AA saturated clay is to be tested for shearing strength. Which test should be recommended? a) Direct shear test b) Triaxial shear test c) Vane shear test d) Unconfined compression*

A saturated clay is to be tested for shearing strength. Which test should be recommended?
a) Direct shear test
b) Triaxial shear test
c) Vane shear test  
d) Unconfined compression*
by

1 Answer

Answer :

d) Unconfined compression*
by

Related questions

For testing a saturated clay for shear strength, the test recommended, is (A) Direct shear test (B) Triaxial compression test (C) Unconfined compression test (D) All the above

Description : For testing a saturated clay for shear strength, the test recommended, is (A) Direct shear test (B) Triaxial compression test (C) Unconfined compression test (D) All the above

Last Answer : Answer: Option C

Pick up the correct statement from the following: (A) An unconfined compression test is a special case of triaxial compression test (B) An unconfined compression test is a special case of direct shear test (C) The confining pressure is maximum during an unconfined compression test (D) The cylindrical specimen of a soil is subjected to major principal stress till it fails due to shearing along the plane of the failure

Description : Pick up the correct statement from the following: (A) An unconfined compression test is a special case of triaxial compression test (B) An unconfined compression test is a special case of direct ... subjected to major principal stress till it fails due to shearing along the plane of the failure

Last Answer : Option A

Select the incorrect statement. (A) In a direct shear box test, the plane of shear failure is predetermined (B) Better control is achieved on the drainage of the soil in a triaxial compression test (C) Stress distribution on the failure plane in the case of triaxial compression test is uniform (D) Unconfined compression test can be carried out on all types of soils

Description : Select the incorrect statement. (A) In a direct shear box test, the plane of shear failure is predetermined (B) Better control is achieved on the drainage of the soil in a triaxial compression ... compression test is uniform (D) Unconfined compression test can be carried out on all types of soils

Last Answer : Answer: Option D

Unconfined compression test it most suitable for determining the : 1. Sensitivity of clays 2. Settlement of embankments 3. ‘Strength’ of partially saturated clay sample 4. ‘Strength’ of fully saturated clay sample (a) 1, 2, 3 and 4 (b) 2 and 3 only (c) 3 and 4 only (d) 1 and 4 only

Description : Unconfined compression test it most suitable for determining the : 1. Sensitivity of clays 2. Settlement of embankments 3. ‘Strength’ of partially saturated clay sample 4. ‘Strength’ of fully saturated clay sample (a) 1, 2, 3 and 4 (b) 2 and 3 only (c) 3 and 4 only (d) 1 and 4 only

Last Answer : (d) 1 and 4 only

For the determination of shear strength parameters, c and , of soil in the laboratory, the test to be conducted will be (a) Triaxial compression test (b) Sieve analysis (c) Compaction test (d) Relative density test

Description : For the determination of shear strength parameters, c and , of soil in the laboratory, the test to be conducted will be (a) Triaxial compression test (b) Sieve analysis (c) Compaction test (d) Relative density test

Last Answer : (a) Triaxial compression test

The vane shear test is used for the in-situ determination of the undrained strength of the intact fully saturated (A) Sands (B) Clays (C) Gravels (D) Highly organic soils

Description : The vane shear test is used for the in-situ determination of the undrained strength of the intact fully saturated (A) Sands (B) Clays (C) Gravels (D) Highly organic soils

Last Answer : (B) Clays

At the liquid limit a) The soil just begins to crumble when rolled into a thread b) The shearing strength against flowing is negligible c) The shearing strength against flowing is a small but definite* d) The soil will not get fully saturated

Description : At the liquid limit a) The soil just begins to crumble when rolled into a thread b) The shearing strength against flowing is negligible c) The shearing strength against flowing is a small but definite* d) The soil will not get fully saturated

Last Answer : c) The shearing strength against flowing is a small but definite

Consider the following statements: 1. For a saturated soil, Skempton’s B-parameter is nearly equal to unity. 2. For an undisturbed sensitive clay, the stress-strain curve shows a peak. 3. Interlocking contributes significantly to the shearing strength in case of dense sand. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. For a saturated soil, Skempton's B-parameter is nearly equal to unity. 2. For an undisturbed sensitive clay, the stress-strain curve shows a peak. 3. Interlocking contributes significantly to the shearing ... 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (a) 1, 2 & 3

In the triaxial compression test, the application of additional axial stress (i.e. deviator stress) on the soil specimen produces shear stress on (A) Horizontal plane only (B) Vertical plane only (C) Both horizontal and vertical planes (D) All planes except horizontal and vertical planes

Description : In the triaxial compression test, the application of additional axial stress (i.e. deviator stress) on the soil specimen produces shear stress on (A) Horizontal plane only (B) Vertical plane only (C) Both horizontal and vertical planes (D) All planes except horizontal and vertical planes

Last Answer : (D) All planes except horizontal and vertical planes

A triaxial shear test is preferred to direct shear test, because (A) It can be performed under all three drainage conditions with complete control (B) Precise measurement of pore pressure and change in volume during test, is not possible (C) Stress distribution on the failure plane, is non uniform (D) None of these

Description : A triaxial shear test is preferred to direct shear test, because (A) It can be performed under all three drainage conditions with complete control (B) Precise measurement of pore pressure and change in ... possible (C) Stress distribution on the failure plane, is non uniform (D) None of these

Last Answer : Answer: Option A

For shear strength, triaxial shear test is suitable because (A) It can be performed under all three drainage conditions (B) Precise measurement of the pore pressure and volume change during the test is possible (C) Stress distribution on the failure plane, is uniform (D) All the above

Description : For shear strength, triaxial shear test is suitable because (A) It can be performed under all three drainage conditions (B) Precise measurement of the pore pressure and volume change during the test is possible (C) Stress distribution on the failure plane, is uniform (D) All the above

Last Answer : (D) All the above

Sensitivity of a soil can be defined as (A) Percentage of volume change of soil under saturated condition (B) Ratio of compressive strength of unconfined undisturbed soil to that of soil in a remoulded state (C) Ratio of volume of voids to volume of solids (D) None of the above

Description : Sensitivity of a soil can be defined as (A) Percentage of volume change of soil under saturated condition (B) Ratio of compressive strength of unconfined undisturbed soil to that of soil in a remoulded state (C) Ratio of volume of voids to volume of solids (D) None of the above

Last Answer : Answer: Option B

The side slope of formation in embankment /cutting depends on a) Shearing strength of soil and its angle of repose* b) Angle of repose c) Bearing capacity of the soil d) Optimum moisture content of the soil

Description : The side slope of formation in embankment /cutting depends on a) Shearing strength of soil and its angle of repose* b) Angle of repose c) Bearing capacity of the soil d) Optimum moisture content of the soil

Last Answer : a) Shearing strength of soil and its angle of repose*

In a triaxial compression test when drainage is allowed during the first stage (i. e. application of cell pressure) only and not during the second stage (i.e. application of deviator stress at constant cell pressure), the test is known as (A) Consolidated drained test (B) Consolidated undrained test (C) Unconsolidated drained test (D) Unconsolidated undrained test

Description : In a triaxial compression test when drainage is allowed during the first stage (i. e. application of cell pressure) only and not during the second stage (i.e. application of deviator ... test (B) Consolidated undrained test (C) Unconsolidated drained test (D) Unconsolidated undrained test

Last Answer : (B) Consolidated undrained test

Quicksand is a) Moist sand containing a small percentage of clay b) Is a condition which generally occurs in coarse sands c) Is a condition in which cohesive properties of soil increase rapidly d) Is a condition in which a cohesion less soil loses its strength because of upward flow of water

Description : Quicksand is a) Moist sand containing a small percentage of clay b) Is a condition which generally occurs in coarse sands c) Is a condition in which cohesive properties of soil increase rapidly d) Is a condition in which a cohesion less soil loses its strength because of upward flow of water

Last Answer : d) Is a condition in which a cohesion less soil loses its strength because of upward flow of water

Explain vane shear test carried on given soil sample.

Description : Explain vane shear test carried on given soil sample.

Last Answer : i) The undrained shear strength of soft clays can be determined in a laboratory by a vane shear test ii) Apparatus - A) Consist of a vertical steel rod having four thin stainless steel blades fixed at ... Only bottom end partakes in shearing where τ is in N / mm2 and T is in N - mm

A well is sunk in an unconfined aquifer having a saturated depth of 100 m. Assuming the equilibrium flow conditions and a homogeneous aquifer and radius of influence to be same, the ratio of discharges at 20 m and 40 m draw downs, is (A) 2/3 (B) 5/4 (C) 4/5 (D) 8/7

Description : A well is sunk in an unconfined aquifer having a saturated depth of 100 m. Assuming the equilibrium flow conditions and a homogeneous aquifer and radius of influence to be same, the ratio of discharges at 20 m and 40 m draw downs, is (A) 2/3 (B) 5/4 (C) 4/5 (D) 8/7

Last Answer : Answer: Option D

Failure of a slope occurs only when total shear force is A) Equal to total shearing strength (B) Greater than total shearing strength (C) Less than total shearing strength (D) None of these

Description : Failure of a slope occurs only when total shear force is A) Equal to total shearing strength (B) Greater than total shearing strength (C) Less than total shearing strength (D) None of these

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) Isotropic consolidation of clay can be obtained in the triaxial apparatus under equal all￾round pressure (B) If the present effective stress is the maximum to which the clay has ever been subjected, it is called normally consolidated clay (C) If the present effective stress in the past was more than present effective stress, it is called over-consolidated clay (D) All the above

Description : Pick up the correct statement from the following: (A) Isotropic consolidation of clay can be obtained in the triaxial apparatus under equal all￾round pressure (B) If the present effective stress is the ... more than present effective stress, it is called over-consolidated clay (D) All the above

Last Answer : Answer: Option D

Side looking 700 2MHZ probe is tested for detecting. (i) Flaw in head (ii) Flaw in web (iii) Half moon crack in flange.* (iv) For all above.

Description : Side looking 700 2MHZ probe is tested for detecting. (i) Flaw in head (ii) Flaw in web (iii) Half moon crack in flange.* (iv) For all above.

Last Answer : iii) Half moon crack in flange

By 00 probe in AT weld testing with normal gain setting. (i) Area below N.axis can be tested. (ii) Area below N.axis can not be tested.* (iii) Only web below N.axis can be tested. (iv) All above are correct.

Description : By 00 probe in AT weld testing with normal gain setting. (i) Area below N.axis can be tested. (ii) Area below N.axis can not be tested.* (iii) Only web below N.axis can be tested. (iv) All above are correct.

Last Answer : (ii) Area below N.axis can not be tested.*

Pick up the incorrect definition from the following: (A) Ratio of the compressive strength of unconfined undisturbed soil to that of remoulded soil, is known as the sensitivity of the soil sample (B) The rotation of soil particles into stable state while remoulding, is known as the thiostropy of soil (C) The water content at which a soil flows, is known plastic limit of the soil (D) None of these

Description : Pick up the incorrect definition from the following: (A) Ratio of the compressive strength of unconfined undisturbed soil to that of remoulded soil, is known as the sensitivity of the soil sample (B) The ... content at which a soil flows, is known plastic limit of the soil (D) None of these

Last Answer : Answer: Option D

Explain the direct shear test to determine shear strength of soil.

Description : Explain the direct shear test to determine shear strength of soil.

Last Answer : Procedure for Direct Shear Test: 1. Take 2.5 Kg air dried soil sample passing through 4.75 mm and retained on 2.36mm IS sieve. 2. Measure the internal dimensions of the shear box. Fix ... value Normal Stress as abscissa and the maximum shearing stress as ordinate to find shear strength of soil.

Ultrasonic Pulse Velocity test is meant for a) Identifying the integrity of concrete* b) Finding the strength of concrete c) To know the crack in steel structure d) To know the flaw in rail

Description : Ultrasonic Pulse Velocity test is meant for a) Identifying the integrity of concrete* b) Finding the strength of concrete c) To know the crack in steel structure d) To know the flaw in rail

Last Answer : a) Identifying the integrity of concrete*

The dry density of soil is a) Always greater than the saturated density b) Weight of soil solids per unit of total volume prior to drying* c) Total weight of soil solids per unit of its total volume d) Total weight of soil mass per unit of its total volume

Description : The dry density of soil is a) Always greater than the saturated density b) Weight of soil solids per unit of total volume prior to drying* c) Total weight of soil solids per unit of its total volume d) Total weight of soil mass per unit of its total volume

Last Answer : b) Weight of soil solids per unit of total volume prior to drying*

Black cotton soils are a) Heavy clay soils varying from clay to Loam, with clay content of 40 to 50% formed by decomposition of rocks by long continued weathering* b) Compacted and laminated clays c) Soils containing carbon of coal underneath d) Dark brown earthy materials formed due to partial or complete decomposition of vegetable matter

Description : Black cotton soils are a) Heavy clay soils varying from clay to Loam, with clay content of 40 to 50% formed by decomposition of rocks by long continued weathering* b) Compacted and ... underneath d) Dark brown earthy materials formed due to partial or complete decomposition of vegetable matter

Last Answer : a) Heavy clay soils varying from clay to Loam, with clay content of 40 to 50% formed by decomposition of rocks by long continued weathering*

………….. soil has the least SBC of the soil. a) Hard moorum b) Stiff clay c) Black cotton soil* d) Soft rock

Description : ………….. soil has the least SBC of the soil. a) Hard moorum b) Stiff clay c) Black cotton soil* d) Soft rock

Last Answer : c) Black cotton soil*

The shear strength in plastic undrained clay, is due to (A) Inter-granular friction (B) Internal friction (C) Cohesion (D) None of these

Description : The shear strength in plastic undrained clay, is due to (A) Inter-granular friction (B) Internal friction (C) Cohesion (D) None of these

Last Answer : (C) Cohesion

Pick up the correct statement from the following: (A) Sandy clayloam contains highest percentage of sand (B) Silty clayloam contains highest percentage of silt (C) Stiff boulder clay offers maximum shear strength (D) Soft chalk carries least safe load

Description : Pick up the correct statement from the following: (A) Sandy clayloam contains highest percentage of sand (B) Silty clayloam contains highest percentage of silt (C) Stiff boulder clay offers maximum shear strength (D) Soft chalk carries least safe load

Last Answer : Answer: Option B

Critical shear stress of cohesive sediment (a) Decreases with the void ratio for a given plasticity index (b) Increases with the plasticity index for a given void ratio (c) Increases with shear strength for a given clay content (d) All of the above.

Description : Critical shear stress of cohesive sediment (a) Decreases with the void ratio for a given plasticity index (b) Increases with the plasticity index for a given void ratio (c) Increases with shear strength for a given clay content (d) All of the above.

Last Answer : (c) Increases with shear strength for a given clay content

Consider the following statements: For pure clay, the shear strength parameters will be 1. Cohesion c = 0; and angle of internal friction  will be maximum. 2. Cohesion c is maximum; and angle of internal friction  is also maximum. 3. Angle of internal friction  is zero, with some value of cohesion c. Which of these statements is/are correct? (a) 1, 2 & 3 (b) 1 only (c) 3 only (d) 2 only

Description : Consider the following statements: For pure clay, the shear strength parameters will be 1. Cohesion c = 0; and angle of internal friction  will be maximum. 2. Cohesion c is maximum; and angle of internal friction  is also maximum. ... is/are correct? (a) 1, 2 & 3 (b) 1 only (c) 3 only (d) 2 only

Last Answer : (c) 3 only

Norms for No. of seats at recommended level at Cat. E stn. is (a) 0.4 Ndb (b) 0.4 Nds* (c) 0.4 Nmax (d) 100 on each P.F.

Description : Norms for No. of seats at recommended level at Cat. E stn. is (a) 0.4 Ndb (b) 0.4 Nds* (c) 0.4 Nmax (d) 100 on each P.F.

Last Answer : (b) 0.4 Nds*

Norms for No. of seats at recommended level at Cat. D stn. is (a) 0.4 Ndb (b) 0.4 Nds* (c) 0.4 Nmax (d) 100 on each P.F.

Description : Norms for No. of seats at recommended level at Cat. D stn. is (a) 0.4 Ndb (b) 0.4 Nds* (c) 0.4 Nmax (d) 100 on each P.F.

Last Answer : (b) 0.4 Nds*

Norms for No. of seats at recommended level at Cat. C stn. is (a) 0.4 Ndb (b) 0.4 Nds* (c) 0.4 Nmax (d) 100 on each P.F.

Description : Norms for No. of seats at recommended level at Cat. C stn. is (a) 0.4 Ndb (b) 0.4 Nds* (c) 0.4 Nmax (d) 100 on each P.F.

Last Answer : (b) 0.4 Nds*

Norms for No. of seats at recommended level at Cat. B stn. is (a) 0.4 Ndb * (b) 0.4 Nds (c) 0.4 Nmax (d) 100 on each P.F.

Description : Norms for No. of seats at recommended level at Cat. B stn. is (a) 0.4 Ndb * (b) 0.4 Nds (c) 0.4 Nmax (d) 100 on each P.F.

Last Answer : (a) 0.4 Ndb

Norms for No. of seats at recommended level at Cat. A stn. is (a) 0.4 Ndb* (b) 0.4 Nds (c) 0.4 Nmax (d) 100 on each P.F.

Description : Norms for No. of seats at recommended level at Cat. A stn. is (a) 0.4 Ndb* (b) 0.4 Nds (c) 0.4 Nmax (d) 100 on each P.F.

Last Answer : (a) 0.4 Ndb*

Number of taps on platform as per norms for recommended level of facilities (a) One for every coach (b) One for alternate coach* (c) One every 200 metres distance (d) At the discretion of DRM

Description : Number of taps on platform as per norms for recommended level of facilities (a) One for every coach (b) One for alternate coach* (c) One every 200 metres distance (d) At the discretion of DRM

Last Answer : (b) One for alternate coach*

Urinals & Latrines for A & B stations as norms for recommended level of facilities for railway station (a) Ndb/500 (b) Ndb/300 (c) Ndb/200* (d) None of the above

Description : Urinals & Latrines for A & B stations as norms for recommended level of facilities for railway station (a) Ndb/500 (b) Ndb/300 (c) Ndb/200* (d) None of the above

Last Answer : (c) Ndb/200*

A model stations on railways should have (a) Minimum essential facilities (b) Desirable facilities* (c) Recommended facilities (d) All the above

Description : A model stations on railways should have (a) Minimum essential facilities (b) Desirable facilities* (c) Recommended facilities (d) All the above

Last Answer : b) Desirable facilities*

The recommended width of Single line formation cutting for BG excluding drain is a) 6250 mm* b) 6850mm c) 54 90mm d) 6100mm

Description : The recommended width of Single line formation cutting for BG excluding drain is a) 6250 mm* b) 6850mm c) 54 90mm d) 6100mm

Last Answer : a) 6250 mm*

The recommended width of Double line cutting formation for B G is a) 10210 mm b) 10 975 mm c) 11555 mm* d) 10 820 mm

Description : The recommended width of Double line cutting formation for B G is a) 10210 mm b) 10 975 mm c) 11555 mm* d) 10 820 mm

Last Answer : c) 11555 mm*

The concrete under water minimum grade of cement recommended by IS code a) M 10 b) M 15 c) M 20* d) M 25

Description : The concrete under water minimum grade of cement recommended by IS code a) M 10 b) M 15 c) M 20* d) M 25

Last Answer : c) M 20*

The recommended maximum gradient in the year for B.G is- (a) 1 in 1000 (b) 1 in 1200* ( c) 1 in 1500 (d) 1 in 1800

Description : The recommended maximum gradient in the year for B.G is- (a) 1 in 1000 (b) 1 in 1200* ( c) 1 in 1500 (d) 1 in 1800

Last Answer : (b) 1 in 1200*

Minimum rail section recommended for section having traffic more than 20 GMT is (a) 90 UTS (b) 52 Kg. (c) 60 Kg.* (d) None of the above.

Description : Minimum rail section recommended for section having traffic more than 20 GMT is (a) 90 UTS (b) 52 Kg. (c) 60 Kg.* (d) None of the above.

Last Answer : (c) 60 Kg.

The maximum permissible speed recommended for Indian Railways for 1 in 8 and half crossing is a)16 kmph* b) 20 kmph c)24 kmph

Description : The maximum permissible speed recommended for Indian Railways for 1 in 8 and half crossing is a)16 kmph* b) 20 kmph c)24 kmph

Last Answer : a)16 kmph*

Suitability of steel for its use in cable is judged by its strength in (A) Tension (B) Compression (C) Torsion (D) Shear

Description : Suitability of steel for its use in cable is judged by its strength in (A) Tension (B) Compression (C) Torsion (D) Shear

Last Answer : (A) Tension

A compression spring is made of music wire of 2 mm diameter having a shear strength and shear modulus of 800 Mpa and 80 Gpa respectively. The mean coil diameter is 20mm, free length is 40 mm, and the number of active coils is 10. If the mean coil diameter is reduced to 10 mm, the stiffness of the spring is approximately a. increased by 8 times b. decreased by 2 times c. increased by 2 times d. decreased by 8 times

Description : A compression spring is made of music wire of 2 mm diameter having a shear strength and shear modulus of 800 Mpa and 80 Gpa respectively. The mean coil diameter is 20mm, free length is 40 mm, and the number ... by 8 times b. decreased by 2 times c. increased by 2 times d. decreased by 8 times

Last Answer : a. increased by 8 times

The maximum pressure which the soil can carry safely without the risk of shear failure is called a) Safe bearing capacity b) Ultimate bearing capacity* c) Allowable bearing capacity d) Shear bearing capacity

Description : The maximum pressure which the soil can carry safely without the risk of shear failure is called a) Safe bearing capacity b) Ultimate bearing capacity* c) Allowable bearing capacity d) Shear bearing capacity

Last Answer : b) Ultimate bearing capacity*

The mechanism involved in the removal of metal in drilling operation is by (A) Compression (B) Extrusion (C) Shearing (D) Both 'b' & 'c'

Description : The mechanism involved in the removal of metal in drilling operation is by (A) Compression (B) Extrusion (C) Shearing (D) Both 'b' & 'c'

Last Answer : (D) Both 'b' & 'c'

The coefficients of permeability of soils of an unconfined aquifer and another confined aquifer were determined by pumping water from the wells and observing the effect of water table in two test wells at equal distances was found to be equal. The total height of confined aquifer H is given by (A) H = h2 - h1 (B) H = h1 - h2 (C) H = h2 + h1 (D) ½ (h1 + h2)

Description : The coefficients of permeability of soils of an unconfined aquifer and another confined aquifer were determined by pumping water from the wells and observing the effect of water table in two test wells at equal distances was found to be equal. ... (B) H = h1 - h2 (C) H = h2 + h1 (D) ½ (h1 + h2)

Last Answer : Answer: Option D