In an irreversible process (A) Tds = dE - dW = 0 (B) dE - dW - Tds = 0 (C) Tds - dE + dW < 0 (D) Tds - dT + dW < 0

In an irreversible process
(A) Tds = dE - dW = 0
(B) dE - dW - Tds = 0
(C) Tds - dE + dW < 0
(D) Tds - dT + dW < 0
by

1 Answer

Answer :

(C) Tds - dE + dW < 0
by

Related questions

In an irreversible process (A) Tds = dE - dW = 0 (B) dE - dW - Tds = 0 (C) Tds - dE + dW < 0 (D) Tds - dT + dW < 0

Description : In an irreversible process (A) Tds = dE - dW = 0 (B) dE - dW - Tds = 0 (C) Tds - dE + dW < 0 (D) Tds - dT + dW < 0

Last Answer : (C) Tds - dE + dW < 0

In a reversible process (A) Tds = dE + dW (B) dE - dW = Tds (C) dW - dE = Tds (D) Tds - dW + dE >0

Description : In a reversible process (A) Tds = dE + dW (B) dE - dW = Tds (C) dW - dE = Tds (D) Tds - dW + dE >0

Last Answer : (A) Tds = dE + dW

What horse power is required to isothermally compress 800 ft^3 of Air per minute from 14.7 psia to 120 psia?  A. 28 hp  B.108 hp  C.256 hp  D.13900 hp Formula: W= p1V1 ln (p1/p2) Power = dW / dt

Description : What horse power is required to isothermally compress 800 ft^3 of Air per minute from 14.7 psia to 120 psia?  A. 28 hp  B.108 hp  C.256 hp  D.13900 hp Formula: W= p1V1 ln (p1/p2) Power = dW / dt

Last Answer : 108 hp

For a constant volume process (A) dE = CpdT (B) dE = CvdT (C) dQ = dE + pdV (D) dW = pdV

Description : For a constant volume process (A) dE = CpdT (B) dE = CvdT (C) dQ = dE + pdV (D) dW = pdV

Last Answer : (B) dE = CvdT

First law of thermodynamics is mathematically stated as (A) dQ = dE + dW (B) dQ = dE - dW (C) dE = dQ + dW (D) dW = dQ + dE

Description : First law of thermodynamics is mathematically stated as (A) dQ = dE + dW (B) dQ = dE - dW (C) dE = dQ + dW (D) dW = dQ + dE

Last Answer : First law of thermodynamics is mathematically stated as (A) dQ = dE + dW (B) dQ = dE - dW (C) dE = dQ + dW (D) dW = dQ + dE

Which of the following equations is obtained on combining 1st and 2nd law of thermodynamics, for a system of constant mass?(A) dE = Tds - PdV (B) dQ = CvdT + PdV (C) dQ = CpdT + Vdp (D) Tds = dE - PdV

Description : Which of the following equations is obtained on combining 1st and 2nd law of thermodynamics, for a system of constant mass? (A) dE = Tds - PdV (B) dQ = CvdT + PdV (C) dQ = CpdT + Vdp (D) Tds = dE - PdV

Last Answer : (A) dE = Tds - PdV

The equation Tds = dE - PdV applies to (A) Single phase fluid of varying composition (B) Single phase fluid of constant composition (C) Open as well as closed systems (D) Both (B) and (C)

Description : The equation Tds = dE - PdV applies to (A) Single phase fluid of varying composition (B) Single phase fluid of constant composition (C) Open as well as closed systems (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

The equation Tds = dE - PdV applies to (A) Single phase fluid of varying composition (B) Single phase fluid of constant composition (C) Open as well as closed systems (D) Both (B) and (C)

Description : The equation Tds = dE - PdV applies to (A) Single phase fluid of varying composition (B) Single phase fluid of constant composition (C) Open as well as closed systems (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

The gradient of the magnetic vector potential can be expressed as a) –με dV/dt b) +με dE/dt c) –με dA/dt d) +με dB/dt

Description : The gradient of the magnetic vector potential can be expressed as a) –με dV/dt b) +με dE/dt c) –με dA/dt d) +με dB/dt

Last Answer : a) –με dV/dt

dW and dq are not the exact differential, because q and W are (A) State functions (B) Path functions (C) Intensive properties (D) Extensive properties

Description : dW and dq are not the exact differential, because q and W are (A) State functions (B) Path functions (C) Intensive properties (D) Extensive properties

Last Answer : (B) Path functions

dW and dq are not the exact differential, because q and W are (A) State functions (B) Path functions (C) Intensive properties (D) Extensive properties

Description : dW and dq are not the exact differential, because q and W are (A) State functions (B) Path functions (C) Intensive properties (D) Extensive properties

Last Answer : (B) Path functions

The equation DU = Tds - PdV is applicable to infinitesimal changes occuring in (A) An open system of constant composition (B) A closed system of constant composition (C) An open system with changes in composition (D) A closed system with changes in composition

Description : The equation DU = Tds - PdV is applicable to infinitesimal changes occuring in (A) An open system of constant composition (B) A closed system of constant composition (C) An open system with changes in composition (D) A closed system with changes in composition

Last Answer : (D) A closed system with changes in composition

For a constant pressure reversible process, the enthalpy change (ΔH) of the system is (A) Cv.dT (B) Cp.dT (C) ∫ Cp.dT (D) ∫ Cv.dT

Description : For a constant pressure reversible process, the enthalpy change (ΔH) of the system is (A) Cv.dT (B) Cp.dT (C) ∫ Cp.dT (D) ∫ Cv.dT

Last Answer : (C) ∫ Cp.dT

For an irreversible process involving only pressure-volume work (A) (dF)T, p <0 (B) (dF)T, p = 0 (C) (dF)T, p > 0 (D) (dA)T, v >0

Description : For an irreversible process involving only pressure-volume work (A) (dF)T, p 0 (D) (dA)T, v >0

Last Answer : (A) (dF)T, p

Entropy change for an irreversible process taking system and surrounding together is (A) 0 (B) > 0 (C) < 0 (D) None of these

Description : Entropy change for an irreversible process taking system and surrounding together is (A) 0 (B) > 0 (C) < 0 (D) None of these

Last Answer : (B) > 0

In a totally irreversible isothermal expansion process for an ideal gas, ΔE = 0, ΔH = 0. Then ΔQ and ΔS will be (A) ΔQ = 0, ΔS=0 (B) ΔQ = 0, ΔS = +ve (C) ΔQ = 0, ΔS = -ve (D) ΔQ = +ve, ΔS= +ve

Description : In a totally irreversible isothermal expansion process for an ideal gas, ΔE = 0, ΔH = 0. Then ΔQ and ΔS will be (A) ΔQ = 0, ΔS=0 (B) ΔQ = 0, ΔS = +ve (C) ΔQ = 0, ΔS = -ve (D) ΔQ = +ve, ΔS= +ve

Last Answer : (B) ΔQ = 0, ΔS = +ve

The exit age distribution of a fluid leaving a vessel (denoted by E) is used to study the extent of non-ideal flow in the vessel. The value of ∫∞ 0 E.dt is (A) 0 (B) 1 (C) ∞ (D) √2π

Description : The exit age distribution of a fluid leaving a vessel (denoted by E) is used to study the extent of non-ideal flow in the vessel. The value of ∫∞ 0 E.dt is (A) 0 (B) 1 (C) ∞ (D) √2π

Last Answer : (B) 1

The first order gas phase reaction as shown in the bellow figure is conducted isothermally in batch mode. The rate of change of conversion with time is given by (A) dXA /dt = k1 (1 - XA ) 2 (1 + 2XA ) (B) dXA /dt = k1 (1 - XA ) (1 + 0.5XA ) (C) dXA /dt = k1 (1 - XA ) (D) dXA /dt = k1 (1 - XA )/(1 + XA )

Description : The first order gas phase reaction as shown in the bellow figure is conducted isothermally in batch mode. The rate of change of conversion with time is given by (A) dXA /dt = k1 (1 - XA ) 2 (1 + 2XA ) (B) dXA /dt = k1 (1 - XA ... 5XA ) (C) dXA /dt = k1 (1 - XA ) (D) dXA /dt = k1 (1 - XA )/(1 + XA )

Last Answer : (C) dXA /dt = k1 (1 - XA

Gibbs-Helmholtz equation is (A) ∆F = ∆H + T [∂(∆F)/∂T]P (B) ΔF = ΔH - TΔT (C) d(E - TS) T, V < 0 (D) dP/dT = ∆Hvap/T.∆Vvap

Description : Gibbs-Helmholtz equation is (A) ∆F = ∆H + T [∂(∆F)/∂T]P (B) ΔF = ΔH - TΔT (C) d(E - TS) T, V < 0 (D) dP/dT = ∆Hvap/T.∆Vvap

Last Answer : (A) ∆F = ∆H + T [∂(∆F)/∂T]P

Can you help me remember this character? (DW)

Description : Can you help me remember this character? (DW)

Last Answer : After looking at a few pics of Twiggy to refresh my memory, the two that come to mind are Donna Noble, played by Catherine Tate, and Rose Tyler, played by Billy Piper.

What "dw" stands for?

Description : What "dw" stands for?

Last Answer : It's stands for "Don't Worry"

what is stock value of DW Griffeth Inc.,

Description : what is stock value of DW Griffeth Inc.,

Last Answer : Need Answer

Which of the following is of type memory initialized Directive? i) DS ii) SET iii) DW iv) DBIT a) i, iii b) ii c) iii d) iv, ii

Description : Which of the following is of type memory initialized Directive? i) DS ii) SET iii) DW iv) DBIT a) i, iii b) ii c) iii d) iv, ii

Last Answer : b) ii

Botanical Words Alphabetical List - DW

Description : Botanical Words Alphabetical List - DW

Last Answer : DWARF FRUIT TREES:1. A small fruit tree reaching a height at maturity of 4 or 5 feet and bearing early, but normal fruit. DWARF PLANTS: Plants of genetically small size or those dwarfed ... SHRUBS: Shrubs that are selected or hybridized that are typically shorter and more compact than the species.

What is the full form of 'TDS' ? -How To ?

Description : What is the full form of 'TDS' ? -How To ?

Last Answer : The full form of 'TDS' is Tax Deducted at Source

What is TDS ?

Last Answer : The TDS of water is tested to determine the level of TDS, which is a complete form of TDS.

What is TDS ?

Last Answer : Trax deduction at source (tax deduction at source). If the entity responsible for deducting the source tax from the taxpayer's income is deducted from the source of income, it is necessary ... . The tax deductible authority certificate must be submitted with the return in favor of withholding tax.

Have an old Dell waning to get a Macbook & need a different modem for TDS Where how what?

Description : Have an old Dell waning to get a Macbook & need a different modem for TDS Where how what?

Last Answer : You should be able to buy an external 56K USB modem at any place that sells computer parts. The modem just plugs in to a USB port, and the phone line plugs into the modem.

No TDS will be deducted if the amount of interest paid in a financial year does not exceed Rs____ a) 3500/- b) 5000/- c) 1000/- d) 10000/

Description : No TDS will be deducted if the amount of interest paid in a financial year does not exceed Rs____ a) 3500/- b) 5000/- c) 1000/- d) 10000/

Last Answer : d) 10000/

is the measure of whether a plant is now using more or less energy to manufacture its product than it did in the past. a) Total Dissolved Solids (TDS). c) Plant Energy Performance (PEP) b) Revolutions Per Minute (RPM) d) Option (a) and (b)

Description : is the measure of whether a plant is now using more or less energy to manufacture its product than it did in the past. a) Total Dissolved Solids (TDS). c) Plant Energy Performance (PEP) b) Revolutions Per Minute (RPM) d) Option (a) and (b)

Last Answer : Plant Energy Performance (PEP)

is the measure of whether a plant is now using more or less energy to manufacture its product than it did in the past. a) Total Dissolved Solids (TDS) b) Plant Energy Performance (PEP) c) Revolutions Per Minute (RPM) d) Option (a) and (b)

Description : is the measure of whether a plant is now using more or less energy to manufacture its product than it did in the past. a) Total Dissolved Solids (TDS) b) Plant Energy Performance (PEP) c) Revolutions Per Minute (RPM) d) Option (a) and (b)

Last Answer : Plant Energy Performance (PEP)

80386 support which type of descriptor table from the following? a) TDS b) ADS c) GDS d) MDS

Description : 80386 support which type of descriptor table from the following? a) TDS b) ADS c) GDS d) MDS

Last Answer : c) GDS

The concentration of Total Dissolved Solids (TDS) in drinking water should not exceed (A) 500 mg/L (B) 400 mg/L (C) 300 mg/L (D) 200 mg/L

Description : The concentration of Total Dissolved Solids (TDS) in drinking water should not exceed (A) 500 mg/L (B) 400 mg/L (C) 300 mg/L (D) 200 mg/L

Last Answer : (A) 500 mg/L

How does an adiabatic process compare to an isentropic process?  A. Adiabatic heat transfer is not equal to zero; isentropic heat transfer is zero  B. Both heat transfer = 0; isentropic: reversible  C. Adiabatic heat transfer = 0; isentropic: heat transfer is not equal to zero  D. Both heat transfer is not equal to zero; isentropic: irreversible

Description : How does an adiabatic process compare to an isentropic process?  A. Adiabatic heat transfer is not equal to zero; isentropic heat transfer is zero  B. Both heat transfer = 0; isentropic: reversible  ... is not equal to zero  D. Both heat transfer is not equal to zero; isentropic: irreversible

Last Answer : Both heat transfer = 0; isentropic: reversible

For the function `f(x)=int_(0)^(x^(2))(-t^(2)/4)(4-t)dt`

Description : For the function `f(x)=int_(0)^(x^(2))(-t^(2)/4)(4-t)dt`

Last Answer : For the function `f(x)=int_(0)^(x^(2))(-t^(2)/4)(4-t)dt` A. local maximum occurs at x = ... maximum occurs at x = -2 D. local minimum occurs at x = 0

According to D' Alembert's principle, m (d 2 x/ dt 2 ) + c (dx/dt) + Kx =0 is the differential equation for damped free vibrations having single degree of freedom. What will be the solution to this differential equation if the system is critically damped? A x = (A + Bt) e – ωt B x = X e – ξωt (sin ω d t + Φ) C x = (A – Bt) e – ωt D x = X e – ξωt (cos ω d t + Φ)

Description : According to D' Alembert's principle, m (d 2 x/ dt 2 ) + c (dx/dt) + Kx =0 is the differential equation for damped free vibrations having single degree of freedom. What will be the solution to this differential equation if the system is ... Φ) C x = (A - Bt) e - ωt D x = X e - ξωt (cos ω d t + Φ)

Last Answer : A x = (A + Bt) e – ωt

The equation of motion for a vibrating system with viscous damping is d 2 x/dt 2 + c/m X dx/dt + s/m X x = 0 If the roots of this equation are real, then the system will be A. over damped B. under damped C. critically damped D. none of the mentioned

Description : The equation of motion for a vibrating system with viscous damping is d 2 x/dt 2 + c/m X dx/dt + s/m X x = 0 If the roots of this equation are real, then the system will be A. over damped B. under damped C. critically damped D. none of the mentioned

Last Answer : A. over damped

According to D' Alembert's principle, m (d 2 x/ dt 2 ) + c (dx/dt) + Kx =0 is the differential equation for damped free vibrations having single degree of freedom. What will be the solution to this differential equation if the system is critically damped? A. x = (A + Bt) e – ωt B. x = X e – ξωt (sin ω d t + Φ) C. x = (A – Bt) e – ωt D. x = X e – ξωt (cos ω d t + Φ

Description : According to D' Alembert's principle, m (d 2 x/ dt 2 ) + c (dx/dt) + Kx =0 is the differential equation for damped free vibrations having single degree of freedom. What will be the solution to this differential equation if the system is ... ) C. x = (A - Bt) e - ωt D. x = X e - ξωt (cos ω d t + Φ

Last Answer : A. x = (A + Bt) e – ωt

The equation m(d 2 x/ dt 2 ) + c (dx/dt) + Kx = F 0 sin ωt is a second order differential equation. The solution of this linear equation is given as A. complementary function B. particular function C. sum of complementary and particular function D. difference of complementary and particular function

Description : The equation m(d 2 x/ dt 2 ) + c (dx/dt) + Kx = F 0 sin ωt is a second order differential equation. The solution of this linear equation is given as A. complementary function B. particular function C. sum of complementary and particular function D. difference of complementary and particular function

Last Answer : C. sum of complementary and particular function

According to D' Alembert's principle, m (d 2 x/ dt 2 ) + c (dx/dt) + Kx =0 is the A differential equation for damped free vibrations having single degree of freedom. What will be the solution to this differential equation if the system is critically damped? ( A ) x = (A + Bt) e – ωt (B)x = X e – ξωt (sin ω d t + Φ) (C)x = (A – Bt) e – ωt ( D )x = X e – ξωt (cos ω d t + Φ

Description : According to D' Alembert's principle, m (d 2 x/ dt 2 ) + c (dx/dt) + Kx =0 is the A differential equation for damped free vibrations having single degree of freedom. What will be the solution to this differential equation if the system is ... (C)x = (A - Bt) e - ωt ( D )x = X e - ξωt (cos ω d t + Φ

Last Answer : ( A ) x = (A + Bt) e – ωt

According to D' Alembert's principle, m (d 2 x/ dt 2 ) + c (dx/dt) + Kx =0 is the differential equati damped free vibrations having single degree of freedom. What will be the solution to this differ equation if the system is critically damped? a. x = (A + Bt) e – ωt b. x = X e – ξωt (sin ω d t + Φ) c. x = (A – Bt) e – ωt d. x = X e – ξωt (cos ω d t + Φ)

Description : According to D' Alembert's principle, m (d 2 x/ dt 2 ) + c (dx/dt) + Kx =0 is the differential equati damped free vibrations having single degree of freedom. What will be the solution to this differ equation if the system is critically ... c. x = (A - Bt) e - ωt d. x = X e - ξωt (cos ω d t + Φ)

Last Answer : a. x = (A + Bt) e – ωt

The equation of motion for a vibrating system with viscous damping is d 2 x/dt 2 + c/m X dx/dt + k/m X x = 0 If the roots of this equation are real, then the system will be a) over damped b) under damped c) critically damped d) none of the mentioned Ans:a

Description : The equation of motion for a vibrating system with viscous damping is d 2 x/dt 2 + c/m X dx/dt + k/m X x = 0 If the roots of this equation are real, then the system will be a) over damped b) under damped c) critically damped d) none of the mentioned Ans:a

Last Answer : a) over damped

When electric potential is null, then the electric field intensity will be a) 0 b) 1 c) dA/dt d) –dA/dt

Description : When electric potential is null, then the electric field intensity will be a) 0 b) 1 c) dA/dt d) –dA/dt

Last Answer : d) –dA/dt

Calculate the recoverable waste heat (Q, in kCal/hour) from flue gases using the followingparameters: V (flow rate of the substance) 2000 m3/hr r (density of the flue gas): 0.9 kg/m3 Cp (specific heat of the substance): 0.20 kCal/kg oC DT (temperature difference): 120 oC h (recovery factor): 50% a. 21600 b. 43200 c. 25600 d. 34000

Description : Calculate the recoverable waste heat (Q, in kCal/hour) from flue gases using the followingparameters: V (flow rate of the substance) 2000 m3/hr r (density of the flue gas): 0.9 kg/m3 Cp (specific heat ... (temperature difference): 120 oC h (recovery factor): 50% a. 21600 b. 43200 c. 25600 d. 34000

Last Answer : 21600

Catalytic ammonia synthesis reaction as in Haber's process is (A) Endothermic (B) Exothermic (C) Irreversible (D) None of these

Description : Catalytic ammonia synthesis reaction as in Haber's process is (A) Endothermic (B) Exothermic (C) Irreversible (D) None of these

Last Answer : (B) Exothermic

When a gas in a vessel expands, its internal energy decreases. The process involved is (A) Reversible (B) Irreversible (C) Isothermal (D) Adiabatic

Description : When a gas in a vessel expands, its internal energy decreases. The process involved is (A) Reversible (B) Irreversible (C) Isothermal (D) Adiabatic

Last Answer : (A) Reversible

Pick out the correct statement. (A) The available energy in an isolated system for all irreversible (real) processes decreases (B) The efficiency of a Carnot engine increases, if the sink temperature is decreased (C) The reversible work for compression in non-flow process under isothermal condition is the change in Helmholtz free energy (D) All (A), (B) and (C)

Description : Pick out the correct statement. (A) The available energy in an isolated system for all irreversible (real) processes decreases (B) The efficiency of a Carnot engine increases, if the sink temperature is decreased ... condition is the change in Helmholtz free energy (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the correct statement. (A) If an insoluble gas is passed through a volatile liquid placed in a perfectly insulated container, the temperature of the liquid will increase (B) A process is irreversible as long as Δ S for the system is greater than zero (C) The mechanical work done by a system is always equal to∫P.dV (D) The heat of formation of a compound is defined as the heat of reaction leading to the formation of the compound from its reactants

Description : Pick out the correct statement. (A) If an insoluble gas is passed through a volatile liquid placed in a perfectly insulated container, the temperature of the liquid will increase (B) A ... compound is defined as the heat of reaction leading to the formation of the compound from its reactants

Last Answer : (D) The heat of formation of a compound is defined as the heat of reaction leading to the formation of the compound from its reactants

PVy = constant, holds good for an isentropic process, which is (A) Reversible and isothermal (B) Isothermal and irreversible (C) Reversible and adiabatic (D) Adiabatic and irreversible

Description : PVy = constant, holds good for an isentropic process, which is (A) Reversible and isothermal (B) Isothermal and irreversible (C) Reversible and adiabatic (D) Adiabatic and irreversible

Last Answer : C) Reversible and adiabatic

Pick out the wrong statement: (A) The expansion of a gas in vacuum is an irreversible process (B) An isometric process is a constant pressure process (C) Entropy change for a reversible adiabatic process is zero (D) Free energy change for a spontaneous process is negative

Description : Pick out the wrong statement: (A) The expansion of a gas in vacuum is an irreversible process (B) An isometric process is a constant pressure process (C) Entropy change for a reversible adiabatic process is zero (D) Free energy change for a spontaneous process is negative

Last Answer : (B) An isometric process is a constant pressure process