A) Iron (B) Copper (C) Steel (D) Nickel

Description : The most suitable material for die casting is (A) Iron (B) Copper (C) Steel (D) Nickel

Last Answer : (B) Copper

Ammonium chloride solution is stored/ treated in __________ vessels/pipes. (A) Plain carbon steel (B) Stainless steel (C) Rubber or durmet-20 lined (D) Lead

Description : Ammonium chloride solution is stored/ treated in __________ vessels/pipes. (A) Plain carbon steel (B) Stainless steel (C) Rubber or durmet-20 lined (D) Lead

Last Answer : (C) Rubber or durmet-20 lined

Whic of the following pairs of materials serves as electrodes in chargeable batteries commonly used in devices such as torch lights, electric shavers, etc.? (1) Iron and cadmium (2) Nickel and cadmium (3) Lead peroxide and lead (4) Zinc and carbon

Description : Whic of the following pairs of materials serves as electrodes in chargeable batteries commonly used in devices such as torch lights, electric shavers, etc.? (1) Iron and cadmium (2) Nickel and cadmium (3) Lead peroxide and lead (4) Zinc and carbon

Last Answer : (2) Nickel and cadmium Explanation: A rechargeable battery, storage battery, or accumulator is a type of electrical battery. It comprises one or more electrochemical cells, and is a ... sizes, ranging from button cells to megawatt systems connected to stabilize an electrical distribution network.

Most conducting materials such as copper, aluminum, iron, nickel, and tungsten _____________. A. increase in resistance with increased temperature B. increase in resistance with decreased temperature C. decrease in resistance with increased temperature D. increase in conductance with increased temperature

Description : Most conducting materials such as copper, aluminum, iron, nickel, and tungsten _____________. A. increase in resistance with increased temperature B. increase in resistance with decreased ... C. decrease in resistance with increased temperature D. increase in conductance with increased temperature

Last Answer : Answer: A

Which of the following materials are used in the manufacture of pig iron from iron ore? w) Limestone and carbon x) Calcium oxide and oxygen y) Chromium and nickel z) Oxygen and sulfur dioxide

Description : Which of the following materials are used in the manufacture of pig iron from iron ore? w) Limestone and carbon x) Calcium oxide and oxygen y) Chromium and nickel z) Oxygen and sulfur dioxide

Last Answer : ANSWER: W -- LIMESTONE AND CARBON

Which of the following pairs of materials serves as electrodes in chargeable batteries commonly used in devices such as torch lights, electric shavers, etc. ? (1) Iron and cadmium (2) Nickel and cadmium (3) Lead peroxide and lead (4) Zinc and carbon

Description : Which of the following pairs of materials serves as electrodes in chargeable batteries commonly used in devices such as torch lights, electric shavers, etc. ? (1) Iron and cadmium (2) Nickel and cadmium (3) Lead peroxide and lead (4) Zinc and carbon

Last Answer : Nickel and cadmium

Pick out the wrong statement. (A) A ferromagnetic material becomes paramagnetic above the 'Curie temperature' (B) Permanent magnets are made of hard materials, whereas electromagnets require soft magnetic materials (C) Soft magnetic materials (e.g., pure iron) have higher permeability and low hysterisis loss and coercive forces (D) Tungsten steel and alnico are not hard magnetic materials

Description : Pick out the wrong statement. (A) A ferromagnetic material becomes paramagnetic above the 'Curie temperature' (B) Permanent magnets are made of hard materials, whereas electromagnets require soft ... hysterisis loss and coercive forces (D) Tungsten steel and alnico are not hard magnetic materials

Last Answer : Option D

Polymethyl methacrylate (PMMA) which is also known as Perspex and is produced by bulk polymerisation of methyl methacrylate is not a __________ polymer. (A) Thermoplastic (B) Thermosetting (C) Linear (D) Glass like transparent

Description : Polymethyl methacrylate (PMMA) which is also known as Perspex and is produced by bulk polymerisation of methyl methacrylate is not a __________ polymer. (A) Thermoplastic (B) Thermosetting (C) Linear (D) Glass like transparent

Last Answer : (B) Thermosetting

Poly Vinyl chloride (PVC) is a __________ material. (A) Thermoplastic (B) Thermosetting (C) Fibrous (D) Chemically active

Description : Poly Vinyl chloride (PVC) is a __________ material. (A) Thermoplastic (B) Thermosetting (C) Fibrous (D) Chemically active

Last Answer : (A) Thermoplastic

__________ polymer is used for making unbreakable crockery. (A) Thermoplastic (B) Melamine (C) Addition (D) None of these

Description : __________ polymer is used for making unbreakable crockery. (A) Thermoplastic (B) Melamine (C) Addition (D) None of these

Last Answer : (B) Melamine

Cross linked polymers formed from bi-and trifunctional groups in which cross-linkage in three dimensions via few chemical bonding across linear chains occur imparts to the polymer __________ properties. (A) Thermoplastic (B) Thermosetting (C) Elastometric (D) Brittleness

Description : Cross linked polymers formed from bi-and trifunctional groups in which cross-linkage in three dimensions via few chemical bonding across linear chains occur imparts to the polymer __________ properties. (A) Thermoplastic (B) Thermosetting (C) Elastometric (D) Brittleness

Last Answer : (C) Elastometric

__________ moulding process cannot be used for thermoplastic plastics. (A) Compression (B) Extrusion (C) Injection (D) None of these

Description : __________ moulding process cannot be used for thermoplastic plastics. (A) Compression (B) Extrusion (C) Injection (D) None of these

Last Answer : (C) Injection

Poly Vinyl Chloride (P.V.C.) is a __________ material. (A) Thermosetting (B) Thermoplastic (C) Fibrous (D) Chemically active

Description : Poly Vinyl Chloride (P.V.C.) is a __________ material. (A) Thermosetting (B) Thermoplastic (C) Fibrous (D) Chemically active

Last Answer : (B) Thermoplastic

__________ is added in stainless steel to prevent inter crystal corrosion. (A) Vanadium (B) Niobium (C) Chromium (D) Nickel

Description : __________ is added in stainless steel to prevent inter crystal corrosion. (A) Vanadium (B) Niobium (C) Chromium (D) Nickel

Last Answer : (B) Niobium

__________ steel is widely used for the manufacture of motor car crankshafts. (A) Silicon (B) Nickel (C) Chrome (D) High speed

Description : __________ steel is widely used for the manufacture of motor car crankshafts. (A) Silicon (B) Nickel (C) Chrome (D) High speed

Last Answer : (C) Chrome

A steel alloy containing 36% nickel is called __________, which has a zero co-efficient of expansion. (A) Austenitic stainless steel (B) Heat resisting steel (C) Invar (D) High speed steel

Description : A steel alloy containing 36% nickel is called __________, which has a zero co-efficient of expansion. (A) Austenitic stainless steel (B) Heat resisting steel (C) Invar (D) High speed steel

Last Answer : (C) Invar

Addition of __________ in steel can help in increasing the depth of hardness. (A) Nickel (B) Chromium (C) Vanadium (D) Tungsten

Description : Addition of __________ in steel can help in increasing the depth of hardness. (A) Nickel (B) Chromium (C) Vanadium (D) Tungsten

Last Answer : (D) Tungsten

Fermenter used in the production of penicillin by deep fermentation process is a __________ lined steel vessel (A) Rubber (B) Monel (C) Glass (D) Nickel

Description : Fermenter used in the production of penicillin by deep fermentation process is a __________ lined steel vessel (A) Rubber (B) Monel (C) Glass (D) Nickel

Last Answer : (C) Glass

Addition of __________ to the steel helps in increasing the residual magnetism in steel used for making magnets. (A) Chromium (B) Nickel (C) Tungsten (D) Cobalt

Description : Addition of __________ to the steel helps in increasing the residual magnetism in steel used for making magnets. (A) Chromium (B) Nickel (C) Tungsten (D) Cobalt

Last Answer : (D) Cobalt

Molten phthalic anhydride is stored in a/an __________ vessel. (A) Aluminium (B) Nickel clad steel (C) Lead lined steel (D) Glass lined steel

Description : Molten phthalic anhydride is stored in a/an __________ vessel. (A) Aluminium (B) Nickel clad steel (C) Lead lined steel (D) Glass lined steel

Last Answer : (A) Aluminium

Steel containing low percentage of nickel, chromium & tungsten are termed as the __________ steel. (A) Wrought (B) Tool (C) Alloy (D) Plain carbon

Description : Steel containing low percentage of nickel, chromium & tungsten are termed as the __________ steel. (A) Wrought (B) Tool (C) Alloy (D) Plain carbon

Last Answer : (D) Plain carbon

Addition of __________ to steel does not impart hardness. (A) Nickel (B) Copper (C) Chromium (D) Silicon

Description : Addition of __________ to steel does not impart hardness. (A) Nickel (B) Copper (C) Chromium (D) Silicon

Last Answer : : Option B

Addition of __________ to steel does not impart hardness. (A) Nickel (B) Copper (C) Chromium (D) Silicon

Description : Addition of __________ to steel does not impart hardness. (A) Nickel (B) Copper (C) Chromium (D) Silicon

Last Answer : Option B

Nickel and __________ are the alloying element added in steel to increase its toughness. (A) Molybdenum(B) Chromium(C) Vanadium(D) Silicon

Description : Nickel and __________ are the alloying element added in steel to increase its toughness. (A) Molybdenum (B) Chromium (C) Vanadium (D) Silicon

Last Answer : Option D

Which of the following battery is used for aircraft? A. Lead acid battery B. Nickel-iron battery C. Dry cell battery D. Silver oxide battery

Description : Which of the following battery is used for aircraft? A. Lead acid battery B. Nickel-iron battery C. Dry cell battery D. Silver oxide battery

Last Answer : B. Nickel-iron battery

Which of the following elements is not present in stainless steel? (1) Iron (2) Tungsten (3) Chromium (4) Nickel

Description : Which of the following elements is not present in stainless steel? (1) Iron (2) Tungsten (3) Chromium (4) Nickel

Last Answer : (2) Tungsten Explanation: Stainless steel is defined as a steel alloy of iron with a minimum of 10.5% to 11% chromium content by mass. There are different types of stainless steels: ... stabilized. This crystal structure makes such steels virtually non-magnetic and less brittle at low temperatures.

Magnetic keepers are pieces of – (1) Nickel (2) Cobalt (3) Steel (4) Soft iron

Description : Magnetic keepers are pieces of – (1) Nickel (2) Cobalt (3) Steel (4) Soft iron

Last Answer : (4) Soft iron Explanation: Magnetic keepers arc pieces of soft iron that are placed across the poles of a bar magnet or a horseshoe magnet. They help prevent the loss of magnetism.

Electromagnet is constructed with which of the following? (1) Steel (2) Soft Iron (3) Aluminium (4) Nickel

Description : Electromagnet is constructed with which of the following? (1) Steel (2) Soft Iron (3) Aluminium (4) Nickel

Last Answer : (2) Soft Iron Explanation: An electromagnet is a type of magnet in which the magnetic field is produced by an electric current. The magnetic field disappears when the current is turned off. It is made of soft iron since it has the property of losing its magnetism very quickly.

Steel is composed of a number of elements. The two essential elements are iron and w) aluminum x) carbon y) nickel z) silicon

Description : Steel is composed of a number of elements. The two essential elements are iron and w) aluminum x) carbon y) nickel z) silicon 

Last Answer : ANSWER: X -- CARBON

Which of the following elements is not present in stainless steel? (1) Iron (2) Tungsten (3) Chromium(4) Nickel

Description : Which of the following elements is not present in stainless steel? (1) Iron (2) Tungsten (3) Chromium(4) Nickel

Last Answer : Tungsten

Electromagnet is constructed with which of the following ? (1) Steel (2) Soft Iron (3) Aluminium (4) Nickel

Description : Electromagnet is constructed with which of the following ? (1) Steel (2) Soft Iron (3) Aluminium (4) Nickel

Last Answer : Soft Iron