The maximum stress intensity due to a suddenly applied load is x-times the stress intensity produced by the load of the same magnitude applied gradually. The value of x is (A) 1 (B) 2 (C) 3 (D) 1/2

The maximum stress intensity due to a suddenly applied load is x-times the stress intensity
produced by the load of the same magnitude applied gradually. The value of x is
(A) 1
(B) 2
(C) 3
(D) 1/2
by

1 Answer

Answer :

(B) 2
by

Related questions

Stress under suddenly applied load is (a) Three times than the gradually applied load (b) equal to the that due to gradually applied load (c) Less than that due to gradually applied load (d) none

Description : Stress under suddenly applied load is (a) Three times than the gradually applied load (b) equal to the that due to gradually applied load (c) Less than that due to gradually applied load (d) none

Last Answer : (d) none

The ratio of the stresses produced by a suddenly applied load and by a gradually applied load on a bar, is (A) 1/4 (B) 1/2 (C) 1 (D) 2

Description : The ratio of the stresses produced by a suddenly applied load and by a gradually applied load on a  bar, is  (A) 1/4  (B) 1/2  (C) 1  (D) 2 

Last Answer : (D) 2 

In the strain energy method of slope and deflection ,load is applied a. gradually b.suddenly c.with an impact. d.None.

Description : In the strain energy method of slope and deflection ,load is applied a. gradually b.suddenly c.with an impact. d.None.

Last Answer : c.with an impact.

Gradually applied static loads do not change with time their (A) Magnitude (B) Direction (C) Point of application (D) All the above

Description : Gradually applied static loads do not change with time their  (A) Magnitude  (B) Direction  (C) Point of application  (D) All the above

Last Answer : (D) All the above

Magnitude of shear stress induced in a shaft due to applied torque varies from a. Maximum at centre to zero at circumference. b. Maximum at centre to minimum (not-zero) at circumference. c. Zero at centre to maximum at circumference. d. Minimum (not zero) at centre to maximum at circumference.

Description : Magnitude of shear stress induced in a shaft due to applied torque varies from a. Maximum at centre to zero at circumference. b. Maximum at centre to minimum (not-zero) at circumference. c. Zero at centre to maximum at circumference. d. Minimum (not zero) at centre to maximum at circumference.

Last Answer : c. Zero at centre to maximum at circumference.

A bar L metre long and having its area of cross-section A, is subjected to a gradually applied tensile load W. The strain energy stored in the bar is (A) WL/2AE (B) WL/AE (C) W²L/AE (D) W²L/2AE

Description : A bar L metre long and having its area of cross-section A, is subjected to a gradually applied tensile  load W. The strain energy stored in the bar is  (A) WL/2AE (B) WL/AE (C) W²L/AE (D) W²L/2AE

Last Answer : (D) W²L/2AE

In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net settlement (i.e. total settlement minus rebound) per tonne of test load should not exceed (A) 10 mm (B) 15 mm (C) 20 mm (D) 25 mm

Description : In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net ... load should not exceed (A) 10 mm (B) 15 mm (C) 20 mm (D) 25 mm

Last Answer : Answer: Option D

For an electromagnetic wave traveling in a vacuum, if the magnitude of the intensity of the E field is zero, the magnitude of the intensity of the B field is: w) zero x) a negative maximum y) a positive maximum z) the square root of 2 times the positive maximum

Description : For an electromagnetic wave traveling in a vacuum, if the magnitude of the intensity of the E field is zero, the magnitude of the intensity of the B field is: w) zero x) a negative maximum y) a positive maximum z) the square root of 2 times the positive maximum

Last Answer : ANSWER: W -- ZERO

The base of a column is subjected to moment. If the intensity of bearing pressure due to axial load is equal to stress due to moment, then the bearing pressure between the base and the concrete is (a) Uniform compression throughout (b) Zero at one end and compression at the other end (c) Tension at one end and compression at the other end (d) Compression, verying as a parabolic profile

Description : The base of a column is subjected to moment. If the intensity of bearing pressure due to axial load is equal to stress due to moment, then the bearing pressure between the base and the concrete ... Tension at one end and compression at the other end (d) Compression, verying as a parabolic profile

Last Answer : (b) Zero at one end and compression at the other end

The maximum magnitude of shear stress due to shear force F on a rectangular section of area A at the neutral axis, is (A) F/A (B) F/2A (C) 3F/2A (D) 2F/3A

Description : The maximum magnitude of shear stress due to shear force F on a rectangular section of area A at  the neutral axis, is  (A) F/A (B) F/2A (C) 3F/2A (D) 2F/3A

Last Answer : (C) 3F/2A

The hammer blow in pipes occurs when (A) There is excessive leakage in the pipe (B) The pipe bursts under high pressure of fluid(C) The flow of fluid through the pipe is suddenly brought to rest by closing of the valve (D) The flow of fluid through the pipe is gradually brought to rest by closing of the valve

Description : The hammer blow in pipes occurs when (A) There is excessive leakage in the pipe (B) The pipe bursts under high pressure of fluid (C) The flow of fluid through the pipe is suddenly brought to ... valve (D) The flow of fluid through the pipe is gradually brought to rest by closing of the valve

Last Answer : Answer: Option C

When load is applied on concrete pavement (A) Away from edges, the maximum bending moment is negative (B) Away from edges, the maximum bending moment cause compression (C) On the edges, the maximum stress is parallel to the edge of the slab (D) None of these

Description : When load is applied on concrete pavement (A) Away from edges, the maximum bending moment is negative (B) Away from edges, the maximum bending moment cause compression (C) On the edges, the maximum stress is parallel to the edge of the slab (D) None of these

Last Answer : Answer: Option C

In a shaft shear stress intensity at a point is not (A) Directly proportional to the distance from the axis (B) Inversely proportional to the distance from the axis (C) Inversely proportional to the polar moment of inertia (D) Directly proportional to the applied torque

Description : In a shaft shear stress intensity at a point is not (A) Directly proportional to the distance from the axis (B) Inversely proportional to the distance from the axis (C) Inversely proportional to the polar moment of inertia (D) Directly proportional to the applied torque

Last Answer : (B) Inversely proportional to the distance from the axis

A weight of 50 N is suspended from a spring of stiffness 4000N/m and subjected to a harmonic force of magnitude 60N and frequency 60 Hz. what will be the static displacement of the spring due to maximum applied force A. 0.015m B. 0.15 m C. 15 m D. 150m

Description : A weight of 50 N is suspended from a spring of stiffness 4000N/m and subjected to a harmonic force of magnitude 60N and frequency 60 Hz. what will be the static displacement of the spring due to maximum applied force A. 0.015m B. 0.15 m C. 15 m D. 150m

Last Answer : B. 0.15 m

The ratio of the length and diameter of a simply supported uniform circular beam which experiences maximum bending stress equal to tensile stress due to same load at its mid span, is (A) 1/8 (B) 1/4 (C) 1/2 (D) 1/3

Description : The ratio of the length and diameter of a simply supported uniform circular beam which  experiences maximum bending stress equal to tensile stress due to same load at its mid span, is  (A) 1/8  (B) 1/4  (C) 1/2  (D) 1/3 

Last Answer : (C) 1/2 

The ratio of the length and depth of a simply supported rectangular beam which experiences maximum bending stress equal to tensile stress, due to same load at its mid span, is (A) 1/2 (B) 2/3 (C) 1/4 (D) 1/3

Description : The ratio of the length and depth of a simply supported rectangular beam which experiences  maximum bending stress equal to tensile stress, due to same load at its mid span, is  (A) 1/2  (B) 2/3  (C) 1/4  (D) 1/3

Last Answer : (B) 2/3 

If a rectangular beam measuring 10 × 18 × 400 cm carries a uniformly distributed load such that the bending stress developed is 100 kg/cm2 . The intensity of the load per metre length, is (A) 240 kg (B) 250 kg (C) 260 kg (D) 270 kg

Description : If a rectangular beam measuring 10 × 18 × 400 cm carries a uniformly distributed load such that the bending stress developed is 100 kg/cm2 . The intensity of the load per metre length, is (A) 240 kg (B) 250 kg (C) 260 kg (D) 270 kg

Last Answer : (B) 250 kg

A complementary shear stress is equal in magnitude and opposite in rotational tendency of an applied (a) Tensile stress (b) Compressive stress (c) Shear stress (d) None

Description : A complementary shear stress is equal in magnitude and opposite in rotational tendency of an applied (a) Tensile stress (b) Compressive stress (c) Shear stress (d) None

Last Answer : (c) Shear stress

. A fluid which has a linear relationship between the magnitude of applied shear-stress and the resulting rate of deformation is called a/an __________ fluid. (A) Newtonian (B) Non-Newtonian (C) Ideal (D) Incompressible

Description : . A fluid which has a linear relationship between the magnitude of applied shear-stress and the resulting rate of deformation is called a/an __________ fluid. (A) Newtonian (B) Non-Newtonian (C) Ideal (D) Incompressible

Last Answer : (A) Newtonian

A force applied to a rocket gives it an upward acceleration equal to 2 times the acceleration of gravity. The magnitude of the force is equal to: w) the weight of the rocket x) twice the weight of the rocket y) three times the weight of the rocket z) four times the weight of the rocket

Description : A force applied to a rocket gives it an upward acceleration equal to 2 times the acceleration of gravity. The magnitude of the force is equal to: w) the weight of the rocket x) twice the weight of the rocket y) three times the weight of the rocket z) four times the weight of the rocket

Last Answer : ANSWER: Y -- THREE TIMES THE WEIGHT OF THE ROCKET

Have you always grown up gradually, changing a little at a time, or have there been points in your life when you've changed suddenly?

Description : Have you always grown up gradually, changing a little at a time, or have there been points in your life when you've changed suddenly?

Last Answer : answer:Wow: my vote for best question of the month. I don't know how much I want to share in an open forum - but regardless of the intimacy of my, or others' posts here - it certainly was ... , probably unnecessarily but I can't help it. Fortunately, it's never too late to have a happy childhood.

A storm is predicted if atmospheric pressure – (1) Rises suddenly (2) Rises gradually (3) Falls suddenly (4) Falls gradually

Description : A storm is predicted if atmospheric pressure – (1) Rises suddenly (2) Rises gradually (3) Falls suddenly (4) Falls gradually

Last Answer : (3) Falls suddenly Explanation: Atmospheric pressure is basically the weight of air in the atmosphere above the reservoir, so the level of mercury continues to change until the weight of mercury in the ... reduces the weight of air above the reservoir so the mercury level drops to a lower level.

A storm is predicted if atmospheric pressure (1) rises suddenly (2) rises gradually (3) falls suddenly (4) falls gradually

Description : A storm is predicted if atmospheric pressure (1) rises suddenly (2) rises gradually (3) falls suddenly (4) falls gradually

Last Answer :  falls suddenly

When equal and opposite forces applied to a body, tend to elongate it, the stress so produced, is called (A) Shear stress (B) Compressive stress (C) Tensile stress (D) Transverse stress

Description : When equal and opposite forces applied to a body, tend to elongate it, the stress so produced, is called (A) Shear stress (B) Compressive stress (C) Tensile stress (D) Transverse stress

Last Answer : (C) Tensile stress

An R.C.C. beam of 25 cm width and 50 cm effective depth has a clear span of 6 metres and carries a U.D.L. of 3000 kg/m inclusive of its self weight. If the lever arm constant for the section is 0.865, the maximum intensity of shear stress, is (A) 8.3 kg/cm2 (B) 7.6 kg/cm2 (C) 21.5 kg/cm2 (D) 11.4 kg/cm2

Description : An R.C.C. beam of 25 cm width and 50 cm effective depth has a clear span of 6 metres and carries a U.D.L. of 3000 kg/m inclusive of its self weight. If the lever arm constant for the section is 0.865, the maximum intensity ... , is (A) 8.3 kg/cm2 (B) 7.6 kg/cm2 (C) 21.5 kg/cm2 (D) 11.4 kg/cm2

Last Answer : Answer: Option A

A student focuses the image of a candle flame, placed at about 2 m from a convex lens of focal length 10 cm, on a screen. After that he moves gradually the flame towards the lens and each time focuses its image on the screen. (a) In which direction does he move the lens to focus the flame on the screen? (b) What happens to the size of the image of the flame formed on the screen? (c) What difference is seen in the intensity (brightness) of the image of the flame on the screen? (d) What is seen on the screen when the flame is very close (at about 5 cm) to the lens?

Description : A student focuses the image of a candle flame, placed at about 2 m from a convex lens of focal length 10 cm, on a screen. After that he moves gradually the flame towards the lens and each time focuses its ... d) What is seen on the screen when the flame is very close (at about 5 cm) to the lens?

Last Answer : (a) The student moves the lens away from the screen to focus the image because on moving the candle towards the lens, the image distance increases. (b)The size of the image increases when the object ... on the screen. A virtual image is formed behind the candle on the same side of the screen.

The region of the cross-section of a column in which compressive load may be applied without producing any tensile stress, is known as the core of the cross-section. In circular columns the radius of the core, is (A) One-half of the radius (B) One-third of the radius (C) One-quarter of the radius (D) One-fifth of the radius

Description : The region of the cross-section of a column in which compressive load may be applied without producing any tensile stress, is known as the core of the cross-section. In circular columns the radius of the core, ... One-third of the radius (C) One-quarter of the radius (D) One-fifth of the radius

Last Answer : (C) One-quarter of the radius

The range within which a load can be applied on a rectangular column, to avoid any tensile stress, is (A) One-half of the base (B) One-fifth of the base (C) One-fourth of the base (D) One-fifth of the base

Description : The range within which a load can be applied on a rectangular column, to avoid any tensile stress,  is  (A) One-half of the base  (B) One-fifth of the base  (C) One-fourth of the base  (D) One-fifth of the base 

Last Answer : (B) One-fifth of the base 

For keeping the stress wholly compressive the load may be applied on a circular column anywhere within a concentric circle of diameter (A) d/2 (B) d/3 (C) d/4 (D) d/8

Description : For keeping the stress wholly compressive the load may be applied on a circular column anywhere within a concentric circle of diameter (A) d/2 (B) d/3 (C) d/4 (D) d/8

Last Answer : (C) d/4

The magnitude of maximum principal stress is a. Firstly (σ x +σ y )/2+ (1/2)( σ x +σ y ) +4τ 2 ) 5 b. Secondly (σ x +σ y )/2+ (1/2)( σ x -σ y ) 2 +4τ 2 ) 5 c. Thirdly (σ x +σ y )/2+ (1/2)( σ x +σ y ) 2 +4τ 2 ) 5 d. None

Description : The magnitude of maximum principal stress is a. Firstly (σ x +σ y )/2+ (1/2)( σ x +σ y ) +4τ 2 ) 5 b. Secondly (σ x +σ y )/2+ (1/2)( σ x -σ y ) 2 +4τ 2 ) 5 c. Thirdly (σ x +σ y )/2+ (1/2)( σ x +σ y ) 2 +4τ 2 ) 5 d. None

Last Answer : b. Secondly (σ x +σ y )/2+ (1/2)( σ x -σ y ) 2 +4τ 2 ) 5

A simply supported rolled steel joist 8 m long carries a uniformly distributed load over it span so that the maximum bending stress is 75 N/mm². If the slope at the ends is 0.005 radian and the value of E = 0.2 × 106 N/mm2 , the depth of the joist, is (A) 200 mm (B) 250 mm (C) 300 mm (D) 400 mm

Description : A simply supported rolled steel joist 8 m long carries a uniformly distributed load over it span so  that the maximum bending stress is 75 N/mm². If the slope at the ends is 0.005 radian and the  value of E = 0.2 ... joist, is  (A) 200 mm  (B) 250 mm  (C) 300 mm  (D) 400 mm 

Last Answer : (D) 400 mm 

Three capacitors with different capacitances are connected in series. Which of the following statements is TRUE? w) All three of the capacitors have the same potential difference between their plates. x) The magnitude of the charge is the same on all of the capacitor plates. y) The capacitance of the system depends on the voltage applied across the three capacitors.

Description : Three capacitors with different capacitances are connected in series. Which of the following statements is TRUE? w) All three of the capacitors have the same potential difference between their plates. x ... y) The capacitance of the system depends on the voltage applied across the three capacitors.

Last Answer : ANSWER: X -- THE MAGNITUDE OF THE CHARGE IS THE SAME ON ALL OF THE CAPACITOR PLATES

Four wires of the same material and dimensions as under are stretched by a load of same magnitude separately. Which of them will be elongated maximum? (a) wire of 3m length and 1.5 mm diameter (b) wire of 1m length and 2mm diameter (c) wire of 2m length and 2mm diameter (d) wire of 1m length and 1mm diameter

Description : Four wires of the same material and dimensions as under are stretched by a load of same magnitude separately. Which of them will be elongated maximum? (a) wire of 3m length and 1.5 mm diameter (b) ... and 2mm diameter (c) wire of 2m length and 2mm diameter (d) wire of 1m length and 1mm diameter

Last Answer : Ans:(a)

While testing a cast iron beam (2.5 cm × 2.5 cm) in section and a metre long simply supported at the ends failed when a 100 kg weight is applied at the centre. The maximum stress induced is: (A) 960 kg/cm2 (B) 980 kg/cm2 (C) 1000 kg/cm2 (D) 1200 kg/cm2 Answer: Option

Description : While testing a cast iron beam (2.5 cm × 2.5 cm) in section and a metre long simply supported at  the ends failed when a 100 kg weight is applied at the centre. The maximum stress induced is:  (A) 960 kg/cm2 (B) 980 kg/cm2 (C) 1000 kg/cm2 (D) 1200 kg/c

Last Answer : (A) 960 kg/cm

is the pre-stressed force applied to the tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The maximum stress in the beam, subjected to a maximum bending moment , is (A) f = (P/A) + (Z/M) (B) f = (A/P) + (M/Z) (C) f = (P/A) + (M/Z) (D) f = (P/A) + (M/6Z)

Description : is the pre-stressed force applied to the tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The maximum stress in the beam, subjected to a maximum bending moment , is (A) f = (P/A) + (Z/M) ... ) + (M/Z) (C) f = (P/A) + (M/Z) (D) f = (P/A) + (M/6Z)

Last Answer : Answer: Option C

is the pre-stressed force applied to tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The minimum stress on the beam subjected to a maximum bending moment is (A) f = (P/A) - (Z/M) (B) f = (A/P) - (M/Z) (C) f = (P/A) - (M/Z) (D) f = (P/A) - (M/6Z)

Description : is the pre-stressed force applied to tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The minimum stress on the beam subjected to a maximum bending moment is (A) f = (P/A) - (Z/M) (B) f = (A/P) - (M/Z) (C) f = (P/A) - (M/Z) (D) f = (P/A) - (M/6Z)

Last Answer : Answer: Option C

The loss due to relaxation of stress in steel in PSC member depends on 1. Applied stress level 2. Temperature 3. Type of steel (a) 1 and 2 only (b) 2 and 3 only ( c) 1, 2 and 3 (d) 1 and 3 only

Description : The loss due to relaxation of stress in steel in PSC member depends on 1. Applied stress level 2. Temperature 3. Type of steel (a) 1 and 2 only (b) 2 and 3 only ( c) 1, 2 and 3 (d) 1 and 3 only

Last Answer : ( c) 1, 2 and 3

In case of a beam subjected to pure bending a.107 dynes b.the stress intensity in any fibre is proportional to the distance of the fibre from the neutral axis c.the stress intensity in any fibre is proportional to the distance of the fibre from the load carrying end d.the stress intensity in any fibre is uniform e.the nature of stress in any fibre is identical

Description : In case of a beam subjected to pure bending a.107 dynes b.the stress intensity in any fibre is proportional to the distance of the fibre from the neutral axis c.the stress intensity in any fibre is ... d.the stress intensity in any fibre is uniform e.the nature of stress in any fibre is identical

Last Answer : b. the stress intensity in any fibre is proportional to the distance of the fibre from the neutral axis

A capacitor is to be tested with a megohmmeter. If the meter is connected to a shorted capacitor, the meter pointer should _____________. A. immediately swing to the maximum resistance value B. deflect to zero and remain at that position C. swing to a high reading and gradually decrease D. swing to zero then gradually increase with slight pointer movements down scale

Description : A capacitor is to be tested with a megohmmeter. If the meter is connected to a shorted capacitor, the meter pointer should _____________. A. immediately swing to the maximum resistance value ... and gradually decrease D. swing to zero then gradually increase with slight pointer movements down scale

Last Answer : Answer: B

A capacitor can be tested using a megohmmeter or an ohmmeter. If the meter is connected to a shorted capacitor, the meter pointer should _____________. A. immediately swing to the maximum resistance value for the capacitor B. first swing quickly to 'zero', then gradually move up the scale as the capacitor charges C. immediately deflect to and remain at zero D. immediately swing to a high reading and then gradually decrease

Description : A capacitor can be tested using a megohmmeter or an ohmmeter. If the meter is connected to a shorted capacitor, the meter pointer should _____________. A. immediately swing to the maximum resistance ... deflect to and remain at zero D. immediately swing to a high reading and then gradually decrease

Last Answer : Answer: C

The magnitude of maximum shear stress is (a) ± (1/2)[ ((σx –σy) 2 + 4 τ 2 )) 0.5 ] (b) ± (1/2)[ (1/2)((σx –σy) 2 + 4 τ 2 )) 0.5 ] (c) ± (1/2)[ ((1/2)(σx –σy) 2 + 4 τ 2 )) 0.5 ] (d) None

Description : The magnitude of maximum shear stress is (a) ± (1/2)[ ((σx –σy) 2 + 4 τ 2 )) 0.5 ] (b) ± (1/2)[ (1/2)((σx –σy) 2 + 4 τ 2 )) 0.5 ] (c) ± (1/2)[ ((1/2)(σx –σy) 2 + 4 τ 2 )) 0.5 ] (d) None

Last Answer : (a) ± (1/2)[ ((σx –σy) 2 + 4 τ 2 )) 0.5 ]

Consider the following statements: 1. Consolidation time increase with increasing compressibility 2. Consolidation time decreases with increasing permeability. 3. Consolidation time is dependent on the magnitude of stress increase. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. Consolidation time increase with increasing compressibility 2. Consolidation time decreases with increasing permeability. 3. Consolidation time is dependent on the magnitude of stress increase. Which of these ... (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (b) 1 & 2 only

A short column (30 cm × 20 cm) carries a load P1 at 4 cm on one side and another load P2at 8 cm on the other side along a principal section parallel to longer dimension. If the extreme intensity on either side is same, the ratio of P1 to P2 will be (A) 2/3 (B) 3/2 (C) 8/5 (D) 5/8

Description : A short column (30 cm 20 cm) carries a load P1 at 4 cm on one side and another load P2at 8 cm on  the other side along a principal section parallel to longer dimension. If the extreme intensity on  either side is same, the ... to P2 will be  (A) 2/3  (B) 3/2  (C) 8/5  (D) 5/8 

Last Answer : (C) 8/5 

A 300 mm square bearing plate settles by 15 mm in a plate load test on a cohesive soil when the intensity of loading is 0.2 N/mm². The settlement of a prototype shallow footing 1 m square under the same intensity of loading is (A) 15 mm (B) 30 mm (C) 50 mm (D) 167 mm

Description : A 300 mm square bearing plate settles by 15 mm in a plate load test on a cohesive soil when the intensity of loading is 0.2 N/mm². The settlement of a prototype shallow footing 1 m square under the same intensity of loading is (A) 15 mm (B) 30 mm (C) 50 mm (D) 167 mm

Last Answer : (C) 50 mm

A 600 mm square bearing plate settles by 15 mm in plate load test on a cohesion-less soil under an intensity of loading of 0.2 N/ram². The settlement of a prototype shallow footing 1 m square under the same intensity of loading is (A) 15 mm (B) Between 15 mm and 25 mm (C) 25 mm (D) Greater than 25 mm

Description : A 600 mm square bearing plate settles by 15 mm in plate load test on a cohesion-less soil under an intensity of loading of 0.2 N/ram². The settlement of a prototype shallow footing 1 m square under the same intensity of ... (A) 15 mm (B) Between 15 mm and 25 mm (C) 25 mm (D) Greater than 25 mm

Last Answer : Answer: Option B

Pick out the wrong statement. (A) The X-rays cannot be deflected by electric field unlike cathode rays (B) The intensity of X-rays can be measured by ionisation current produced due to the ionisation of gas by X-rays (C) The quality of X-rays can be controlled by varying the anode-cathode voltage (D) Crystal structure of a material can be studied by an electron microscope

Description : Pick out the wrong statement. (A) The X-rays cannot be deflected by electric field unlike cathode rays (B) The intensity of X-rays can be measured by ionisation current produced due to the ... the anode-cathode voltage (D) Crystal structure of a material can be studied by an electron microscope

Last Answer : (C) The quality of X-rays can be controlled by varying the anode-cathode voltage

The magnitude of saturation photo electric current depends upon (a) Frequency (b) Intensity (c) Work function (d) Stopping potential

Description : The magnitude of saturation photo electric current depends upon (a) Frequency (b) Intensity (c) Work function (d) Stopping potential

Last Answer : Ans:(b)

The magnitude of the conduction current density for a magnetic field intensity of a vector yi + zj + xk will be a) 1.414 b) 1.732 c) -1.414 d) -1.732

Description : The magnitude of the conduction current density for a magnetic field intensity of a vector yi + zj + xk will be a) 1.414 b) 1.732 c) -1.414 d) -1.732

Last Answer : b) 1.732

Which of the following criteria is used to choose a coordinate system? a) Distance b) Intensity c) Magnitude d) Geometry

Description : Which of the following criteria is used to choose a coordinate system? a) Distance b) Intensity c) Magnitude d) Geometry

Last Answer : d) Geometry