Solvent used in the Udex (glycol) extraction process for removal of light aromatics from cracked naphtha is (A) Propane (B) Diethylene glycol (C) Aqueous solution (10% water) of diethylene glycol (D) Methyl ethyl ketone (MEK)

Solvent used in the Udex (glycol) extraction process for removal of light
aromatics from cracked naphtha is
(A) Propane
(B) Diethylene glycol
(C) Aqueous solution (10% water) of diethylene glycol
(D) Methyl ethyl ketone (MEK)
by

1 Answer

Answer :

(C) Aqueous solution (10% water) of diethylene glycol
by

Related questions

Most widely used solvent for dewaxing is (A) Methyl-ethyl-ketone (MEK) (B) Naphtha (C) Petroleum ether (D) Sodium plumbite

Description : Most widely used solvent for dewaxing is (A) Methyl-ethyl-ketone (MEK) (B) Naphtha (C) Petroleum ether (D) Sodium plumbite

Last Answer : (A) Methyl-ethyl-ketone (MEK)

Solvent used in duo-sol extraction for lube oil upgradation is a mixture of (A) Propane & phenol-cresol mixture(B) Methyl ethyl ketone & glycol(C) Phenol & furfural(D) Propane & liquid sulphur dioxide

Description : Solvent used in duo-sol extraction for lube oil upgradation is a mixture of (A) Propane & phenol-cresol mixture (B) Methyl ethyl ketone & glycol (C) Phenol & furfural (D) Propane & liquid sulphur dioxide

Last Answer : (A) Propane & phenol-cresol mixture

Solvent used for dewaxing of petroleum products are (A) Furfural (B) Methyl ethyl ketone (MEK) (C) Propane (D) Both (B) & (C

Description : Solvent used for dewaxing of petroleum products are (A) Furfural (B) Methyl ethyl ketone (MEK) (C) Propane (D) Both (B) & (C

Last Answer : (C) Propane

Solvent deoiling process is used for separating oil and soft wax from hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two commonly used deoiling solvents. Use of former as the deoiling solvent has the advantages of the (A) Elimination of solvent drying facility (B) Higher nitration temperature (C) Lower solvent dilution ratio (D) All (A), (B) & (C)

Description : Solvent deoiling process is used for separating oil and soft wax from hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two commonly used deoiling solvents. Use of former as the deoiling solvent ... nitration temperature (C) Lower solvent dilution ratio (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

The solvent used in Barisol dewaxing process is (A) Hexane (B) Furfural (C) Benzol and ethylene dichloride (D) Methyl ethyl ketone (MEK

Description : The solvent used in Barisol dewaxing process is (A) Hexane (B) Furfural (C) Benzol and ethylene dichloride (D) Methyl ethyl ketone (MEK

Last Answer : (C) Benzol and ethylene dichloride

The most suitable solvent for deasphalting vacuum residue is (A) Propane (B) Methyl ethyl ketone (C) Doctor's solution (D) Methanol amine

Description : The most suitable solvent for deasphalting vacuum residue is (A) Propane (B) Methyl ethyl ketone (C) Doctor's solution (D) Methanol amine

Last Answer : (B) Methyl ethyl ketone

Which of the following is used as a solvent in deasphalting of petroleum products? (A) Furfural (B) Propane (C) Methyl ethyl ketone (D) Liquid sulphur dioxide

Description : Which of the following is used as a solvent in deasphalting of petroleum products? (A) Furfural (B) Propane (C) Methyl ethyl ketone (D) Liquid sulphur dioxide

Last Answer : (B) Propane

The commonly used solvent in supercritical extraction is (A) Methyl ethyl ketone (B) Water (C) Carbon tetrachloride (D) Carbon dioxide

Description : The commonly used solvent in supercritical extraction is (A) Methyl ethyl ketone (B) Water (C) Carbon tetrachloride (D) Carbon dioxide

Last Answer : (D) Carbon dioxide

Solvent used for extraction of oil is (A) Hexane (B) Methyl ethyl ketone (C) Furfural (D) None of these

Description : Solvent used for extraction of oil is (A) Hexane (B) Methyl ethyl ketone (C) Furfural (D) None of these

Last Answer : (A) Hexane

Furfural solvent extraction is used for upgrading (by dissolving aromatics) (A) Naphtha (B) Lubricating oils (C) Wax (D) Cracking feedstock

Description : Furfural solvent extraction is used for upgrading (by dissolving aromatics) (A) Naphtha (B) Lubricating oils (C) Wax (D) Cracking feedstock

Last Answer : (B) Lubricating oils

Feedstock for polymerisation is (A) Naphtha (B) Cracked gases rich in C2 & C4 olefins (C) Low boiling aromatics (D) None of these

Description : Feedstock for polymerisation is (A) Naphtha (B) Cracked gases rich in C2 & C4 olefins (C) Low boiling aromatics (D) None of these

Last Answer : (B) Cracked gases rich in C2 & C4 olefins

When ethylene glycol is heated with concentrated HNO3, it forms (a) Oxalic acid (b) Ethylene oxide (c) Dioxane (d) Diethylene glycol

Description : When ethylene glycol is heated with concentrated HNO3, it forms (a) Oxalic acid (b) Ethylene oxide (c) Dioxane (d) Diethylene glycol

Last Answer : Oxalic acid

Which is used in preparation of dynamite? (1) glycerol (2) ethyl alcohol (3) methyl alcohol (4) glycol

Description : Which is used in preparation of dynamite? (1) glycerol (2) ethyl alcohol (3) methyl alcohol (4) glycol

Last Answer : (1) glycerol Explanation: Dynamite is an explosive made of nitroglycerin, sorbents (such as powdered shells or clay) and stabilizers. It was invented by the Swedish chemist and engineer Alfred Nobel in Geesthacht, and patented in 1867.

Which is used in preparation of dynamite? (1) glycerol (2) ethyl alcohol (3) methyl alcohol (4) glycol

Description : Which is used in preparation of dynamite? (1) glycerol (2) ethyl alcohol (3) methyl alcohol (4) glycol

Last Answer : (1) glycerol Explanation: Dynamite is an explosive made of nitroglycerin, sorbents (such as powdered shells or clay) and stabilizers. It was invented by the Swedish chemist and engineer Alfred Nobel in Geesthacht, and patented in 1867.

The alcohol used in the preparation of dynamite is----? A. ethyl alcohol B. glycerol (Answer) C. glycol D. methyl alcohol

Description : The alcohol used in the preparation of dynamite is----? A. ethyl alcohol B. glycerol (Answer) C. glycol D. methyl alcohol

Last Answer : B. glycerol (Answer)

Which of the following statements is false? (a) Diethyl ether has been used as a general anesthetic (b) Ethyl alcohol is present in all alcoholic beverages (c) Methyl alcohol is produced by fermentation of sugars (d) Ethylene glycol is a common antifreeze for automobiles

Description : Which of the following statements is false? (a) Diethyl ether has been used as a general anesthetic (b) Ethyl alcohol is present in all alcoholic beverages (c) Methyl alcohol is produced by fermentation of sugars (d) Ethylene glycol is a common antifreeze for automobiles

Last Answer : Methyl alcohol is produced by fermentation of sugars

What is different between methyl ethyl ketone and paint thinner?

Description : What is different between methyl ethyl ketone and paint thinner?

Last Answer : paint thinner is any solvent used either to thin paint or cleanup after finishing painting, typically a mixture of organic solvents with mineral spirits being a major componentmethyl ethyl ketone is an ... be a component in a given brand of paint thinner, also available as a separate product

When ethyl acetoacetate is subjected to ketonic hydrolysis, the ketoneobtained is(a) Dimethyl ketone(b) Methyl ethyl ketone(c) Diethyl ketone(d) Methyl n-propyl ketone

Description : When ethyl acetoacetate is subjected to ketonic hydrolysis, the ketone obtained is (a) Dimethyl ketone (b) Methyl ethyl ketone (c) Diethyl ketone (d) Methyl n-propyl ketone

Last Answer : Diethyl ketone

Refrigerants commonly used for domestic refrigerators are (A) Ethyl chloride or methyl chloride (B) Freon-12 (C) Propane (D) NH3 or CO2

Description : Refrigerants commonly used for domestic refrigerators are (A) Ethyl chloride or methyl chloride (B) Freon-12 (C) Propane (D) NH3 or CO2

Last Answer : (A) Ethyl chloride or methyl chloride

Deoiling is the process of removal of oil from wax. It is done by the __________ process. (A) Solvent extraction (B) Sweating (C) Resettling (D) All (A), (B) & (C)

Description : Deoiling is the process of removal of oil from wax. It is done by the __________ process. (A) Solvent extraction (B) Sweating (C) Resettling (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Polymerisation (A) Produces i-octane from cracked gases containing i-butane and butene (B) Causes olefins to combine with each other (C) Causes aromatics to combine with each other (D) Is aimed at producing lubricating oil

Description : Polymerisation (A) Produces i-octane from cracked gases containing i-butane and butene (B) Causes olefins to combine with each other (C) Causes aromatics to combine with each other (D) Is aimed at producing lubricating oil

Last Answer : (B) Causes olefins to combine with each other

An aqueous solution of glucose behaves as an aldehyde because __________. (a) it is hydrolyzed by water to the free aldehyde (b) it is a ketone, but is in equilibrium with the aldehyde form (c) glucose is actually a cyclic aldehyde (d) its cyclic hemiacetal, the predominant form, is in equilibrium with the free aldehyde form

Description : An aqueous solution of glucose behaves as an aldehyde because __________. (a) it is hydrolyzed by water to the free aldehyde (b) it is a ketone, but is in equilibrium with the aldehyde form ... aldehyde (d) its cyclic hemiacetal, the predominant form, is in equilibrium with the free aldehyde form

Last Answer : its cyclic hemiacetal, the predominant form, is in equilibrium with the free aldehyde form

Acetic acid will be most economically separated from a dilute solution of acetic acid in water by (A) Solvent extraction (B) Continuous distillation (C) Evaporation (D) Absorption

Description : Acetic acid will be most economically separated from a dilute solution of acetic acid in water by (A) Solvent extraction (B) Continuous distillation (C) Evaporation (D) Absorption

Last Answer : (A) Solvent extraction

Solvent naphtha' used mostly as a solvent in paints and perfumery is produced by the __________ of virgin naphtha into small boiling range cuts. (A) Steam reforming (B) Distillation (C) Desulphurisation (D) None of these

Description : Solvent naphtha' used mostly as a solvent in paints and perfumery is produced by the __________ of virgin naphtha into small boiling range cuts. (A) Steam reforming (B) Distillation (C) Desulphurisation (D) None of these

Last Answer : (B) Distillation

The rate of solid-liquid extraction is limited by the (A) Phase change of the solute as it dissolves in the solvent (B) Diffusion of the solute through the solvent in the pores to the outside of the particle (C) Diffusion of the solute from the solution in contact with the particle to the main bulk of the solution (D) All 'a', 'b' & 'c'

Description : The rate of solid-liquid extraction is limited by the (A) Phase change of the solute as it dissolves in the solvent (B) Diffusion of the solute through the solvent in the pores to the outside of the particle (C) ... contact with the particle to the main bulk of the solution (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium solubility curve in case of a single component stripper (C) The operating pressure in solvent extraction system should be below vapor pressures of all components (D) The solubility of a particular gas in ideal solution in any solvent is always the same

Description : Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium ... (D) The solubility of a particular gas in ideal solution in any solvent is always the same

Last Answer : (C) The operating pressure in solvent extraction system should be below vapor pressures of all components

The substance whose aqueous solution would be a better conductor of electricity than water is (a) cane sugar (b) glucose (c) common salt (d) ethyl alcohol

Description : The substance whose aqueous solution would be a better conductor of electricity than water is (a) cane sugar (b) glucose (c) common salt (d) ethyl alcohol

Last Answer : Ans:(c)

An aqueous solution is always a solution in which the: w) solute is water x) solute is a salt y) solvent is a salt z) solvent is water

Description : An aqueous solution is always a solution in which the: w) solute is water x) solute is a salt y) solvent is a salt z) solvent is water 

Last Answer : ANSWER: Z -- SOLVENT IS WATER

The starting material used for the manufacture of caprolactam is (A) Ethyl benzene (B) Cyclohexane (C) Ethylene glycol (D) DMT

Description : The starting material used for the manufacture of caprolactam is (A) Ethyl benzene (B) Cyclohexane (C) Ethylene glycol (D) DMT

Last Answer : (B) Cyclohexane

Define the following : Solute , Solvent , Solution , Aqueous Solution & Solubility.

Description : Define the following : Solute , Solvent , Solution , Aqueous Solution & Solubility.

Last Answer : Ans : Solute : The component of the solution present in smaller amount is called solute. It is also defined as the substance that gets dissolved in the solvent. Example : Glucose is solute in glucose solution. ... grams / 100 grams. Solubility of sugar in water at 100 degree C is 487 grams/100 ml.

Solvent used in Edeleanu process is (A) Furfural (B) Propane (C) Liquid SO2 (D) Phenol

Description : Solvent used in Edeleanu process is (A) Furfural (B) Propane (C) Liquid SO2 (D) Phenol

Last Answer : (C) Liquid SO2

Solvent used in the deasphalting process is (A) Furfural (B) Phenol (C) Propane (D) Hexane

Description : Solvent used in the deasphalting process is (A) Furfural (B) Phenol (C) Propane (D) Hexane

Last Answer : (C) Propane

Commonly used thinner in (A) Lacquer paints, is alcohol (B) Cellulose paints is ethyl acetate (C) Oil paints, is naphtha (D) All the above

Description : Commonly used thinner in (A) Lacquer paints, is alcohol (B) Cellulose paints is ethyl acetate (C) Oil paints, is naphtha (D) All the above

Last Answer : Answer: Option D

Smoke point of a test sample of kerosene is found to be 15 mm. On removal of __________ from it, the smoke point rises to 25 mm. (A) n-paraffins (B) Olefins (C) Aromatics (D) None of these

Description : Smoke point of a test sample of kerosene is found to be 15 mm. On removal of __________ from it, the smoke point rises to 25 mm. (A) n-paraffins (B) Olefins (C) Aromatics (D) None of these

Last Answer : (C) Aromatics

Which of the following is the costliest source of hydrogen needed for ammonia manufacture under Indian condition? (A) Electrolysis of water (B) Cryogenic removal of H2 from coke oven gas (C) Steam reforming of naphtha (D) Natural gas cracking

Description : Which of the following is the costliest source of hydrogen needed for ammonia manufacture under Indian condition? (A) Electrolysis of water (B) Cryogenic removal of H2 from coke oven gas (C) Steam reforming of naphtha (D) Natural gas cracking

Last Answer : (A) Electrolysis of water

Which of the following compounds is least soluble in water? (a) Glycerol (b) Ethyl alcohol (c) Ethylene glycol (d) Ethyl chloride

Description : Which of the following compounds is least soluble in water? (a) Glycerol (b) Ethyl alcohol (c) Ethylene glycol (d) Ethyl chloride

Last Answer : Ethyl chloride

Grease coatings on electrical contact surfaces increase contact resistance and should be removed with a/an _______________. A. small wire brush B. compressed air jet C. clean dry cloth D. 10% solution carbon solvent and water

Description : Grease coatings on electrical contact surfaces increase contact resistance and should be removed with a/an _______________. A. small wire brush B. compressed air jet C. clean dry cloth D. 10% solution carbon solvent and water

Last Answer : Answer: C

Ethylene oxide reacts with HBr to give (a) 1-Bromoethanol (b) Ethyl bromide (c) 2-Bromoethanol (c) Ethylene glycol

Description : Ethylene oxide reacts with HBr to give (a) 1-Bromoethanol (b) Ethyl bromide (c) 2-Bromoethanol (c) Ethylene glycol

Last Answer : 2-Bromoethanol

Ethylene reacts with oxygen in the presence of silver catalyst at 300°C to form (a) Diethyl ether (b) Ethylene glycol (c) Ethyl alcoho(d) Ethylene oxidel

Description : Ethylene reacts with oxygen in the presence of silver catalyst at 300°C to form (a) Diethyl ether (b) Ethylene glycol (c) Ethyl alcohol (d) Ethylene oxide

Last Answer : Ethylene oxide

Ethylene oxide undergoes acid-hydrolysis to form (a) Ethylene glycol (b) Formic acid (c) Ethyl alcohol (d) Acetic acid

Description : Ethylene oxide undergoes acid-hydrolysis to form (a) Ethylene glycol (b) Formic acid (c) Ethyl alcohol (d) Acetic acid

Last Answer : Ethylene glycol

Degree of freedom for leaching and solvent extraction process is (A) 0 (B) 1 (C) 2 (D) 3

Description : Degree of freedom for leaching and solvent extraction process is (A) 0 (B) 1 (C) 2 (D) 3

Last Answer : (D) 3

In a single stage extraction process, 10 kg of pure solvent S (containing no solute A) is mixed with 30 kg of feed F containing A at a mass fraction xf = 0.2. The mixture splits into an extract phase E and a raffinate phase R containing A at xB = 0.5 and xR = 0.05 respectively. The total mass of the extract phase is (in Kg) (A) 6.89 (B) 8.89 (C) 10 (D) 8.25

Description : In a single stage extraction process, 10 kg of pure solvent S (containing no solute A) is mixed with 30 kg of feed F containing A at a mass fraction xf = 0.2. The mixture splits into an extract phase E and a raffinate ... phase is (in Kg) (A) 6.89 (B) 8.89 (C) 10 (D) 8.25

Last Answer : (B) 8.89

1. Besides water and light which is more essential as a raw material for photosynthesis? 2. Which can impose reasonable restrictions on the Fundamental Rights of the Indian citizens? 3. Denatured spirit is a mixture of ethyl alcohol, methyl alcohol and which other thing? 4. What is the administrative capital of South Africa? 5. During the 1857 Revolt who captured Gwalior from the Scindhia ?

Description : 1. Besides water and light which is more essential as a raw material for photosynthesis? 2. Which can impose reasonable restrictions on the Fundamental Rights of the Indian citizens? 3. Denatured ... portion remaining above the sea level? 20. At which place is the famous Kailasha Temple located?

Last Answer : Answer : 1. CO2 2. Parliament 3. Pyridine 4. Pretoria 5. Rani Lakshmibai 6. Rabindranath Tagore 7. Profession Tax 8. Due to imbibition 9. Myanmar 10. Dandi March 11. 44th 12. Because of ... Young folded mountains 15. Lord Mountbatten 16. Deolali 17. Phototropism 18. 500 19. 1/10th 20. Ellora

Indicate the starting aldehyde or ketone from which each of the following compounds are formed by an aldol condensation reaction. (a)2-Ethyl-3-hydroxy

Description : Indicate the starting aldehyde or ketone from which each of the following compounds are formed by an aldol condensation reaction. (a)2-Ethyl-3-hydroxy

Last Answer : Indicate the starting aldehyde or ketone from which each of the following compounds are formed by an ... hexanal (b) 4-Hydroxy-4-methyl-2-pentanone

Indicate the starting aldehyde or ketone from which each of the following compounds are formed by an aldol condensation reaction. (a)2-Ethyl-3-hydroxy

Description : Indicate the starting aldehyde or ketone from which each of the following compounds are formed by an aldol condensation reaction. (a)2-Ethyl-3-hydroxy

Last Answer : Indicate the starting aldehyde or ketone from which each of the following compounds are formed by an ... hexanal (b) 4-Hydroxy-4-methyl-2-pentanone

All the following correctly describe the intermediate 3-OH-3-methyl glutaryl CoA except (A) It is generated enzymatically in the mitochondrial matrix (B) It is formed in the cytoplasm (C) It inhibits the first step in cholesterol synthesis (D) It is involved in the synthesis of ketone bodies

Description : All the following correctly describe the intermediate 3-OH-3-methyl glutaryl CoA except (A) It is generated enzymatically in the mitochondrial matrix (B) It is formed in the cytoplasm (C) It inhibits the first step in cholesterol synthesis (D) It is involved in the synthesis of ketone bodies

Last Answer : Answer : C

Complete removal of __________ from gasoline is done by Unisol process using caustic soda and methyl alcohol. (A) Waxes (B) Mercaptans (C) Asphalt (D) Diolefins

Description : Complete removal of __________ from gasoline is done by Unisol process using caustic soda and methyl alcohol. (A) Waxes (B) Mercaptans (C) Asphalt (D) Diolefins

Last Answer : (B) Mercaptans