Refrigerants commonly used for domestic refrigerators are (A) Ethyl chloride or methyl chloride (B) Freon-12 (C) Propane (D) NH3 or CO2

Refrigerants commonly used for domestic refrigerators are (A) Ethyl chloride or methyl chloride
(B) Freon-12
(C) Propane
(D) NH3 or CO2
by

1 Answer

Answer :

(A) Ethyl chloride or methyl chloride
by

Related questions

Which of the following refrigerants has lowest freezing point (a) Freon-12 (b) NH3 (c) CO2 (d) Freon-22

Description : Which of the following refrigerants has lowest freezing point (a) Freon-12 (b) NH3 (c) CO2 (d) Freon-22

Last Answer : Ans: d

Which substance is commonly used in refrigerators? (a) Freon (b) Oxygen (c) Ammonia (d) Sulphur dioxide

Description : Which substance is commonly used in refrigerators? (a) Freon (b) Oxygen (c) Ammonia (d) Sulphur dioxide

Last Answer : Ans:(a)

The commonly used coolant in refrigerators is – (1) Ammonia (2) Nitrogen (3) Freon (4) Oxygen

Description : The commonly used coolant in refrigerators is – (1) Ammonia (2) Nitrogen (3) Freon (4) Oxygen

Last Answer : (3) Freon Explanation: Modem refrigerators usually use a refrigerant called FIFC-134a (1,1,1,2- Tetrafluoroethane), which does not deplete the ozone layer, instead of Freon. Freon used to be the most common refrigerant till the 1980s; however, its use has declined since

The commonly used coolant in refrigerators is (1) Ammonia (2) Nitrogen (3) Freon (4) Oxygen

Description : The commonly used coolant in refrigerators is (1) Ammonia (2) Nitrogen (3) Freon (4) Oxygen

Last Answer : Freon

Ethyl alcohol is commonly made unfit for drinking by the addition of (a) potassium cyanide (b) methyl alcohol (c) chloroform (d) potassium chloride

Description : Ethyl alcohol is commonly made unfit for drinking by the addition of (a) potassium cyanide (b) methyl alcohol (c) chloroform (d) potassium chloride

Last Answer : Ans:(b)

Which of the following is a widely used refrigerant in vapour compression refrigeration system (using large centrifugal compressor)? (A) Freon (B) Liquid sulphur dioxide (C) Methyl chloride (D) Ammonia

Description : Which of the following is a widely used refrigerant in vapour compression refrigeration system (using large centrifugal compressor)? (A) Freon (B) Liquid sulphur dioxide (C) Methyl chloride (D) Ammonia

Last Answer : (A) Freon

Which of the following is used as a solvent in deasphalting of petroleum products? (A) Furfural (B) Propane (C) Methyl ethyl ketone (D) Liquid sulphur dioxide

Description : Which of the following is used as a solvent in deasphalting of petroleum products? (A) Furfural (B) Propane (C) Methyl ethyl ketone (D) Liquid sulphur dioxide

Last Answer : (B) Propane

Solvent used in the Udex (glycol) extraction process for removal of light aromatics from cracked naphtha is (A) Propane (B) Diethylene glycol (C) Aqueous solution (10% water) of diethylene glycol (D) Methyl ethyl ketone (MEK)

Description : Solvent used in the Udex (glycol) extraction process for removal of light aromatics from cracked naphtha is (A) Propane (B) Diethylene glycol (C) Aqueous solution (10% water) of diethylene glycol (D) Methyl ethyl ketone (MEK)

Last Answer : (C) Aqueous solution (10% water) of diethylene glycol

Solvent used in duo-sol extraction for lube oil upgradation is a mixture of (A) Propane & phenol-cresol mixture(B) Methyl ethyl ketone & glycol(C) Phenol & furfural(D) Propane & liquid sulphur dioxide

Description : Solvent used in duo-sol extraction for lube oil upgradation is a mixture of (A) Propane & phenol-cresol mixture (B) Methyl ethyl ketone & glycol (C) Phenol & furfural (D) Propane & liquid sulphur dioxide

Last Answer : (A) Propane & phenol-cresol mixture

The most suitable solvent for deasphalting vacuum residue is (A) Propane (B) Methyl ethyl ketone (C) Doctor's solution (D) Methanol amine

Description : The most suitable solvent for deasphalting vacuum residue is (A) Propane (B) Methyl ethyl ketone (C) Doctor's solution (D) Methanol amine

Last Answer : (B) Methyl ethyl ketone

Solvent used for dewaxing of petroleum products are (A) Furfural (B) Methyl ethyl ketone (MEK) (C) Propane (D) Both (B) & (C

Description : Solvent used for dewaxing of petroleum products are (A) Furfural (B) Methyl ethyl ketone (MEK) (C) Propane (D) Both (B) & (C

Last Answer : (C) Propane

The freon group of refrigerants are (a) halo-carbon refrigerants (b) azeotrope refrigerants (c) inorganic refrigerants (d) hydro-carbon refrigerants

Description : The freon group of refrigerants are (a) halo-carbon refrigerants (b) azeotrope refrigerants (c) inorganic refrigerants (d) hydro-carbon refrigerants

Last Answer : Ans: a

Freon group of refrigerants are (a) inflammable (d) toxic (c) non-toxic and non-inflammable (d) non-toxic and inflammable

Description : Freon group of refrigerants are (a) inflammable (d) toxic (c) non-toxic and non-inflammable (d) non-toxic and inflammable

Last Answer : Ans: c

‘Freon' used as refrigerants is chemically known as - (1) chlorinated hydrocarbon (2) fluorinated hydrocarbon (3) chlorofluoro hydrocarbon (4) fluorinated aromatic compound

Description : ‘Freon' used as refrigerants is chemically known as - (1) chlorinated hydrocarbon (2) fluorinated hydrocarbon (3) chlorofluoro hydrocarbon (4) fluorinated aromatic compound

Last Answer : (3) chlorofluoro hydrocarbon Explanation: In addition to fluorine and carbon, Freons often contain hydrogen, chlorine, or bromine. Thus, Freons are types of chlorofluorocarbons (CFCs), hydrochlorofluorocarbons (HCFCs), and related compounds.

‘Freon' used as refrigerants is chemically known as - (1) chlorinated hydrocarbon (2) fluorinated hydrocarbon (3) chlorofluoro hydrocarbon (4) fluorinated aromatic compound

Description : ‘Freon' used as refrigerants is chemically known as - (1) chlorinated hydrocarbon (2) fluorinated hydrocarbon (3) chlorofluoro hydrocarbon (4) fluorinated aromatic compound

Last Answer : (3) chlorofluoro hydrocarbon Explanation: In addition to fluorine and carbon, Freons often contain hydrogen, chlorine, or bromine. Thus, Freons are types of chlorofluorocarbons (CFCs), hydrochlorofluorocarbons (HCFCs), and related compounds.

Freon group of refrigerants are n. a) Inflammable. c) Non-inflammable and toxic o. b) Toxic. d) Nontoxic and non-inflammable

Description : Freon group of refrigerants are n. a) Inflammable. c) Non-inflammable and toxic o. b) Toxic. d) Nontoxic and non-inflammable

Last Answer : Nontoxic and non-inflammable

Mass flow ratio of NH3 in comparison to Freon-12 for same refrigeration load and same temperature limits is of the orderof (a) 1 : 1 (b) 1 : 9 (c) 9 : 1 (d) 1 : 3

Description : Mass flow ratio of NH3 in comparison to Freon-12 for same refrigeration load and same temperature limits is of the orderof (a) 1 : 1 (b) 1 : 9 (c) 9 : 1 (d) 1 : 3

Last Answer : Ans: b

In jet refrigerators, the refrigerating fluid is practically always (A) Water (B) Ammonia (C) Freon (D) Brine

Description : In jet refrigerators, the refrigerating fluid is practically always (A) Water (B) Ammonia (C) Freon (D) Brine

Last Answer : (A) Water

Grignard reagent is chemically known as (A) Ethyl magnesium chloride (B) Methyl magnesium chloride (C) Dichlorophenol (D) Monochloroacetic acid

Description : Grignard reagent is chemically known as (A) Ethyl magnesium chloride (B) Methyl magnesium chloride (C) Dichlorophenol (D) Monochloroacetic acid

Last Answer : (A) Ethyl magnesium chloride

Solvent deoiling process is used for separating oil and soft wax from hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two commonly used deoiling solvents. Use of former as the deoiling solvent has the advantages of the (A) Elimination of solvent drying facility (B) Higher nitration temperature (C) Lower solvent dilution ratio (D) All (A), (B) & (C)

Description : Solvent deoiling process is used for separating oil and soft wax from hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two commonly used deoiling solvents. Use of former as the deoiling solvent ... nitration temperature (C) Lower solvent dilution ratio (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

The commonly used solvent in supercritical extraction is (A) Methyl ethyl ketone (B) Water (C) Carbon tetrachloride (D) Carbon dioxide

Description : The commonly used solvent in supercritical extraction is (A) Methyl ethyl ketone (B) Water (C) Carbon tetrachloride (D) Carbon dioxide

Last Answer : (D) Carbon dioxide

Benzoyl chloride on basic-hydrolysis (NaOH/H2O) gives : (a) Benzoic acid (b) Methyl benzoate (c) Sodium benzoate (d) Ethyl benzoate

Description : Benzoyl chloride on basic-hydrolysis (NaOH/H2O) gives : (a) Benzoic acid (b) Methyl benzoate (c) Sodium benzoate (d) Ethyl benzoate

Last Answer : Sodium benzoate

Which compound reacts most rapidly by an SN1 mechanism? (a) Methyl chloride(b) Isopropyl chloride(c) Ethyl chloride(d) tert-Butyl chloride

Description : Which compound reacts most rapidly by an SN1 mechanism? (a) Methyl chloride (b) Isopropyl chloride (c) Ethyl chloride (d) tert-Butyl chloride

Last Answer : tert-Butyl chloride

The bank of tubes located at the back of the domestic refrigerators are the __________ tubes. (A) Refrigerant cooling (B) Evaporator (C) Condenser (D) Throttling

Description : The bank of tubes located at the back of the domestic refrigerators are the __________ tubes. (A) Refrigerant cooling (B) Evaporator (C) Condenser (D) Throttling

Last Answer : C) Condenser

The most commonly used chemicals in the artificial rainmaking or cloud seeding are (1) Silver Iodide (AgI) (2) Sodium Chloride (NaCl) (3) Dry Ice (Frozen CO2) (4) All of the above

Description : The most commonly used chemicals in the artificial rainmaking or cloud seeding are (1) Silver Iodide (AgI) (2) Sodium Chloride (NaCl) (3) Dry Ice (Frozen CO2) (4) All of the above

Last Answer : (1) Silver Iodide (AgI) Explanation: Cloud seeding, a form of intentional weather modification, is the attempt to change the amount or type of precipitation that falls from clouds, by dispersing ... common chemicals used for cloud seeding include silver iodide and dry ice (solid carbon dioxide).

The most commonly used chemicals in the artificial rainmaking or cloud seeding are (1) Silver Iodide (Ag I) (2) Sodium Chloride (NaCl) (3) Dry Ice (Frozen CO2 ) (4) All of the above

Description : The most commonly used chemicals in the artificial rainmaking or cloud seeding are (1) Silver Iodide (Ag I) (2) Sodium Chloride (NaCl) (3) Dry Ice (Frozen CO2 ) (4) All of the above

Last Answer : Silver Iodide (Ag I) 

The common refrigerant in domestic refrigerator is - (1) Neon (2) Oxygen (3) Nitrogen (4) Freon

Description : The common refrigerant in domestic refrigerator is - (1) Neon (2) Oxygen (3) Nitrogen (4) Freon

Last Answer : (4) Freon Explanation: Common refrigerants used in domestic refrigerators are freon, neon and nitrogen. It flows through four components of refrigerator again and again. These four components are cooling chamber, compressor, heat exchanger and expander

The common refrigerant used in domestic Refrigerator is-------? A. Neon B. Spirit C. Freon/Ammonia (Answer) D. Methane

Description : The common refrigerant used in domestic Refrigerator is-------? A. Neon B. Spirit C. Freon/Ammonia (Answer) D. Methane

Last Answer : C. Freon/Ammonia (Answer)

The common refrigerant in domestic refrigerator is (1) Neon (2) Oxygen (3) Nitrogen (4) Freon

Description : The common refrigerant in domestic refrigerator is (1) Neon (2) Oxygen (3) Nitrogen (4) Freon

Last Answer : Freon

Refrigeration in aeroplanes usually employs the following refrigerant (a) Co2 (b) Freon-11 (c) Freon-22 (d) Air

Description : Refrigeration in aeroplanes usually employs the following refrigerant (a) Co2 (b) Freon-11 (c) Freon-22 (d) Air

Last Answer : Ans: d

Air refrigeration cycle is used in (a) domestic refrigerators (b) gas liquefaction (c)commercial refrigerators (d) Chillers

Description : Air refrigeration cycle is used in (a) domestic refrigerators (b) gas liquefaction (c)commercial refrigerators (d) Chillers

Last Answer : Ans: b

Most of the domestic refrigerators work on the following refrigeration system (a) vapour compression (b) vapour absorption (c) carnot cycle (d) electrolux refrigerator

Description : Most of the domestic refrigerators work on the following refrigeration system (a) vapour compression (b) vapour absorption (c) carnot cycle (d) electrolux refrigerator

Last Answer : Ans: a

Air refrigeration cycle is used in (a) domestic refrigerators (b) commercial refrigerators (c) air conditioning (d) gas liquefaction

Description : Air refrigeration cycle is used in (a) domestic refrigerators (b) commercial refrigerators (c) air conditioning (d) gas liquefaction

Last Answer : Ans: d

Consider the following statements 1. Large cold storage plants use ammonia as refrigerant while domestic refrigerators use chlorofluorocarbons. 2. Ammonia can be liquefied at ambient temperatures and at low pressures. 3. Chlorofluorocarbons are air pollutants. The correct statement(s) is/are: (a) 1 and 3 only (b) 2 and 3 only (c) 1, 2 and 3 (d) 3 only

Description : Consider the following statements 1. Large cold storage plants use ammonia as refrigerant while domestic refrigerators use chlorofluorocarbons. 2. Ammonia can be liquefied at ambient temperatures and at low pressures. 3. Chlorofluorocarbons are ... 3 only (b) 2 and 3 only (c) 1, 2 and 3 (d) 3 only

Last Answer : Ans:(a)

The monomer of natural rubber is (A) DMT (B) Isoprene (C) 2 methyl-1 propane (D) Both (B) and (C

Description : The monomer of natural rubber is (A) DMT (B) Isoprene (C) 2 methyl-1 propane (D) Both (B) and (C

Last Answer : (D) Both (B) and (C

Coke oven gas burns with a yellowish flame, because of the presence of (A) CO2 (B) CH4 (C) H2(D) NH3

Description : Coke oven gas burns with a yellowish flame, because of the presence of (A) CO2 (B) CH4 (C) H2 (D) NH3

Last Answer : (B) CH4

Raw materials for urea production are (A) CO2 and N2 (B) CO2 , H2 and N2 (C) NH3 and CO (D) HNO3 and CaCO3

Description : Raw materials for urea production are (A) CO2 and N2 (B) CO2 , H2 and N2 (C) NH3 and CO (D) HNO3 and CaCO3

Last Answer : (B) CO2 , H2 and N2

Formation of ammonium carbamate by reaction of NH3 with CO2 is a/an __________ reaction. (A) Catalytic (B) Exothermic (C) Endothermic (D) Reversible

Description : Formation of ammonium carbamate by reaction of NH3 with CO2 is a/an __________ reaction. (A) Catalytic (B) Exothermic (C) Endothermic (D) Reversible

Last Answer : (B) Exothermic

Pick out the correct statement. (A) Reaction of NH3 with HNO3 to produce (NH4 )2NO3 is endothermic (B) With increase in NH3 /CO2 ratio, urea yield decreases for a given temperature, pressure and total feed rate (C) Biuret (an intermediate during urea manufacture) is toxic to seeds and animals (D) Both (B) and (C)

Description : Pick out the correct statement. (A) Reaction of NH3 with HNO3 to produce (NH4 )2NO3 is endothermic (B) With increase in NH3 /CO2 ratio, urea yield decreases for a given temperature, pressure and total ... (an intermediate during urea manufacture) is toxic to seeds and animals (D) Both (B) and (C)

Last Answer : (B) With increase in NH3 /CO2 ratio, urea yield decreases for a given temperature, pressure and total feed rate

Raw materials required for the production of CAN (Calcium ammonium nitrate) is NH3 (A) HNO3 & limestone (B) CO2 & H2SO4 (C) HNO3 & NH4Cl (D) CO2 & KNO3

Description : Raw materials required for the production of CAN (Calcium ammonium nitrate) is NH3 (A) HNO3 & limestone (B) CO2 & H2SO4 (C) HNO3 & NH4Cl (D) CO2 & KNO3

Last Answer : (A) HNO3 & limestone

Urea is represented as (A) NH2 .CO.NH2 (B) NH3CO.CH3 (C) NH.CO2 .NH (D) NH3 .CO2 .NH3

Description : Urea is represented as (A) NH2 .CO.NH2 (B) NH3CO.CH3 (C) NH.CO2 .NH (D) NH3 .CO2 .NH3

Last Answer : (A) NH2 .CO.NH2

An increase in the NH3 /CO2 ratio in urea manufacture results in (A) Increased degree of conversion of CO2 to urea (B) Decreased degree of conversion of NH3 to urea (C) Decreased yield of urea (D) Decreased specific volume of molten mass

Description : An increase in the NH3 /CO2 ratio in urea manufacture results in (A) Increased degree of conversion of CO2 to urea (B) Decreased degree of conversion of NH3 to urea (C) Decreased yield of urea (D) Decreased specific volume of molten mass

Last Answer : (A) Increased degree of conversion of CO2 to urea

__________ catalyst is used in the production of urea from CO2 and NH3 . (A) Vanadium pentoxide (B) No (C) Alumina (D) Nicke

Description : __________ catalyst is used in the production of urea from CO2 and NH3 . (A) Vanadium pentoxide (B) No (C) Alumina (D) Nicke

Last Answer : (B) No

Automobile exhaust is passed through two compartments catalytic converter employing platinum as catalyst for (A) Conversion of CO into CO2 in the second compartment (B) Conversion of NOx into N2 and NH3 in the first compartment (C) Oxidation of unburnt hydrocarbon fuel in the second compartment (D) All (A), (B) and (C)

Description : Automobile exhaust is passed through two compartments catalytic converter employing platinum as catalyst for (A) Conversion of CO into CO2 in the second compartment (B) Conversion of NOx into N2 and NH3 in the first ... of unburnt hydrocarbon fuel in the second compartment (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

. Shift conversion reaction (A) Converts N2 and H2 into NH3 (B) Converts CO to CO2 with steam (C) Is non-catalytic (D) Is highly exothermic

Description : . Shift conversion reaction (A) Converts N2 and H2 into NH3 (B) Converts CO to CO2 with steam (C) Is non-catalytic (D) Is highly exothermic

Last Answer : (B) Converts CO to CO2 with steam

Impurities present in brine is normally removed by treatment with(A) NH3 and CO2(B) Lime and soda ash(C) Lime, ammonia and carbon(D) All (A), (B) and (C)

Description : Impurities present in brine is normally removed by treatment with (A) NH3 and CO2 (B) Lime and soda ash (C) Lime, ammonia and carbon (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Straight run petrol as compared to methyl/ethyl alcohol has (A) Lower calorific value (B) Lower octane number (C) Higher specific gravity (D) Higher ignition temperature

Description : Straight run petrol as compared to methyl/ethyl alcohol has (A) Lower calorific value (B) Lower octane number (C) Higher specific gravity (D) Higher ignition temperature

Last Answer : (B) Lower octane number

Most widely used solvent for dewaxing is (A) Methyl-ethyl-ketone (MEK) (B) Naphtha (C) Petroleum ether (D) Sodium plumbite

Description : Most widely used solvent for dewaxing is (A) Methyl-ethyl-ketone (MEK) (B) Naphtha (C) Petroleum ether (D) Sodium plumbite

Last Answer : (A) Methyl-ethyl-ketone (MEK)

The solvent used in Barisol dewaxing process is (A) Hexane (B) Furfural (C) Benzol and ethylene dichloride (D) Methyl ethyl ketone (MEK

Description : The solvent used in Barisol dewaxing process is (A) Hexane (B) Furfural (C) Benzol and ethylene dichloride (D) Methyl ethyl ketone (MEK

Last Answer : (C) Benzol and ethylene dichloride

Methyl tertiary butyl ether (MTBE), a high octane (octane no. = 115) gasoline blending component is produced by the simple additive reaction of isobutylene with (A) Methyl alcohol (B) Ethyl alcohol (C) Methane (D) Ethane

Description : Methyl tertiary butyl ether (MTBE), a high octane (octane no. = 115) gasoline blending component is produced by the simple additive reaction of isobutylene with (A) Methyl alcohol (B) Ethyl alcohol (C) Methane (D) Ethane

Last Answer : (A) Methyl alcohol