Identify the correct statement with reference to the extractive metallurgy of aluminium. (A) The electrolyte consists of molten Na3AlF6 with approximately 1 to 8% Al2O3 (B) Approximately 80% of the aluminium deposited on the cathode comes from cryolite (C) Sodium is deposited along with aluminium, but is immediately vaporised (D) Anode effect sets in when the cryolite concentration goes below 40%.

Identify the correct statement with reference to the extractive metallurgy of aluminium.
(A) The electrolyte consists of molten Na3AlF6 with approximately 1 to 8% Al2O3
(B) Approximately 80% of the aluminium deposited on the cathode comes from cryolite
(C) Sodium is deposited along with aluminium, but is immediately vaporised (D) Anode effect sets in when the cryolite concentration goes below 40%.
by

1 Answer

Answer :

(A) The electrolyte consists of molten Na3AlF6 with approximately 1 to 8% Al2O3
by

Related questions

36. Aluminium is extracted from alumina (Al2O3 ) by electrolysis of a molten mixture of : (1) Al2O3 + KF + Na3AlF6 (2) Al2O3 + HF + NaAlF4 (3) Al2O3 + CaF2 + NaAlF4 (4) Al2O3 + Na3AlF6 + CaF2

Description : 36. Aluminium is extracted from alumina (Al2O3 ) by electrolysis of a molten mixture of : (1) Al2O3 + KF + Na3AlF6 (2) Al2O3 + HF + NaAlF4 (3) Al2O3 + CaF2 + NaAlF4 (4) Al2O3 + Na3AlF6 + CaF2

Last Answer : Al2O3 + Na3AlF6 + CaF2

Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. Coke powder is spreadded over the molten electro

Description : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. Coke powder is spreadded over the molten electro

Last Answer : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. ... of molten aluminium by air D. (a) both (b)

In electro-refining, the pure metal is deposited on – (1) vessel (2) electrolyte (3) cathode (4) anode

Description : In electro-refining, the pure metal is deposited on – (1) vessel (2) electrolyte (3) cathode (4) anode

Last Answer : (3) cathode Explanation: In electro-refining, the anodes consist of unrefined impure metal, and as the current passes through the acidic electrolyte the anodes are corroded into the solution so ... pure metal onto the cathodes. Electrolytic refining is used to extract impurities from crude metals.

In electro-refining, the pure metal is deposited on (1) vessel (2) electrolyte (3) cathode (4) anode

Description : In electro-refining, the pure metal is deposited on (1) vessel (2) electrolyte (3) cathode (4) anode

Last Answer : cathode

In extractive metallurgy of lead, the reduction of the roasted ore to the molten metal by heating with coke is called

Description : In extractive metallurgy of lead, the reduction of the roasted ore to the molten metal by heating with coke is called

Last Answer : In extractive metallurgy of lead, the reduction of the roasted ore to the molten metal by heating with ... B. roasting C. calcination D. None of these

Electrolytic reducation of `Al_(2)O_(3)` Electrolyte `(Al_(2)O_(3)+cryolite)` Cathode : fraphite inside Fe -Container Pick out the statement which is

Description : Electrolytic reducation of `Al_(2)O_(3)` Electrolyte `(Al_(2)O_(3)+cryolite)` Cathode : fraphite inside Fe -Container Pick out the statement which is

Last Answer : Electrolytic reducation of `Al_(2)O_(3)` Electrolyte `(Al_(2)O_(3)+cryolite)` Cathode : fraphite ... 2)` D. nikkel may be affected at high temperature

Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. The purpose of adding crylite is :

Description : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. The purpose of adding crylite is :

Last Answer : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. ... . to increase melting point of `Al_(2)O_(3)`

Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. What is wrong if anode is made of nickel instant

Description : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. What is wrong if anode is made of nickel instant

Last Answer : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite ... CO D. Nickel May be affected by high temperature.

The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All the above

Description : The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All the above

Last Answer : Answer: Option D

The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All these

Description : The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All these

Last Answer : Answer: Option D

Electrolytic reducation of `Al_(2)O_(3)` Electrolyte `(Al_(2)O_(3)+cryolite)` Cathode : fraphite inside Fe -Container Coke power is spreased over the

Description : Electrolytic reducation of `Al_(2)O_(3)` Electrolyte `(Al_(2)O_(3)+cryolite)` Cathode : fraphite inside Fe -Container Coke power is spreased over the

Last Answer : Electrolytic reducation of `Al_(2)O_(3)` Electrolyte `(Al_(2)O_(3)+cryolite)` Cathode : fraphite inside Fe ... aluminmum by air D. (A) and (B) both

Electrolytic reducation of `Al_(2)O_(3)` Electrolyte `(Al_(2)O_(3)+cryolite) ` Cathode : fraphite inside Fe -Container The purpose of adding cryolite

Description : Electrolytic reducation of `Al_(2)O_(3)` Electrolyte `(Al_(2)O_(3)+cryolite) ` Cathode : fraphite inside Fe -Container The purpose of adding cryolite

Last Answer : Electrolytic reducation of `Al_(2)O_(3)` Electrolyte `(Al_(2)O_(3)+cryolite) ` Cathode : fraphite inside ... the impurities as slag D. Both (a) & (B)

Aluminium is extracted from bauxite (a) By reduction with carbon (b) By reduction with Mg (c) By reduction with CO (d) By electrolysis in molten cryolite

Description : Aluminium is extracted from bauxite (a) By reduction with carbon (b) By reduction with Mg (c) By reduction with CO (d) By electrolysis in molten cryolite

Last Answer : Ans:(d)

What is the role of molten cryolite in the extraction of aluminium?

Description : What is the role of molten cryolite in the extraction of aluminium?

Last Answer : When pure alumina is mixed with molten cryolite, it forms an electrolyte at 1223K. Molten cryolite also acts as a solvent for alumina.

Which of the following statement is incorrect about the extractive metallurgy of coper?

Description : Which of the following statement is incorrect about the extractive metallurgy of coper?

Last Answer : Which of the following statement is incorrect about the extractive metallurgy of coper? A. Matte ... Bessomer converter is called as blister copper.

Inverter cell anode and cathode of the…………. cell is used for vehicle (a) Copper electrode zinc (b)Zinc copper (c) Aluminium zinc (d)Nickel Cobalt

Description : Inverter cell anode and cathode of the…………. cell is used for vehicle (a) Copper electrode zinc (b)Zinc copper (c) Aluminium zinc (d)Nickel Cobalt

Last Answer : (a) Copper electrode zinc

The component labeled 'CR1' in the circuit shown in the illustration __________________. EL-0085 A. varies its anode/cathode polarity depending on 'RL' current B. rectifies the varying voltage from the collector of 'Q1' C. acts as a low capacitive reactance to smooth ripple D. establishes a constant reference voltage for the base of 'Q1'

Description : The component labeled 'CR1' in the circuit shown in the illustration __________________. EL-0085 A. varies its anode/cathode polarity depending on 'RL' current B. rectifies the varying voltage from the ... reactance to smooth ripple D. establishes a constant reference voltage for the base of 'Q1'

Last Answer : Answer: D

The Al2O3 content of cryolite in Hall-Heroult cell is maintained between __________ percent. (A) 2-5 (B) 18-20 (C) 12-15 (D) 6-12

Description : The Al2O3 content of cryolite in Hall-Heroult cell is maintained between __________ percent. (A) 2-5 (B) 18-20 (C) 12-15 (D) 6-12

Last Answer : (A) 2-5

How many of the given metals can be obtained by carbon reduction in their extractive metallurgy

Description : How many of the given metals can be obtained by carbon reduction in their extractive metallurgy

Last Answer : How many of the given metals can be obtained by carbon reduction in their extractive metallurgy

Which of the following process is used in the extractive metallurgy of magnesium ?

Description : Which of the following process is used in the extractive metallurgy of magnesium ?

Last Answer : Which of the following process is used in the extractive metallurgy of magnesium ? A. ... C. Aqqueos solution electrolysis D. Therminte reducation

Which of the following process is used in the extractive metallurgy of magnesium ?

Description : Which of the following process is used in the extractive metallurgy of magnesium ?

Last Answer : Which of the following process is used in the extractive metallurgy of magnesium ? A. ... C. Aqueous solution electrolysis D. Thermite reduction

Approximately how many businesses content marketing is used? A. 20% to 30% B. 40% to 50% C. 60% to 70% D. 80% to 90%

Description : Approximately how many businesses content marketing is used? A. 20% to 30% B. 40% to 50% C. 60% to 70% D. 80% to 90%

Last Answer : D. 80% to 90%

Approximately about________ of cooling in cooling tower is through The sensible cooling A 5% B 80% C 20% D 40%

Description : Approximately about________ of cooling in cooling tower is through The sensible cooling A 5% B 80% C 20% D 40%

Last Answer : C 20%

Pick out the wrong statement. (A) The X-rays cannot be deflected by electric field unlike cathode rays (B) The intensity of X-rays can be measured by ionisation current produced due to the ionisation of gas by X-rays (C) The quality of X-rays can be controlled by varying the anode-cathode voltage (D) Crystal structure of a material can be studied by an electron microscope

Description : Pick out the wrong statement. (A) The X-rays cannot be deflected by electric field unlike cathode rays (B) The intensity of X-rays can be measured by ionisation current produced due to the ... the anode-cathode voltage (D) Crystal structure of a material can be studied by an electron microscope

Last Answer : (C) The quality of X-rays can be controlled by varying the anode-cathode voltage

Pick out the wrong statement about coating/electroplating of metals. (A) Phosphate coating is used as an excellent base for paints & enamels (B) Phosphate coating is less corrosion resistant than chromate coating (C) The base metal to be electroplated is normally made the cathode of the electrolytic cell and coating metal is made the anode (D) Calorising is the process of coating steel with chromium

Description : Pick out the wrong statement about coating/electroplating of metals. (A) Phosphate coating is used as an excellent base for paints & enamels (B) Phosphate coating is less corrosion resistant than ... coating metal is made the anode (D) Calorising is the process of coating steel with chromium

Last Answer : (D) Calorising is the process of coating steel with chromium

Which of the following is not used as a medium for high temperature heating ? (A) Dowtherm (B) Mercury (C) Liquid metal (e.g. molten sodium) (D) Fused salts (e.g., an eutectic mixture of 53% KNO3 , 40% NaNO2and 7% NaNO3 )

Description : Which of the following is not used as a medium for high temperature heating ? (A) Dowtherm (B) Mercury (C) Liquid metal (e.g. molten sodium) (D) Fused salts (e.g., an eutectic mixture of 53% KNO3 , 40% NaNO2and 7% NaNO3 )

Last Answer : (B) Mercury

What substance is produced at the cathode in the electrolysis of molten sodium chloride?

Description : What substance is produced at the cathode in the electrolysis of molten sodium chloride?

Last Answer : ANSWER: SODIUM

Which of the following statements comparing transistors and vacuum tubes is correct? A. Both transistors and vacuum tubes have a cathode that must be heated to give off electrons. B. A vacuum tube must have a heated cathode, where transistors do not. C. Neither transistors nor vacuum tubes require heat for electrons to flow. D. The anode of both transistors and vacuum tubes must be heated to give off electrons.

Description : Which of the following statements comparing transistors and vacuum tubes is correct? A. Both transistors and vacuum tubes have a cathode that must be heated to give off electrons. B. A vacuum tube must ... flow. D. The anode of both transistors and vacuum tubes must be heated to give off electrons.

Last Answer : Answer: B

Name the process used to obtain Aluminum by electrolysis of aluminum oxide dissolved in molten cryolite?

Description : Name the process used to obtain Aluminum by electrolysis of aluminum oxide dissolved in molten cryolite?

Last Answer : ANSWER: HALL PROCESS

Pick out the correct statement. (A) Plastics are good conductors of heat and electricity (B) All the polymers are highly crystalline in nature (C) Polymers can be vaporised by heating to a very high temperature (D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Description : Pick out the correct statement. (A) Plastics are good conductors of heat and electricity (B) All the polymers are highly crystalline in nature (C) Polymers can be vaporised by heating to ... D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Last Answer : (D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

One mole feed of a binary mixture of a given composition is flash vaporised at a fixed P and T. If Raoult's law is obeyed, then changing the feed composition would effect (A) The product composition but not the fraction vaporised (B) The product composition as well as the fraction vaporised (C) The fraction vaporised but not the product composition (D) Neither the product composition nor the fraction vaporised

Description : One mole feed of a binary mixture of a given composition is flash vaporised at a fixed P and T. If Raoult's law is obeyed, then changing the feed composition would effect (A) ... The fraction vaporised but not the product composition (D) Neither the product composition nor the fraction vaporised

Last Answer : (C) The fraction vaporised but not the product composition

Caustic soda is produced in a mercury cell having anode and cathode made respectively of moving mercury and (A) Moving mercury and graphite (B) Graphite and moving mercury (C) Moving mercury and carbon (D) Moving mercury and crimped steel wire

Description : Caustic soda is produced in a mercury cell having anode and cathode made respectively of moving mercury and (A) Moving mercury and graphite (B) Graphite and moving mercury (C) Moving mercury and carbon (D) Moving mercury and crimped steel wire

Last Answer : (B) Graphite and moving mercury

What products do we get on electrolysis of saturated brine using steel cathode and graphite anode in an electrolytic cell? (A) Cl2 & Na (B) Cl2 & H2 (C) O2 & H2 (D) Cl2 , H2 & NaOH solution

Description : What products do we get on electrolysis of saturated brine using steel cathode and graphite anode in an electrolytic cell? (A) Cl2 & Na (B) Cl2 & H2 (C) O2 & H2 (D) Cl2 , H2 & NaOH solution

Last Answer : (D) Cl2 , H2 & NaOH solution

The major role of fluorpar (`CaF_2` ) which added in small quantities in the electrolyte reduction of alumina dissolved in fused cryolite `(N_(3)AlF_(

Description : The major role of fluorpar (`CaF_2` ) which added in small quantities in the electrolyte reduction of alumina dissolved in fused cryolite `(N_(3)AlF_(

Last Answer : The major role of fluorpar (`CaF_2` ) which added in small quantities in the electrolyte reduction ... the rate of oxidation of carbon at the anode

Statement -1 In the electltic reduction of `Al_(2)O_(3)`cryolite is used . Statement -2: Cryolite si an ore of aluminium

Description : Statement -1 In the electltic reduction of `Al_(2)O_(3)`cryolite is used . Statement -2: Cryolite si an ore of aluminium

Last Answer : Statement -1 In the electltic reduction of `Al_(2)O_(3)`cryolite is used . Statement -2: Cryolite si an ore of aluminium

Molten sodium (as a coolant in fast breeder reactor) (A) Can’t attain high temperature at normal pressure (B) Is not at all corrosive, even at a higher temperature (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water (D) None of these

Description : Molten sodium (as a coolant in fast breeder reactor) (A) Can’t attain high temperature at normal pressure (B) Is not at all corrosive, even at a higher temperature (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water (D) None of these

Last Answer : (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water

Corrosion of a metal occurs at the (a) Anode (b) Cathode (c) Both anode and cathode (d) None of the above

Description : Corrosion of a metal occurs at the (a) Anode (b) Cathode (c) Both anode and cathode (d) None of the above

Last Answer : Ans:(a)

(3) made cathode and a pure nickel red, the anode Explanation: Electroplating is the deposition by electrolysis of a coating of metal upon a conducting surface. The simplest system makes the object to be plated the negative electrode (cathode) or plate in a galvanic couple. Thus a spoon or other object may be connected by a wire to a plate of nickel. The process that occurs on the spoon is called reduction and, therefore, the spoon is also referred to as a cathode.

Description : (3) made cathode and a pure nickel red, the anode Explanation: Electroplating is the deposition by electrolysis of a coating of metal upon a conducting surface. The simplest system makes the object to be ... on the spoon is called reduction and, therefore, the spoon is also referred to as a cathode.

Last Answer : Which of the following is not a method of preparing oxygen? (1) Electrolysis of water (2) Fractional distillation of liquid air (3) Decomposition of potassium permanganate (4) Decomposition of manganese dioxide

Electrolysis of an aqueous solution of copper sulphate using copper electrodes gives (1) Copper at eathode and oxygen at anode. (2) Copper at anode and oxygen at cathode. (3) Copper at cathode and anodes dissolve to give copper. (4) Hydrogen at cathode and oxygen at anode.

Description : Electrolysis of an aqueous solution of copper sulphate using copper electrodes gives (1) Copper at eathode and oxygen at anode. (2) Copper at anode and oxygen at cathode. (3) Copper at cathode and anodes dissolve to give copper. (4) Hydrogen at cathode and oxygen at anode.

Last Answer : (1) Copper at eathode and oxygen at anode. Explanation: Copper is deposited at the cathode and is dissolved at the anode. Consequently the concentration of copper ions in solution remains constant. This can be used as a method of purification of copper as only pure copper is deposited at the cathode

The device in figure 'B' shown in the illustration will conduct when the ____________. EL-0067 A. base-emitter is forward biased and the collector-base is reverse biased B. anode-cathode is forward biased and the cathode-gate is forward biased C. source-gate is forward biased and the gate-drain is reversed biased D. terminal 1-2 is forward biased and the emitter-terminal 1 is reverse biased

Description : The device in figure 'B' shown in the illustration will conduct when the ____________. EL-0067 A. base-emitter is forward biased and the collector-base is reverse biased B. anode-cathode is forward ... is reversed biased D. terminal 1-2 is forward biased and the emitter-terminal 1 is reverse biased

Last Answer : Answer: B

The leads of the device in figure 'B' shown in the illustration are named _________. EL-0065 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Description : The leads of the device in figure 'B' shown in the illustration are named _________. EL-0065 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Last Answer : Answer: A

Leads on the device in figure 'B' shown in the illustration are named ____________. EL-0067 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Description : Leads on the device in figure 'B' shown in the illustration are named ____________. EL-0067 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Last Answer : Answer: D

The leads of the device in figure 'A' shown in the illustration are named the _______________. EL-0065 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Description : The leads of the device in figure 'A' shown in the illustration are named the _______________. EL-0065 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Last Answer : Answer: C

The input signal of a travelling wave tube is introduced at A. Cathode B. Anode C. Cathode end of the helix D. Collector end of the helix

Description : The input signal of a travelling wave tube is introduced at A. Cathode B. Anode C. Cathode end of the helix D. Collector end of the helix

Last Answer : C. Cathode end of the helix

A squid axon is placed on stimulating electrodes, and an intracellular electrode is inserted and connected through a cathode-ray oscilloscope (CRO) to an indifferent electrode. When the axon is stimulated, the latent period is 1.5 ms. The intracellular electrode is 6 cm form the anode of the simulator and 4.5 cm from the cathode of the simulator. What is the conduction velocity of the axon. a. 15 m/s b. 30 m/s c. 40 m/s d. 67.5 m/s e. This cannot be determined from the information given

Description : A squid axon is placed on stimulating electrodes, and an intracellular electrode is inserted and connected through a cathode-ray oscilloscope (CRO) to an indifferent electrode. When the axon is stimulated, the latent ... . 40 m/s d. 67.5 m/s e. This cannot be determined from the information given

Last Answer : 30 m/s

In the common dry cell, the zinc atoms are: w) reduced at the cathode x) oxidized at the cathode y) oxidized at the anode z) reduced at the anode

Description : In the common dry cell, the zinc atoms are: w) reduced at the cathode x) oxidized at the cathode y) oxidized at the anode z) reduced at the anode

Last Answer : ANSWER: Y -- OXIDIZED AT THE ANODE

When a spoon is to be electroplated with nickel the spoon is (1) dipped in a nickel sulphate solution (2) made anode and a pure nickel rod, the cathode (3) made cathode and a pure nickel red, the anode (4) coated with nickel sulphate and dried

Description : When a spoon is to be electroplated with nickel the spoon is (1) dipped in a nickel sulphate solution (2) made anode and a pure nickel rod, the cathode (3) made cathode and a pure nickel red, the anode (4) coated with nickel sulphate and dried

Last Answer : made cathode and a pure nickel red, the anode

Electrolysis of an aqueous solution of copper sulphate using copper electrodes gives (1) Copper at cathode and oxygen at anode. (2) Copper at anode and oxygen at cathode. (3) Copper at cathode and anodes dissolve to give copper. (4) Hydrogen at cathode and oxygen at anode.

Description : Electrolysis of an aqueous solution of copper sulphate using copper electrodes gives (1) Copper at cathode and oxygen at anode. (2) Copper at anode and oxygen at cathode. (3) Copper at cathode and anodes dissolve to give copper. (4) Hydrogen at cathode and oxygen at anode.

Last Answer : Copper at cathode and oxygen at anode.

Define cathode and anode.

Description : Define cathode and anode.

Last Answer : Cathode: The electrode which is connected to the negative terminal (pole) of a battery is called as cathode. It is a negative electrode.  Anode: The electrode which is connected to the positive terminal (pole) of a battery is called as anode. It is a positive electrode.