The Castigliano's second theorem can be used to compute deflections (A) In statically determinate structures only (B) For any type of structure (C) At the point under the load only (D) For beams and frames only

The Castigliano's second theorem can be used to compute deflections
(A) In statically determinate structures only
(B) For any type of structure
(C) At the point under the load only
(D) For beams and frames only
by

1 Answer

Answer :

(B) For any type of structure
by

Related questions

Castigliano's first theorem is applicable (A) For statically determinate structures only (B) When the system behaves elastically (C) Only when principle of superposition is valid(D) None of the above

Description : Castigliano's first theorem is applicable (A) For statically determinate structures only (B) When the system behaves elastically (C) Only when principle of superposition is valid (D) None of the above

Last Answer : (C) Only when principle of superposition is valid

Muller Breslau's principle for obtaining influence lines is applicable to (i) Trusses (ii) Statically determinate beams and frames (iii) Statically indeterminate structures, the material of which is elastic and follows Hooke's law (iv) Any statically indeterminate structure The correct answer is (A) (i), (ii) and (iii) (B) (i), (ii) and (iv) (C) (i) and (ii) (D) Only (i)

Description : Muller Breslau's principle for obtaining influence lines is applicable to (i) Trusses (ii) Statically determinate beams and frames (iii) Statically indeterminate structures, the material of which is elastic and follows Hooke's law (iv ... B) (i), (ii) and (iv) (C) (i) and (ii) (D) Only (i)

Last Answer : (A) (i), (ii) and (iii)

Stress in members of statically determinate simple frames, can be determined by (A) Method of joints (B) Method of sections (C) Graphical solution (D) All the above

Description : Stress in members of statically determinate simple frames, can be determined by (A) Method of joints (B) Method of sections (C) Graphical solution (D) All the above

Last Answer : (D) All the above

Which of the following are statically determinate beams? (a) Only simply supported beams (b) Cantilever, overhanging and simply supported (c) Fixed beams (d) Continuous beams

Description : Which of the following are statically determinate beams? (a) Only simply supported beams (b) Cantilever, overhanging and simply supported (c) Fixed beams (d) Continuous beams

Last Answer : (b) Cantilever, overhanging and simply supported

Influence lines are drawn for structures (A) Of any type (B) Statically determinate (C) Pin-jointed truss (D) None of these

Description : Influence lines are drawn for structures  (A) Of any type  (B) Statically determinate  (C) Pin-jointed truss  (D) None of these 

Last Answer : (A) Of any type 

A simply supported beam A carries a point load at its mid span. Another identical beam B carries the same load but uniformly distributed over the entire span. The ratio of the maximum deflections of the beams A and B, will be (A) 2/3 (B) 3/2 (C) 5/8 (D) 8/5

Description : A simply supported beam A carries a point load at its mid span. Another identical beam B carries  the same load but uniformly distributed over the entire span. The ratio of the maximum  deflections of the beams A and B, will be  (A) 2/3  (B) 3/2  (C) 5/8  (D) 8/5 

Last Answer : (D) 8/5 

For a beam, if fundamental equations of statics are not sufficient to determine all the reactive forces at the supports, the structure is said to be (A) Determinate (B) Statically determinate (C) Statically indeterminate (D) None of these

Description : For a beam, if fundamental equations of statics are not sufficient to determine all the reactive forces at the supports, the structure is said to be (A) Determinate (B) Statically determinate (C) Statically indeterminate (D) None of these

Last Answer : (C) Statically indeterminate

A three-hinged arch is said to be: (A) Statically determinate structure (B) Statically indeterminate structure (C) A bent beam (D) None of these

Description : A three-hinged arch is said to be:  (A) Statically determinate structure  (B) Statically indeterminate structure  (C) A bent beam  (D) None of these

Last Answer : (A) Statically determinate structure 

An arch with three hinges, is a structure (A) Statically determinate (B) Statically indeterminate (C) Geometrically unstable (D) Structurally sound but indeterminate

Description : An arch with three hinges, is a structure (A) Statically determinate (B) Statically indeterminate (C) Geometrically unstable (D) Structurally sound but indeterminate

Last Answer : (A) Statically determinate

A rigid-jointed plane frame is stable and statically determinate if (A) (m + r) = 2j (B) (m + r) = 3j (C) (3m + r) = 3j (D) (m + 3r) = 3j Where m is number of members, r is reaction components and j is number of joints

Description : A rigid-jointed plane frame is stable and statically determinate if (A) (m + r) = 2j (B) (m + r) = 3j (C) (3m + r) = 3j (D) (m + 3r) = 3j Where m is number of members, r is reaction components and j is number of joints

Last Answer : (C) (3m + r) = 3j

If in a rigid-jointed space frame, (6m + r) < 6j, then the frame is (A) Unstable (B) Stable and statically determinate (C) Stable and statically indeterminate (D) None of the above

Description : If in a rigid-jointed space frame, (6m + r) < 6j, then the frame is (A) Unstable (B) Stable and statically determinate (C) Stable and statically indeterminate (D) None of the above

Last Answer : (A) Unstable

If in a pin-jointed plane frame (m + r) > 2j, then the frame is (A) Stable and statically determinate (B) Stable and statically indeterminate (C) Unstable (D) None of the above

Description : If in a pin-jointed plane frame (m + r) > 2j, then the frame is (A) Stable and statically determinate (B) Stable and statically indeterminate (C) Unstable (D) None of the above

Last Answer : (B) Stable and statically indeterminate

A continuous beam is a. statically determinate b. statically indeterminate c.dynamically determinate d. statically redundant

Description : A continuous beam is a. statically determinate b. statically indeterminate c.dynamically determinate d. statically redundant

Last Answer : b. statically indeterminate

Beams composed of more than one material, rigidly connected together so as to behave as one piece, are known as (A) Compound beams (B) Indeterminate beams (C) Determinate beams (D) Composite beams

Description : Beams composed of more than one material, rigidly connected together so as to behave as one  piece, are known as  (A) Compound beams  (B) Indeterminate beams  (C) Determinate beams  (D) Composite beams

Last Answer : (D) Composite beams

.Deflections due to shear is significant in a.Long beams b.Short beams. c.Long as well as short bemas. d.None.

Description : .Deflections due to shear is significant in a.Long beams b.Short beams. c.Long as well as short bemas. d.None.

Last Answer : b.Short beams.

Beams of fixed types are statically indeterminant in which equations of equilibrium are a. incompatible b. insufficient c. incomplete d.complete

Description : Beams of fixed types are statically indeterminant in which equations of equilibrium are a. incompatible b. insufficient c. incomplete d.complete

Last Answer : b. insufficient

Principle of superposition is applicable when (A) Deflections are linear functions of applied forces (B) Material obeys Hooke's law (C) The action of applied forces will be affected by small deformations of the structure (D) None of the above

Description : Principle of superposition is applicable when (A) Deflections are linear functions of applied forces (B) Material obeys Hooke's law (C) The action of applied forces will be affected by small deformations of the structure (D) None of the above

Last Answer : (A) Deflections are linear functions of applied forces

The ratio of the deflections of the free end of a cantilever due to an isolated load at 1/3rd and 2/3rd of the span, is (A) 1/7 (B) 2/7 (C) 3/7 (D) 2/5

Description : The ratio of the deflections of the free end of a cantilever due to an isolated load at 1/3rd and  2/3rd of the span, is  (A) 1/7  (B) 2/7  (C) 3/7  (D) 2/5 

Last Answer : (B) 2/7 

The ratio of the maximum deflections of a simply supported beam with a central load W and of a cantilever of same length and with a load W at its free end, is (A) 1/8 (B) 1/10 (C) 1/12 (D) 1/16

Description : The ratio of the maximum deflections of a simply supported beam with a central load W and of a  cantilever of same length and with a load W at its free end, is  (A) 1/8  (B) 1/10  (C) 1/12  (D) 1/16 

Last Answer : (D) 1/16 

The ratio of the maximum deflections of a beam simply supported at its ends with an isolated central load and that of with a uniformly distributed load over its entire length, is (A) 3/2 (B) 15/24 (C) 24/15 (D) 2/3

Description : The ratio of the maximum deflections of a beam simply supported at its ends with an isolated central load and that of with a uniformly distributed load over its entire length, is (A) 3/2 (B) 15/24 (C) 24/15 (D) 2/3

Last Answer : (C) 24/15

Which of the following theorem can be used for deflection in fixed beams a. Mohr’s first theorem b. Mohr’s second theorem c. Mohr’s third theorem d.Mohr’s fourth theorem

Description : Which of the following theorem can be used for deflection in fixed beams a. Mohr’s first theorem b. Mohr’s second theorem c. Mohr’s third theorem d.Mohr’s fourth theorem

Last Answer : b. Mohr’s second theorem

By applying the static equations i.e. H V M = 0, to a determinate structure, we may determine (A) Supporting reactions only (B) Shear forces only (C) Bending moments only (D) All the above

Description : By applying the static equations i.e. H V M = 0, to a determinate structure, we may  determine  (A) Supporting reactions only  (B) Shear forces only  (C) Bending moments only  (D) All the above

Last Answer : (D) All the above

The principle used for control of deflection in beams and slabs. [ A ] Maxwell method [ B ] Mohr‟s theorem [ C ] Span to effective depth ratio [ D ] Span to overall depth ratio.

Description : The principle used for control of deflection in beams and slabs. [ A ] Maxwell method [ B ] Mohr‟s theorem [ C ] Span to effective depth ratio [ D ] Span to overall depth ratio.

Last Answer : [ C ] Span to effective depth ratio

Compute divergence theorem for D = 5r 2 /4 i in spherical coordinates between r = 1 and r = 2 in volume integral. a) 80 π b) 5 π c) 75 π d) 85 π

Description : Compute divergence theorem for D = 5r 2 /4 i in spherical coordinates between r = 1 and r = 2 in volume integral. a) 80 π b) 5 π c) 75 π d) 85 π

Last Answer : c) 75 π

Compute divergence theorem for D= 5r 2 /4 i in spherical coordinates between r=1 and r=2. a) 80π b) 5π c) 75π d) 85π

Description : Compute divergence theorem for D= 5r 2 /4 i in spherical coordinates between r=1 and r=2. a) 80π b) 5π c) 75π d) 85π

Last Answer : c) 75π

For structural analysis, Maxwell's reciprocal theorem can be applied to: (A) Plastic structures (B) Elastic structures (C) Symmetrical structures (D) All the above

Description : For structural analysis, Maxwell's reciprocal theorem can be applied to: (A) Plastic structures (B) Elastic structures (C) Symmetrical structures (D) All the above

Last Answer : (B) Elastic structures

Pick up the correct statement from the following: (A) The roof slabs of multi-storeyed buildings are constructed monolithically to carry the various floor loads (B) The beams of multi-storeyed buildings rest on girders and are the main load transferring members to the columns (C) The slab is spanned across the secondary beams provided between the main beams (D) All of these

Description : Pick up the correct statement from the following: (A) The roof slabs of multi-storeyed buildings are constructed monolithically to carry the various floor loads (B) The beams of multi-storeyed ... slab is spanned across the secondary beams provided between the main beams (D) All of these

Last Answer : Answer: Option D

Select the incorrect statement [ A ] R.C.C has better fire resistance than steel [ B ] R.C.C. structure is economical than steel structure [ C ] Strength of concrete decreases as age increases [ D ] R.C.C can be used for under water and marine structures

Description : Select the incorrect statement [ A ] R.C.C has better fire resistance than steel [ B ] R.C.C. structure is economical than steel structure [ C ] Strength of concrete decreases as age increases [ D ] R.C.C can be used for under water and marine structures

Last Answer : [ C ] Strength of concrete decreases as age increases

The point of contraflexure occurs in (A) Cantilever beams only (B) Continuous beams only (C) Over hanging beams only (D) All types of beams

Description : The point of contraflexure occurs in (A) Cantilever beams only (B) Continuous beams only (C) Over hanging beams only (D) All types of beams

Last Answer : (C) Over hanging beams only

m1 and m2 are the members of two individual simple trusses of a compound truss. The compound truss will be rigid and determinate if (A) m = m1 + m2 (B) m = m1 + m2 + 1 (C) m = m1 + m2 + 2 (D) m = m1 + m2 + 3

Description : m1 and m2 are the members of two individual simple trusses of a compound truss. The compound  truss will be rigid and determinate if  (A) m = m1 + m2 (B) m = m1 + m2 + 1  (C) m = m1 + m2 + 2  (D) m = m1 + m2 + 3

Last Answer : (D) m = m1 + m2 + 3

Differences in deflections between two points A and B by the moment area method is given by a.(Area of BMD diagram between A and B ).XB/2EI. b.(Area of BMD diagram between A and B).XB/3EI c.(Area of BMD diagram between A and B) .XB/EI d.None.

Description : Differences in deflections between two points A and B by the moment area method is given by a.(Area of BMD diagram between A and B ).XB/2EI. b.(Area of BMD diagram between A and B).XB/3EI c.(Area of BMD diagram between A and B) .XB/EI d.None.

Last Answer : c.(Area of BMD diagram between A and B) .XB/EI

A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a.Proportional to the coefficient of static friction b.Proportional to the coefficient of dynamic friction c.Indeterminate d.Determinate but depends on the acceleration of the cylinder e.None of the above

Description : A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a. ... c.Indeterminate d.Determinate but depends on the acceleration of the cylinder e.None of the above

Last Answer : c. Indeterminate

A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a.Indeterminate b.Proportional to the coefficient of dynamic friction c.Determinate but depends on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction

Description : A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a. ... on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction

Last Answer : c. Determinate but depends on the acceleration of the cylinder

The cross sections of the beams of equal length are a circle and a square whose permissible bending stress is same under same maximum bending. The ratio of their flexural weights is, (A) 1.118 (B) 1.338 (C) 1.228 (D) 1.108

Description : The cross sections of the beams of equal length are a circle and a square whose permissible bending stress is same under same maximum bending. The ratio of their flexural weights is, (A) 1.118 (B) 1.338 (C) 1.228 (D) 1.108

Last Answer : (A) 1.118

Under normal conditions using an ordinary cement, the period of removal of the form work, is: (A) 7 days for beam soffits (B) 14 days for bottom slabs of spans 4.6 m and more (C) 21 days for bottom beams over 6 m spans (D) All the above

Description : Under normal conditions using an ordinary cement, the period of removal of the form work, is: (A) 7 days for beam soffits (B) 14 days for bottom slabs of spans 4.6 m and more (C) 21 days for bottom beams over 6 m spans (D) All the above

Last Answer : Answer: Option D

A compound truss may be formed by connecting two simple rigid frames, by (A) Two bars (B) Three bars (C) Three parallel bars (D) Three bars intersecting at a point

Description : A compound truss may be formed by connecting two simple rigid frames, by  (A) Two bars  (B) Three bars  (C) Three parallel bars  (D) Three bars intersecting at a point 

Last Answer : (B) Three bars 

Pre-stress loss due to friction occurs (A) Only in post-tensioned beams (B) Only in pre-tensioned beams (C) In both post-tensioned and pre-tensioned beams (D) None of the above

Description : Pre-stress loss due to friction occurs (A) Only in post-tensioned beams (B) Only in pre-tensioned beams (C) In both post-tensioned and pre-tensioned beams (D) None of the above

Last Answer : Answer: Option A

The form work from the sides of beams can be removed only after (A) 1 day (B) 4 days (C) 7 days (D) 14 days

Description : The form work from the sides of beams can be removed only after (A) 1 day (B) 4 days (C) 7 days (D) 14 days

Last Answer : Answer: Option A

The form Work including the props can be removed from beams, only after (A) 3 day (B) 7 days (C) 14 days (D) 21 days

Description : The form Work including the props can be removed from beams, only after (A) 3 day (B) 7 days (C) 14 days (D) 21 days

Last Answer : Answer: Option C

The deep beams are designed for (a) Shear force only (b) Bending moment only (c) Both S.F & B.M (d) Bearing

Description : The deep beams are designed for (a) Shear force only (b) Bending moment only (c) Both S.F & B.M (d) Bearing

Last Answer : (b) Bending moment only

Sinking fund is (A) The fund for rebuilding a structure when its economic life is over (B) Raised to meet maintenance costs (C) The total sum to be paid to the municipal authorities by the tenants (D) A part of the money kept in reserve for providing additional structures and structural modifications

Description : Sinking fund is (A) The fund for rebuilding a structure when its economic life is over (B) Raised to meet maintenance costs (C) The total sum to be paid to the municipal ... tenants (D) A part of the money kept in reserve for providing additional structures and structural modifications

Last Answer : (A) The fund for rebuilding a structure when its economic life is over

Macaulays method is more convenient for beams carrying a. Single concentrated load. b.UDL c. Multi loads d.None.

Description : Macaulays method is more convenient for beams carrying a. Single concentrated load. b.UDL c. Multi loads d.None.

Last Answer : c. Multi loads

Tomato varieties are mainly: a. Indeterminate type b. Determinate type c. Both types d. None of these

Description : Tomato varieties are mainly: a. Indeterminate type b. Determinate type c. Both types d. None of these

Last Answer : Both types

How to compute the load of your phase converter?

Description : How to compute the load of your phase converter?

Last Answer : A lot of people don't understand the main function of this smallbut very useful device called a phase converter. This device wasmade for the purpose of changing single electrical power into ... own. Oftentimes people tend to step back when trying tocreate electrical equipment, but little do the

In the virtual work method of plastic analysis of steel structures, the virtual quantity is (a) Slope (b) Moment (c) Load (d) Displacement

Description : In the virtual work method of plastic analysis of steel structures, the virtual quantity is (a) Slope (b) Moment (c) Load (d) Displacement

Last Answer : (d) Displacement

Pick up the correct statement from the following: (A) In a king post truss, principal rafter and tie beams are jointed together with a bridle joint (B) Joint between the principal rafter and the king post is made by making tenon and mortise respectively (C) Joint between strut and king post, is generally of mortise and tenon type (D) All the abov

Description : Pick up the correct statement from the following: (A) In a king post truss, principal rafter and tie beams are jointed together with a bridle joint (B) Joint between the principal rafter and the king ... ) Joint between strut and king post, is generally of mortise and tenon type (D) All the above

Last Answer : Answer: Option D

What is the meaning of statically charged?

Description : What is the meaning of statically charged?

Last Answer : Something that is statically charged has had electrons added toor removed from it, thus giving it an overall electric charge.Extra electrons make for a negatively charged thing, and thestripping of electrons makes for a positively charged thing.

Explain statically induced EMF and Dynamically induced EMF with neat diagrams.

Description : Explain statically induced EMF and Dynamically induced EMF with neat diagrams.

Last Answer : Statically Induced EMF:- When changing magnetic field links with a stationary coil an emf is induced. This emf is called statically induced emf. Statically induced EMF is of two types: Self-induced ... cuts the field and an emf is induced. This emf is called dynamically induced emf.    

Compare statically induced emf with dynamically induced emf on any four points.

Description : Compare statically induced emf with dynamically induced emf on any four points.

Last Answer : Statically induced emf Dynamically induced emf Emf is induced without any relative motion between conductor and magnetic field. Emf is induced due to relative motion between conductor ... induced in transformer windings e.g emf induced in Generator, Alternator armature windings

Define: 1) statically induced EMF 2) dynamically induced EMF

Description : Define: 1) statically induced EMF 2) dynamically induced EMF Write the names of equipments in which these two types of EMF get induced

Last Answer : Concept of statically induced emf: The emf induced in coil or conductors without any relative motion between it and magnetic field is called statically induced emf. When conductor is stationary and flux ... it. This emf is dynamically induced emf. e.g. Emf induced in generators, alternator.