Explain statically induced EMF and Dynamically induced EMF with neat diagrams.

Explain statically induced EMF and Dynamically induced EMF with neat diagrams.
by

1 Answer

Answer :

Statically Induced EMF:-

When changing magnetic field links with a stationary coil an emf is induced. This emf is

called statically induced emf.

Statically induced EMF is of two types:

Self-induced EMF and Mutually induced EMF

Self-induced EMF: The emf induced in one coil due to the linking of changing magnetic flux produced in the same coil is called self induced emf.

image

Mutually induced EMF : The emf induced in one coil due to the linking of changing magnetic flux produced in another coil is called mutually-induced emf.

image

Dynamically Induced EMF:-When a conductor rotates in a stationary magnetic field, it cuts the field and an emf is induced. This emf is called dynamically induced emf.

image 

image  

by

Related questions

Explain the operation of transistor as a switch and as an amplifier, with neat circuit diagrams.

Description : Explain the operation of transistor as a switch and as an amplifier, with neat circuit diagrams. 

Last Answer : Explanation of transistor as a switch: The transistor can be used for two types of application viz. amplification and switching. For the amplification, transistor is biased in its active region. ... results in a large output voltage, which shows that the transistor works as an amplifier.

Compare statically induced emf with dynamically induced emf on any four points.

Description : Compare statically induced emf with dynamically induced emf on any four points.

Last Answer : Statically induced emf Dynamically induced emf Emf is induced without any relative motion between conductor and magnetic field. Emf is induced due to relative motion between conductor ... induced in transformer windings e.g emf induced in Generator, Alternator armature windings

Define: 1) statically induced EMF 2) dynamically induced EMF

Description : Define: 1) statically induced EMF 2) dynamically induced EMF Write the names of equipments in which these two types of EMF get induced

Last Answer : Concept of statically induced emf: The emf induced in coil or conductors without any relative motion between it and magnetic field is called statically induced emf. When conductor is stationary and flux ... it. This emf is dynamically induced emf. e.g. Emf induced in generators, alternator.

List the types of induced emf.

Description : List the types of induced emf.

Last Answer : The types of induced emf are : i) Statically induced emf , ii) Dynamically induced emf

With the help of waveforms and phasor diagrams, show the phase relationship between voltage and current in pure inductive circuit.

Description : With the help of waveforms and phasor diagrams, show the phase relationship between voltage and current in pure inductive circuit.

Last Answer : Phasor Diagram:  

Define EMF and state its unit.

Description : Define EMF and state its unit.

Last Answer : Electromotive force(EMF): A potential difference generated by a source of electrical energy across its terminals which tends to produce an electric current in a circuit is called electromotive force. Unit of EMF is Volt

Write emf equation of a transformer.

Description : Write emf equation of a transformer.

Last Answer : E.M.F equation of transformer is given by where Фm= Maximum value of ac flux linking with primary and secondary winding. f = frequency of applied ac signal N= number of turns on primary or ... in primary = E1=4.44 Фm f N1volts  Voltage induced in primary = E2=4.44 Фm f N2volts

Explain the operation of a full wave bridge rectifier with π filter using a neat diagram. Draw input and output waveforms.

Description : Explain the operation of a full wave bridge rectifier with π filter using a neat diagram. Draw input and output waveforms.

Last Answer : During positive half-cycle of input, the secondary voltage VAB is positive, so diodes D1 and D2 forward biased and D3 and D4 reverse biased. The load current flows from terminal A ... smooth DC voltage appears across the load. The input and output waveforms are shown in the figure.

A continuous beam is a. statically determinate b. statically indeterminate c.dynamically determinate d. statically redundant

Description : A continuous beam is a. statically determinate b. statically indeterminate c.dynamically determinate d. statically redundant

Last Answer : b. statically indeterminate

Explain the working of auto-transformer and state any two advantages of it.

Description : Explain the working of auto-transformer and state any two advantages of it. 

Last Answer : Working of auto transformer :-It is a transformer with one winding only, part of this being common to both primary and secondary. In this transformer the primary and secondary are not electrically ... are less, so the efficiency of auto transformer is higher than that of two winding transformer.

Draw and explain: bridge rectifier with shunt capacitor filter.

Description : Draw and explain: bridge rectifier with shunt capacitor filter.

Last Answer : Operation of bridge rectifier with capacitor filter is explained in different intervals with the help of the following wave form. Operation in interval at 0 to A: ... filter is very close to theideal dc voltage waveform as most of the ripple is removed from rectified output.

Explain ideal voltage source with suitable diagram.

Description : Explain ideal voltage source with suitable diagram.

Last Answer : A voltage source is a two terminal device which can maintain a fixed voltage. An ideal voltage source can maintain the fixed voltage independent of the load resistance or the output current. ... the terminal voltage remains constant equal to V volts without load (RL = ∞) or with load

List any 4 advantages and any 4 disadvantages of Integrated circuits.

Description : List any 4 advantages and any 4 disadvantages of Integrated circuits.

Last Answer : Advantages of Integrated circuits:- 1. Extremely small size. 2. Very small weight . 3. Very low cost . 4. More reliable . 5. Lower power consumption . 6. Easy replacement ... achieved.  9.Large value of saturation resistance of transistors. 10.Voltage dependence of resistor and capacitors.

Draw the output characteristics of BJT in CE configuration and label various regions on it.

Description : Draw the output characteristics of BJT in CE configuration and label various regions on it.

Last Answer :  output characteristics of BJT in CE configuration 

State the applications of BJT.

Description : State the applications of BJT.

Last Answer : Applications of BJT: 1. As a switch 2. As an amplifier 3. As a multivibrator 4. As a oscillator 5. As a timer circuit 6. As a Logic circuits 7. Delay circuits

Draw the block diagram of regulated power supply.

Description : Draw the block diagram of regulated power supply.

Last Answer : Block diagram of regulated power supply:

Define filter and state it’s types.

Description : Define filter and state it’s types.

Last Answer : A filter circuit may be defined as a circuit, which removes (or minimizes)the unwanted a.c. component of the rectifier output and allows only the d.c. component to reach the load. Types of filters 1) ... 2) Choke input filter(series inductor filter) 3) LC filter 4) π Filter 5) RC filter

List different types of resistors and capacitors.

Description : List different types of resistors and capacitors.

Last Answer : Types of Resistors: 1. Carbon Composition resistor 2. Thin film resistor 3. Thick film resistor 4. Wire wound resistor 5. Thermistor 6. LDR 7. Photo resistor Types of capacitors: 1 ... capacitor 2. Variable capacitor 3. Air ganged capacitor 4. PVC ganged capacitor 5. Trimmer capacitor

Define transformation ratio of a transformer.

Description : Define transformation ratio of a transformer.

Last Answer : Transformation Ratio (K) of a transformer: It is the ratio of secondary number of turns to primary number of turns. (OR) It is the ratio of secondary voltage to primary voltage. (OR ) It is the ratio of primary current to secondary current. OR

Define FHP motor and list various types.

Description : Define FHP motor and list various types.

Last Answer : Any motor rated less than one horse power may be called as fractional horse power motors(FHP) various types of FHP motors are: 1.Split phase induction motor 2. Capacitor start induction motor 3. Capacitor start capacitor run induction motor 4. Shaded pole induction motor. 

Write the relation between RMS value and Average value.

Description : Write the relation between RMS value and Average value.

Last Answer : The ratio of RMS value to average value is called the form factor of an alternating quantity.

Define (i) Permeability (ii) Reluctance.

Description : Define (i) Permeability (ii) Reluctance.

Last Answer : Permeability: The capability of the magnetic material to conduct the magnetic flux is known as permeability (OR) It is defined as ratio of magnetic flux density B in a medium to the magnetic flux intensity ... as the property of a material due to which it opposes the creation of magnetic flux in it.

Draw: (i) Input characteristics of transistor in CE mode. (ii) Output characteristics of transistor in CE mode and show different regions on it.

Description : Draw: (i) Input characteristics of transistor in CE mode. (ii) Output characteristics of transistor in CE mode and show different regions on it.

Last Answer : (i) Input characteristics of transistor in CE mode.   (ii) Output characteristics of transistor in CE mode and show different regions on it.  

State the need for filters and list the different types of filters.

Description : State the need for filters and list the different types of filters.

Last Answer : Need for filters 1) Output of all rectifiers is pulsating dc voltage and most of citcuits which work on dc requires pure dc voltage. 2) So in order to get pure dc waveform, filters are connected at the ... 2) Choke input filter(series inductor filter) 3) LC filter 4) π Filter 5) RC filter

List the different transistor configurations.

Description : List the different transistor configurations.

Last Answer : The three different transistor configurations are, 1. Common emitter configuration(CE) 2. Common base configuration(CB) 3. Common collector configuration(CC)

State why transistor is called as a bipolar device.

Description : State why transistor is called as a bipolar device.

Last Answer : In case of transistor (BJT), the current conduction takes place due to both electrons and holes, ie, due to both positive as well as negative polarity charge carriers. Therefore transistor is called a bipolar device. 

List any two applications of LED.

Description : List any two applications of LED.

Last Answer : 1) LEDs are used in 7 segment display and dot matrix display. 2) They are used in opto couplers. 3) They are used for indicating power ON/OFF conditions. 4) They are used in infrared remote controls. 5) They are used as indicators in various electronic circuits.

Define passive components and classify them.

Description : Define passive components and classify them.

Last Answer : Passive components: The components which by themselves are not capable of amplifying (or processing) electrical signals are known as passive components. They require external energy source for their functioning. These are bidirectional devices.  Classification: Resistors, Capacitors, Inductors etc.

Compare analog and digital ICs.

Description : Compare analog and digital ICs.

Last Answer : Sr. No. Analog ICs Digital ICs  1 Analog ICs accept and output analog data through its pins. Digital ICs deal with only logic data inputs and outputs.  2 Almost every ... IC for dedicated application. Works with TTL logic level and works in voltage range of 0-5V only.

Compare autotransformer with two winding transformer.

Description : Compare autotransformer with two winding transformer.

Last Answer : Two winding transformer Auto transformer 1.It has two separate windings : a) primary, b)secondary.  1. An auto transformer has single winding which acts both as primary and secondary ... varied. 3. They find application as boosters in AC feeders to increase the voltage levels.

Define: (i) Efficiency (ii) Voltage regulation of transformer.

Description : Define: (i) Efficiency (ii) Voltage regulation of transformer.

Last Answer : i) Efficiency : It is the ratio of output power to the input power of the transformer.It is denoted by η. ii) Voltage Regulation of transformer: The ratio of the change in Secondary Terminal ... So where, VNL = No Load Secondary voltage VFL = Full load secondary voltage

State Faraday's first and second law of electromagnetic induction.

Description : State Faraday's first and second law of electromagnetic induction.

Last Answer : i)Faraday's First Law: Whenever a conductor cuts the magnetic lines of force or is cut by the magnetic lines of force or flux linking with conductor changes, an emf is induced in the conductor.  ... Law: The magnitude of induced emf is directly proportional to the rate of change of flux.

State the types of single phase induction motors.

Description : State the types of single phase induction motors.

Last Answer : The types of single phase induction motors are: i) Resistance split phase induction motor. ii) Capacitor split phase inductor motor. a. Capacitor start induction run motor b. permanent capacitor motor c. capacitor start capacitor run induction motor iii) Shaded pole induction motor.

State the working principle of I ø transformer.

Description : State the working principle of I ø transformer.

Last Answer : Working principle of transformer : Transformer works on the principle of mutual electromagnetic induction. When AC voltage is applied to the primary winding of a transformer it causes ac current to flow ... in the secondary winding. The current flows in the secondary circuit if load is connected.

Define: (i) Inductive reactance (ii) Impedance.

Description : Define: (i) Inductive reactance (ii) Impedance.

Last Answer : i) Inductive reactance: Inductive reactance is the opposition offered by an inductor to alternating current . It is denoted by XL and given by XL = 2πf LΩ = ωL Ω ii)Impedance: It is the total opposition offered to flow of AC current in an AC circuit. It is denoted by Z and the unit is ohm. 

Define: (i) Electromagnetism (ii) Magnetic flux.

Description : Define: (i) Electromagnetism (ii) Magnetic flux.

Last Answer : i)Electromagnetism : It is the magnetism generated by electricity. OR  It is defined as the phenomenon associated with electric and magnetic fields and their interactions with each other. ii) Magnetic flux : The total number of magnetic lines of force in a magnetic field is called magnetic flux.

Explain dynamic and static induced emf with neat diagram.

Description : Explain dynamic and static induced emf with neat diagram.

Last Answer : Dynamically Induced EMF:-  In this case, either coil moves or magnet moves, so that there is relative motion between coil & magnetic field. Thus magnetic field is cut by coil & emf is induced in it. The emf ... The expression for induced EMF is e= -L(di/dt) or = -N(dϕ/dt).

With neat diagrams explain the configuration of a step-by-step switching system.

Description : With neat diagrams explain the configuration of a step-by-step switching system.

Last Answer : The schematic diagram for such an exchange is given in Fig. Each subscriber is connected to a single rotary pre-selector switch at the exchange, the outputs from this switch being ... two further digits, connection is established, providing the called subscriber's to answer his telephone.

explain with neat diagrams the various CMOS fabrication

Description : explain with neat diagrams the various CMOS fabrication

Last Answer : technology P-well process (4) N-well process (4) Silicon-On-Insulator Process (4) Twin- tub Process (4)

With the help of neat diagrams,explain the following methods of speed control in DC series motor. i) Field diverter method. ii) Armature diverter method.

Description : With the help of neat diagrams,explain the following methods of speed control in DC series motor. i) Field diverter method. ii) Armature diverter method.

Last Answer : (i) Field diverter method: - Resistance connected in parallel with field winding -By adjusting this resistance current can by diverted from field winding -Thus field current decreases and the speed can be ... decreased, the flux must increase and hence speed is decreased than the rated speed.

Which of the diagrams shown in the illustration, indicates the highest induced voltage? EL-0028 A. Diagram 'A' only B. Diagram 'B' only C. Both diagrams 'A' and 'C' D. Both diagrams 'B' and 'D'

Description : Which of the diagrams shown in the illustration, indicates the highest induced voltage? EL-0028 A. Diagram 'A' only B. Diagram 'B' only C. Both diagrams 'A' and 'C' D. Both diagrams 'B' and 'D'

Last Answer : Answer: D

The current in ampere through an inductor is i(10+20t) Here t is in second. The induced emf in the inductor 4V. Total flux linked with the inductor at

Description : The current in ampere through an inductor is i(10+20t) Here t is in second. The induced emf in the inductor 4V. Total flux linked with the inductor at

Last Answer : The current in ampere through an inductor is i(10+20t) Here t is in second. The induced emf in the inductor 4V. ... 10 Wb B. 20 Wb C. 30 Wb D. 40 Wb

The current in ampere through an inductor is i(10+20t) Here t is in second. The induced emf in the inductor 4V. The self inductance of the indicator i

Description : The current in ampere through an inductor is i(10+20t) Here t is in second. The induced emf in the inductor 4V. The self inductance of the indicator i

Last Answer : The current in ampere through an inductor is i(10+20t) Here t is in second. The induced emf in the inductor 4V. The ... B. `0.4` C. `0.1` D. `1.0`

Write down the equation for frequency of emf induced in an Altenator.

Description : Write down the equation for frequency of emf induced in an Altenator.

Last Answer : F = (PN)/120 Hz,Where P- Number of poles, N-Speed in rpm

On what factors does the induced emf in the coil depend?

Description : On what factors does the induced emf in the coil depend?

Last Answer : Induced e.m.f in a coil increases with increase in: a) the number of turns of the coil, b) the strength of the magnetic field c) the speed with which the magnet or the coil moves d) area of the coil

What is the equation used to find out frequency of number of cycles of induced emf?

Description : What is the equation used to find out frequency of number of cycles of induced emf?

Last Answer : f = NP/120

How we can find the direction of induced emf?

Description : How we can find the direction of induced emf? 

Last Answer : The direction of induced emf can be find out by the Fleming's right hand rule', and lenz's law' Fleming's right hand rule : Fleming's right hand rule states that, if ... that the action of magnetic field set up by induced current tends to opposes the root cause which produces it. 

Find the emf induced in a coil of 60 turns with a flux rate of 3 units. a) -60 b) -180 c) 60 d) 180

Description : Find the emf induced in a coil of 60 turns with a flux rate of 3 units. a) -60 b) -180 c) 60 d) 180

Last Answer : b) -180

The induced emf in a material opposes the flux producing it. This is a) Faraday law b) Ampere law c) Lenz law d) Curie law

Description : The induced emf in a material opposes the flux producing it. This is a) Faraday law b) Ampere law c) Lenz law d) Curie law

Last Answer : c) Lenz law

Find the induced EMF in an inductor of 2mH and the current rate is 2000 units. a) 4 b) -4 c) 1 d) -1

Description : Find the induced EMF in an inductor of 2mH and the current rate is 2000 units. a) 4 b) -4 c) 1 d) -1

Last Answer : b) -4