. Shift conversion reaction (A) Converts N2 and H2 into NH3 (B) Converts CO to CO2 with steam (C) Is non-catalytic (D) Is highly exothermic

. Shift conversion reaction
(A) Converts N2 and H2
into NH3
(B) Converts CO to CO2 with steam
(C) Is non-catalytic
(D) Is highly exothermic
by

1 Answer

Answer :

(B) Converts CO to CO2 with steam
by

Related questions

Automobile exhaust is passed through two compartments catalytic converter employing platinum as catalyst for (A) Conversion of CO into CO2 in the second compartment (B) Conversion of NOx into N2 and NH3 in the first compartment (C) Oxidation of unburnt hydrocarbon fuel in the second compartment (D) All (A), (B) and (C)

Description : Automobile exhaust is passed through two compartments catalytic converter employing platinum as catalyst for (A) Conversion of CO into CO2 in the second compartment (B) Conversion of NOx into N2 and NH3 in the first ... of unburnt hydrocarbon fuel in the second compartment (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

For the reversible exothermic reaction, N2 + 3H2 ⇌ 2NH3, increase of pressure would (A) Shift the equilibrium towards right (B) Give higher yield of NH3 (C) Both (B) and (C) (D) Neither (A) nor (B)

Description : For the reversible exothermic reaction, N2 + 3H2 ⇌ 2NH3, increase of pressure would (A) Shift the equilibrium towards right (B) Give higher yield of NH3 (C) Both (B) and (C) (D) Neither (A) nor (B)

Last Answer : (C) Both (B) and (C)

Raw materials for urea production are (A) CO2 and N2 (B) CO2 , H2 and N2 (C) NH3 and CO (D) HNO3 and CaCO3

Description : Raw materials for urea production are (A) CO2 and N2 (B) CO2 , H2 and N2 (C) NH3 and CO (D) HNO3 and CaCO3

Last Answer : (B) CO2 , H2 and N2

Formation of ammonium carbamate by reaction of NH3 with CO2 is a/an __________ reaction. (A) Catalytic (B) Exothermic (C) Endothermic (D) Reversible

Description : Formation of ammonium carbamate by reaction of NH3 with CO2 is a/an __________ reaction. (A) Catalytic (B) Exothermic (C) Endothermic (D) Reversible

Last Answer : (B) Exothermic

The shift conversion reaction taking place during water gas manufacture is given by (A) C + H2O ↔ CO + H2 (B) C + 2H2O ↔ CO2 + 2H2 (C) CO + H2O ↔ CO2 + H2 (D) None of these

Description : The shift conversion reaction taking place during water gas manufacture is given by (A) C + H2O ↔ CO + H2 (B) C + 2H2O ↔ CO2 + 2H2 (C) CO + H2O ↔ CO2 + H2 (D) None of these

Last Answer : (C) CO + H2O ↔ CO2 + H2

The gasification reaction represented by, C + H2O = CO + H2 , is (A) Exothermic (B) Endothermic (C) Catalytic (D) Autocatalytic

Description : The gasification reaction represented by, C + H2O = CO + H2 , is (A) Exothermic (B) Endothermic (C) Catalytic (D) Autocatalytic

Last Answer : (B) Endothermic

The gasification reaction represented by, C + H2O = CO + H2 , is a/an __________ reaction. (A) Exothermic (B) Endothermic (C) Catalytic (D) Autocatalytic

Description : The gasification reaction represented by, C + H2O = CO + H2 , is a/an __________ reaction. (A) Exothermic (B) Endothermic (C) Catalytic (D) Autocatalytic

Last Answer : (B) Endothermic

Pick out the exothermic reaction out of the following: (A) C + H2O = CO + H2 (B) CaC2 + H2O = Ca(OH)2 + C2H2 (C) MgCO3 = MgO + CO2 (D) All (A), (B) and (C)

Description : Pick out the exothermic reaction out of the following: (A) C + H2O = CO + H2 (B) CaC2 + H2O = Ca(OH)2 + C2H2 (C) MgCO3 = MgO + CO2 (D) All (A), (B) and (C)

Last Answer : (B) CaC2 + H2O = Ca(OH)2 + C2H2

Forward reaction will be favoured for the exothermic reaction, represented by CO + H2O ⇌ CO2 + H2, by (A) Low temperature and high pressure (B) Low temperature and low pressure (C) High temperature and high pressure (D) High temperature and low pressure

Description : Forward reaction will be favoured for the exothermic reaction, represented by CO + H2O ⇌ CO2 + H2, by (A) Low temperature and high pressure (B) Low temperature and low pressure (C) High temperature and high pressure (D) High temperature and low pressure

Last Answer : (A) Low temperature and high pressure

Which of the following can be regarded as gas so that gas laws could be applicable, within the commonly encountered temperature limits.  (a) 02, N2, steam, C02  (b) Oz, N2, water vapour  (c) S02, NH3, C02, moisture  (d) 02, N2, H2, air  (e) steam vapours, H2, C02.

Description : Which of the following can be regarded as gas so that gas laws could be applicable, within the commonly encountered temperature limits.  (a) 02, N2, steam, C02  (b) Oz, N2, water vapour  (c) S02, NH3, C02, moisture  (d) 02, N2, H2, air  (e) steam vapours, H2, C02.

Last Answer : Answer : d

Conversion of CO to CO2 by steam in presence of a catalyst is called (A) Steam reforming (B) Shift conversion (C) Steam gasification (D) None of these

Description : Conversion of CO to CO2 by steam in presence of a catalyst is called (A) Steam reforming (B) Shift conversion (C) Steam gasification (D) None of these

Last Answer : (B) Shift conversion

. Water gas constitutes mainly of (A) CO & H2 (B) CO & N2 (C) CO2 & H2 (D) CH4 & H2

Description : . Water gas constitutes mainly of (A) CO & H2 (B) CO & N2 (C) CO2 & H2 (D) CH4 & H2

Last Answer : (A) CO & H2

Largest constituent of blast furnace gas is (A) N2 (B) CO (C) CO2 (D) H2

Description : Largest constituent of blast furnace gas is (A) N2 (B) CO (C) CO2 (D) H2

Last Answer : (A) N2

Producer gas comprises mainly of (A) CO & N2 (B) CO & H2 (C) CO2 & N2 (D) CO2 & H2

Description : Producer gas comprises mainly of (A) CO & N2 (B) CO & H2 (C) CO2 & N2 (D) CO2 & H2

Last Answer : (A) CO & N2

Main constituents of purified Lurgi gas are (A) H2 , CmHn & CO2 (B) CO, H2 & CH4 (C) CO2 , O2 & CO (D) N2 , H2 & CO2

Description : Main constituents of purified Lurgi gas are (A) H2 , CmHn & CO2 (B) CO, H2 & CH4 (C) CO2 , O2 & CO (D) N2 , H2 & CO2

Last Answer : (B) CO, H2 & CH4

Blast furnace gas constitutes mainly of (A) N2 & CH4 (B) N2 & H2 (C) N2 & CO (D) CH4 & CO2

Description : Blast furnace gas constitutes mainly of (A) N2 & CH4 (B) N2 & H2 (C) N2 & CO (D) CH4 & CO2

Last Answer : (C) N2 & CO

Synthesis gas' meant for the synthesis of organic compound is a variable mixture of (A) N2 & H2 (B) CO2 & H2 (C) CO & H2 (D) C & H2

Description : Synthesis gas' meant for the synthesis of organic compound is a variable mixture of (A) N2 & H2 (B) CO2 & H2 (C) CO & H2 (D) C & H2

Last Answer : (C) CO & H2

Producer gas consists mainly of (A) CO, CO2 N2 , H2 (B) CO, H2 (C) H2 , CH4 (D) C2H2 , CO2 , H2

Description : Producer gas consists mainly of (A) CO, CO2 N2 , H2 (B) CO, H2 (C) H2 , CH4 (D) C2H2 , CO2 , H2

Last Answer : (A) CO, CO2 N2 , H2

Synthesis gas is a mixture of (A) CO and H2 (B) N2 and H2 (C) H2 , CH4 and CO (D) CO2 and H2

Description : Synthesis gas is a mixture of (A) CO and H2 (B) N2 and H2 (C) H2 , CH4 and CO (D) CO2 and H2

Last Answer : (A) CO and H2

Producer gas is a mixture of (a) CO and H2 (b) CO and N2 (c) CH4 and H2 (d) CO2 and H2

Description : Producer gas is a mixture of (a) CO and H2 (b) CO and N2 (c) CH4 and H2 (d) CO2 and H2

Last Answer : Ans:(a)

Water gas is a mixture of (A) CO2 and O2 (B) O2 and H2 (C) H2, N2 and O2 (D) CO, N2 and H2.

Description : Water gas is a mixture of (A) CO2 and O2 (B) O2 and H2 (C) H2, N2 and O2 (D) CO, N2 and H2.

Last Answer : CO, N2 and H2.

A green house gas is a) H2 b) CO c) CO2 d) N2.

Description : A green house gas is a) H2 b) CO c) CO2 d) N2.

Last Answer : c) CO2

Multistage catalytic converter is not used in the (A) Conversion of SO2 to SO3 (B) NH3 synthesis reaction (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Multistage catalytic converter is not used in the (A) Conversion of SO2 to SO3 (B) NH3 synthesis reaction (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (B) NH3 synthesis reaction

Steam reforming of naphtha produces ammonia synthesis gas. This is a/an __________ process. (A) Autocatalytic (B) Endothermic (C) Exothermic (D) Non-catalytic

Description : Steam reforming of naphtha produces ammonia synthesis gas. This is a/an __________ process. (A) Autocatalytic (B) Endothermic (C) Exothermic (D) Non-catalytic

Last Answer : (B) Endothermic

For high conversion in a highly exothermic solid catalysed reaction, use a __________ bed reactor. (A) Fixed (B) Fluidised bed reactor followed by a fixed (C) Fixed bed reactor followed by a fluidised (D) Fluidised

Description : For high conversion in a highly exothermic solid catalysed reaction, use a __________ bed reactor. (A) Fixed (B) Fluidised bed reactor followed by a fixed (C) Fixed bed reactor followed by a fluidised (D) Fluidised

Last Answer : (B) Fluidised bed reactor followed by a fixed

How many moles of H2 and N2 can be formed by the decomposition of 0.145 moles of ammonia, NH3?

Description : How many moles of H2 and N2 can be formed by the decomposition of 0.145 moles of ammonia, NH3?

Last Answer : All together now… WE WILL NOT DO YOUR HOMEWORK

What is the maximum amount of NH3 gas formed by mixing of 14 g N2 and 6 g H2 gases is?

Description : What is the maximum amount of NH3 gas formed by mixing of 14 g N2 and 6 g H2 gases is?

Last Answer : N2(g) + 3H2(g) ==> 2NH3(g) is the balanced equation for thisreaction.14 g N2 x 1 mole N2/28 g = 0.5 moles N2 present6 g H2 x 1 mole H2/2 g = 3 moles O2 presentIn this situation, the amount of N2 ... by the amount of N2.0.5 moles N2 x 2 moles NH3/1 mole N2 = 1 moles NH3 is themaximum amount of NH3.

Fauser Montecatini converter is used for (A) Ammonia synthesis (e.g. at FCI Sindri, India) (B) Methanation of CO and CO2 (C) Shift conversion (i.e. CO to CO2 ) (D) None of these

Description : Fauser Montecatini converter is used for (A) Ammonia synthesis (e.g. at FCI Sindri, India) (B) Methanation of CO and CO2 (C) Shift conversion (i.e. CO to CO2 ) (D) None of these

Last Answer : (A) Ammonia synthesis (e.g. at FCI Sindri, India)

During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98

Description : During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98

Last Answer : (D) 98

Which of the following gases has very high neutron capture cross￾section, making it unsuitable as a coolant in nuclear reactor? (A) N2 (B) He (C) CO2 (D) H2

Description : Which of the following gases has very high neutron capture cross￾section, making it unsuitable as a coolant in nuclear reactor? (A) N2 (B) He (C) CO2 (D) H2

Last Answer : (A) N2

Which is used as a coolant in nuclear reactor due to its high capture cross-section? (A) H2 (B) N2 (C) He (D) CO2

Description : Which is used as a coolant in nuclear reactor due to its high capture cross-section? (A) H2 (B) N2 (C) He (D) CO2

Last Answer : (A) H2

The calorific value of a gas of composition CO2 = 20%, H2 = 50%, CH4 = 30%, is y. If the composition of gas is changed to H2 = 50%, CH4 = 30%, CO2 = 10%, N2 = 10%, then the calorific value will be (A) y (B) 0.95 y (C) 1.05 y (D) 1.8 y

Description : The calorific value of a gas of composition CO2 = 20%, H2 = 50%, CH4 = 30%, is y. If the composition of gas is changed to H2 = 50%, CH4 = 30%, CO2 = 10%, N2 = 10%, then the calorific value will be (A) y (B) 0.95 y (C) 1.05 y (D) 1.8 y

Last Answer : (A) y

Coke oven gas burns with a yellowish flame, because of the presence of (A) CO2 (B) CH4 (C) H2(D) NH3

Description : Coke oven gas burns with a yellowish flame, because of the presence of (A) CO2 (B) CH4 (C) H2 (D) NH3

Last Answer : (B) CH4

Main component of sewage gas produced during anaerobic decomposition of organic waste (by suitable bacteria) during sewage disposal is (A) H2 (B) CH4 (C) CO2 (D) N2

Description : Main component of sewage gas produced during anaerobic decomposition of organic waste (by suitable bacteria) during sewage disposal is (A) H2 (B) CH4 (C) CO2 (D) N2

Last Answer : (B) CH4

The essential ingredient of all the synthesis gas is (A) H2 (B) O2 (C) CO2 (D) N2

Description : The essential ingredient of all the synthesis gas is (A) H2 (B) O2 (C) CO2 (D) N2

Last Answer : (A) H

Green house gases blanket/block the infrared radiation from earth's surface to the atmosphere leading to its progressive warming up. Which of the following gases does not exhibit green house effect? (A) CO2 (B) H2 (C) SO3 (D) N2

Description : Green house gases blanket/block the infrared radiation from earth's surface to the atmosphere leading to its progressive warming up. Which of the following gases does not exhibit green house effect? (A) CO2 (B) H2 (C) SO3 (D) N2

Last Answer : (C) SO3

__________ gas is normally employed in B.E.T. method of finding out the surface area of catalyst. (A) N2 (B) H2(C) CO2(D) He

Description : __________ gas is normally employed in B.E.T. method of finding out the surface area of catalyst. (A) N2 (B) H2 (C) CO2 (D) He

Last Answer : (A) N2

Leguminous plants are able to fix atmospheric nitrogen through the process of symbiotic nitrogen fixation. Which one of the following statements is not correct during this process of nitrogen fixation? (a) Leghaemoglobin scavenges oxygen and is pinkish in colour. (b) Nodules act as sites for nitrogen fixation. (c) The enzyme nitrogenase catalyses the conversion of atmospheric N2 to NH3. (d) Nitrogenase is insensitive to oxygen.

Description : Leguminous plants are able to fix atmospheric nitrogen through the process of symbiotic nitrogen fixation. Which one of the following statements is not correct during this process of nitrogen fixation ... the conversion of atmospheric N2 to NH3. (d) Nitrogenase is insensitive to oxygen.

Last Answer : (d) Nitrogenase is insensitive to oxygen.

The reaction, C + CO2 ↔ 2CO, taking place during coal gasification is called the __________ reaction. (A) Neumann reversal (B) Shift conversion (C) Boudouard (D) Reduction

Description : The reaction, C + CO2 ↔ 2CO, taking place during coal gasification is called the __________ reaction. (A) Neumann reversal (B) Shift conversion (C) Boudouard (D) Reduction

Last Answer : (C) Boudouard

All gases during throttling process at atmospheric temperature and pressure show a cooling effect except (A) CO2 (B) H2 (C) O2 (D) N2

Description : All gases during throttling process at atmospheric temperature and pressure show a cooling effect except (A) CO2 (B) H2 (C) O2 (D) N2

Last Answer : (B) H2

Which of the following reactions occuring during coal gasification is called the Neumann reversal reaction? (A) 2CO ↔ C + CO2 (B) CO + H2O ↔ CO2 + H2 (C) C + H2O ↔ CO + H2 (D) C + 2H2O ↔ CO2 + 2H2

Description : Which of the following reactions occuring during coal gasification is called the Neumann reversal reaction? (A) 2CO ↔ C + CO2 (B) CO + H2O ↔ CO2 + H2 (C) C + H2O ↔ CO + H2 (D) C + 2H2O ↔ CO2 + 2H2

Last Answer : (A) 2CO ↔ C + CO2

Given, 3H2 + CO = CH4 + H2O, KP = 10 1.84 and, 4H2 + CO2 = CH4 + 2H2O, KP = 10 1.17 the KP for the reaction CO + H2O = CO2 + H2 is (A) 10 3.01 (B) 10 -0.67 (C) 10 -3.01 (D) 10 0.67

Description : Given, 3H2 + CO = CH4 + H2O, KP = 10 1.84 and, 4H2 + CO2 = CH4 + 2H2O, KP = 10 1.17 the KP for the reaction CO + H2O = CO2 + H2 is (A) 10 3.01 (B) 10 -0.67 (C) 10 -3.01 (D) 10 0.67

Last Answer : (D) 10 0.67

An increase in the NH3 /CO2 ratio in urea manufacture results in (A) Increased degree of conversion of CO2 to urea (B) Decreased degree of conversion of NH3 to urea (C) Decreased yield of urea (D) Decreased specific volume of molten mass

Description : An increase in the NH3 /CO2 ratio in urea manufacture results in (A) Increased degree of conversion of CO2 to urea (B) Decreased degree of conversion of NH3 to urea (C) Decreased yield of urea (D) Decreased specific volume of molten mass

Last Answer : (A) Increased degree of conversion of CO2 to urea

Protective gas used in the annealing furnace for steel coil comprises of (A) 95% N2 + 5% H2 (B) 5% H2 + 9% N2 (C) 100% CO (D) 100% H2

Description : Protective gas used in the annealing furnace for steel coil comprises of (A) 95% N2 + 5% H2 (B) 5% H2 + 9% N2 (C) 100% CO (D) 100% H2

Last Answer : (A) 95% N2 + 5% H2

Largest constituent of coke oven gas is (A) N2 (B) H2 (C) CH4 (D) CO

Description : Largest constituent of coke oven gas is (A) N2 (B) H2 (C) CH4 (D) CO

Last Answer : (B) H2

The ammonia synthesis reaction represented by N2 + 3H2 ⇌ 2NH3; ΔH = - 22.4 kcal, is (A) Endothermic (B) Exothermic (C) Isothermal (D) Adiabatic

Description : The ammonia synthesis reaction represented by N2 + 3H2 ⇌ 2NH3; ΔH = - 22.4 kcal, is (A) Endothermic (B) Exothermic (C) Isothermal (D) Adiabatic

Last Answer : (B) Exothermic

When steam is passed over coal resulting in the endothermic reaction represent by, C + H2O = CO + H2 , it is called the __________ of coal. (A) Carbonisation (B) Oxidation (C) Coalification (D) Gasification

Description : When steam is passed over coal resulting in the endothermic reaction represent by, C + H2O = CO + H2 , it is called the __________ of coal. (A) Carbonisation (B) Oxidation (C) Coalification (D) Gasification

Last Answer : (D) Gasification

In the ammonia synthesis reaction, N2 + 3H2 ⇌ 2NH3 + 22.4 kcal, the formation of NH3 will be favoured by (A) High temperature (B) Low pressure (C) Low temperature only (D) Both low temperature and high pressure

Description : In the ammonia synthesis reaction, N2 + 3H2 ⇌ 2NH3 + 22.4 kcal, the formation of NH3 will be favoured by (A) High temperature (B) Low pressure (C) Low temperature only (D) Both low temperature and high pressure

Last Answer : (D) Both low temperature and high pressure

Combustion reaction of fuels is a/an __________ reaction. (A) Auto catalytic (B) Exothermic (C) Endothermic (D) None of these

Description : Combustion reaction of fuels is a/an __________ reaction. (A) Auto catalytic (B) Exothermic (C) Endothermic (D) None of these

Last Answer : (B) Exothermic

Dehydration of ammonium carbamate to yield urea is a/an __________ reaction. (A) Exothermic (B) Endothermic (C) Autocatalytic (D) Catalytic

Description : Dehydration of ammonium carbamate to yield urea is a/an __________ reaction. (A) Exothermic (B) Endothermic (C) Autocatalytic (D) Catalytic

Last Answer : (B) Endothermic