For organic compounds, group contribution method can be used for the estimation of (A) Critical properties (B) Specific gravity (C) Specific volume (D) Thermal conductivity

For organic compounds, group contribution method can be used for the estimation of
(A) Critical properties
(B) Specific gravity
(C) Specific volume
(D) Thermal conductivity
by

1 Answer

Answer :

(A) Critical properties
by

Related questions

Velocity of liquid hydrocarbon fuels in a pipeline cannot be measured by magnetic flow-meters, because their __________ is very low/small. (A) Thermal conductivity (B) Electrical conductivity (C) Specific gravity

Description : Velocity of liquid hydrocarbon fuels in a pipeline cannot be measured by magnetic flow-meters, because their __________ is very low/small. (A) Thermal conductivity (B) Electrical conductivity (C) Specific gravity

Last Answer : (C) Specific gravity

An approximate estimation of total dissolved solids of a given water sample is often made by measuring (a) Electrical conductivity of the water sample (b) Electro-magnetic conductivity of the water sample (c) Sound conductivity of the water sample (d) Thermal conductivity of the water sample

Description : An approximate estimation of total dissolved solids of a given water sample is often made by measuring (a) Electrical conductivity of the water sample (b) Electro-magnetic conductivity of the water sample (c) Sound conductivity of the water sample (d) Thermal conductivity of the water sample

Last Answer : (a) Electrical conductivity of the water sample

The critical radius of insulation for a spherical shell is (where, K = thermal conductivity of insulating material h0 = heat transfer coefficient at the outer surface) (A) K/h0 (B) 2K/h0 (C) h0 /K (D) h0 /2K

Description : The critical radius of insulation for a spherical shell is (where, K = thermal conductivity of insulating material h0 = heat transfer coefficient at the outer surface) (A) K/h0 (B) 2K/h0 (C) h0 /K (D) h0 /2K

Last Answer : (B) 2K/h0

What is the critical radius of insulation (cms) for a metallic cylinder, if the convective heat transfer co-efficient with the ambient atmosphere is 5 W/m2. °K? Thermal conductivity of metal and insulation material are 40 and 0.1 W/m.°K respectively. (A) 2 (B) 8 (C) 10 (D) 40

Description : What is the critical radius of insulation (cms) for a metallic cylinder, if the convective heat transfer co-efficient with the ambient atmosphere is 5 W/m2. °K? Thermal conductivity of metal and insulation material are 40 and 0.1 W/m.°K respectively. (A) 2 (B) 8 (C) 10 (D) 40

Last Answer : (A) 2

Pick out the wrong statement. (A) Higher specific gravity of petroleum products means higher C/H ratio (B) Aromatics have lower specific gravity than corresponding paraffins (C) Hydrocarbons of low specific gravity (e.g., paraffins) possess the maximum thermal energy per unit volume (D) Hydrocarbons of high specific gravity (e.g., aromatics) possess the maximum thermal energy per unit weight

Description : Pick out the wrong statement. (A) Higher specific gravity of petroleum products means higher C/H ratio (B) Aromatics have lower specific gravity than corresponding paraffins (C) Hydrocarbons of low ... of high specific gravity (e.g., aromatics) possess the maximum thermal energy per unit weight

Last Answer : (B) Aromatics have lower specific gravity than corresponding paraffins

Pick out the wrong statement. (A) Bubble size increases with the dynamic viscosity of the liquid in case of nucleate pool boiling (B) Thermal conductivity of a dry material is more than that of the damp material (C) Ratio of its capacity to economy equals the steam consumption in kg/hr in an evaporator (D) Vaporisation of organic substances in evaporator mostly causes foam formation

Description : Pick out the wrong statement. (A) Bubble size increases with the dynamic viscosity of the liquid in case of nucleate pool boiling (B) Thermal conductivity of a dry material is more than ... in kg/hr in an evaporator (D) Vaporisation of organic substances in evaporator mostly causes foam formation

Last Answer : (B) Thermal conductivity of a dry material is more than that of the damp material

Psychrometry deals with the properties of gas-vapor mixture. Humidity can be determined by the measurement of the __________ of a fibre. (A) Electrical resistance (B) Thermal conductivity (C) Strength (D) None of these

Description : Psychrometry deals with the properties of gas-vapor mixture. Humidity can be determined by the measurement of the __________ of a fibre. (A) Electrical resistance (B) Thermal conductivity (C) Strength (D) None of these

Last Answer : (A) Electrical resistance

. Which of the following is empirical estimation techniqueD. All of the above? (i) expert judgement (ii) Delphi estimation (iii) COCOMO (iv) Critical path Method A. only i, ii & iii B. only i & ii C. only i, iii & iv

Description : . Which of the following is empirical estimation technique? (i) expert judgement (ii) Delphi estimation (iii) COCOMO (iv) Critical path Method A. only i, ii & iii B. only i & ii C. only i, iii & iv D. All of the above

Last Answer : B. only i & ii

Which of the following properties is not necessarily desirable in the material for transformer core? A. Mechanical strength B. Low hysteresis loss C. High thermal conductivity D. High permeability

Description : Which of the following properties is not necessarily desirable in the material for transformer core? A. Mechanical strength B. Low hysteresis loss C. High thermal conductivity D. High permeability

Last Answer : C) high thermal conductivity

Refractory metals are known for which of the following properties: w) lack of chemical reactivity x) low density y) high melting point z) high thermal conductivity

Description : Refractory metals are known for which of the following properties: w) lack of chemical reactivity x) low density y) high melting point z) high thermal conductivity

Last Answer : ANSWER: Y -- HIGH MELTING POINT

Thermal conductivity of a material does not depend upon its (A) Mass (B) Volume (C) Surface area (D) All 'a', 'b' & 'c'

Description : Thermal conductivity of a material does not depend upon its (A) Mass (B) Volume (C) Surface area (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Low thermal conductivity of heat insulating materials is due to its (A) Dense structure (B) High proportion of air space (C) High specific heat (D) None of these

Description : Low thermal conductivity of heat insulating materials is due to its (A) Dense structure (B) High proportion of air space (C) High specific heat (D) None of these

Last Answer : (B) High proportion of air space

Heat required to raise the temperature of a body by 1 °C is called its (A) Heat capacity (B) Specific heat capacity (C) Thermal conductivity (D) Water equivalent

Description : Heat required to raise the temperature of a body by 1 °C is called its (A) Heat capacity (B) Specific heat capacity (C) Thermal conductivity (D) Water equivalent

Last Answer : (A) Heat capacity

For the estimation of nitrogen, 1.4 g of an organic compound was digested by Kjeldahl method and the evolved ammonia acid absorbed in 60 mL of `M/10`

Description : For the estimation of nitrogen, 1.4 g of an organic compound was digested by Kjeldahl method and the evolved ammonia acid absorbed in 60 mL of `M/10`

Last Answer : For the estimation of nitrogen, 1.4 g of an organic compound was digested by Kjeldahl method and the evolved ammonia ... ` B. `10%` C. `3%` D. `5%`

In Dumas’ method for estimation of nitrogen, 0.3g of an organic compound gave 50mL of nitrogen collected at 300K temperature and 715mm pressure. Calculate the percentage composition of nitrogen in the compound. (Aqueous tension at 300K=15 mm).

Description : In Dumas’ method for estimation of nitrogen, 0.3g of an organic compound gave 50mL of nitrogen collected at 300K temperature and 715mm pressure. Calculate the percentage composition of nitrogen in the compound. (Aqueous tension at 300K=15 mm).

Last Answer : Volume of nitrogen collected at 300K and 715mm pressure is 50 mL Actual pressure = 715-15 =700 mm Volume of Nitrogen at STP=273*700*50/300*760 =41.9 ml 22400 ml of Nitrogen at STP weighs = 28 g 41.9 ml of Nitrogen weighs = 28*41.9/22400 g % of Nitrogen = 28*41.9*100/22400*0.3 = 17.45 %

In an estimation of sulphur by carius method 0.468 g of an organic compound gave 0.668 g of barium sulphate. Find the percentage of sulphur in the compound.

Description : In an estimation of sulphur by carius method 0.468 g of an organic compound gave 0.668 g of barium sulphate. Find the percentage of sulphur in the compound.

Last Answer : Mass of the compound = 0.468 g Mass of the barium sulphate = 0.668 g % of sulphur = 32 X Mass of barium sulphate X 100/ 233 X Mass of the compound = 32 x 0.668x100/ 233 x0.468 = 19.60 %

What is the principle of Dumas method for the estimation of N in the organic compound?

Description : What is the principle of Dumas method for the estimation of N in the organic compound?

Last Answer : In Dumas method , Nitrogen present in organic compound on heating with CuO release free nitrogen gas ,which collected by the downword displacement of KOH. From the voiume of nitrogen gas collected at STP, Nitrogen could be estimated.

Which of the following is an undesirable property of slag produced during the Pyrometallurgical method of metal extraction from its ore? (A) High fusibility & fluidity (B) High thermal conductivity (C) Low density (D) High chemical activity

Description : Which of the following is an undesirable property of slag produced during the Pyrometallurgical method of metal extraction from its ore? (A) High fusibility & fluidity (B) High thermal conductivity (C) Low density (D) High chemical activity

Last Answer : B) High thermal conductivity

Which of the following criterion is used for any metal to be used as a cooking material? (1) More specific heat (2) More thermal conductivity (3) Less thermal conductivity (4) Less electrical conductivity

Description : Which of the following criterion is used for any metal to be used as a cooking material? (1) More specific heat (2) More thermal conductivity (3) Less thermal conductivity (4) Less electrical conductivity

Last Answer : (3) Less thermal conductivity Explanation: A metal to be used as a cooking material should have less thermal conductivity.

What is a measure of the ability of a material to conduct heat?  A. Specific heat capacity  B. Coefficient of thermal expansion  C. Coefficient of thermal conductivity  D. Thermal conductivity

Description : What is a measure of the ability of a material to conduct heat?  A. Specific heat capacity  B. Coefficient of thermal expansion  C. Coefficient of thermal conductivity  D. Thermal conductivity

Last Answer : Thermal conductivity

Which of the following criterion is used for any metal to be used as a cooking material ? (1) More specific heat (2) More thermal conductivity (3) Less thermal conductivity (4) Less electrical conductivity

Description : Which of the following criterion is used for any metal to be used as a cooking material ? (1) More specific heat (2) More thermal conductivity (3) Less thermal conductivity (4) Less electrical conductivity

Last Answer : Less thermal conductivity 

Increase in the specific gravity of petroleum products indicates (A) Decrease in paraffin content (B) Increase in thermal energy per unit weight

Description : Increase in the specific gravity of petroleum products indicates (A) Decrease in paraffin content (B) Increase in thermal energy per unit weight

Last Answer : (A) Decrease in paraffin content

A molecule is (a) A class of organic compounds (b) The smallest unit of a substance that retains the properties of the substance (c) The spectrum of a substance (d) A small mass

Description : A molecule is (a) A class of organic compounds (b) The smallest unit of a substance that retains the properties of the substance (c) The spectrum of a substance (d) A small mass

Last Answer : Ans:(b)

Lane and Garton classification of petroleum is based on its (A) Composition (B) Specific gravity (C) Optical properties (D) Viscosity

Description : Lane and Garton classification of petroleum is based on its (A) Composition (B) Specific gravity (C) Optical properties (D) Viscosity

Last Answer : (B) Specific gravity

Which of the following properties of a fluid is responsible for offering resistance to shear? (A) Surface tension (B) Viscosity (C) Specific gravity (D) All (A), (B), and (C)

Description : Which of the following properties of a fluid is responsible for offering resistance to shear? (A) Surface tension (B) Viscosity (C) Specific gravity (D) All (A), (B), and (C)

Last Answer : (B) Viscosity

For aluminium, as compared to copper, all the following factors have higher values except (a) specific volume (6) electrical conductivity (c) co-efficient of linear expansion (d) resistance per unit length for same cross-section

Description : For aluminium, as compared to copper, all the following factors have higher values except (a) specific volume (6) electrical conductivity (c) co-efficient of linear expansion (d) resistance per unit length for same cross-section

Last Answer : (6) electrical conductivity

Pick up the correct statement from the following: (A) The phenomenon of quicksand generally occurs in the cohesionless soil (B) At critical hydraulic gradient, the saturated sand becomes quick (C) The critical gradient depends on the void ratio and the specific gravity (D) All the above

Description : Pick up the correct statement from the following: (A) The phenomenon of quicksand generally occurs in the cohesionless soil (B) At critical hydraulic gradient, the saturated sand becomes quick (C) The critical gradient depends on the void ratio and the specific gravity (D) All the above

Last Answer : (D) All the above

The critical exist gradient of seepage water in soils, is (A) Directly proportional to the voids ratio (B) Inversely proportional to the specific gravity (C) Directly proportional to the specific gravity (D) None of these

Description : The critical exist gradient of seepage water in soils, is (A) Directly proportional to the voids ratio (B) Inversely proportional to the specific gravity (C) Directly proportional to the specific gravity (D) None of these

Last Answer : (D) None of these

A coarse-grained soil has a voids ratio 0.75, and specific gravity as 2.75. The critical gradient at which quick sand condition occurs, is (A) 0.25 (B) 0.50 (C) 0.75 (D) 1.00

Description : A coarse-grained soil has a voids ratio 0.75, and specific gravity as 2.75. The critical gradient at which quick sand condition occurs, is (A) 0.25 (B) 0.50 (C) 0.75 (D) 1.00

Last Answer : (D) 1.00

The critical exist gradient of seepage water in soils, increases with (A) An increase in specific gravity (B) A decrease in specific gravity (C) A decrease in void ratio (D) Both (a) and (c)

Description : The critical exist gradient of seepage water in soils, increases with (A) An increase in specific gravity (B) A decrease in specific gravity (C) A decrease in void ratio (D) Both (a) and (c)

Last Answer : Answer: Option D

The porosity of a certain soil sample was found to be 80% and its specific gravity was 2:7; the critical hydraulic gradient will be estimated as (a) 0.34 (b) 0.92 (c) 1.0 (d) 1.5

Description : The porosity of a certain soil sample was found to be 80% and its specific gravity was 2:7; the critical hydraulic gradient will be estimated as (a) 0.34 (b) 0.92 (c) 1.0 (d) 1.5

Last Answer : (a) 0.34

A bar chart is commonly used because (a) It is simple to draw and easy to understand (b) It indicates at a glance the overall progress of the project (c) It shows critical and non-critical activities (d) It incorporates uncertainties for delay in estimation of time required for completion of activities.

Description : A bar chart is commonly used because (a) It is simple to draw and easy to understand (b) It indicates at a glance the overall progress of the project (c) It shows critical ... critical activities (d) It incorporates uncertainties for delay in estimation of time required for completion of activities.

Last Answer : (a) It is simple to draw and easy to understand

A sewer pipe contains 1 mm sand particles of specific gravity 2.65 and 5 mm organic particles of specific gravity 1.2, the minimum velocity required for removing the sewerage, is A. 0.30 m/sec B. 0.35 m/sec C. 0.40 m/sec D. 0.45 m/sec

Description : A sewer pipe contains 1 mm sand particles of specific gravity 2.65 and 5 mm organic particles of specific gravity 1.2, the minimum velocity required for removing the sewerage, is A. 0.30 m/sec B. 0.35 m/sec C. 0.40 m/sec D. 0.45 m/sec

Last Answer : ANS: D

An organic liquid will generally have a specific gravity? w) equal to that of water x) less than that of water y) greater than that of water

Description : An organic liquid will generally have a specific gravity? w) equal to that of water x) less than that of water y) greater than that of water

Last Answer : ANSWER: X -- LESS THAN THAT OF WATER

0.3780g of organic chloro compound gave 0.5740g of silver chloride in carius estimation .Calculate the percentage of chlorine present in the compound.

Description : 0.3780g of organic chloro compound gave 0.5740g of silver chloride in carius estimation .Calculate the percentage of chlorine present in the compound.

Last Answer : % of chlorine = 35.5*mass of AgCl formed * 100/143.5 * mass of the substance = 35.5*0.5740*100/143.5*0.3780 = 19.6 %

Materials for rain-proof coats and tents owe their water proof properties to _____? A. Surface tension B. Viscosity C. Elasticity D. Specific gravity

Description : Materials for rain-proof coats and tents owe their water proof properties to _____? A. Surface tension B. Viscosity C. Elasticity D. Specific gravity

Last Answer : ANSWER: A

Materials for rain proof coats and tents owe their water proof properties to – (1) Surface tension (2) Viscosity (3) Specific gravity (4) Elasticity

Description : Materials for rain proof coats and tents owe their water proof properties to – (1) Surface tension (2) Viscosity (3) Specific gravity (4) Elasticity

Last Answer : (1) Surface tension Explanation: Materials for rain proof coats and tents owe their water proof properties to Surface Tension. The surface of a liquid behaves like an elastic membrane and therefore, has a tendency to contract. This property of liquid is called Surface Tension.

Material for rain-proof coats and tents owe their water proof properties to ----? A. Surface tension (Answer) B. Viscosity C. Specific gravity D. Elasticity

Description : Material for rain-proof coats and tents owe their water proof properties to ----? A. Surface tension (Answer) B. Viscosity C. Specific gravity D. Elasticity

Last Answer : A. Surface tension (Answer)

Materials for rain proof coats and tents owe their water proof properties to (1) Surface tension (2) Viscosity (3) Specific gravity (4) Elasticity

Description : Materials for rain proof coats and tents owe their water proof properties to (1) Surface tension (2) Viscosity (3) Specific gravity (4) Elasticity

Last Answer : Surface tension

Pick out the wrong statement. (A) Aromatics have higher specific gravity than paraffins (B) Gross calorific value (GCV) of petrofuels is equal to (12400 - 2100 ρ 2 ) where, ρ is the specific gravity of the fuel at 15.5°C (C) Heavier petrofuels have higher GCV on weight basis (i.e., Kcal/kg) but lower GCV on volume basis (i.e., Kcal/litre) (D) Higher specific gravity of petrofuels means higher C/H ratio

Description : Pick out the wrong statement. (A) Aromatics have higher specific gravity than paraffins (B) Gross calorific value (GCV) of petrofuels is equal to (12400 - 2100 ρ 2 ) where, ρ is the specific gravity ... volume basis (i.e., Kcal/litre) (D) Higher specific gravity of petrofuels means higher C/H ratio

Last Answer : (C) Heavier petrofuels have higher GCV on weight basis (i.e., Kcal/kg) but lower GCV on volume basis (i.e., Kcal/litre)

(1/V) (∂V/∂T)Pis the mathematical expression (A) Joule-Thomson co-efficient (B) Specific heat at constant pressure (Cp) (C) co-efficient of thermal expansion (D) Specific heat at constant volume (CV)

Description : (1/V) (∂V/∂T)Pis the mathematical expression (A) Joule-Thomson co-efficient (B) Specific heat at constant pressure (Cp) (C) co-efficient of thermal expansion (D) Specific heat at constant volume (CV)

Last Answer : (C) co-efficient of thermal expansion

Extensive properties of a thermodynamic system depend upon the __________ of the system. (A) Specific volume (B) Temperature (C) Mass (D) Pressure

Description : Extensive properties of a thermodynamic system depend upon the __________ of the system. (A) Specific volume (B) Temperature (C) Mass (D) Pressure

Last Answer : (C) Mass

Power consumption during turbulent flow in agitation tank is proportional to the __________ of the liquid. (A) Viscosity (B) Thermal conductivity(C) Surface tension(D) Density

Description : Power consumption during turbulent flow in agitation tank is proportional to the __________ of the liquid. (A) Viscosity (B) Thermal conductivity (C) Surface tension (D) Density

Last Answer : (D) Density

Copper has very low (A) Malleability (B) Ductility (C) Tensile strength (D) Thermal & electrical conductivity

Description : Copper has very low (A) Malleability (B) Ductility (C) Tensile strength (D) Thermal & electrical conductivity

Last Answer : (C) Tensile strength

Coke oven regenerators are made of __________ bricks. (A) Fire clay (B) Silica (C) Low thermal conductivity (D) High electrical conductivity

Description : Coke oven regenerators are made of __________ bricks. (A) Fire clay (B) Silica (C) Low thermal conductivity (D) High electrical conductivity

Last Answer : (A) Fire clay

A bearing metal should not have (A) Enough plasticity (B) Low thermal conductivity (C) Low co-efficient of friction (D) High toughness

Description : A bearing metal should not have (A) Enough plasticity (B) Low thermal conductivity (C) Low co-efficient of friction (D) High toughness

Last Answer : (B) Low thermal conductivity

Coke oven walls are lined with __________ bricks. (A) Silica (B) Tar-dolomite (C) Low thermal conductivity (D) Fire clay

Description : Coke oven walls are lined with __________ bricks. (A) Silica (B) Tar-dolomite (C) Low thermal conductivity (D) Fire clay

Last Answer : (A) Silica

Brass tubes are used in the manufacture of tubes of evaporators used in sugar and salt industries, mainly because of its (A) High co-efficient of thermal expansion (B) Low thermal conductivity (C) High corrosion resistance (D) All (A), (B) and (C)

Description : Brass tubes are used in the manufacture of tubes of evaporators used in sugar and salt industries, mainly because of its (A) High co-efficient of thermal expansion (B) Low thermal conductivity (C) High corrosion resistance (D) All (A), (B) and (C)

Last Answer : (C) High corrosion resistance

Tin base and lead base alloys are used for bearing materials. Tin compared to lead has lower (A) Price (B) Corrosion resistance (C) Thermal conductivity (D) Abundant availability

Description : Tin base and lead base alloys are used for bearing materials. Tin compared to lead has lower (A) Price (B) Corrosion resistance (C) Thermal conductivity (D) Abundant availability

Last Answer : (D) Abundant availability

Pick out the wrong statement. (A) Pure rubber is as useless as pure gold as a material of construction (B) Thermal conductivity of aluminium is higher than that of copper; henceit is increasingly used for utensil making(C) Copper has poor weldability(D) Reinforced plastics are made from both thermoplastic as well asthermosetting plastics

Description : Pick out the wrong statement. (A) Pure rubber is as useless as pure gold as a material of construction (B) Thermal conductivity of aluminium is higher than that of copper; henceit is ... has poor weldability (D) Reinforced plastics are made from both thermoplastic as well as thermosetting plastics

Last Answer : (B) Thermal conductivity of aluminium is higher than that of copper; henceit is increasingly used for utensil making