Description : The function of adding cryolite in the electrolytic reduction of alumina by Hall-Heroult process is to
Last Answer : The function of adding cryolite in the electrolytic reduction of alumina by Hall-Heroult ... D. increase the electrical canductivity of alumina
Description : Identify the correct statement with reference to the extractive metallurgy of aluminium. (A) The electrolyte consists of molten Na3AlF6 with approximately 1 to 8% Al2O3 (B) Approximately 80% of ... is immediately vaporised (D) Anode effect sets in when the cryolite concentration goes below 40%.
Last Answer : (A) The electrolyte consists of molten Na3AlF6 with approximately 1 to 8% Al2O3
Description : Electrolytic reduction of alumina to aluminum by the Hall-Heroult process is carried out
Last Answer : Electrolytic reduction of alumina to aluminum by the Hall-Heroult process is carried out A. In ... which forms a melt with higher melting temparature.
Description : Which of the following prtoducts is not formed at the anode in the hall -Heroult electrolysis process?
Last Answer : Which of the following prtoducts is not formed at the anode in the hall -Heroult electrolysis process? A. `CO_(2)` B. `O_(2)` C. `Cl_(2)` D. `F_(2)`
Description : In the extraction of aluminium by Hall-Heroult process purified `Al_(2)O_(3)` is mixed with `CaF_(2)` to
Last Answer : In the extraction of aluminium by Hall-Heroult process purified `Al_(2)O_(3)` is mixed with `CaF_(2)` to A ... ^(3+)` into Al(s)` D. acts as catalyst
Description : Hall- Heroult process is related to?
Last Answer : Aluminum (Al)
Description : Ash content in the coke produced from a coking coal having 20% ash may be around __________ percent. (A) 6 (B) 12 (C) 18 (D) 24
Last Answer : (D) 24
Description : Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70
Last Answer : (B) 25-30
Description : Sugar content in sugarcane on cane basis is about __________ percent by weight. (A) 1 to 5 (B) 5 to 10 (C) 15 to 20 (D) 20 to 30
Last Answer : (B) 5 to 10
Description : The optimum moisture content in solids to be crushed/ground ranges from __________ percent. (A) 3 to 4 (B) 8 to 10 (C) 10 to 15 (D) 15 to 20
Last Answer : (A) 3 to 4
Description : P2O5 content in triple superphosphate is about __________ percent. (A) 42-50 (B) 15-20 (C) 85-90 (D) 70-75
Last Answer : (A) 42-50
Description : P2O5 content in superphosphate is about __________ percent. (A) 30-35 (B) 15-20 (C) 65-70 (D) 85-90
Last Answer : (B) 15-20
Description : . Sucrose content in the raw juice extracted from sugar cane is about __________ percent (B) 15 - 20 (A) 1 - 2285 (C) 50 - 60 (D) 80 - 85
Last Answer : (B) 15 - 20
Description : High speed cutting tool steels contain about __________ percent of tungsten. (A) 6-8 (B) 18-20 (C) 30-35 (D) 50-55
Last Answer : (B) 18-20
Description : An upper limit of oil content is limited to about __________ percent for achieving efficient and satisfactory level of wax sweating. (A) 5 (B) 15 (C) 40 (D) 60
Last Answer : (C) 40
Description : Pressure maintained in the high pressure primary tower of a three stage crude oil distillation system is about __________ kg/cm2 . (A) 1.5 (B) 3 (C) 6 (D) 12
Last Answer : (B) 3
Description : Though increased pressure has a retarding effect on cracking reaction, yet in actual process, a positive pressure of 10-15 kgf/cm2 is maintained during cracking mainly to (A) Increase the yield of ... coke formation (C) Enhance the octane number of gasoline (D) Reduce gum content in gasoline
Last Answer : (B) Suppress coke formation
Description : Catalyst used in ammonia synthesis uses __________ as a promoter. (A) Pt (B) K2O (C) Al2O3 (D) Ni
Last Answer : (B) K2O
Description : Consider the production of ammonia from methene and air as raw materials. The catalysts used are: (i) __________ for steam reforming of methane and (ii) __________ for ammonia synthesis. (A) (i) - Ni/Al2O3 ; (ii) - Cu - ZnO/ ... (i) - Ni/Al2O3 ; (ii) - Fe/Al2O3 (D) (i) - Fe/Al2O3 ; (ii) - Ni/Al2O3
Last Answer : (C) (i) - Ni/Al2O3 ; (ii) - Fe/Al2O3
Description : Manufacture of phthalic anhydride uses __________ as a catalyst. (A) Ni (B) Cr (C) V2O5 (D) Al2O3
Last Answer : (C) V2O5
Description : More than 95% of __________ is present in corundum. (A) SiO2 (B) Al2O3 (C) CaSiO2 (D) MgO
Last Answer : B) Al2O3
Description : Limestone addition in the blast furnace is done to flux __________ present in the raw materials. (A) SiO2 (B) Al2O3 (C) MnO2 (D) P
Last Answer : Limestone addition in the blast furnace is done to flux __________ present in the raw materials. (A) SiO2 (B) Al2O3 (C) MnO2 (D) P
Description : Carbon content in plain carbon steel is __________ percent. (A) 0.1 to 0.15 (B) 0.35 to 0.45 (C) 0.65 to 0.80 (D) 0.85 to 1.2
Last Answer : (B) 0.35 to 0.45
Description : Volatile matter content of metallurgical coke may be around __________ percent. (A) 1-2 (B) 10-15 (C) 22-26 (D) 30-33
Last Answer : (A) 1-2
Description : Ash content in the middling coal (a byproduct of coal washeries) in India ranges between __________ percent. (A) 15 to 25 (B) 35 to 45 (C) 55 to 75 (D) 75
Last Answer : (B) 35 to 45
Description : Average sulphur content in Indian pyrites is about __________ percent. (A) 15 (B) 35 (C) 55 (D) 70
Last Answer : (B) 35
Description : 150. Nitrogen content in ammonium sulphate (a fertiliser) is around __________ percent. (A) 5 (B) 20 (C) 50 (D) 65
Last Answer : (B) 20
Description : Condensation polymerisation of caprolactam is carried out in the reactor maintained at a temperature of __________ °C for producing nylon- 6. (A) -20 to 25 (B) 50 to 75 (C) 100 to 150 (D) 250-280
Last Answer : (D) 250-280
Description : Liability in respect of postal articles insured hall be liable to pay compensation, not exceeding the amount for which a postal article has been insured, to the sender thereof for the loss of the postal article or ... by post explained in a) Section 18 b) Section 33 c) Section 20 d) None of these
Last Answer : b) Section 33
Description : Cellulose content in bamboo fibre is about __________ percent. (A) 10 (B) 20 (C) 50 (D) 85
Last Answer : (C) 50
Description : Oxygen content in a flue gas was found to be 4%. It implies that excess air used for combustion was around __________ percent. (A) 4 (B) 96 (C) 20 (D) 40
Last Answer : (C) 20
Description : Alcohol content in freshly prepared natural and fortified wine may be respectively around __________ percent. (A) 7-14 and 14-30 (B) 7-14 and 40-50 (C) 14 - 30 and 40-50 (D) 10 - 20 and 40 - 50
Last Answer : (A) 7-14 and 14-30
Description : Iron content in Indian iron ore is about __________ percent. (A) 80-85 (B) 60-65 (C) 40-45 (D) 20-25
Last Answer : (B) 60-65
Description : In the illustration, the signal from the device connected to terminals 18 and 19 is __________. EL-0046 A. prime mover speed feedback B. loss of control alarm when comparing with the input signal ... slip between the prime mover and the alternator D. to shut down the prime mover if overspeeding
Last Answer : Answer: A
Description : Ishath bought 15 pieces of [email protected],500/- each and sold all of them at the total price of Rs.81, 000/-. What is the percent profit earned in the deal? a) 18.66 b) 20 c) 25 d) 36 e) None of these
Last Answer : Total cost of 15 pieces of Mobiles= 15×4500 = Rs. 67500 Total Sales prices of 15 pieces of Mobiles= Rs. 81000 Profit% = 81000 – 67500 / 67500 × 100 = 13500/67500 × 100 = 20% Answer: b)
Description : Naphtha yield in straight run distillation of crude oil may be about__________ percent. (A) 2 (B) 6 (C) 12 (D) 18
Last Answer : (B) 6
Description : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles
Last Answer : 22
Description : 2. Arrange the following fractions in ascending order:(i) \( \frac{3}{8}, \frac{5}{6}, \frac{6}{8}, \frac{2}{4}, \frac{1}{3} \)(ii) \( \frac{4}{6}, \frac{3}{8}, \frac{6}{12}, \frac{5}{16} \)3. Arrange the ... ( \frac{23}{3} \) and 6(iii) \( \frac{18}{20} \) and \( \frac{21}{25} \)(iv) \( 3 \frac{3
Last Answer : 2. Arrange the following fractions in ascending order: (i) \( \frac{3}{8}, \frac{5}{6}, \frac{6}{8}, \frac ... frac{3}{10} \) and \( 2 \frac{7}{15} \)
Description : The yield of straight run LPG from crude oil is about __________ weight percent. (A) 20-25 (B) 1-1.5 (C) 10-15 (D) 0.1-0.2
Last Answer : (B) 1-1.5
Description : pH value of soil is maintained at __________ by the addition of fertiliser for optimum growth and health of the plant. (A) 4-5 (B) 7-8 (C) 9-10 (D) 12-13
Last Answer : (B) 7-8
Description : Find the range of the given data : 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11, 20 -Maths 9th
Last Answer : Here, the minimum and maximum values of given data are 6 and 32 respectively. Range = 32 – 6 = 26
Description : The range of the data 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11 and 20 is -Maths 9th
Last Answer : In conclusion, the range of data 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11, and 20 is 26.
Last Answer : (d) In a given data, maximum value = 32 and minimum value = 6 We know, range of the data = maximum value – minimum value = 32 – 6 = 26 Hence, the range of the given data is 26.
Description : In India, which one of the following should be considered the right combination of the age in days and live body weight in kg for a lamb for its weaning ? (A) 20 days to 30 days and 6 kg to 7 kg (B) 45 days to 60 ... (D) 75 days to 90 days and 12 kg to 15 kg (E) 55 days to 70 days and 9 kg to 11 kg
Last Answer : (C) 105 days to 120 days and 18 kg to 21 kg
Description : Exothermic condensation reaction of monochlorobenzene with chloral in presence of 20% oleum as catalyst produces DDT. The reaction temperature is maintained at __________ °C. (A) 15-30 (B) 90-100 (C) 250-300 (D) < 0
Last Answer : (A) 15-30
Description : Tar yield in the low temperature and high temperature carbonisation of dry coal may be respectively __________ percent. (A) 3 & 10 (B) 10 & 3 (C) 10 & 20 (D) 15 & 8
Last Answer : (B) 10 & 3
Description : Carbon content in steel is __________ percent. (A) 0.1-2 (B) 4-6 (C) 2-4 (D) 0.001-0.01
Last Answer : (A) 0.1-2
Description : The minimum carbon content in steel should be __________ percent for it to respond to a hardening treatment. (A) 0.2 (B) 0.4 (C) 0.6 (D) 0.8
Last Answer : Option A
Description : The moisture content in a well seasoned timber is (A) 4 % to 6 % (B) 10 % to 12 % (C) 15 % to 20 % (D) 100 %
Last Answer : Answer: Option B