Methyl tertiary butyl ether (MTBE), a high octane (octane no. = 115) gasoline blending component is produced by the simple additive reaction of isobutylene with (A) Methyl alcohol (B) Ethyl alcohol (C) Methane (D) Ethane

Methyl tertiary butyl ether (MTBE), a high octane (octane no. = 115)
gasoline blending component is produced by the simple additive reaction of
isobutylene with
(A) Methyl alcohol
(B) Ethyl alcohol
(C) Methane
(D) Ethane
by

1 Answer

Answer :

(A) Methyl alcohol
by

Related questions

__________ is produced using molasses as the starting raw material. (A) Methyl alcohol (B) Ethyl alcohol (C) Benzol (D) Dimethyl ether

Description : __________ is produced using molasses as the starting raw material. (A) Methyl alcohol (B) Ethyl alcohol (C) Benzol (D) Dimethyl ether

Last Answer : (B) Ethyl alcohol

Octane number of gasoline is obtained by comparing the performance of the engine when running on a mixture of the following hydrocarbons A. ethane and methane B. normal heptane and iso-octane C. iso-heptane and octane D. iso-octane and TEL

Description : Octane number of gasoline is obtained by comparing the performance of the engine when running on a mixture of the following hydrocarbons A. ethane and methane B. normal heptane and iso-octane C. iso-heptane and octane D. iso-octane and TEL

Last Answer : ANSWER : B

Which of the following statements is false? (a) Diethyl ether has been used as a general anesthetic (b) Ethyl alcohol is present in all alcoholic beverages (c) Methyl alcohol is produced by fermentation of sugars (d) Ethylene glycol is a common antifreeze for automobiles

Description : Which of the following statements is false? (a) Diethyl ether has been used as a general anesthetic (b) Ethyl alcohol is present in all alcoholic beverages (c) Methyl alcohol is produced by fermentation of sugars (d) Ethylene glycol is a common antifreeze for automobiles

Last Answer : Methyl alcohol is produced by fermentation of sugars

Wood spirit is – (1) Methyl alcohol (2) Ethyl alcohol (3) Butyl alcohol (4) Propyl alcohol

Description : Wood spirit is – (1) Methyl alcohol (2) Ethyl alcohol (3) Butyl alcohol (4) Propyl alcohol

Last Answer : (1) Methyl alcohol Explanation: Methanol is also known as methyl alcohol, wood alcohol, wood naphtha or wood spirits. It acquired the name "wood alcohol" because it was once produced ... is produced in a catalytic industrial process directly from carbon monoxide, carbon dioxide, and hydrogen.

The most suitable chemical which can be applied to the water surface for reducing evaporation is (A) Methyl alcohol (B) Ethyl alcohol (C) Cetyl alcohol (D) Butyl alcohol

Description : The most suitable chemical which can be applied to the water surface for reducing evaporation is (A) Methyl alcohol (B) Ethyl alcohol (C) Cetyl alcohol (D) Butyl alcohol

Last Answer : Answer: Option C

Wood spirit is (1) Methyl alcohol (2) Ethyl alcohol (3) Butyl alcohol (4) Propyl alcohol

Description : Wood spirit is (1) Methyl alcohol (2) Ethyl alcohol (3) Butyl alcohol (4) Propyl alcohol

Last Answer : Methyl alcohol

Straight run petrol as compared to methyl/ethyl alcohol has (A) Lower calorific value (B) Lower octane number (C) Higher specific gravity (D) Higher ignition temperature

Description : Straight run petrol as compared to methyl/ethyl alcohol has (A) Lower calorific value (B) Lower octane number (C) Higher specific gravity (D) Higher ignition temperature

Last Answer : (B) Lower octane number

Consider the following statements: 1. Methyl alcohol is added to denature ethyl alcohol. 2. Ethyl alcohol is also called grain alcohol. 3. Ethyl alcohol and dimethyl ether are isomers. 4. Swine flu is a viral disease, The correct statements are: (a) 1, 2 and 4 only (b) 1, 3 and 4 only (c) 1, 2, 3 and 4 (d) 1, 2 and 3 only

Description : Consider the following statements: 1. Methyl alcohol is added to denature ethyl alcohol. 2. Ethyl alcohol is also called grain alcohol. 3. Ethyl alcohol and dimethyl ether are isomers. 4. Swine flu is a viral disease, The correct ... ) 1, 3 and 4 only (c) 1, 2, 3 and 4 (d) 1, 2 and 3 only

Last Answer : Ans:(c)

Ethyl bromide reacts with sodium methoxide to form (a) Diethyl ether (b) Ethyl methyl ether (c) Dimethyl ether (d) n-Propyl alcohol

Description : Ethyl bromide reacts with sodium methoxide to form (a) Diethyl ether (b) Ethyl methyl ether (c) Dimethyl ether (d) n-Propyl alcohol

Last Answer : Ethyl methyl ether

When tertiary butyl alcohol is passed over reduced copper, the reaction taking placed is

Description : When tertiary butyl alcohol is passed over reduced copper, the reaction taking placed is

Last Answer : When tertiary butyl alcohol is passed over reduced copper, the reaction taking placed is A. oxidation B. reduction C. dehydration D. substitution

When tertiary butyl alcohol is passed over reduced copper, the reaction taking placed is

Description : When tertiary butyl alcohol is passed over reduced copper, the reaction taking placed is

Last Answer : When tertiary butyl alcohol is passed over reduced copper, the reaction taking placed is A. Ethylene B. Acetone C. Ether D. Acetaldehyde

When formaldehyde and potassium hydroxide are heated, we get (1) Acetylene (2) Methyl alcohol (3) Methane (4) Ethyl formate

Description : When formaldehyde and potassium hydroxide are heated, we get (1) Acetylene (2) Methyl alcohol (3) Methane (4) Ethyl formate

Last Answer : Methyl alcohol

Solvent deoiling process is used for separating oil and soft wax from hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two commonly used deoiling solvents. Use of former as the deoiling solvent has the advantages of the (A) Elimination of solvent drying facility (B) Higher nitration temperature (C) Lower solvent dilution ratio (D) All (A), (B) & (C)

Description : Solvent deoiling process is used for separating oil and soft wax from hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two commonly used deoiling solvents. Use of former as the deoiling solvent ... nitration temperature (C) Lower solvent dilution ratio (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Bisphenol A is produced by the condensation of acetone with (A) Formaldehyde (B) Ethyl alcohol (C) Diethyl ether (D) Phenol

Description : Bisphenol A is produced by the condensation of acetone with (A) Formaldehyde (B) Ethyl alcohol (C) Diethyl ether (D) Phenol

Last Answer : (D) Phenol

(A) Tertiary butyl carbonion is more stable than methyl carbanion. (R) `+I` effect of the three methyl groups in tertiary butyl carbanion tends to mak

Description : (A) Tertiary butyl carbonion is more stable than methyl carbanion. (R) `+I` effect of the three methyl groups in tertiary butyl carbanion tends to mak

Last Answer : (A) Tertiary butyl carbonion is more stable than methyl carbanion. (R) `+I` effect of the three methyl ... IF (A) is incorrect but (R) is correct.

lodex, a pain relief balm, has the smell of _______. (1) Methyl salicylate (2) Ethyl salicylate (3) Propyl salicylate (4) Butyl salicylate

Description : lodex, a pain relief balm, has the smell of _______. (1) Methyl salicylate (2) Ethyl salicylate (3) Propyl salicylate (4) Butyl salicylate

Last Answer : (1) Methyl salicylate Explanation: Iodex has the characteristic odour of Methyl salicylate, an organic ester naturally produced by many species of plants, particularly wintergreens. It is used in high ... as a rubefacient and analgesic in deep heating liniments to treat joint and muscular pain.

Which compound reacts most rapidly by an SN1 mechanism? (a) Methyl chloride(b) Isopropyl chloride(c) Ethyl chloride(d) tert-Butyl chloride

Description : Which compound reacts most rapidly by an SN1 mechanism? (a) Methyl chloride (b) Isopropyl chloride (c) Ethyl chloride (d) tert-Butyl chloride

Last Answer : tert-Butyl chloride

Iodex, a pain relief balm, has the smell of __________ . (1) Methyl salicylate (2) Ethyl salicylate (3) Propyl salicylate (4) Butyl salicylate

Description : Iodex, a pain relief balm, has the smell of __________ . (1) Methyl salicylate (2) Ethyl salicylate (3) Propyl salicylate (4) Butyl salicylate

Last Answer : Methyl salicylate

Pick out the wrong statement. (A) Alkylation produces a larger iso-paraffin (having higher octane number) from the reaction of an olefin with smaller iso-paraffin (B) Catalytic alkylation processes use HF, AlCl3 & H2SO4 as Catalysts (C) All the alkylation processes use very high temperature (> 1000°C) (D) Gasoline having an octane number of 90 can be produced by alkylation process

Description : Pick out the wrong statement. (A) Alkylation produces a larger iso-paraffin (having higher octane number) from the reaction of an olefin with smaller iso-paraffin (B) Catalytic alkylation processes use HF ... (> 1000°C) (D) Gasoline having an octane number of 90 can be produced by alkylation process

Last Answer : (C) All the alkylation processes use very high temperature (> 1000°C)

Tetra-ethyl lead is added in gasoline to (A) Increase its smoke point (B) Reduce gum formation(C) Reduce the pour point(D) Increase its octane numbe

Description : Tetra-ethyl lead is added in gasoline to (A) Increase its smoke point (B) Reduce gum formation (C) Reduce the pour point (D) Increase its octane numbe

Last Answer : (D) Increase its octane numbe

Most widely used solvent for dewaxing is (A) Methyl-ethyl-ketone (MEK) (B) Naphtha (C) Petroleum ether (D) Sodium plumbite

Description : Most widely used solvent for dewaxing is (A) Methyl-ethyl-ketone (MEK) (B) Naphtha (C) Petroleum ether (D) Sodium plumbite

Last Answer : (A) Methyl-ethyl-ketone (MEK)

Which of the following has the highest boiling point? (a) diethyl ether (b) n-Butyraldehyde (c) n-propyl chloride (d) n-Butyl alcohol

Description : Which of the following has the highest boiling point? (a) diethyl ether (b) n-Butyraldehyde (c) n-propyl chloride (d) n-Butyl alcohol

Last Answer : n-Butyl alcohol

Which hydrocarbon is formed by the action of sodium on ethyl iodide? (a) Methane (b) Ethane (c) Ethylene (d) Butane

Description : Which hydrocarbon is formed by the action of sodium on ethyl iodide? (a) Methane (b) Ethane (c) Ethylene (d) Butane

Last Answer : Ans:(d)

Which of the following mixtures does not form an azeotrope at atmospheric pressure? (A) Water-alcohol (B) Methyl alcohol-acetone (C) Butyl acetate-water (D) None of these

Description : Which of the following mixtures does not form an azeotrope at atmospheric pressure? (A) Water-alcohol (B) Methyl alcohol-acetone (C) Butyl acetate-water (D) None of these

Last Answer : (D) None of these

. In industrial nomenclature, alcohol means (A) Butyl alcohol (B) Propyl alcoho(C) Ethanol(D) Methyl alcohol

Description : . In industrial nomenclature, alcohol means (A) Butyl alcohol (B) Propyl alcoho (C) Ethanol (D) Methyl alcohol

Last Answer : (C) Ethanol

The two reference fuel used for cetane rating are (a) Cetane and iso octane (b) Cetane and tetra ethyl lead (c) Cetance and n-heptane (d) Cetane and α- methyl naphthalene

Description : The two reference fuel used for cetane rating are (a) Cetane and iso octane (b) Cetane and tetra ethyl lead (c) Cetance and n-heptane (d) Cetane and α- methyl naphthalene

Last Answer : Ans : d

Which of the following would have the highest boiling point? (a) Dimethyl ether (b) Diethyl ether (c) Ethyl methyl ether (d) Diisopropyl ether

Description : Which of the following would have the highest boiling point? (a) Dimethyl ether (b) Diethyl ether (c) Ethyl methyl ether (d) Diisopropyl ether

Last Answer : Diisopropyl ether

Diethyl ether on heating with excess concentrated HI gives (a) Methyl iodide (b) Isopropyl iodide (c) Ethyl iodide (d) n-Propyl iodide

Description : Diethyl ether on heating with excess concentrated HI gives (a) Methyl iodide (b) Isopropyl iodide (c) Ethyl iodide (d) n-Propyl iodide

Last Answer : Ethyl iodide

Which of the following reagents readily react with ethyl methyl ether? (a) NaOH (b) Conc HI (c) KMnO4 (d) H2O

Description : Which of the following reagents readily react with ethyl methyl ether? (a) NaOH (b) Conc HI (c) KMnO4 (d) H2O

Last Answer : Conc HI

Which of the following binary systems is an example of a maximum boiling azeotrope? (A) Water-hydrochloric acid (B) Acetone-carbon disulphide (C) Water-ethyl alcohol (D) n-heptane-n-octane

Description : Which of the following binary systems is an example of a maximum boiling azeotrope? (A) Water-hydrochloric acid (B) Acetone-carbon disulphide (C) Water-ethyl alcohol (D) n-heptane-n-octane

Last Answer : (A) Water-hydrochloric acid

Power alcohol as compared to straight run gasoline has lower (A) Calorific value (B) Octane number (C) Specific gravity (D) Viscosity

Description : Power alcohol as compared to straight run gasoline has lower (A) Calorific value (B) Octane number (C) Specific gravity (D) Viscosity

Last Answer : (A) Calorific value

The main use of heavy gas oil produced by the vacuum distillation unit is as a (A) Blending component for kerosene (B) Blending component for petrol (C) Feedstock for fluid catalytic cracking unit (D) None of these

Description : The main use of heavy gas oil produced by the vacuum distillation unit is as a (A) Blending component for kerosene (B) Blending component for petrol (C) Feedstock for fluid catalytic cracking unit (D) None of these

Last Answer : (C) Feedstock for fluid catalytic cracking unit

Presence of volatile compounds like gasoline, oil, alcohol, ether etc. in municipal sewers may cause (A) Explosion(B) Non biodegradable foam(C) Undesirable plant growth(D) Corrosion

Description : Presence of volatile compounds like gasoline, oil, alcohol, ether etc. in municipal sewers may cause (A) Explosion (B) Non biodegradable foam (C) Undesirable plant growth (D) Corrosion

Last Answer : (A) Explosion

Reduction of acetaldehyde with H2/Ni gives (a) Ethyl alcohol (b) Acetic acid (c) Ethylene (d) Ethane

Description : Reduction of acetaldehyde with H2/Ni gives (a) Ethyl alcohol (b) Acetic acid (c) Ethylene (d) Ethane

Last Answer : Ethyl alcohol

Ethanol amine is produced using ammonia and (A) Ethyl benzene (B) Ethylene oxide (C) Ethanol (D) Ethane

Description : Ethanol amine is produced using ammonia and (A) Ethyl benzene (B) Ethylene oxide (C) Ethanol (D) Ethane

Last Answer : (B) Ethylene oxide

Assuming roughly equivalent molecular weights, which of the following would have the highest boiling point? (a) a tertiary amine (b) a quaternary ammonium salt (c) an alcohol (d) an ether

Description : Assuming roughly equivalent molecular weights, which of the following would have the highest boiling point? (a) a tertiary amine (b) a quaternary ammonium salt (c) an alcohol (d) an ether

Last Answer : a quaternary ammonium salt

The major component in the LPG is - (1) methane (2) butane (3) ethane (4) propane

Description : The major component in the LPG is - (1) methane (2) butane (3) ethane (4) propane

Last Answer : (2) butane Explanation: Butanes are highly flammable, colourless, easily liquefied gases. When blended with propane and other hydrocarbons, it is referred to commercially as LPG, for liquified petroleum gas. It is used as a petrol component.

A major component of gobar gas is (a) ammonia (b) methane (c) ethane (d) butane.

Description : A major component of gobar gas is (a) ammonia (b) methane (c) ethane (d) butane.

Last Answer : (b) methane

The major component in the LPG is (1) methane (2) butane (3) ethane (4) propane

Description : The major component in the LPG is (1) methane (2) butane (3) ethane (4) propane

Last Answer : butane

Higher pressure in the reforming reactor (A) Increases coke formation (B) Increases the rate of reaction(C) Produces high octane number gasoline(D) None of these

Description : Higher pressure in the reforming reactor (A) Increases coke formation (B) Increases the rate of reaction (C) Produces high octane number gasoline (D) None of these

Last Answer : (D) None of these

Based on the intermolecular forces involved, which of the following molecules will have the lowest boiling point? w) ethane x) methyl alcohol y) methyl amine z) methyl fluoride

Description : Based on the intermolecular forces involved, which of the following molecules will have the lowest boiling point? w) ethane x) methyl alcohol y) methyl amine z) methyl fluoride

Last Answer : ANSWER: W -- ethane

Octane number (unleaded) of gasoline produced by isomerisation of butane may be about (A) 45 (B) 55 (C) 70 (D) 90

Description : Octane number (unleaded) of gasoline produced by isomerisation of butane may be about (A) 45 (B) 55 (C) 70 (D) 90

Last Answer : (C) 70

Octane number of gasoline produced by two stage fluidised catalytic cracking process is (A) 80 (B) 87 (C) 92 (D) 97

Description : Octane number of gasoline produced by two stage fluidised catalytic cracking process is (A) 80 (B) 87 (C) 92 (D) 97

Last Answer : (D) 97

Ethyl acetate on heating with sodium ethoxide gives (a) Ethyl acetoacetate (b) Sodium acetate (c) Ethyl alcohol (d) Diethyl ether

Description : Ethyl acetate on heating with sodium ethoxide gives (a) Ethyl acetoacetate (b) Sodium acetate (c) Ethyl alcohol (d) Diethyl ether

Last Answer : Ethyl acetoacetate

Ethyl alcohol reacts with concentrated H2SO4 at 140°C to form (a) Acetone (b) Ethylene (c) Diethyl ether (d) Acetic acid

Description : Ethyl alcohol reacts with concentrated H2SO4 at 140°C to form (a) Acetone (b) Ethylene (c) Diethyl ether (d) Acetic acid

Last Answer : Diethyl ether

Ethyl alcohol can react with concentrated H2SO4 to give (a) Ethylene (b) Diethyl ether (c) Ethyl hydrogen sulfate (d) All of these

Description : Ethyl alcohol can react with concentrated H2SO4 to give (a) Ethylene (b) Diethyl ether (c) Ethyl hydrogen sulfate (d) All of these

Last Answer : All of these

Which of the following compounds have planar molecules? (a) ethyl alcohol (b) formaldehyde (c) diethyl ether (d) 1,3-butadiene

Description : Which of the following compounds have planar molecules? (a) ethyl alcohol (b) formaldehyde (c) diethyl ether (d) 1,3-butadiene

Last Answer : 1,3-butadiene formaldehyde

Liquor poisoning generally occurs due to the presence of __________ in it. (A) Ethyl alcohol (B) Impurities (C) Methyl alcohol (D) Carbonic acid

Description : Liquor poisoning generally occurs due to the presence of __________ in it. (A) Ethyl alcohol (B) Impurities (C) Methyl alcohol (D) Carbonic acid

Last Answer : (C) Methyl alcohol

Liquor poisoning generally occurs due to the presence of __________ in it. (A) Ethyl alcohol (B) Impurities (C) Methyl alcohol (D) Carbonic acid

Description : Liquor poisoning generally occurs due to the presence of __________ in it. (A) Ethyl alcohol (B) Impurities (C) Methyl alcohol (D) Carbonic acid

Last Answer : (C) Methyl alcohol

Complete removal of __________ from gasoline is done by Unisol process using caustic soda and methyl alcohol. (A) Waxes (B) Mercaptans (C) Asphalt (D) Diolefins

Description : Complete removal of __________ from gasoline is done by Unisol process using caustic soda and methyl alcohol. (A) Waxes (B) Mercaptans (C) Asphalt (D) Diolefins

Last Answer : (B) Mercaptans