The commonly used solvent in supercritical extraction is (A) Methyl ethyl ketone (B) Water (C) Carbon tetrachloride (D) Carbon dioxide

The commonly used solvent in supercritical extraction is

(A) Methyl ethyl ketone

(B) Water

(C) Carbon tetrachloride

(D) Carbon dioxide

by

1 Answer

Answer :

(D) Carbon dioxide
by

Related questions

Solvent used in duo-sol extraction for lube oil upgradation is a mixture of (A) Propane & phenol-cresol mixture(B) Methyl ethyl ketone & glycol(C) Phenol & furfural(D) Propane & liquid sulphur dioxide

Description : Solvent used in duo-sol extraction for lube oil upgradation is a mixture of (A) Propane & phenol-cresol mixture (B) Methyl ethyl ketone & glycol (C) Phenol & furfural (D) Propane & liquid sulphur dioxide

Last Answer : (A) Propane & phenol-cresol mixture

Solvent used in the Udex (glycol) extraction process for removal of light aromatics from cracked naphtha is (A) Propane (B) Diethylene glycol (C) Aqueous solution (10% water) of diethylene glycol (D) Methyl ethyl ketone (MEK)

Description : Solvent used in the Udex (glycol) extraction process for removal of light aromatics from cracked naphtha is (A) Propane (B) Diethylene glycol (C) Aqueous solution (10% water) of diethylene glycol (D) Methyl ethyl ketone (MEK)

Last Answer : (C) Aqueous solution (10% water) of diethylene glycol

Solvent used for extraction of oil is (A) Hexane (B) Methyl ethyl ketone (C) Furfural (D) None of these

Description : Solvent used for extraction of oil is (A) Hexane (B) Methyl ethyl ketone (C) Furfural (D) None of these

Last Answer : (A) Hexane

Solvent deoiling process is used for separating oil and soft wax from hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two commonly used deoiling solvents. Use of former as the deoiling solvent has the advantages of the (A) Elimination of solvent drying facility (B) Higher nitration temperature (C) Lower solvent dilution ratio (D) All (A), (B) & (C)

Description : Solvent deoiling process is used for separating oil and soft wax from hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two commonly used deoiling solvents. Use of former as the deoiling solvent ... nitration temperature (C) Lower solvent dilution ratio (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Which of the following is used as a solvent in deasphalting of petroleum products? (A) Furfural (B) Propane (C) Methyl ethyl ketone (D) Liquid sulphur dioxide

Description : Which of the following is used as a solvent in deasphalting of petroleum products? (A) Furfural (B) Propane (C) Methyl ethyl ketone (D) Liquid sulphur dioxide

Last Answer : (B) Propane

Most widely used solvent for dewaxing is (A) Methyl-ethyl-ketone (MEK) (B) Naphtha (C) Petroleum ether (D) Sodium plumbite

Description : Most widely used solvent for dewaxing is (A) Methyl-ethyl-ketone (MEK) (B) Naphtha (C) Petroleum ether (D) Sodium plumbite

Last Answer : (A) Methyl-ethyl-ketone (MEK)

The most suitable solvent for deasphalting vacuum residue is (A) Propane (B) Methyl ethyl ketone (C) Doctor's solution (D) Methanol amine

Description : The most suitable solvent for deasphalting vacuum residue is (A) Propane (B) Methyl ethyl ketone (C) Doctor's solution (D) Methanol amine

Last Answer : (B) Methyl ethyl ketone

The solvent used in Barisol dewaxing process is (A) Hexane (B) Furfural (C) Benzol and ethylene dichloride (D) Methyl ethyl ketone (MEK

Description : The solvent used in Barisol dewaxing process is (A) Hexane (B) Furfural (C) Benzol and ethylene dichloride (D) Methyl ethyl ketone (MEK

Last Answer : (C) Benzol and ethylene dichloride

Solvent used for dewaxing of petroleum products are (A) Furfural (B) Methyl ethyl ketone (MEK) (C) Propane (D) Both (B) & (C

Description : Solvent used for dewaxing of petroleum products are (A) Furfural (B) Methyl ethyl ketone (MEK) (C) Propane (D) Both (B) & (C

Last Answer : (C) Propane

. In which solvent are alkenes most soluble? (a) water (b) ethyl alcohol (c) ammonia (d) carbon tetrachloride

Description : . In which solvent are alkenes most soluble? (a) water (b) ethyl alcohol (c) ammonia (d) carbon tetrachloride

Last Answer : carbon tetrachloride

What is different between methyl ethyl ketone and paint thinner?

Description : What is different between methyl ethyl ketone and paint thinner?

Last Answer : paint thinner is any solvent used either to thin paint or cleanup after finishing painting, typically a mixture of organic solvents with mineral spirits being a major componentmethyl ethyl ketone is an ... be a component in a given brand of paint thinner, also available as a separate product

When ethyl acetoacetate is subjected to ketonic hydrolysis, the ketoneobtained is(a) Dimethyl ketone(b) Methyl ethyl ketone(c) Diethyl ketone(d) Methyl n-propyl ketone

Description : When ethyl acetoacetate is subjected to ketonic hydrolysis, the ketone obtained is (a) Dimethyl ketone (b) Methyl ethyl ketone (c) Diethyl ketone (d) Methyl n-propyl ketone

Last Answer : Diethyl ketone

To repair a small electrical motor that has been submerged in saltwater, you should _____________. A. wash it with fresh water and apply an external source of heat B. renew the windings C. send it ashore to an approved service facility D. rinse all electrical parts with a carbon tetrachloride cleaning solvent and then blow dry the motor with compressed air

Description : To repair a small electrical motor that has been submerged in saltwater, you should _____________. A. wash it with fresh water and apply an external source of heat B. renew the windings ... electrical parts with a carbon tetrachloride cleaning solvent and then blow dry the motor with compressed air

Last Answer : Answer: A

Vinegar is the trade name of - (1) acetic acid (2) chloroform (3) carbon tetrachloride (4) ethyl alcohol

Description : Vinegar is the trade name of - (1) acetic acid (2) chloroform (3) carbon tetrachloride (4) ethyl alcohol

Last Answer : (1) acetic acid Explanation: The trivial name acetic acid is the most commonly used and preferred IUPAC name. The systematic name ethanoic acid, a valid IUPAC name, is constructed according to the substitutive nomenclature.

If a small electric motor has been submerged in saltwater for a short period of time, you should _____________. A. send it ashore for rewinding B. rinse it with warm freshwater and bake it dry in an oven C. soak it in a bucket of commercial solvent and bake with internal heat D. clean it with carbon tetrachloride and blow it out with compressed air

Description : If a small electric motor has been submerged in saltwater for a short period of time, you should _____________. A. send it ashore for rewinding B. rinse it with warm freshwater and bake it dry ... and bake with internal heat D. clean it with carbon tetrachloride and blow it out with compressed air

Last Answer : Answer: B

Which of the following represents the accepted method of cleaning dust and foreign particles from electrical equipment while limiting damage to electric components? A. Carefully wiping off the components with a soft cotton rag. B. Blowing a high velocity stream of compressed air rapidly across the components. C. Using a vacuum cleaner to remove debris from the components. D. Using carbon tetrachloride as a cleaning solvent to clean the components.

Description : Which of the following represents the accepted method of cleaning dust and foreign particles from electrical equipment while limiting damage to electric components? A. Carefully wiping off the components ... the components. D. Using carbon tetrachloride as a cleaning solvent to clean the components.

Last Answer : Answer: C

This noncombustible liquid in its dry form is noncorrosive to common metals except aluminum. About 90% of all of this material which is manufactured goes into the production of chlorofluorocarbons. Is this substance: w) carbon tetrachloride x) methylene chloride y) hydrogen chloride z) methyl fluoride

Description : This noncombustible liquid in its dry form is noncorrosive to common metals except aluminum. About 90% of all of this material which is manufactured goes into the production of chlorofluorocarbons. ... substance: w) carbon tetrachloride x) methylene chloride y) hydrogen chloride z) methyl fluoride

Last Answer : ANSWER: W -- CARBON TETRACHLORIDE

The point of ultra-supercritical steam generator is to save on coal to heat the water and reduce ________ emissions. a. Oxygen (O2) b. Water (H2O) c. Carbon dioxide (CO2) d. Both ‘a’ and ‘c’

Description : The point of ultra-supercritical steam generator is to save on coal to heat the water and reduce ________ emissions. a. Oxygen (O2) b. Water (H2O) c. Carbon dioxide (CO2) d. Both ‘a’ and ‘c’

Last Answer : c. Carbon dioxide (CO2)

Refrigerants commonly used for domestic refrigerators are (A) Ethyl chloride or methyl chloride (B) Freon-12 (C) Propane (D) NH3 or CO2

Description : Refrigerants commonly used for domestic refrigerators are (A) Ethyl chloride or methyl chloride (B) Freon-12 (C) Propane (D) NH3 or CO2

Last Answer : (A) Ethyl chloride or methyl chloride

Ethyl alcohol is commonly made unfit for drinking by the addition of (a) potassium cyanide (b) methyl alcohol (c) chloroform (d) potassium chloride

Description : Ethyl alcohol is commonly made unfit for drinking by the addition of (a) potassium cyanide (b) methyl alcohol (c) chloroform (d) potassium chloride

Last Answer : Ans:(b)

The Green House Effect is caused by an excess of _____ A. Carbon dioxide B. Carbon monoxide C. Carbon tetrachloride D. None of the above

Description : The Green House Effect is caused by an excess of _____ A. Carbon dioxide B. Carbon monoxide C. Carbon tetrachloride D. None of the above

Last Answer : ANSWER: A

Indicate the starting aldehyde or ketone from which each of the following compounds are formed by an aldol condensation reaction. (a)2-Ethyl-3-hydroxy

Description : Indicate the starting aldehyde or ketone from which each of the following compounds are formed by an aldol condensation reaction. (a)2-Ethyl-3-hydroxy

Last Answer : Indicate the starting aldehyde or ketone from which each of the following compounds are formed by an ... hexanal (b) 4-Hydroxy-4-methyl-2-pentanone

Indicate the starting aldehyde or ketone from which each of the following compounds are formed by an aldol condensation reaction. (a)2-Ethyl-3-hydroxy

Description : Indicate the starting aldehyde or ketone from which each of the following compounds are formed by an aldol condensation reaction. (a)2-Ethyl-3-hydroxy

Last Answer : Indicate the starting aldehyde or ketone from which each of the following compounds are formed by an ... hexanal (b) 4-Hydroxy-4-methyl-2-pentanone

All the following correctly describe the intermediate 3-OH-3-methyl glutaryl CoA except (A) It is generated enzymatically in the mitochondrial matrix (B) It is formed in the cytoplasm (C) It inhibits the first step in cholesterol synthesis (D) It is involved in the synthesis of ketone bodies

Description : All the following correctly describe the intermediate 3-OH-3-methyl glutaryl CoA except (A) It is generated enzymatically in the mitochondrial matrix (B) It is formed in the cytoplasm (C) It inhibits the first step in cholesterol synthesis (D) It is involved in the synthesis of ketone bodies

Last Answer : Answer : C

The Killer gas which caused Bhopal gas tragedy in 1984 was (A) Phosgene (B) Methyl isocyanate (MIC) (C) Carbon monoxide (D) Sulphur dioxide

Description : The Killer gas which caused Bhopal gas tragedy in 1984 was (A) Phosgene (B) Methyl isocyanate (MIC) (C) Carbon monoxide (D) Sulphur dioxide

Last Answer : (B) Methyl isocyanate (MIC)

Urea is prepared by the chemical reactions of (a) Ammonium sulphate and calcium chloride (b) Ammonia and carbon dioxide (c) Chlorine and water (d) Acetamide and ethyl alcohol

Description : Urea is prepared by the chemical reactions of (a) Ammonium sulphate and calcium chloride (b) Ammonia and carbon dioxide (c) Chlorine and water (d) Acetamide and ethyl alcohol

Last Answer : Ans: (b)

What accumulates in the muscles after continuous strenuous physical exercise as a result of temporary anaerobic respiration that causes muscular fatigue? (1) ATP (2) Lactic acid (3) Ethyl alcohol (4) Carbon dioxide

Description : What accumulates in the muscles after continuous strenuous physical exercise as a result of temporary anaerobic respiration that causes muscular fatigue? (1) ATP (2) Lactic acid (3) Ethyl alcohol (4) Carbon dioxide

Last Answer : (2) Lactic acid Explanation: Anaerobic reactions break down glucose into pyruvic acid, which then reacts to produce lactic acid. As muscle metabolism shifts from aerobic to anaerobic ATP production, ... begins to accumulate in muscles and to appear in the bloodstream. This leads to muscle fatigue.

In fermentation reactions occurring in yeast, two products of metabolism are ______ and ______. a. Acid; Hydrogen Gas b. Hydrogen Gas; Sucrose c. Ethyl Alcohol; Methane d. Carbon Dioxide; Ethyl Alcohol

Description : In fermentation reactions occurring in yeast, two products of metabolism are ______ and ______. a. Acid; Hydrogen Gas b. Hydrogen Gas; Sucrose c. Ethyl Alcohol; Methane d. Carbon Dioxide; Ethyl Alcohol

Last Answer : a. Acid; Hydrogen Gas

What accumulates in the muscles after continuous strenuous physical exercise as a result of temporary anaerobic respiration that causes muscular fatigue ? (1) ATP (2) Lactic acid (3) Ethyl alcohol (4) Carbon dioxide

Description : What accumulates in the muscles after continuous strenuous physical exercise as a result of temporary anaerobic respiration that causes muscular fatigue ? (1) ATP (2) Lactic acid (3) Ethyl alcohol (4) Carbon dioxide

Last Answer : Lactic acid

Acetic acid will be most economically separated from a dilute solution of acetic acid in water by (A) Solvent extraction (B) Continuous distillation (C) Evaporation (D) Absorption

Description : Acetic acid will be most economically separated from a dilute solution of acetic acid in water by (A) Solvent extraction (B) Continuous distillation (C) Evaporation (D) Absorption

Last Answer : (A) Solvent extraction

The liquid used for the washing of coal in an industrial coal washery is a mixture of water and (A) Carbon tetrachloride (B) Sand (40%) (C) Mineral oil of high viscosity & specific gravity (1.6) (D) None of these

Description : The liquid used for the washing of coal in an industrial coal washery is a mixture of water and (A) Carbon tetrachloride (B) Sand (40%) (C) Mineral oil of high viscosity & specific gravity (1.6) (D) None of these

Last Answer : (B) Sand (40%)

A mercury (specific gravity = 13.6) manometer connected across an orificemeter fitted in a pipe shows a manometer reading of 2 cms. If the manometer liquid is changed to carbon tetrachloride (specific gravity = 1.6), then for the same flow rate of water the new manometer reading will be __________ cms. (A) 17 (B) 42(C) 84 (D) 1.8

Description : A mercury (specific gravity = 13.6) manometer connected across an orificemeter fitted in a pipe shows a manometer reading of 2 cms. If the manometer liquid is changed to carbon tetrachloride (specific gravity = 1.6), then ... new manometer reading will be __________ cms. (A) 17 (B) 42 (C) 84 (D) 1.8

Last Answer : __________ cms. (A) 17

Straight run petrol as compared to methyl/ethyl alcohol has (A) Lower calorific value (B) Lower octane number (C) Higher specific gravity (D) Higher ignition temperature

Description : Straight run petrol as compared to methyl/ethyl alcohol has (A) Lower calorific value (B) Lower octane number (C) Higher specific gravity (D) Higher ignition temperature

Last Answer : (B) Lower octane number

Methyl tertiary butyl ether (MTBE), a high octane (octane no. = 115) gasoline blending component is produced by the simple additive reaction of isobutylene with (A) Methyl alcohol (B) Ethyl alcohol (C) Methane (D) Ethane

Description : Methyl tertiary butyl ether (MTBE), a high octane (octane no. = 115) gasoline blending component is produced by the simple additive reaction of isobutylene with (A) Methyl alcohol (B) Ethyl alcohol (C) Methane (D) Ethane

Last Answer : (A) Methyl alcohol

Grignard reagent is chemically known as (A) Ethyl magnesium chloride (B) Methyl magnesium chloride (C) Dichlorophenol (D) Monochloroacetic acid

Description : Grignard reagent is chemically known as (A) Ethyl magnesium chloride (B) Methyl magnesium chloride (C) Dichlorophenol (D) Monochloroacetic acid

Last Answer : (A) Ethyl magnesium chloride

__________ is produced using molasses as the starting raw material. (A) Methyl alcohol (B) Ethyl alcohol (C) Benzol (D) Dimethyl ether

Description : __________ is produced using molasses as the starting raw material. (A) Methyl alcohol (B) Ethyl alcohol (C) Benzol (D) Dimethyl ether

Last Answer : (B) Ethyl alcohol

Liquor poisoning generally occurs due to the presence of __________ in it. (A) Ethyl alcohol (B) Impurities (C) Methyl alcohol (D) Carbonic acid

Description : Liquor poisoning generally occurs due to the presence of __________ in it. (A) Ethyl alcohol (B) Impurities (C) Methyl alcohol (D) Carbonic acid

Last Answer : (C) Methyl alcohol

Liquor poisoning generally occurs due to the presence of __________ in it. (A) Ethyl alcohol (B) Impurities (C) Methyl alcohol (D) Carbonic acid

Description : Liquor poisoning generally occurs due to the presence of __________ in it. (A) Ethyl alcohol (B) Impurities (C) Methyl alcohol (D) Carbonic acid

Last Answer : (C) Methyl alcohol

Pick out the wrong statement. (A) Critical moisture content is not a property of the material itself (B) A sharp increase in pressure drop gives an indication of the flooding in a distillation column (C) Separation of components is not possible in liquid extraction, if selectivity is unity (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Description : Pick out the wrong statement. (A) Critical moisture content is not a property of the material itself (B) A sharp increase in pressure drop gives an indication of the flooding in a ... unity (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Last Answer : (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Furfural solvent extraction is used for upgrading (by dissolving aromatics) (A) Naphtha (B) Lubricating oils (C) Wax (D) Cracking feedstock

Description : Furfural solvent extraction is used for upgrading (by dissolving aromatics) (A) Naphtha (B) Lubricating oils (C) Wax (D) Cracking feedstock

Last Answer : (B) Lubricating oils

Deoiling is the process of removal of oil from wax. It is done by the __________ process. (A) Solvent extraction (B) Sweating (C) Resettling (D) All (A), (B) & (C)

Description : Deoiling is the process of removal of oil from wax. It is done by the __________ process. (A) Solvent extraction (B) Sweating (C) Resettling (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

__________ treatment is done for appreciable improvement in viscosity index of lubricating oil. (A) Acid (B) Solvent extraction (C) Alkali (D) Clay

Description : __________ treatment is done for appreciable improvement in viscosity index of lubricating oil. (A) Acid (B) Solvent extraction (C) Alkali (D) Clay

Last Answer : (B) Solvent extraction

Deoiling of wax is done by its (A) Heating (B) Cooling (C) Solvent extraction (D) Both (B) & (C

Description : Deoiling of wax is done by its (A) Heating (B) Cooling (C) Solvent extraction (D) Both (B) & (C

Last Answer : (D) Both (B) & (C

The rate of solid-liquid extraction is limited by the (A) Phase change of the solute as it dissolves in the solvent (B) Diffusion of the solute through the solvent in the pores to the outside of the particle (C) Diffusion of the solute from the solution in contact with the particle to the main bulk of the solution (D) All 'a', 'b' & 'c'

Description : The rate of solid-liquid extraction is limited by the (A) Phase change of the solute as it dissolves in the solvent (B) Diffusion of the solute through the solvent in the pores to the outside of the particle (C) ... contact with the particle to the main bulk of the solution (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Solvent extraction is the terminology applied to the liquid-liquid extraction, which is preferred for the separation of the components of liquids, when (A) Extracting solvent is cheaply & abundantly available (B) One of the liquid components is heat sensitive (C) Viscosity of liquid components is very high (D) One of the liquid components has very high affinity towards the solvent

Description : Solvent extraction is the terminology applied to the liquid-liquid extraction, which is preferred for the separation of the components of liquids, when (A) Extracting solvent is cheaply & abundantly available ... very high (D) One of the liquid components has very high affinity towards the solvent

Last Answer : (D) One of the liquid components has very high affinity towards the solvent

Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium solubility curve in case of a single component stripper (C) The operating pressure in solvent extraction system should be below vapor pressures of all components (D) The solubility of a particular gas in ideal solution in any solvent is always the same

Description : Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium ... (D) The solubility of a particular gas in ideal solution in any solvent is always the same

Last Answer : (C) The operating pressure in solvent extraction system should be below vapor pressures of all components

Pick out the correct statement. (A) In case of liquid-liquid extraction, no separation is possible, if the selectivity of the solvent used is unity (B) With increase in temperature, the selectivity of the solvent used in solvent extraction decreases (C) The selectivity of solvent used in solvent extraction is unity at the plait point (D) All (A), (B) and (C)

Description : Pick out the correct statement. (A) In case of liquid-liquid extraction, no separation is possible, if the selectivity of the solvent used is unity (B) With increase in temperature, the selectivity of the solvent used ... in solvent extraction is unity at the plait point (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Selectivity of the solvent used in solvent extraction should be (A) 1 (B) > 1 (C) < 1 (D) 0

Description : Selectivity of the solvent used in solvent extraction should be (A) 1 (B) > 1 (C) < 1 (D) 0

Last Answer : (B) > 1

The solvent used in liquid-liquid extraction should have __________ less than one. (A) Selectivity (B) Distribution co-efficient(C) Both (A) and (B)(D) Neither (A) nor (B)

Description : The solvent used in liquid-liquid extraction should have __________ less than one. (A) Selectivity (B) Distribution co-efficient (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)