In a solid arch, shear force acts (A) Vertically upwards (B) Along the axis of the arch (C) Perpendicular to the axis of arch (D) Tangentially to the arch

In a solid arch, shear force acts
(A) Vertically upwards
(B) Along the axis of the arch
(C) Perpendicular to the axis of arch
(D) Tangentially to the arch
by

1 Answer

Answer :

(C) Perpendicular to the axis of arch
by

Related questions

The resultant of all normal pressures acts (A) At C.G. of body (B) At center of pressure (C) Vertically upwards (D) At metacentre

Description : The resultant of all normal pressures acts (A) At C.G. of body (B) At center of pressure (C) Vertically upwards (D) At metacentre

Last Answer : Answer: Option C

What is the shear stress acting along the neutral axis of triangular beam section, with base 60 mm and height 150 mm, when shear force of 30 kN acts? a. 15.36 N/mm2 b. 10.6 N/mm2 c. 8.88 N/mm2 d. Insufficient data

Description : What is the shear stress acting along the neutral axis of triangular beam section, with base 60 mm and height 150 mm, when shear force of 30 kN acts? a. 15.36 N/mm2 b. 10.6 N/mm2 c. 8.88 N/mm2 d. Insufficient data

Last Answer : c. 8.88 N/mm2

Pick up the correct statement from the following: Method of sawing timber (A) Tangentially to annual rings, is known as tangential method (B) In four quarters such that each board cuts annual rings at angles not less than 45°, is known as quarter sawing method (C) Cut out of quarter logs, parallel to the medullary rays and perpendicular to annual rings, is known as radial sawing (D) All the above

Description : Pick up the correct statement from the following: Method of sawing timber (A) Tangentially to annual rings, is known as tangential method (B) In four quarters such that each board cuts annual rings ... medullary rays and perpendicular to annual rings, is known as radial sawing (D) All the above

Last Answer : Answer: Option D

On the ladder resting on the ground and leaning against a smooth vertical wall, the force of friction will be (A) Downwards at its upper end (B) Upwards at its upper end (C) Perpendicular to the wall at its upper end (D) Zero at its upper end

Description : On the ladder resting on the ground and leaning against a smooth vertical wall, the force of  friction will be  (A) Downwards at its upper end  (B) Upwards at its upper end  (C) Perpendicular to the wall at its upper end  (D) Zero at its upper end 

Last Answer : (D) Zero at its upper end 

An arch may be subjected to (A) Shear and axial force (B) Bending moment and shear force (C) Bending moment and axial force (D) Thrust, shear force and bending moment

Description : An arch may be subjected to  (A) Shear and axial force  (B) Bending moment and shear force  (C) Bending moment and axial force  (D) Thrust, shear force and bending moment 

Last Answer : (D) Thrust, shear force and bending moment 

In a three hinged arch, the shear force is usually (A) Maximum at crown(B) Maximum at springing (C) Maximum at quarter points (D) Varies with slope

Description : In a three hinged arch, the shear force is usually (A) Maximum at crown (B) Maximum at springing (C) Maximum at quarter points (D) Varies with slope

Last Answer : (B) Maximum at springing

If a three hinged parabolic arch carries a uniformly distributed load on its entire span, every section of the arch resists. (A) Compressive force (B) Tensile force (C) Shear force (D) Bending moment

Description : If a three hinged parabolic arch carries a uniformly distributed load on its entire span, every section of the arch resists. (A) Compressive force (B) Tensile force (C) Shear force (D) Bending moment

Last Answer : (A) Compressive force

When a section is subjected to two equal and opposite forces tangentially to the section, the stress produced is known as (a) Tensile stress (b) Lateral stress (c) Shear stress (d) No stress

Description : When a section is subjected to two equal and opposite forces tangentially to the section, the stress produced is known as (a) Tensile stress (b) Lateral stress (c) Shear stress (d) No stress

Last Answer : (c) Shear stress

n which direction does the accelerating force acts? a) Opposite to the motion b) Along the motion c) Perpendicular to motion d) Variable

Description : n which direction does the accelerating force acts? a) Opposite to the motion b) Along the motion c) Perpendicular to motion d) Variable

Last Answer : b) Along the motion

In which direction does the damping force acts? a) Opposite to the motion b) Along the motion c) Perpendicular to motion d) Variable

Description : In which direction does the damping force acts? a) Opposite to the motion b) Along the motion c) Perpendicular to motion d) Variable

Last Answer : a) Opposite to the motion

For a two-hinged arch, if one of the supports settles down vertically, then the horizontal thrust (A) Is increased (B) Is decreased (C) Remains unchanged (D) Becomes zero

Description : For a two-hinged arch, if one of the supports settles down vertically, then the horizontal thrust (A) Is increased (B) Is decreased (C) Remains unchanged (D) Becomes zero

Last Answer : (C) Remains unchanged

The line of action of the buoyant force acts through the (A) Centroid of the volume of fluid vertically above the body (B) Centre of the volume of floating body (C) Center of gravity of any submerged body (D) Centroid of the displaced volume of fluid

Description : The line of action of the buoyant force acts through the (A) Centroid of the volume of fluid vertically above the body (B) Centre of the volume of floating body (C) Center of gravity of any submerged body (D) Centroid of the displaced volume of fluid

Last Answer : Answer: Option D

The line of action of the buoyant force acts through the Centroid of the (A) Submerged body (B) Volume of the floating body (C) Volume of the fluid vertically above the body (D) Displaced volume of the fluid

Description : The line of action of the buoyant force acts through the Centroid of the (A) Submerged body (B) Volume of the floating body (C) Volume of the fluid vertically above the body (D) Displaced volume of the fluid

Last Answer : Answer: Option D

A bullet is fired vertically upwards with a velocity of 2200 ft/s. Bullet ascends to a height of a.56,900 ft b.107 dynes c.75,000 ft d.48.300 ft e.65,800 ft

Description : A bullet is fired vertically upwards with a velocity of 2200 ft/s. Bullet ascends to a height of a.56,900 ft b.107 dynes c.75,000 ft d.48.300 ft e.65,800 ft

Last Answer : c. 75,000 ft

A stone of wight 100 kg is thrown vertically upwards by a man of height y = 1.8 m with an initial velocity of 20 m/sec. The maximum height to which it will rise would be a.22.2 m b.26 m c.15.1 m d.20.2 m e.10 m

Description : A stone of wight 100 kg is thrown vertically upwards by a man of height y = 1.8 m with an initial velocity of 20 m/sec. The maximum height to which it will rise would be a.22.2 m b.26 m c.15.1 m d.20.2 m e.10 m

Last Answer : a. 22.2 m

A ball weighing 250 gm is thrown vertically upwards with a velocity of 980 cm/sec. The time that the ball will take to return back to earth would be a.1 sec b.4 sec c.2 sec d.5 sec e.3 sec

Description : A ball weighing 250 gm is thrown vertically upwards with a velocity of 980 cm/sec. The time that the ball will take to return back to earth would be a.1 sec b.4 sec c.2 sec d.5 sec e.3 sec

Last Answer : c. 2 sec

A stone is thrown vertically upwards from the ground with a velocity 15 m/s. At the same instant a ball is dropped from a point directly

Description : A stone is thrown vertically upwards from the ground with a velocity 15 m/s. At the same instant a ball is dropped from a point directly

Last Answer : A stone is thrown vertically upwards from the ground with a velocity 15 m/s. At the same instant a ball ... Use g = 10 m/s2 for ease of calculation).

A ball thrown vertically upwards from a point P on earth reaches a point Q and returns back to earth striking at a point R.

Description : A ball thrown vertically upwards from a point P on earth reaches a point Q and returns back to earth striking at a point R.

Last Answer : A ball thrown vertically upwards from a point P on earth reaches a point Q and returns back to ... the motion of the ball (Neglect air resistance).

A man standing on a edge of a cliff throws a stone vertically upwards with a certain speed. He then throws another stone downwards with the same speed. Find the ratio of the speeds of the two stones when they hit the ground. (1) 1 : 1 (2) 1 : 2 (3) 1 : 4 (4) Cannot be found from the given information.

Description : A man standing on a edge of a cliff throws a stone vertically upwards with a certain speed. He then throws another stone downwards with the same speed. Find the ratio of the speeds of the two stones when they hit the ground ... : 1 (2) 1 : 2 (3) 1 : 4 (4) Cannot be found from the given information.

Last Answer : (1) 1 : 1 Explanation: The stone which is throws upward will have the same velocity of u at the point of its original position when it is falling down. Another stone is thrown downwards with u. So ... will hit the ground with same velocity. So the ratio between the speeds of two stones will be 1:1

A ball is thrown vertically upwards from the ground with a speed of 80 feet/second. In the English system of units, what is the magnitude and direction of the acceleration of the ball?

Description : A ball is thrown vertically upwards from the ground with a speed of 80 feet/second. In the English system of units, what is the magnitude and direction of the acceleration of the ball? 

Last Answer : ANSWER: 32 FEET PER SECOND SQUARED DOWN or TOWARDS THE EARTH  

A man standing on a edge of a cliff throws a stone vertically upwards with a certain speed. He then throws another stone downwards with the same speed. Find the ratio of the speeds of the two stones when they hit the ground. (1) 1 : 1 (2) 1 : 2 (3) 1 : 4 (4) Cannot be found from the given information.

Description : A man standing on a edge of a cliff throws a stone vertically upwards with a certain speed. He then throws another stone downwards with the same speed. Find the ratio of the speeds of the two stones when they hit the ground ... : 1 (2) 1 : 2 (3) 1 : 4 (4) Cannot be found from the given information.

Last Answer :  1 : 1

The graphical representation of variation of axial load on y axis and position of cross section along x axis is called as _____ (a) Bending moment diagram (b) Shear force diagram (c) Stress-strain diagram (d) Trust diagram

Description : The graphical representation of variation of axial load on y axis and position of cross section along x axis is called as _____ (a) Bending moment diagram (b) Shear force diagram (c) Stress-strain diagram (d) Trust diagram

Last Answer : (d) Trust diagram

Least force required to draw a body up the inclined plane is W sin (plane inclination + friction angle) applied in the direction (A) Along the plane (B) Horizontally (C) Vertically(D) At an angle equal to the angle of friction to the inclined plane

Description : Least force required to draw a body up the inclined plane is W sin (plane inclination + friction  angle) applied in the direction  (A) Along the plane  (B) Horizontally  (C) Vertically  (D) At an angle equal to the angle of friction to the inclined plane 

Last Answer : (D) At an angle equal to the angle of friction to the inclined plane 

Along the principal plan subjected to maximum principal stress (A) Maximum shear stress acts (B) Minimum shear stress acts(C) No shear stress acts (D) None of these

Description : Along the principal plan subjected to maximum principal stress (A) Maximum shear stress acts (B) Minimum shear stress acts (C) No shear stress acts (D) None of these

Last Answer : (C) No shear stress acts

A beam is said to be of uniform strength, if (A) B.M. is same throughout the beam (B) Shear stress is same throughout the beam (C) Deflection is same throughout the beam (D) Bending stress is same at every section along its longitudinal axis

Description : A beam is said to be of uniform strength, if (A) B.M. is same throughout the beam (B) Shear stress is same throughout the beam (C) Deflection is same throughout the beam (D) Bending stress is same at every section along its longitudinal axis

Last Answer : (D) Bending stress is same at every section along its longitudinal axis

The normal stress is perpendicular to the area under considerations, while the shear stress acts over the area. a) True b) False

Description : The normal stress is perpendicular to the area under considerations, while the shear stress acts over the area. a) True b) False

Last Answer : a) True

Which of the following formulae is used to calculate tangential stress, when a member is subjected to stress in mutually perpendicular axis and accompanied by a shear stress? a. [(σ x – σ y )/2 ]sin θ – τ cos 2θ b. [(σ x – σ y )/2 ]– τ cos 2θ c. [(σ x – σ y )/2 ]sin θ – τ 2 cos θ d. None of the above

Description : Which of the following formulae is used to calculate tangential stress, when a member is subjected to stress in mutually perpendicular axis and accompanied by a shear stress? a. [(σ x - σ y )/2 ]sin θ - τ cos 2θ b. [(σ x - ... τ cos 2θ c. [(σ x - σ y )/2 ]sin θ - τ 2 cos θ d. None of the above

Last Answer : c. [(σ x – σ y )/2 ]sin θ – τ 2 cos θ

The maximum magnitude of shear stress due to shear force F on a rectangular section of area A at the neutral axis, is (A) F/A (B) F/2A (C) 3F/2A (D) 2F/3A

Description : The maximum magnitude of shear stress due to shear force F on a rectangular section of area A at  the neutral axis, is  (A) F/A (B) F/2A (C) 3F/2A (D) 2F/3A

Last Answer : (C) 3F/2A

If is the shear force at a section of an I-joist, having web depth and moment of inertia about its neutral axis, the difference between the maximum and mean shear stresses in the web is, (A) Sd²/8I (B) Sd²/12I (C) Sd²/16I(D) Sd²/24I

Description : If is the shear force at a section of an I-joist, having web depth and moment of inertia about its neutral axis, the difference between the maximum and mean shear stresses in the web is, (A) Sd²/8I (B) Sd²/12I (C) Sd²/16I (D) Sd²/24I

Last Answer : (D) Sd²/24I

The shear force on a simply supported beam is proportional to (A) Displacement of the neutral axis (B) Sum of the forces (C) Sum of the transverse forces (D) Algebraic sum of the transverse forces of the section

Description : The shear force on a simply supported beam is proportional to (A) Displacement of the neutral axis (B) Sum of the forces (C) Sum of the transverse forces (D) Algebraic sum of the transverse forces of the section

Last Answer : (D) Algebraic sum of the transverse forces of the section

Pick up the incorrect statement from the following. The intensity of horizontal shear stress at the elemental part of a beam section, is directly proportional to (A) Shear force (B) Area of the section (C) Distance of the C.G. of the area from its neutral axis (D) Moment of the beam section about its neutral axis

Description : Pick up the incorrect statement from the following. The intensity of horizontal shear stress at the elemental part of a beam section, is directly proportional to (A) Shear force (B) Area of the section ... . of the area from its neutral axis (D) Moment of the beam section about its neutral axis

Last Answer : Answer: Option D

On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be (A) Towards the wall at its upper end (B) Away from the wall at its upper end (C) Upwards at its upper end (D) Downwards at its upper end

Description : On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be (A) Towards the wall at its upper end (B) Away from the wall at its upper end (C) Upwards at its upper end (D) Downwards at its upper end

Last Answer : (C) Upwards at its upper end

In modeling of a tabulated cylinder, the plane of the curve is _______ a.along the curve b.normal to the curve c.along the axis of the cylinder d.perpendicular to the axis of the cylinder

Description : In modeling of a tabulated cylinder, the plane of the curve is _______ a.along the curve b.normal to the curve c.along the axis of the cylinder d.perpendicular to the axis of the cylinder

Last Answer : d.perpendicular to the axis of the cylinder

A proton is moving in a uniform magnetic field B in a circular path of radius a in a direction perpendicular to Z- axis along which field B exists. Ca

Description : A proton is moving in a uniform magnetic field B in a circular path of radius a in a direction perpendicular to Z- axis along which field B exists. Ca

Last Answer : A proton is moving in a uniform magnetic field B in a circular path of radius a in a direction perpendicular to Z- ... 2)a` C. `a^(2) eB` D. `aeB`

Pick up the correct statement from the following: (A) The tangent screw enables to give small movement under conditions of smooth and positive control (B) Standing on the tripod is the levelling head or trib arch (C) The levelling screws are used to tilt the instrument so that its rotation axis is truly vertical (D) All the above

Description : Pick up the correct statement from the following: (A) The tangent screw enables to give small movement under conditions of smooth and positive control (B) Standing on the tripod is the levelling head ... used to tilt the instrument so that its rotation axis is truly vertical (D) All the above

Last Answer : (D) All the above

In a perfect prismatic compass (A) Magnetic axis and geometric axis of the needle coincide (B) Ends of the needle and pivot are in same vertical and horizontal planes (C) Pivot is vertically over the centre of the graduated circle (D) All the above

Description : In a perfect prismatic compass (A) Magnetic axis and geometric axis of the needle coincide (B) Ends of the needle and pivot are in same vertical and horizontal planes (C) Pivot is vertically over the centre of the graduated circle (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) The lines of sight while observing back sight and fore sight lie in the same horizontal plane (B) The staff readings are measurements made vertically downwards from a horizontal plane (C) The horizontal plane with reference to which staff readings are taken, coincides with the level surface through the telescope axis (D) All the above

Description : Pick up the correct statement from the following: (A) The lines of sight while observing back sight and fore sight lie in the same horizontal plane (B) The staff readings are measurements made ... readings are taken, coincides with the level surface through the telescope axis (D) All the above

Last Answer : (D) All the above

The depth of centre of pressure (h) for a vertically immersed surface from the liquid surface is given by (where IG = Moment of inertia of the immersed surface about horizontal axis through its centre of gravity, A = Area of immersed surface, and x = Depth of centre of gravity of the immersed surface from the liquid surface) (A) (IG/ ) - (B) (IG/ ) - (C) ( /IG) + (D) (IG/ ) +

Description : The depth of centre of pressure (h) for a vertically immersed surface from the liquid surface is given by (where IG = Moment of inertia of the immersed surface about horizontal axis through its centre of gravity, A = Area of immersed surface, ... (IG/ ) - (B) (IG/ ) - (C) ( /IG) + (D) (IG/ ) +

Last Answer : Answer: Option D

If the shear force along a section of a beam is zero, the bending moment at the section is (A) Zero (B) Maximum (C) Minimum (D) Average of maximum-minimum

Description : If the shear force along a section of a beam is zero, the bending moment at the section is  (A) Zero  (B) Maximum  (C) Minimum  (D) Average of maximum-minimum 

Last Answer : (B) Maximum 

What is the shear stress acting along the neutral axis, over a triangular section? a. 2.66 (S/bh) b. 1.5 (S/bh) c. 0.375 (S/bh) d. None of the above

Description : What is the shear stress acting along the neutral axis, over a triangular section? a. 2.66 (S/bh) b. 1.5 (S/bh) c. 0.375 (S/bh) d. None of the above

Last Answer : a. 2.66 (S/bh)

Shear force in a beam is (a) Parallel to the length (b) Perpendicular to the length (c) Neither parallel nor perpendicular to the length (d) None

Description : Shear force in a beam is (a) Parallel to the length (b) Perpendicular to the length (c) Neither parallel nor perpendicular to the length (d) None

Last Answer : (b) Perpendicular to the length

The stress in the wall of a cylinder in a direction normal to its longitudinal axis, due to a force acting along the circumference, is known as (A) Yield stress(B) Longitudinal stress (C) Hoop stress (D) Circumferential stress

Description : The stress in the wall of a cylinder in a direction normal to its longitudinal axis, due to a force  acting along the circumference, is known as  (A) Yield stress  (B) Longitudinal stress  (C) Hoop stress  (D) Circumferential stress 

Last Answer : (C) Hoop stress

In which case power required would be more a.In lifting up a weight of 100 kg at a velocity of 3 m/sec but accelerating upwards at 0.5 m/sec b.In lowering a weight of 100 kg along an a inclined plane at an angle of 45? with c.In lifting up a weight of 100 kg at a constant speed of 3 m/sec d.In lowering the weight at a constant speed of 3 m/sec e.In lowering the weight at a velocity of 3 m/sec and acceleration of 1 m/sec2

Description : In which case power required would be more a.In lifting up a weight of 100 kg at a velocity of 3 m/sec but accelerating upwards at 0.5 m/sec b.In lowering a weight of 100 kg along an a inclined plane ... speed of 3 m/sec e.In lowering the weight at a velocity of 3 m/sec and acceleration of 1 m/sec2

Last Answer : a. In lifting up a weight of 100 kg at a velocity of 3 m/sec but accelerating upwards at 0.5 m/sec

A radial bearing supports the load that acts along the axis of the shaft. a) True b) False

Description : A radial bearing supports the load that acts along the axis of the shaft. a) True b) False

Last Answer : b) False

Assertion When a charged particle moves perpendicular to a uniform magnetic field then its momentum remains constant. Reason Magnetic force acts perpe

Description : Assertion When a charged particle moves perpendicular to a uniform magnetic field then its momentum remains constant. Reason Magnetic force acts perpe

Last Answer : Assertion When a charged particle moves perpendicular to a uniform magnetic field then its momentum ... Assertion is false but Reason is true.

The torque produced by a DC motor armature is the product of the force acting at the armature surface multiplied by _____________. A. work done by the armature in one revolution B. effective armature diameter at which the force acts C. maximum moment arm at the center of rotation of the armature D. perpendicular distance to its center of rotation

Description : The torque produced by a DC motor armature is the product of the force acting at the armature surface multiplied by _____________. A. work done by the armature in one revolution B. effective ... arm at the center of rotation of the armature D. perpendicular distance to its center of rotation

Last Answer : Answer: D

______ is the perpendicular distance between point of application of force and axis of rotation. (1) Moment arm (2) Moment of Inertia (3) Altitude (4) Base

Description : ______ is the perpendicular distance between point of application of force and axis of rotation. (1) Moment arm (2) Moment of Inertia (3) Altitude (4) Base

Last Answer : (1) Moment arm Explanation: The magnitude of the moment of force acting about a point or axis is directly proportional to the distance of the force from the point or axis.

Moment of force depends upon A. magnitude of force B. perpendicular distance of force from pivot C. both A and B D. axis of rotation

Description : Moment of force depends upon A. magnitude of force B. perpendicular distance of force from pivot C. both A and B D. axis of rotation

Last Answer : both A and B

While rotating the theodolite in the horizontal plane, the bubble of the bubble tube takes up the same position in its tube, it indicates (A) The rotation axis is vertical (B) The trunnion axis is horizontal (C) The line of collimation is perpendicular to vertical axis (D) None of the above

Description : While rotating the theodolite in the horizontal plane, the bubble of the bubble tube takes up the  same position in its tube, it indicates  (A) The rotation axis is vertical  (B) The trunnion ... (C) The line of collimation is perpendicular to vertical axis  (D) None of the above

Last Answer : (A) The rotation axis is vertical