The ratio of settlement at any time 't' to the final settlement, is known as (A) Co-efficient of consolidation (B) Degree of consolidation (C) Consolidation index (D) Consolidation of undisturbed soil

The ratio of settlement at any time 't' to the final settlement, is known as
(A) Co-efficient of consolidation
(B) Degree of consolidation
(C) Consolidation index
(D) Consolidation of undisturbed soil
by

1 Answer

Answer :

(B) Degree of consolidation
by

Related questions

The ultimate consolidation settlement of a soil is (A) Directly proportional to the voids ratio (B) Directly proportional to the compression index (C) Inversely proportional to the compression index (D) None of the above

Description : The ultimate consolidation settlement of a soil is (A) Directly proportional to the voids ratio (B) Directly proportional to the compression index (C) Inversely proportional to the compression index (D) None of the above

Last Answer : (B) Directly proportional to the compression index

Pick up the correct statement from the following: (A) The property of a soil that enables it to become stiff in a relatively short time on standing is called thixotropy (B) The ratio of shear strength in natural state to the remoulded shear strength under undrained conditions is called degree of sensitivity (C) The difference between the undisturbed shear strength and remoulded shear strength is known remoulding loss (D) All the above

Description : Pick up the correct statement from the following: (A) The property of a soil that enables it to become stiff in a relatively short time on standing is called thixotropy (B) The ratio ... the undisturbed shear strength and remoulded shear strength is known remoulding loss (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) Coefficient of compressibility is the decrease in void ratio per unit increase of pressure (B) The percent settlement at any time is called degree of consolidation (C) Time factor is a dimensionless quantity (D) All the above

Description : Pick up the correct statement from the following: (A) Coefficient of compressibility is the decrease in void ratio per unit increase of pressure (B) The percent settlement at any time is called degree of consolidation (C) Time factor is a dimensionless quantity (D) All the above

Last Answer : Answer: Option D

The ultimate consolidation settlement of a structure resting on a soil (A) Decreases with the increase in the initial voids ratio (B) Decreases with the decrease in the plastic limit (C) Increases with the increase in the initial voids ratio (D) Increases with the decrease in the porosity of the soil

Description : The ultimate consolidation settlement of a structure resting on a soil (A) Decreases with the increase in the initial voids ratio (B) Decreases with the decrease in the plastic limit (C) Increases ... increase in the initial voids ratio (D) Increases with the decrease in the porosity of the soil

Last Answer : Answer: Option A

Pick up the incorrect definition from the following: (A) Ratio of the compressive strength of unconfined undisturbed soil to that of remoulded soil, is known as the sensitivity of the soil sample (B) The rotation of soil particles into stable state while remoulding, is known as the thiostropy of soil (C) The water content at which a soil flows, is known plastic limit of the soil (D) None of these

Description : Pick up the incorrect definition from the following: (A) Ratio of the compressive strength of unconfined undisturbed soil to that of remoulded soil, is known as the sensitivity of the soil sample (B) The ... content at which a soil flows, is known plastic limit of the soil (D) None of these

Last Answer : Answer: Option D

In clay soil (A) Swelling and shrinkage characteristics prevail (B) Consolidation continues even after several years of construction (C) Differential settlement is generally prevalent (D) All the above

Description : In clay soil (A) Swelling and shrinkage characteristics prevail (B) Consolidation continues even after several years of construction (C) Differential settlement is generally prevalent (D) All the above

Last Answer : Answer: Option D

Sensitivity of a soil can be defined as (A) Percentage of volume change of soil under saturated condition (B) Ratio of compressive strength of unconfined undisturbed soil to that of soil in a remoulded state (C) Ratio of volume of voids to volume of solids (D) None of the above

Description : Sensitivity of a soil can be defined as (A) Percentage of volume change of soil under saturated condition (B) Ratio of compressive strength of unconfined undisturbed soil to that of soil in a remoulded state (C) Ratio of volume of voids to volume of solids (D) None of the above

Last Answer : Answer: Option B

08. The ratio of velocity of fluid in an undisturbed stream to the velocity of sound wave is known as Mach number. A) Yes B) No

Description : 08. The ratio of velocity of fluid in an undisturbed stream to the velocity of sound wave is known as Mach number. A) Yes B) No

Last Answer : A

Settlement due to creep in soils is contingent on : (a) Primary consolidation (b) Secondary consolidation (c) Initial settlement (d) Compaction settlement

Description : Settlement due to creep in soils is contingent on : (a) Primary consolidation (b) Secondary consolidation (c) Initial settlement (d) Compaction settlement

Last Answer : (b) Secondary consolidation

If Cv is the coefficient of consolidation, is the time and is drainage path of one dimensional consolidation of soil, the time factor Tv, is given by (A) Tv = d²/Cv t (B) Tv = t²/d²Cv (C) Tv = Cv3 /d²t (D) Tv = Cv t/dt

Description : If Cv is the coefficient of consolidation, is the time and is drainage path of one dimensional consolidation of soil, the time factor Tv, is given by (A) Tv = d²/Cv t (B) Tv = t²/d²Cv (C) Tv = Cv3 /d²t (D) Tv = Cv t/dt

Last Answer : Answer: Option D

Consider the following statements: 1. For a saturated soil, Skempton’s B-parameter is nearly equal to unity. 2. For an undisturbed sensitive clay, the stress-strain curve shows a peak. 3. Interlocking contributes significantly to the shearing strength in case of dense sand. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. For a saturated soil, Skempton's B-parameter is nearly equal to unity. 2. For an undisturbed sensitive clay, the stress-strain curve shows a peak. 3. Interlocking contributes significantly to the shearing ... 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (a) 1, 2 & 3

The ultimate Settlement of a soil is directly proportional to: (A) Depth of the compressible soil strata (B) Compressive index (C) Both (a) and (b) (D) None of these

Description : The ultimate Settlement of a soil is directly proportional to: (A) Depth of the compressible soil strata (B) Compressive index (C) Both (a) and (b) (D) None of these

Last Answer : (D) None of these

The ratio of the difference between the void ratio of the soil in its loosest state and its natural void ratio (e) to the difference between the void ratios in the loosest and fully dense state, is generally termed as (A) Degree of density (B) Relativity (C) Density index (D) All the above

Description : The ratio of the difference between the void ratio of the soil in its loosest state and its natural void ratio (e) to the difference between the void ratios in the loosest and fully dense state, is generally termed as (A) Degree of density (B) Relativity (C) Density index (D) All the above

Last Answer : Answer: Option D

The co-efficient of performance (COP) of a refrigerating system, which is its index of performance, is defined as the ratio of useful refrigeration to the net work. The units of __________ and COP are the same. (A) Kinematic viscosity (B) Work (C) Temperature (D) None of these

Description : The co-efficient of performance (COP) of a refrigerating system, which is its index of performance, is defined as the ratio of useful refrigeration to the net work. The units of __________ and COP are the same. (A) Kinematic viscosity (B) Work (C) Temperature (D) None of these

Last Answer : (D) None of these

A type of loan, where the bank or the lending institution provides the borrower with a loan that helps the borrower to pay off his all previous debts is termed as ________ A. Debt Recovery B. Debt Settlement C. Debt Management D. Debt Consolidation

Description : A type of loan, where the bank or the lending institution provides the borrower with a loan that helps the borrower to pay off his all previous debts is termed as ________ A. Debt Recovery B. Debt Settlement C. Debt Management D. Debt Consolidation

Last Answer : D. Debt Consolidation Explanation: Debt consolidation is a form of debt refinancing that entails taking out one loan to pay off many others.

Degree of consolidation is (A) Directly proportional to time and inversely proportional to drainage path (B) Directly proportional to time and inversely proportional to square of drainage path (C) Directly proportional to drainage path and inversely proportional to time (D) Directly proportional to square of drainage path and inversely proportional to time

Description : Degree of consolidation is (A) Directly proportional to time and inversely proportional to drainage path (B) Directly proportional to time and inversely proportional to square of drainage path (C ... to time (D) Directly proportional to square of drainage path and inversely proportional to time

Last Answer : Answer: Option B

Consider the following statements: 1. Mathematically speaking, the time taken for 100% consolidation is infinite. 2. The time factor for a particular average degree of consolidation depends upon the distribution of initial excess hydrostatic pressure. 3. Secondary consolidation obeys Terzaghi’s one-dimensional theory of consolidation. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. Mathematically speaking, the time taken for 100% consolidation is infinite. 2. The time factor for a particular average degree of consolidation depends upon the distribution of initial excess hydrostatic ... 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (b) 1 & 2 only

The coefficient of compressibility of soil, is the ratio of (A) Stress to strain (B) Strain to stress (C) Stress to settlement (D) Rate of loading to that of settlement

Description : The coefficient of compressibility of soil, is the ratio of (A) Stress to strain (B) Strain to stress (C) Stress to settlement (D) Rate of loading to that of settlement

Last Answer : Answer: Option B

If W is the weight of a vehicle negotiating an upgrade 1 : S along a track having co-efficient of T is given by (A) T = p / ( + S) (B) p = T / ( + S) (C) S = p / ( + T) (D) = p / (T + S)

Description : If W is the weight of a vehicle negotiating an upgrade 1 : S along a track having co-efficient of T is given by (A) T = p / ( + S) (B) p = T / ( + S) (C) S = p / ( + T) (D) = p / (T + S)

Last Answer : Answer: Option D

The reduction in volume of soil due to squeezing out of water from the voids, is termed (A) Primary consolidation (B) Primary compression (C) Primary time effect (D) All the above

Description : The reduction in volume of soil due to squeezing out of water from the voids, is termed (A) Primary consolidation (B) Primary compression (C) Primary time effect (D) All the above

Last Answer : Answer: Option D

The consolidation time for soils (A) Increases with increasing compressibility (B) Decreases with increasing permeability (C) Increases rapidly with increasing size of soil mass (D) All the above

Description : The consolidation time for soils (A) Increases with increasing compressibility (B) Decreases with increasing permeability (C) Increases rapidly with increasing size of soil mass (D) All the above

Last Answer : Answer: Option D

Coefficient of consolidation of a soil is affected by (A) Compressibility (B) Permeability (C) Both compressibility and permeability (D) None of the above

Description : Coefficient of consolidation of a soil is affected by (A) Compressibility (B) Permeability (C) Both compressibility and permeability (D) None of the above

Last Answer : (C) Both compressibility and permeability

Coefficient of compressibility is (A) Constant for any type of soil (B) Different for different types of soils and also different for a soil under different states of consolidation (C) Different for different types of soils but same for a soil under different states of consolidation (D) Independent of type of soil but depends on the stress history of soil

Description : Coefficient of compressibility is (A) Constant for any type of soil (B) Different for different types of soils and also different for a soil under different states of consolidation (C) Different for ... of consolidation (D) Independent of type of soil but depends on the stress history of soil

Last Answer : Answer: Option B

During consolidation process of clayey soils, indicate the sequence of occurrence of the following events in the order from first to last : 1. Load being taken up by the pore water 2. Load being taken up by the soil grains 3. Drainage of water from the pores of the soil (a) 1, 2 and 3 (b) 2, 3 and 1 (c) 1, 3 and 2 (d) 2, 1 and 3

Description : During consolidation process of clayey soils, indicate the sequence of occurrence of the following events in the order from first to last : 1. Load being taken up by the pore water 2. Load being taken up by the soil grains 3. Drainage of ... 1, 2 and 3 (b) 2, 3 and 1 (c) 1, 3 and 2 (d) 2, 1 and 3

Last Answer : (c) 1, 3 and 2

The maximum value of effective stress in the past divided by the present value is defined as over consolidation ratio (OCR). The O.C.R. of an over consolidated clay is (A) Less than 1 (B) 1 (C) More than 1 (D) None of these

Description : The maximum value of effective stress in the past divided by the present value is defined as over consolidation ratio (OCR). The O.C.R. of an over consolidated clay is (A) Less than 1 (B) 1 (C) More than 1 (D) None of these

Last Answer : (C) More than 1

Which one of the following clays behaves like a dense sand? (A) Over-consolidated clay with a high over-consolidation ratio (B) Over-consolidated clay with a low over-consolidation ratio (C) Normally consolidated clay (D) Under-consolidated clay

Description : Which one of the following clays behaves like a dense sand? (A) Over-consolidated clay with a high over-consolidation ratio (B) Over-consolidated clay with a low over-consolidation ratio (C) Normally consolidated clay (D) Under-consolidated clay

Last Answer : Answer: Option A

Which of the following file organization is most efficient for a file with a high degree of file activity? A) Sequential B) ISAM C) VSAM D) B-Tree Index

Description : Which of the following file organization is most efficient for a file with a high degree of file activity? A) Sequential B) ISAM C) VSAM D) B-Tree Index

Last Answer : Answer : A

Which of the following file organization is most efficient for a file with a high degree of file activity? a. Sequential b. ISAM c. VSAM d. B-Tree Index

Description : Which of the following file organization is most efficient for a file with a high degree of file activity? a. Sequential b. ISAM c. VSAM d. B-Tree Index

Last Answer : Sequential

Which of the following file organization is most efficient for a file with a high degree of file activity? a. Sequential b. ISAM c. VSAM d. B-Tree Index

Description : Which of the following file organization is most efficient for a file with a high degree of file activity? a. Sequential b. ISAM c. VSAM d. B-Tree Index

Last Answer : a. Sequential

The ratio of the volume of water present in a given soil mass to the total volume of its voids, is known (A) Porosity (B) Void ratio (C) Percentage voids (D) Degree of saturation

Description : The ratio of the volume of water present in a given soil mass to the total volume of its voids, is known (A) Porosity (B) Void ratio (C) Percentage voids (D) Degree of saturation

Last Answer : Answer: Option D

The compression resulting from a long term static load and consequent escape of pore water, is known as (A) Compaction (B) Consolidation (C) Swelling (D) None of these

Description : The compression resulting from a long term static load and consequent escape of pore water, is known as (A) Compaction (B) Consolidation (C) Swelling (D) None of these

Last Answer : (B) Consolidation

When drainage is permitted under initially applied normal stress only and full primarily consolidation is allowed to take place, the test is known as (A) Quick test (B) Drained test (C) Consolidated undrained test (D) None of these

Description : When drainage is permitted under initially applied normal stress only and full primarily consolidation is allowed to take place, the test is known as (A) Quick test (B) Drained test (C) Consolidated undrained test (D) None of these

Last Answer : (C) Consolidated undrained test

If drainage is permitted throughout the test, during the application of both normal, and shear stresses so that full consolidation occurs and no excess pore pressure is set up at any stage of the test, is known as (A) Quick test (B) Drained test (C) Consolidated undrained test (D) None of these

Description : If drainage is permitted throughout the test, during the application of both normal, and shear stresses so that full consolidation occurs and no excess pore pressure is set up at any stage of the test, is ... (A) Quick test (B) Drained test (C) Consolidated undrained test (D) None of these

Last Answer : Answer: Option B

The consistency index of a soil is defined as the ratio of (A) Liquid limit plus the natural water content to the plasticity index of the soil (B) Liquid limit minus the natural water content to the plasticity index of the soil (C) Natural water content of a soil minus plastic limit to the plasticity index of the soil (D) Natural water content of a soil plus its plastic limit to the plasticity index of the soil

Description : The consistency index of a soil is defined as the ratio of (A) Liquid limit plus the natural water content to the plasticity index of the soil (B) Liquid limit minus the natural water content to ... (D) Natural water content of a soil plus its plastic limit to the plasticity index of the soil

Last Answer : Answer: Option B

If the natural moisture content, the liquid limit and plastic limit of a soil sample are stated as 30.5%, 42.5% and 22.5% respectively, the ratio of liquidity index and plastic index, is (A) (B) ½ (C) 2 (D) 2½

Description : If the natural moisture content, the liquid limit and plastic limit of a soil sample are stated as 30.5%, 42.5% and 22.5% respectively, the ratio of liquidity index and plastic index, is (A) (B) ½ (C) 2 (D) 2½

Last Answer : Answer: Option C

Walls of a cubical oven are of thickness l, and they are made of material of thermal conductivity k. The temperature inside the oven is 100°C and the inside heat transfer co-efficient is ‘3k/l’. If the wall temperature on the outside is held at 25°C, what is the inside wall temperature in degree centigrade?(A) 35.5 (B) 43.75 (C) 81.25 (D) 48.25

Description : Walls of a cubical oven are of thickness l, and they are made of material of thermal conductivity k. The temperature inside the oven is 100°C and the inside heat transfer co-efficient is 3k/l'. If the wall temperature ... wall temperature in degree centigrade? (A) 35.5 (B) 43.75 (C) 81.25 (D) 48.25

Last Answer : (C) 81.25

The importance of the correlation co-efficient lies in the fact that: (A) There is a linear relationship between the correlated variables. (B) It is one of the most valid measure of statistics. (C) It allows one to determine the degree or strength of the association be tween two variables. (D) It is a non-parametric method of statistical analysis.

Description : The importance of the correlation co-efficient lies in the fact that: (A) There is a linear relationship between the correlated variables. (B) It is one of the most valid measure of statistics. ... of the association be tween two variables. (D) It is a non-parametric method of statistical analysis.

Last Answer : (C) It allows one to determine the degree or strength of the association be tween two variables.

Which of the following equations as suggested by Colebrook and White gives the increase in roughness of a new surface (ε0 ) with age/time (t) (where, ε = roughness of the surface after time't'. α = a co-efficient to be experimentally determined)? (A) ε = ε0 + α.t (B) ε = ε0 + α.t 2 (C) ε = ε0 + α.t 3 (D) ε = ε0 + α.t

Description : Which of the following equations as suggested by Colebrook and White gives the increase in roughness of a new surface (ε0 ) with age/time (t) (where, ε = roughness of the surface after time't'. α = a co-efficient to be experimentally determined ... ε = ε0 + α.t 2 (C) ε = ε0 + α.t 3 (D) ε = ε0 + α.t

Last Answer : (A) ε = ε0 + α.t

Which of the following is not a dimension-less group used in catalysis? (Where, D = dispersion co-efficient, cm2 /sec.D1 = diffusion co-efficient; cm2 /sec L = length of the reactor, cm t = time, sec, v = volumetric flow rate, cm3 /sec. V = volume, cm3 .) (A) Reactor dispersion number (D/vL) (B) Reduced time (vt/V) (C) Thiele modulus L √(k/D1 ) (D) None of these

Description : Which of the following is not a dimension-less group used in catalysis? (Where, D = dispersion co-efficient, cm2 /sec.D1 = diffusion co-efficient; cm2 /sec L = length of the reactor, cm t = time, sec, v = volumetric ... (D/vL) (B) Reduced time (vt/V) (C) Thiele modulus L √(k/D1 ) (D) None of these

Last Answer : (D) None of these

Allowable bearing pressure for a foundation depends upon (A) Allowable settlement only (B) Ultimate bearing capacity of soil only (C) Both allowable settlement and ultimate bearing capacity (D) None of above

Description : Allowable bearing pressure for a foundation depends upon (A) Allowable settlement only (B) Ultimate bearing capacity of soil only (C) Both allowable settlement and ultimate bearing capacity (D) None of above

Last Answer : (C) Both allowable settlement and ultimate bearing capacity

A 300 mm square bearing plate settles by 15 mm in a plate load test on a cohesive soil when the intensity of loading is 0.2 N/mm². The settlement of a prototype shallow footing 1 m square under the same intensity of loading is (A) 15 mm (B) 30 mm (C) 50 mm (D) 167 mm

Description : A 300 mm square bearing plate settles by 15 mm in a plate load test on a cohesive soil when the intensity of loading is 0.2 N/mm². The settlement of a prototype shallow footing 1 m square under the same intensity of loading is (A) 15 mm (B) 30 mm (C) 50 mm (D) 167 mm

Last Answer : (C) 50 mm

Sedimentation analysis is based on the assumption: (A) Soil particles are spherical (B) Particles settle independent of other particles (C) Walls of the jar do not affect the settlement (D) All the above

Description : Sedimentation analysis is based on the assumption: (A) Soil particles are spherical (B) Particles settle independent of other particles (C) Walls of the jar do not affect the settlement (D) All the above

Last Answer : (D) All the above

Negative skin friction on piles (A) Is caused due to relative settlement of the soil (B) Is caused in soft clays (C) Decreases the pile capacity (D) All of the above

Description : Negative skin friction on piles (A) Is caused due to relative settlement of the soil (B) Is caused in soft clays (C) Decreases the pile capacity (D) All of the above

Last Answer : Answer: Option D

A 600 mm square bearing plate settles by 15 mm in plate load test on a cohesion-less soil under an intensity of loading of 0.2 N/ram². The settlement of a prototype shallow footing 1 m square under the same intensity of loading is (A) 15 mm (B) Between 15 mm and 25 mm (C) 25 mm (D) Greater than 25 mm

Description : A 600 mm square bearing plate settles by 15 mm in plate load test on a cohesion-less soil under an intensity of loading of 0.2 N/ram². The settlement of a prototype shallow footing 1 m square under the same intensity of ... (A) 15 mm (B) Between 15 mm and 25 mm (C) 25 mm (D) Greater than 25 mm

Last Answer : Answer: Option B

The maximum permissible differential settlement, in case of foundations in clayey soil, is usually limited to (A) 10 mm (B) 20 mm (C) 30 mm (D) 40 mm

Description : The maximum permissible differential settlement, in case of foundations in clayey soil, is usually limited to (A) 10 mm (B) 20 mm (C) 30 mm (D) 40 mm

Last Answer : Answer: Option D

In case of foundations on sandy soil, maximum permissible differential settlement, is usually limited to (A) 15 mm (B) 25 mm (C) 35 mm (D) 45 m

Description : In case of foundations on sandy soil, maximum permissible differential settlement, is usually limited to (A) 15 mm (B) 25 mm (C) 35 mm (D) 45 mm

Last Answer : Answer: Option B

The wetted wall tower is used to determine (A) Individual mass transfer co-efficient (M.T.C.) in gaseous system (B) M.T.C. of individual components in a liquid-liquid system (C) M.T.C. of liquid in liquid-gas system (D) The overall M.T.C. of the system

Description : The wetted wall tower is used to determine (A) Individual mass transfer co-efficient (M.T.C.) in gaseous system (B) M.T.C. of individual components in a liquid-liquid system (C) M.T.C. of liquid in liquid-gas system (D) The overall M.T.C. of the system

Last Answer : (A) Individual mass transfer co-efficient (M.T.C.) in gaseous system

In a vapor-liquid contacting equipment, the overall gas phase mass transfer co-efficient (M.T.C), KG is related to individual co-efficients (KG and KL ) as (A) KG = 1/KG + m/KL (B) 1/KG = 1/KG + m/KL (C) 1/KG = 1/KL + m/KG (D) KG = 1/KL + m/KG

Description : In a vapor-liquid contacting equipment, the overall gas phase mass transfer co-efficient (M.T.C), KG is related to individual co-efficients (KG and KL ) as (A) KG = 1/KG + m/KL (B) 1/KG = 1/KG + m/KL (C) 1/KG = 1/KL + m/KG (D) KG = 1/KL + m/KG

Last Answer : (B) 1/KG = 1/KG + m/KL

Pick out the wrong statement. (A) The shear stress at the pipe (dia = D, length = L) wall in case of laminar flow of Newtonian fluids is (D/4L). ∆p (B) In the equation, T. gc = k. (du/dy) n the value of 'n' for pseudoplastic and Dilatant fluid are < 1 and >1 respectively (C) Shear stress for Newtonian fluid is proportional to the rate of shear in the direction perpendicular to motion (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids

Description : Pick out the wrong statement. (A) The shear stress at the pipe (dia = D, length = L) wall in case of laminar flow of Newtonian fluids is (D/4L). ∆p (B) In the equation, T. gc = k. ... to motion (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids

Last Answer : (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids