The most suitable solvent for deasphalting vacuum residue is (A) Propane (B) Methyl ethyl ketone (C) Doctor's solution (D) Methanol amine

The most suitable solvent for deasphalting vacuum residue is
(A) Propane
(B) Methyl ethyl ketone
(C) Doctor's solution
(D) Methanol amine
by

1 Answer

Answer :

(B) Methyl ethyl ketone
by

Related questions

Which of the following is used as a solvent in deasphalting of petroleum products? (A) Furfural (B) Propane (C) Methyl ethyl ketone (D) Liquid sulphur dioxide

Description : Which of the following is used as a solvent in deasphalting of petroleum products? (A) Furfural (B) Propane (C) Methyl ethyl ketone (D) Liquid sulphur dioxide

Last Answer : (B) Propane

Solvent used in the Udex (glycol) extraction process for removal of light aromatics from cracked naphtha is (A) Propane (B) Diethylene glycol (C) Aqueous solution (10% water) of diethylene glycol (D) Methyl ethyl ketone (MEK)

Description : Solvent used in the Udex (glycol) extraction process for removal of light aromatics from cracked naphtha is (A) Propane (B) Diethylene glycol (C) Aqueous solution (10% water) of diethylene glycol (D) Methyl ethyl ketone (MEK)

Last Answer : (C) Aqueous solution (10% water) of diethylene glycol

Solvent used in duo-sol extraction for lube oil upgradation is a mixture of (A) Propane & phenol-cresol mixture(B) Methyl ethyl ketone & glycol(C) Phenol & furfural(D) Propane & liquid sulphur dioxide

Description : Solvent used in duo-sol extraction for lube oil upgradation is a mixture of (A) Propane & phenol-cresol mixture (B) Methyl ethyl ketone & glycol (C) Phenol & furfural (D) Propane & liquid sulphur dioxide

Last Answer : (A) Propane & phenol-cresol mixture

Solvent used for dewaxing of petroleum products are (A) Furfural (B) Methyl ethyl ketone (MEK) (C) Propane (D) Both (B) & (C

Description : Solvent used for dewaxing of petroleum products are (A) Furfural (B) Methyl ethyl ketone (MEK) (C) Propane (D) Both (B) & (C

Last Answer : (C) Propane

Solvent deoiling process is used for separating oil and soft wax from hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two commonly used deoiling solvents. Use of former as the deoiling solvent has the advantages of the (A) Elimination of solvent drying facility (B) Higher nitration temperature (C) Lower solvent dilution ratio (D) All (A), (B) & (C)

Description : Solvent deoiling process is used for separating oil and soft wax from hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two commonly used deoiling solvents. Use of former as the deoiling solvent ... nitration temperature (C) Lower solvent dilution ratio (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Most widely used solvent for dewaxing is (A) Methyl-ethyl-ketone (MEK) (B) Naphtha (C) Petroleum ether (D) Sodium plumbite

Description : Most widely used solvent for dewaxing is (A) Methyl-ethyl-ketone (MEK) (B) Naphtha (C) Petroleum ether (D) Sodium plumbite

Last Answer : (A) Methyl-ethyl-ketone (MEK)

The solvent used in Barisol dewaxing process is (A) Hexane (B) Furfural (C) Benzol and ethylene dichloride (D) Methyl ethyl ketone (MEK

Description : The solvent used in Barisol dewaxing process is (A) Hexane (B) Furfural (C) Benzol and ethylene dichloride (D) Methyl ethyl ketone (MEK

Last Answer : (C) Benzol and ethylene dichloride

The commonly used solvent in supercritical extraction is (A) Methyl ethyl ketone (B) Water (C) Carbon tetrachloride (D) Carbon dioxide

Description : The commonly used solvent in supercritical extraction is (A) Methyl ethyl ketone (B) Water (C) Carbon tetrachloride (D) Carbon dioxide

Last Answer : (D) Carbon dioxide

Solvent used for extraction of oil is (A) Hexane (B) Methyl ethyl ketone (C) Furfural (D) None of these

Description : Solvent used for extraction of oil is (A) Hexane (B) Methyl ethyl ketone (C) Furfural (D) None of these

Last Answer : (A) Hexane

Solvent used in the deasphalting process is (A) Furfural (B) Phenol (C) Propane (D) Hexane

Description : Solvent used in the deasphalting process is (A) Furfural (B) Phenol (C) Propane (D) Hexane

Last Answer : (C) Propane

Which of the following would be most acidic? w) phenol x) methanol y) acetic acid z) methyl amine

Description : Which of the following would be most acidic? w) phenol x) methanol y) acetic acid z) methyl amine

Last Answer : ANSWER: C -- ACETIC ACID

Which of the following processes consumes hydrogen? (A) Fluid catalytic cracking (B) Visbreaking (C) Propane deasphalting (D) None of these

Description : Which of the following processes consumes hydrogen? (A) Fluid catalytic cracking (B) Visbreaking (C) Propane deasphalting (D) None of these

Last Answer : (A) Fluid catalytic cracking

What is different between methyl ethyl ketone and paint thinner?

Description : What is different between methyl ethyl ketone and paint thinner?

Last Answer : paint thinner is any solvent used either to thin paint or cleanup after finishing painting, typically a mixture of organic solvents with mineral spirits being a major componentmethyl ethyl ketone is an ... be a component in a given brand of paint thinner, also available as a separate product

When ethyl acetoacetate is subjected to ketonic hydrolysis, the ketoneobtained is(a) Dimethyl ketone(b) Methyl ethyl ketone(c) Diethyl ketone(d) Methyl n-propyl ketone

Description : When ethyl acetoacetate is subjected to ketonic hydrolysis, the ketone obtained is (a) Dimethyl ketone (b) Methyl ethyl ketone (c) Diethyl ketone (d) Methyl n-propyl ketone

Last Answer : Diethyl ketone

Refrigerants commonly used for domestic refrigerators are (A) Ethyl chloride or methyl chloride (B) Freon-12 (C) Propane (D) NH3 or CO2

Description : Refrigerants commonly used for domestic refrigerators are (A) Ethyl chloride or methyl chloride (B) Freon-12 (C) Propane (D) NH3 or CO2

Last Answer : (A) Ethyl chloride or methyl chloride

Is a methanol is burned and leaves a residue a chemical change?

Description : Is a methanol is burned and leaves a residue a chemical change?

Last Answer : Burning (an oxidation reaction) is a chemical change,

The most suitable chemical which can be applied to the water surface for reducing evaporation is (A) Methyl alcohol (B) Ethyl alcohol (C) Cetyl alcohol (D) Butyl alcohol

Description : The most suitable chemical which can be applied to the water surface for reducing evaporation is (A) Methyl alcohol (B) Ethyl alcohol (C) Cetyl alcohol (D) Butyl alcohol

Last Answer : Answer: Option C

An alcoholic amine residue is present in which of the following lipids? (A) Phosphatidic acid (B) Cholesterol (C) Sphingomyelin (D) Ganglioside

Description : An alcoholic amine residue is present in which of the following lipids? (A) Phosphatidic acid (B) Cholesterol (C) Sphingomyelin (D) Ganglioside

Last Answer : Answer : C

A lipid containing alcoholic amine residue is (A) Phosphatidic acid (B) Ganglioside (C) Glucocerebroside (D) Sphingomyelin

Description : A lipid containing alcoholic amine residue is (A) Phosphatidic acid (B) Ganglioside (C) Glucocerebroside (D) Sphingomyelin

Last Answer : Answer : D

Water-ethyl alcohol solution can be concentrated (in respect of alcohol concentration) by __________ distillation. (A) Atmospheric (B) Vacuum (C) High pressure (D) None of these

Description : Water-ethyl alcohol solution can be concentrated (in respect of alcohol concentration) by __________ distillation. (A) Atmospheric (B) Vacuum (C) High pressure (D) None of these

Last Answer : (B) Vacuum

Ethanol amine is produced using ammonia and (A) Ethyl benzene (B) Ethylene oxide (C) Ethanol (D) Ethane

Description : Ethanol amine is produced using ammonia and (A) Ethyl benzene (B) Ethylene oxide (C) Ethanol (D) Ethane

Last Answer : (B) Ethylene oxide

Nylon-66 is a polyamide of (A) Hexamethylene diamine and adipic acid (B) Adipic acid and methyl amine (C) Vinyl chloride and formaldehyde (D) None of these

Description : Nylon-66 is a polyamide of (A) Hexamethylene diamine and adipic acid (B) Adipic acid and methyl amine (C) Vinyl chloride and formaldehyde (D) None of these

Last Answer : (A) Hexamethylene diamine and adipic acid

Naphthols are derivates of (A) Methyl amine (B) Naphthalene (C) Phenol (D) Xylene

Description : Naphthols are derivates of (A) Methyl amine (B) Naphthalene (C) Phenol (D) Xylene

Last Answer : (B) Naphthalene

What is another name of Methyl alcohol or methanol?

Description : What is another name of Methyl alcohol or methanol?

Last Answer : Wood spirit

Indicate the starting aldehyde or ketone from which each of the following compounds are formed by an aldol condensation reaction. (a)2-Ethyl-3-hydroxy

Description : Indicate the starting aldehyde or ketone from which each of the following compounds are formed by an aldol condensation reaction. (a)2-Ethyl-3-hydroxy

Last Answer : Indicate the starting aldehyde or ketone from which each of the following compounds are formed by an ... hexanal (b) 4-Hydroxy-4-methyl-2-pentanone

Indicate the starting aldehyde or ketone from which each of the following compounds are formed by an aldol condensation reaction. (a)2-Ethyl-3-hydroxy

Description : Indicate the starting aldehyde or ketone from which each of the following compounds are formed by an aldol condensation reaction. (a)2-Ethyl-3-hydroxy

Last Answer : Indicate the starting aldehyde or ketone from which each of the following compounds are formed by an ... hexanal (b) 4-Hydroxy-4-methyl-2-pentanone

Ethyl cyanide (A) can be converted to ethyl amine (B) by:

Description : Ethyl cyanide (A) can be converted to ethyl amine (B) by:

Last Answer : Ethyl cyanide (A) can be converted to ethyl amine (B) by: A. `A overset(Sn //HCI)rarr B` B. `A ... LiAIH_(4))rarr B` D. both (a),(c) are correct

Road grade bitumen is produced from vacuum residue by its (A) Aeration (B) Pyrolysis (C) Hydrogenation (D) Steam reforming

Description : Road grade bitumen is produced from vacuum residue by its (A) Aeration (B) Pyrolysis (C) Hydrogenation (D) Steam reforming

Last Answer : (D) Steam reforming

Higher boiling fractions like atmospheric residue is distilled under vacuum at low temperature because at high temperature, there is a tendency of the predominance of(A) Thermal cracking(B) Gum formation(C) Coking(D) Discoloration

Description : Higher boiling fractions like atmospheric residue is distilled under vacuum at low temperature because at high temperature, there is a tendency of the predominance of (A) Thermal cracking (B) Gum formation (C) Coking (D) Discoloration

Last Answer : (C) Coking

Catalytic cracking compared to thermal cracking of residue of vacuum distillation of crude oil (A) Gives higher yield of petrol (B) Lower octane number of petrol (C) Higher sulphur content in the product (D) Higher gum forming material in petro

Description : Catalytic cracking compared to thermal cracking of residue of vacuum distillation of crude oil (A) Gives higher yield of petrol (B) Lower octane number of petrol (C) Higher sulphur content in the product (D) Higher gum forming material in petro

Last Answer : (A) Gives higher yield of petrol

Which is the most ideal feed stock for 'coking' process used for the manufacture of petroleum coke? (A) Naphtha (B) Vacuum residue (C) Light gas oil (D) Diesel

Description : Which is the most ideal feed stock for 'coking' process used for the manufacture of petroleum coke? (A) Naphtha (B) Vacuum residue (C) Light gas oil (D) Diesel

Last Answer : (B) Vacuum residue

All the following correctly describe the intermediate 3-OH-3-methyl glutaryl CoA except (A) It is generated enzymatically in the mitochondrial matrix (B) It is formed in the cytoplasm (C) It inhibits the first step in cholesterol synthesis (D) It is involved in the synthesis of ketone bodies

Description : All the following correctly describe the intermediate 3-OH-3-methyl glutaryl CoA except (A) It is generated enzymatically in the mitochondrial matrix (B) It is formed in the cytoplasm (C) It inhibits the first step in cholesterol synthesis (D) It is involved in the synthesis of ketone bodies

Last Answer : Answer : C

Solvent used in Edeleanu process is (A) Furfural (B) Propane (C) Liquid SO2 (D) Phenol

Description : Solvent used in Edeleanu process is (A) Furfural (B) Propane (C) Liquid SO2 (D) Phenol

Last Answer : (C) Liquid SO2

Tetra hydroglolate can be freed from N5 methyl tetrahydrofolate only by (A) Nor epinephrine (B) Ethanol amine (C) Nicotinamide (D) Vitamin B12

Description : Tetra hydroglolate can be freed from N5 methyl tetrahydrofolate only by (A) Nor epinephrine (B) Ethanol amine (C) Nicotinamide (D) Vitamin B12

Last Answer : Answer : D

Pkb of aniline is more than that of methyl amine.

Description : Pkb of aniline is more than that of methyl amine.

Last Answer : In aniline, the lone pair of electrons on the N-atom are delocalized over the benzene ring. As a result electron density on the nitrogen decreases. In contrast in CH2NH2 , + I effect of CH3 ... , aniline is a weaker base than methylamine and hence its Pkb value is higher than that of methylamine.

Carbylamine test involves heating a mixture of (a) alcoholic KOH, methyl iodide, and sodium metal (b) alcoholic KOH, methyl iodide, and primary amine (c) alcoholic KOH, chloroform, and primary amine (d) alcoholic KOH, methyl alcohol, and primary amine

Description : Carbylamine test involves heating a mixture of (a) alcoholic KOH, methyl iodide, and sodium metal (b) alcoholic KOH, methyl iodide, and primary amine (c) alcoholic KOH, chloroform, and primary amine (d) alcoholic KOH, methyl alcohol, and primary amine

Last Answer : alcoholic KOH, chloroform, and primary amine

Based on the intermolecular forces involved, which of the following molecules will have the lowest boiling point? w) ethane x) methyl alcohol y) methyl amine z) methyl fluoride

Description : Based on the intermolecular forces involved, which of the following molecules will have the lowest boiling point? w) ethane x) methyl alcohol y) methyl amine z) methyl fluoride

Last Answer : ANSWER: W -- ethane

The monomer of natural rubber is (A) DMT (B) Isoprene (C) 2 methyl-1 propane (D) Both (B) and (C

Description : The monomer of natural rubber is (A) DMT (B) Isoprene (C) 2 methyl-1 propane (D) Both (B) and (C

Last Answer : (D) Both (B) and (C

Straight run petrol as compared to methyl/ethyl alcohol has (A) Lower calorific value (B) Lower octane number (C) Higher specific gravity (D) Higher ignition temperature

Description : Straight run petrol as compared to methyl/ethyl alcohol has (A) Lower calorific value (B) Lower octane number (C) Higher specific gravity (D) Higher ignition temperature

Last Answer : (B) Lower octane number

Methyl tertiary butyl ether (MTBE), a high octane (octane no. = 115) gasoline blending component is produced by the simple additive reaction of isobutylene with (A) Methyl alcohol (B) Ethyl alcohol (C) Methane (D) Ethane

Description : Methyl tertiary butyl ether (MTBE), a high octane (octane no. = 115) gasoline blending component is produced by the simple additive reaction of isobutylene with (A) Methyl alcohol (B) Ethyl alcohol (C) Methane (D) Ethane

Last Answer : (A) Methyl alcohol

Grignard reagent is chemically known as (A) Ethyl magnesium chloride (B) Methyl magnesium chloride (C) Dichlorophenol (D) Monochloroacetic acid

Description : Grignard reagent is chemically known as (A) Ethyl magnesium chloride (B) Methyl magnesium chloride (C) Dichlorophenol (D) Monochloroacetic acid

Last Answer : (A) Ethyl magnesium chloride

__________ is produced using molasses as the starting raw material. (A) Methyl alcohol (B) Ethyl alcohol (C) Benzol (D) Dimethyl ether

Description : __________ is produced using molasses as the starting raw material. (A) Methyl alcohol (B) Ethyl alcohol (C) Benzol (D) Dimethyl ether

Last Answer : (B) Ethyl alcohol

Liquor poisoning generally occurs due to the presence of __________ in it. (A) Ethyl alcohol (B) Impurities (C) Methyl alcohol (D) Carbonic acid

Description : Liquor poisoning generally occurs due to the presence of __________ in it. (A) Ethyl alcohol (B) Impurities (C) Methyl alcohol (D) Carbonic acid

Last Answer : (C) Methyl alcohol

Liquor poisoning generally occurs due to the presence of __________ in it. (A) Ethyl alcohol (B) Impurities (C) Methyl alcohol (D) Carbonic acid

Description : Liquor poisoning generally occurs due to the presence of __________ in it. (A) Ethyl alcohol (B) Impurities (C) Methyl alcohol (D) Carbonic acid

Last Answer : (C) Methyl alcohol

Which of the following is the most suitable feed for platforming process (reforming)? (A) Olefinic hydrocarbon (B) Naphtha (C) Fuel oil (D) Atmospheric residue

Description : Which of the following is the most suitable feed for platforming process (reforming)? (A) Olefinic hydrocarbon (B) Naphtha (C) Fuel oil (D) Atmospheric residue

Last Answer : (A) Olefinic hydrocarbon

For concentrating an aqueous solution of a material like anhydrous Na2SO4, whose solubility decreases with rise in temperature, the most suitable evaporator is a __________ evaporator. (A) High pressure (B) Vacuum (C) Backward feed (D) None of these

Description : For concentrating an aqueous solution of a material like anhydrous Na2SO4, whose solubility decreases with rise in temperature, the most suitable evaporator is a __________ evaporator. (A) High pressure (B) Vacuum (C) Backward feed (D) None of these

Last Answer : (B) Vacuum

Which among the following stage is suitable indicator when solution of sodium carbonate is mixed with sulphuric acid ? (1) Methylene blue (2) Methyl red (3) Phenolphthaline (4) Methyl orange

Description : Which among the following stage is suitable indicator when solution of sodium carbonate is mixed with sulphuric acid ? (1) Methylene blue (2) Methyl red (3) Phenolphthaline (4) Methyl orange

Last Answer : Methyl orange