In a reversible process (A) Tds = dE + dW (B) dE - dW = Tds (C) dW - dE = Tds (D) Tds - dW + dE >0

In a reversible process
(A) Tds = dE + dW
(B) dE - dW = Tds
(C) dW - dE = Tds
(D) Tds - dW + dE >0
by

1 Answer

Answer :

(A) Tds = dE + dW
by

Related questions

In an irreversible process (A) Tds = dE - dW = 0 (B) dE - dW - Tds = 0 (C) Tds - dE + dW < 0 (D) Tds - dT + dW < 0

Description : In an irreversible process (A) Tds = dE - dW = 0 (B) dE - dW - Tds = 0 (C) Tds - dE + dW < 0 (D) Tds - dT + dW < 0

Last Answer : (C) Tds - dE + dW < 0

In an irreversible process (A) Tds = dE - dW = 0 (B) dE - dW - Tds = 0 (C) Tds - dE + dW < 0 (D) Tds - dT + dW < 0

Description : In an irreversible process (A) Tds = dE - dW = 0 (B) dE - dW - Tds = 0 (C) Tds - dE + dW < 0 (D) Tds - dT + dW < 0

Last Answer : (C) Tds - dE + dW < 0

For a constant volume process (A) dE = CpdT (B) dE = CvdT (C) dQ = dE + pdV (D) dW = pdV

Description : For a constant volume process (A) dE = CpdT (B) dE = CvdT (C) dQ = dE + pdV (D) dW = pdV

Last Answer : (B) dE = CvdT

First law of thermodynamics is mathematically stated as (A) dQ = dE + dW (B) dQ = dE - dW (C) dE = dQ + dW (D) dW = dQ + dE

Description : First law of thermodynamics is mathematically stated as (A) dQ = dE + dW (B) dQ = dE - dW (C) dE = dQ + dW (D) dW = dQ + dE

Last Answer : First law of thermodynamics is mathematically stated as (A) dQ = dE + dW (B) dQ = dE - dW (C) dE = dQ + dW (D) dW = dQ + dE

Which of the following equations is obtained on combining 1st and 2nd law of thermodynamics, for a system of constant mass?(A) dE = Tds - PdV (B) dQ = CvdT + PdV (C) dQ = CpdT + Vdp (D) Tds = dE - PdV

Description : Which of the following equations is obtained on combining 1st and 2nd law of thermodynamics, for a system of constant mass? (A) dE = Tds - PdV (B) dQ = CvdT + PdV (C) dQ = CpdT + Vdp (D) Tds = dE - PdV

Last Answer : (A) dE = Tds - PdV

The equation Tds = dE - PdV applies to (A) Single phase fluid of varying composition (B) Single phase fluid of constant composition (C) Open as well as closed systems (D) Both (B) and (C)

Description : The equation Tds = dE - PdV applies to (A) Single phase fluid of varying composition (B) Single phase fluid of constant composition (C) Open as well as closed systems (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

The equation Tds = dE - PdV applies to (A) Single phase fluid of varying composition (B) Single phase fluid of constant composition (C) Open as well as closed systems (D) Both (B) and (C)

Description : The equation Tds = dE - PdV applies to (A) Single phase fluid of varying composition (B) Single phase fluid of constant composition (C) Open as well as closed systems (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

For an isothermal reversible compression of an ideal gas (A) Only ΔE = 0 (B) Only ΔH =0 (C) ΔE = ΔH = 0 (D) dQ = dE

Description : For an isothermal reversible compression of an ideal gas (A) Only ΔE = 0 (B) Only ΔH =0 (C) ΔE = ΔH = 0 (D) dQ = dE

Last Answer : C) ΔE = ΔH = 0

dW and dq are not the exact differential, because q and W are (A) State functions (B) Path functions (C) Intensive properties (D) Extensive properties

Description : dW and dq are not the exact differential, because q and W are (A) State functions (B) Path functions (C) Intensive properties (D) Extensive properties

Last Answer : (B) Path functions

dW and dq are not the exact differential, because q and W are (A) State functions (B) Path functions (C) Intensive properties (D) Extensive properties

Description : dW and dq are not the exact differential, because q and W are (A) State functions (B) Path functions (C) Intensive properties (D) Extensive properties

Last Answer : (B) Path functions

The equation DU = Tds - PdV is applicable to infinitesimal changes occuring in (A) An open system of constant composition (B) A closed system of constant composition (C) An open system with changes in composition (D) A closed system with changes in composition

Description : The equation DU = Tds - PdV is applicable to infinitesimal changes occuring in (A) An open system of constant composition (B) A closed system of constant composition (C) An open system with changes in composition (D) A closed system with changes in composition

Last Answer : (D) A closed system with changes in composition

Can you help me remember this character? (DW)

Description : Can you help me remember this character? (DW)

Last Answer : After looking at a few pics of Twiggy to refresh my memory, the two that come to mind are Donna Noble, played by Catherine Tate, and Rose Tyler, played by Billy Piper.

What "dw" stands for?

Description : What "dw" stands for?

Last Answer : It's stands for "Don't Worry"

what is stock value of DW Griffeth Inc.,

Description : what is stock value of DW Griffeth Inc.,

Last Answer : Need Answer

What horse power is required to isothermally compress 800 ft^3 of Air per minute from 14.7 psia to 120 psia?  A. 28 hp  B.108 hp  C.256 hp  D.13900 hp Formula: W= p1V1 ln (p1/p2) Power = dW / dt

Description : What horse power is required to isothermally compress 800 ft^3 of Air per minute from 14.7 psia to 120 psia?  A. 28 hp  B.108 hp  C.256 hp  D.13900 hp Formula: W= p1V1 ln (p1/p2) Power = dW / dt

Last Answer : 108 hp

Which of the following is of type memory initialized Directive? i) DS ii) SET iii) DW iv) DBIT a) i, iii b) ii c) iii d) iv, ii

Description : Which of the following is of type memory initialized Directive? i) DS ii) SET iii) DW iv) DBIT a) i, iii b) ii c) iii d) iv, ii

Last Answer : b) ii

Botanical Words Alphabetical List - DW

Description : Botanical Words Alphabetical List - DW

Last Answer : DWARF FRUIT TREES:1. A small fruit tree reaching a height at maturity of 4 or 5 feet and bearing early, but normal fruit. DWARF PLANTS: Plants of genetically small size or those dwarfed ... SHRUBS: Shrubs that are selected or hybridized that are typically shorter and more compact than the species.

What is the full form of 'TDS' ? -How To ?

Description : What is the full form of 'TDS' ? -How To ?

Last Answer : The full form of 'TDS' is Tax Deducted at Source

What is TDS ?

Last Answer : The TDS of water is tested to determine the level of TDS, which is a complete form of TDS.

What is TDS ?

Last Answer : Trax deduction at source (tax deduction at source). If the entity responsible for deducting the source tax from the taxpayer's income is deducted from the source of income, it is necessary ... . The tax deductible authority certificate must be submitted with the return in favor of withholding tax.

Have an old Dell waning to get a Macbook & need a different modem for TDS Where how what?

Description : Have an old Dell waning to get a Macbook & need a different modem for TDS Where how what?

Last Answer : You should be able to buy an external 56K USB modem at any place that sells computer parts. The modem just plugs in to a USB port, and the phone line plugs into the modem.

No TDS will be deducted if the amount of interest paid in a financial year does not exceed Rs____ a) 3500/- b) 5000/- c) 1000/- d) 10000/

Description : No TDS will be deducted if the amount of interest paid in a financial year does not exceed Rs____ a) 3500/- b) 5000/- c) 1000/- d) 10000/

Last Answer : d) 10000/

is the measure of whether a plant is now using more or less energy to manufacture its product than it did in the past. a) Total Dissolved Solids (TDS). c) Plant Energy Performance (PEP) b) Revolutions Per Minute (RPM) d) Option (a) and (b)

Description : is the measure of whether a plant is now using more or less energy to manufacture its product than it did in the past. a) Total Dissolved Solids (TDS). c) Plant Energy Performance (PEP) b) Revolutions Per Minute (RPM) d) Option (a) and (b)

Last Answer : Plant Energy Performance (PEP)

is the measure of whether a plant is now using more or less energy to manufacture its product than it did in the past. a) Total Dissolved Solids (TDS) b) Plant Energy Performance (PEP) c) Revolutions Per Minute (RPM) d) Option (a) and (b)

Description : is the measure of whether a plant is now using more or less energy to manufacture its product than it did in the past. a) Total Dissolved Solids (TDS) b) Plant Energy Performance (PEP) c) Revolutions Per Minute (RPM) d) Option (a) and (b)

Last Answer : Plant Energy Performance (PEP)

80386 support which type of descriptor table from the following? a) TDS b) ADS c) GDS d) MDS

Description : 80386 support which type of descriptor table from the following? a) TDS b) ADS c) GDS d) MDS

Last Answer : c) GDS

The concentration of Total Dissolved Solids (TDS) in drinking water should not exceed (A) 500 mg/L (B) 400 mg/L (C) 300 mg/L (D) 200 mg/L

Description : The concentration of Total Dissolved Solids (TDS) in drinking water should not exceed (A) 500 mg/L (B) 400 mg/L (C) 300 mg/L (D) 200 mg/L

Last Answer : (A) 500 mg/L

In case of a reversible process (following pvn = constant), work obtained for trebling the volume (v1 = 1 m3 and v23 m3) is maximum, when the value of 'n' is (A) 0 (B) 1 (C) y = 1.44 (D) 1.66

Description : In case of a reversible process (following pvn = constant), work obtained for trebling the volume (v1 = 1 m3 and v23 m3) is maximum, when the value of 'n' is (A) 0 (B) 1 (C) y = 1.44 (D) 1.66

Last Answer : (A) 0

For equilibrium process (i.e. reversible) in an isolated system (A) ds = 0 (B) ds < 0 (C) ds > 0 (D) ds = Constant

Description : For equilibrium process (i.e. reversible) in an isolated system (A) ds = 0 (B) ds < 0 (C) ds > 0 (D) ds = Constant

Last Answer : (A) ds = 0

In the equation, PVn = Constant, if the value of n = 0, then it represents a reversible __________ process. (A) Isobaric (B) Isothermal (C) Isentropic (D) Isometric

Description : In the equation, PVn = Constant, if the value of n = 0, then it represents a reversible __________ process. (A) Isobaric (B) Isothermal (C) Isentropic (D) Isometric

Last Answer : (A) Isobaric

For a reversible process involving only pressure-volume work (A) (dF)T, p < 0 (B) (dF)T, p > 0 (C) (dF)T, p = 0 (D) (dA)T, v < 0

Description : For a reversible process involving only pressure-volume work (A) (dF)T, p < 0 (B) (dF)T, p > 0 (C) (dF)T, p = 0 (D) (dA)T, v < 0

Last Answer : (C) (dF)T, p = 0

How does an adiabatic process compare to an isentropic process?  A. Adiabatic heat transfer is not equal to zero; isentropic heat transfer is zero  B. Both heat transfer = 0; isentropic: reversible  C. Adiabatic heat transfer = 0; isentropic: heat transfer is not equal to zero  D. Both heat transfer is not equal to zero; isentropic: irreversible

Description : How does an adiabatic process compare to an isentropic process?  A. Adiabatic heat transfer is not equal to zero; isentropic heat transfer is zero  B. Both heat transfer = 0; isentropic: reversible  ... is not equal to zero  D. Both heat transfer is not equal to zero; isentropic: irreversible

Last Answer : Both heat transfer = 0; isentropic: reversible

An isentropic process is the one, in which (A) pv = constant (B) pv r= constant (C) pv r = constant, and process is reversible (D) None of these

Description : An isentropic process is the one, in which (A) pv = constant (B) pv r= constant (C) pv r = constant, and process is reversible (D) None of these

Last Answer : (C) pv r = constant, and process is reversible

Which of the following is not correct for a reversible adiabatic process? (A) TV γ-1 = constant (B) p 1-γ .T Y = constant (C) PV γ = constant (D) None of these

Description : Which of the following is not correct for a reversible adiabatic process? (A) TV γ-1 = constant (B) p 1-γ .T Y = constant (C) PV γ = constant (D) None of these

Last Answer : (D) None of these

When a gas in a vessel expands, its internal energy decreases. The process involved is (A) Reversible (B) Irreversible (C) Isothermal (D) Adiabatic

Description : When a gas in a vessel expands, its internal energy decreases. The process involved is (A) Reversible (B) Irreversible (C) Isothermal (D) Adiabatic

Last Answer : (A) Reversible

In polytropic process (PV n = constant), if n = 1; it means a/an __________ process. (A) Adiabatic (B) Reversible (C) Isothermal (D) None of these

Description : In polytropic process (PV n = constant), if n = 1; it means a/an __________ process. (A) Adiabatic (B) Reversible (C) Isothermal (D) None of these

Last Answer : (C) Isothermal

. The entropy change in a reversible isothermal process, when an ideal gas expands to four times its initial volume is (A) R loge 4 (B) R log10 4 (C) Cv log10 4 (D) Cv loge 4

Description : . The entropy change in a reversible isothermal process, when an ideal gas expands to four times its initial volume is (A) R loge 4 (B) R log10 4 (C) Cv log10 4 (D) Cv loge 4

Last Answer : (A) R loge 4

. The entropy change in a reversible isothermal process, when an ideal gas expands to four times its initial volume is (A) R loge 4 (B) R log10 4 (C) Cv log10 4 (D) Cv loge 4

Description : . The entropy change in a reversible isothermal process, when an ideal gas expands to four times its initial volume is (A) R loge 4 (B) R log10 4 (C) Cv log10 4 (D) Cv loge 4

Last Answer : (A) R loge 4

Which of the following has the minimum value of COP for a given refrigeration effect? (A) Reverse Carnot cycle (B) Ordinary vapour-compression cycle (C) Vapour-compression process with a reversible expansion engine (D) Air refrigeration cycle

Description : Which of the following has the minimum value of COP for a given refrigeration effect? (A) Reverse Carnot cycle (B) Ordinary vapour-compression cycle (C) Vapour-compression process with a reversible expansion engine (D) Air refrigeration cycle

Last Answer : (D) Air refrigeration cycle

Pick out the correct statement. (A) The available energy in an isolated system for all irreversible (real) processes decreases (B) The efficiency of a Carnot engine increases, if the sink temperature is decreased (C) The reversible work for compression in non-flow process under isothermal condition is the change in Helmholtz free energy (D) All (A), (B) and (C)

Description : Pick out the correct statement. (A) The available energy in an isolated system for all irreversible (real) processes decreases (B) The efficiency of a Carnot engine increases, if the sink temperature is decreased ... condition is the change in Helmholtz free energy (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Specific heat of a gas for a reversible adiabatic process is (A) Negative (B) Zero (C) Infinity (D) None of these

Description : Specific heat of a gas for a reversible adiabatic process is (A) Negative (B) Zero (C) Infinity (D) None of these

Last Answer : (B) Zero

For a constant pressure reversible process, the enthalpy change (ΔH) of the system is (A) Cv.dT (B) Cp.dT (C) ∫ Cp.dT (D) ∫ Cv.dT

Description : For a constant pressure reversible process, the enthalpy change (ΔH) of the system is (A) Cv.dT (B) Cp.dT (C) ∫ Cp.dT (D) ∫ Cv.dT

Last Answer : (C) ∫ Cp.dT

What happens in a reversible adiabatic expansion process? (A) Heating takes place (B) Cooling takes place (C) Pressure is constant (D) Temperature is constant

Description : What happens in a reversible adiabatic expansion process? (A) Heating takes place (B) Cooling takes place (C) Pressure is constant (D) Temperature is constant

Last Answer : (B) Cooling takes place

PVy = constant, holds good for an isentropic process, which is (A) Reversible and isothermal (B) Isothermal and irreversible (C) Reversible and adiabatic (D) Adiabatic and irreversible

Description : PVy = constant, holds good for an isentropic process, which is (A) Reversible and isothermal (B) Isothermal and irreversible (C) Reversible and adiabatic (D) Adiabatic and irreversible

Last Answer : C) Reversible and adiabatic

Entropy change in case of reversible adiabatic process is (A) Minimum (B) Zero (C) Maximum (D) Indeterminate

Description : Entropy change in case of reversible adiabatic process is (A) Minimum (B) Zero (C) Maximum (D) Indeterminate

Last Answer : (B) Zero

In the equation, PVn = constant, if the value of n = ± ∞, then it represents a reversible __________ process. (A) Adiabatic (B) Isometric (C) Isentropic (D) Isothermal

Description : In the equation, PVn = constant, if the value of n = ± ∞, then it represents a reversible __________ process. (A) Adiabatic (B) Isometric (C) Isentropic (D) Isothermal

Last Answer : (B) Isometric

Pick out the wrong statement: (A) The expansion of a gas in vacuum is an irreversible process (B) An isometric process is a constant pressure process (C) Entropy change for a reversible adiabatic process is zero (D) Free energy change for a spontaneous process is negative

Description : Pick out the wrong statement: (A) The expansion of a gas in vacuum is an irreversible process (B) An isometric process is a constant pressure process (C) Entropy change for a reversible adiabatic process is zero (D) Free energy change for a spontaneous process is negative

Last Answer : (B) An isometric process is a constant pressure process

An irreversible process (A) Is the analog of linear frictionless motion in machines (B) Is an idealised visualisation of behaviour of a system (C) Yields the maximum amount of work (D) Yields an amount of work less than that of a reversible process

Description : An irreversible process (A) Is the analog of linear frictionless motion in machines (B) Is an idealised visualisation of behaviour of a system (C) Yields the maximum amount of work (D) Yields an amount of work less than that of a reversible process

Last Answer : (D) Yields an amount of work less than that of a reversible process

Throttling process is a/an __________ process. (A) Reversible and isothermal (B) Irreversible and constant enthalpy (C) Reversible and constant entropy (D) Reversible and constant enthalpy

Description : Throttling process is a/an __________ process. (A) Reversible and isothermal (B) Irreversible and constant enthalpy (C) Reversible and constant entropy (D) Reversible and constant enthalpy

Last Answer : (B) Irreversible and constant enthalpy

The expression for the work done for a reversible polytropic process can be used to obtain the expression for work done for all processes, except reversible __________ process. (A) Isobaric (B) Isothermal (C) Adiabatic (D) None of these

Description : The expression for the work done for a reversible polytropic process can be used to obtain the expression for work done for all processes, except reversible __________ process. (A) Isobaric (B) Isothermal (C) Adiabatic (D) None of these

Last Answer : (B) Isothermal

A system undergoes a change from a given initial state to a given final state either by an irreversible process or by a reversible process, then (where, Δ S1 and Δ SR are the entropy changes of the system for the irreversible and reversible processes respectively) (A) Δ S1is always < Δ SR (B) Δ S1is sometimes > Δ SR (C) Δ S1is always > Δ SR (D) Δ S1is always = Δ SR

Description : A system undergoes a change from a given initial state to a given final state either by an irreversible process or by a reversible process, then (where, Δ S1 and Δ SR are the entropy changes of the system for the ... S1is sometimes > Δ SR (C) Δ S1is always > Δ SR (D) Δ S1is always = Δ SR

Last Answer : (C) Δ S1is always > Δ SR