Muller Breslau's principle for obtaining influence lines is applicable to (i) Trusses (ii) Statically determinate beams and frames (iii) Statically indeterminate structures, the material of which is elastic and follows Hooke's law (iv) Any statically indeterminate structure The correct answer is (A) (i), (ii) and (iii) (B) (i), (ii) and (iv) (C) (i) and (ii) (D) Only (i)

Muller Breslau's principle for obtaining influence lines is applicable to
 (i) Trusses
 (ii) Statically determinate beams and frames
 (iii) Statically indeterminate structures, the material of which is elastic and follows Hooke's law
 (iv) Any statically indeterminate structure
 The correct answer is
(A) (i), (ii) and (iii)
(B) (i), (ii) and (iv)
(C) (i) and (ii)
(D) Only (i)
by

1 Answer

Answer :

(A) (i), (ii) and (iii)
by

Related questions

The Castigliano's second theorem can be used to compute deflections (A) In statically determinate structures only (B) For any type of structure (C) At the point under the load only (D) For beams and frames only

Description : The Castigliano's second theorem can be used to compute deflections (A) In statically determinate structures only (B) For any type of structure (C) At the point under the load only (D) For beams and frames only

Last Answer : (B) For any type of structure

Castigliano's first theorem is applicable (A) For statically determinate structures only (B) When the system behaves elastically (C) Only when principle of superposition is valid(D) None of the above

Description : Castigliano's first theorem is applicable (A) For statically determinate structures only (B) When the system behaves elastically (C) Only when principle of superposition is valid (D) None of the above

Last Answer : (C) Only when principle of superposition is valid

Influence lines are drawn for structures (A) Of any type (B) Statically determinate (C) Pin-jointed truss (D) None of these

Description : Influence lines are drawn for structures  (A) Of any type  (B) Statically determinate  (C) Pin-jointed truss  (D) None of these 

Last Answer : (A) Of any type 

For a beam, if fundamental equations of statics are not sufficient to determine all the reactive forces at the supports, the structure is said to be (A) Determinate (B) Statically determinate (C) Statically indeterminate (D) None of these

Description : For a beam, if fundamental equations of statics are not sufficient to determine all the reactive forces at the supports, the structure is said to be (A) Determinate (B) Statically determinate (C) Statically indeterminate (D) None of these

Last Answer : (C) Statically indeterminate

A three-hinged arch is said to be: (A) Statically determinate structure (B) Statically indeterminate structure (C) A bent beam (D) None of these

Description : A three-hinged arch is said to be:  (A) Statically determinate structure  (B) Statically indeterminate structure  (C) A bent beam  (D) None of these

Last Answer : (A) Statically determinate structure 

An arch with three hinges, is a structure (A) Statically determinate (B) Statically indeterminate (C) Geometrically unstable (D) Structurally sound but indeterminate

Description : An arch with three hinges, is a structure (A) Statically determinate (B) Statically indeterminate (C) Geometrically unstable (D) Structurally sound but indeterminate

Last Answer : (A) Statically determinate

If in a rigid-jointed space frame, (6m + r) < 6j, then the frame is (A) Unstable (B) Stable and statically determinate (C) Stable and statically indeterminate (D) None of the above

Description : If in a rigid-jointed space frame, (6m + r) < 6j, then the frame is (A) Unstable (B) Stable and statically determinate (C) Stable and statically indeterminate (D) None of the above

Last Answer : (A) Unstable

If in a pin-jointed plane frame (m + r) > 2j, then the frame is (A) Stable and statically determinate (B) Stable and statically indeterminate (C) Unstable (D) None of the above

Description : If in a pin-jointed plane frame (m + r) > 2j, then the frame is (A) Stable and statically determinate (B) Stable and statically indeterminate (C) Unstable (D) None of the above

Last Answer : (B) Stable and statically indeterminate

Beams composed of more than one material, rigidly connected together so as to behave as one piece, are known as (A) Compound beams (B) Indeterminate beams (C) Determinate beams (D) Composite beams

Description : Beams composed of more than one material, rigidly connected together so as to behave as one  piece, are known as  (A) Compound beams  (B) Indeterminate beams  (C) Determinate beams  (D) Composite beams

Last Answer : (D) Composite beams

Principle of superposition is applicable when (A) Deflections are linear functions of applied forces (B) Material obeys Hooke's law (C) The action of applied forces will be affected by small deformations of the structure (D) None of the above

Description : Principle of superposition is applicable when (A) Deflections are linear functions of applied forces (B) Material obeys Hooke's law (C) The action of applied forces will be affected by small deformations of the structure (D) None of the above

Last Answer : (A) Deflections are linear functions of applied forces

A continuous beam is a. statically determinate b. statically indeterminate c.dynamically determinate d. statically redundant

Description : A continuous beam is a. statically determinate b. statically indeterminate c.dynamically determinate d. statically redundant

Last Answer : b. statically indeterminate

Stress in members of statically determinate simple frames, can be determined by (A) Method of joints (B) Method of sections (C) Graphical solution (D) All the above

Description : Stress in members of statically determinate simple frames, can be determined by (A) Method of joints (B) Method of sections (C) Graphical solution (D) All the above

Last Answer : (D) All the above

Which of the following are statically determinate beams? (a) Only simply supported beams (b) Cantilever, overhanging and simply supported (c) Fixed beams (d) Continuous beams

Description : Which of the following are statically determinate beams? (a) Only simply supported beams (b) Cantilever, overhanging and simply supported (c) Fixed beams (d) Continuous beams

Last Answer : (b) Cantilever, overhanging and simply supported

A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a.Proportional to the coefficient of static friction b.Proportional to the coefficient of dynamic friction c.Indeterminate d.Determinate but depends on the acceleration of the cylinder e.None of the above

Description : A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a. ... c.Indeterminate d.Determinate but depends on the acceleration of the cylinder e.None of the above

Last Answer : c. Indeterminate

A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a.Indeterminate b.Proportional to the coefficient of dynamic friction c.Determinate but depends on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction

Description : A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a. ... on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction

Last Answer : c. Determinate but depends on the acceleration of the cylinder

Hooke’s law is applicable within (a)Elastic limit (b)Plastic limit (c)Fracture point (d) Ultimate strength

Description : Hooke’s law is applicable within (a)Elastic limit (b)Plastic limit (c)Fracture point (d) Ultimate strength

Last Answer : (a)Elastic limit

m1 and m2 are the members of two individual simple trusses of a compound truss. The compound truss will be rigid and determinate if (A) m = m1 + m2 (B) m = m1 + m2 + 1 (C) m = m1 + m2 + 2 (D) m = m1 + m2 + 3

Description : m1 and m2 are the members of two individual simple trusses of a compound truss. The compound  truss will be rigid and determinate if  (A) m = m1 + m2 (B) m = m1 + m2 + 1  (C) m = m1 + m2 + 2  (D) m = m1 + m2 + 3

Last Answer : (D) m = m1 + m2 + 3

A rigid-jointed plane frame is stable and statically determinate if (A) (m + r) = 2j (B) (m + r) = 3j (C) (3m + r) = 3j (D) (m + 3r) = 3j Where m is number of members, r is reaction components and j is number of joints

Description : A rigid-jointed plane frame is stable and statically determinate if (A) (m + r) = 2j (B) (m + r) = 3j (C) (3m + r) = 3j (D) (m + 3r) = 3j Where m is number of members, r is reaction components and j is number of joints

Last Answer : (C) (3m + r) = 3j

At yield point of a test piece, the material (A) Obeys Hooke's law (B) Behaves in an elastic manner (C) Regains its original shape on removal of the load(D) Undergoes plastic deformation

Description : At yield point of a test piece, the material  (A) Obeys Hooke's law  (B) Behaves in an elastic manner  (C) Regains its original shape on removal of the load  (D) Undergoes plastic deformation 

Last Answer : (D) Undergoes plastic deformation 

Every material obeys the Hooke's law within its (A) Elastic limit (B) Plastic point (C) Limit of proportionality (D) None of these

Description : Every material obeys the Hooke's law within its (A) Elastic limit (B) Plastic point (C) Limit of proportionality (D) None of these

Last Answer : (C) Limit of proportionality

Pick out the correct statement. (A) Materials exhibiting high elasticity obey Hooke's law (B) The elastic behaviour of rubber under compression is the same as its behaviour under tension (C) The damping capacity of a material is due to its plastic deformation (D) The stress required to cause plastic flow in polycrystalline material is

Description : Pick out the correct statement. (A) Materials exhibiting high elasticity obey Hooke's law (B) The elastic behaviour of rubber under compression is the same as its behaviour under tension (C) ... to its plastic deformation (D) The stress required to cause plastic flow in polycrystalline material is

Last Answer : Option B

At ‘yield point’ of a copper wire A. the load hasn't exceeded the elastic limit yet; so, Hooke's law applies B. the load has already exceeded the elastic limit and the material has become plastic C. even the plastic stage has passed and the wire has snapped already D. Like Brass and Bronze, Copper has no yield poin

Description : At yield point' of a copper wire A. the load hasn't exceeded the elastic limit yet; so, Hooke's law applies B. the load has already exceeded the elastic limit and the material has become ... stage has passed and the wire has snapped already D. Like Brass and Bronze, Copper has no yield poin

Last Answer : the load has already exceeded the elastic limit and the material has become plastic

Every material obeys the Hooke’s law within (a) Elastic limit (b) Plastic limit (c) Limit of proportionality (d) None of these

Description : Every material obeys the Hooke’s law within (a) Elastic limit (b) Plastic limit (c) Limit of proportionality (d) None of these

Last Answer : c) Limit of proportionality

For stable structures, one of the important properties of flexibility and stiffness matrices is that the elements on the main diagonal (i) Of a stiffness matrix must be positive (ii) Of a stiffness matrix must be negative (iii) Of a flexibility matrix must be positive (iv) Of a flexibility matrix must be negative The correct answer is (A) (i) and (iii) (B) (ii) and (iii) (C) (i) and (iv) (D) (ii) and (iv)

Description : For stable structures, one of the important properties of flexibility and stiffness matrices is that the elements on the main diagonal (i) Of a stiffness matrix must be positive (ii) Of a stiffness matrix must be negative (iii) Of ... ) (B) (ii) and (iii) (C) (i) and (iv) (D) (ii) and (iv)

Last Answer : (A) (i) and (iii)

The law which states, "Within elastic limits strain produced is proportional to the stress producing it", is known as (A) Bernoulli's law (B) Stress law (C) Hooke's law (D) Poisson's law

Description : The law which states, "Within elastic limits strain produced is proportional to the stress producing  it", is known as  (A) Bernoulli's law  (B) Stress law  (C) Hooke's law  (D) Poisson's law

Last Answer : (C) Hooke's law 

Tomato varieties are mainly: a. Indeterminate type b. Determinate type c. Both types d. None of these

Description : Tomato varieties are mainly: a. Indeterminate type b. Determinate type c. Both types d. None of these

Last Answer : Both types

Transmission media are usually categorized as_______. A) fixed or unfixed B) guided orunguided C) determinate or indeterminate D) metallicor nonmetallic

Description : Transmission media are usually categorized as_______. A) fixed or unfixed B) guided orunguided C) determinate or indeterminate D) metallicor nonmetallic

Last Answer : guided orunguided

Transmission media are usually categorized as . a. Guided or Unguided b. Determinate or Indeterminate c. Fixed or Unfixed d. Encryption or Decryption

Description : Transmission media are usually categorized as . a. Guided or Unguided b. Determinate or Indeterminate c. Fixed or Unfixed d. Encryption or Decryption

Last Answer : a. Guided or Unguided

Williot-Mohr diagram is used to determine a.slope of beams b.107 dynes c.deflection in beams d.deflection in trusses e.slope of trusses

Description : Williot-Mohr diagram is used to determine a.slope of beams b.107 dynes c.deflection in beams d.deflection in trusses e.slope of trusses

Last Answer : d. deflection in trusses

Beams of fixed types are statically indeterminant in which equations of equilibrium are a. incompatible b. insufficient c. incomplete d.complete

Description : Beams of fixed types are statically indeterminant in which equations of equilibrium are a. incompatible b. insufficient c. incomplete d.complete

Last Answer : b. insufficient

All materials obey Hooke's law within elastic limit. When elastic limit is reached, the tensile strain (A) Increases very quickly (B) Decreases very quickly (C) Increases in proportion to stress (D) Decreases in proportion to stress

Description : All materials obey Hooke's law within elastic limit. When elastic limit is reached, the tensile strain (A) Increases very quickly (B) Decreases very quickly (C) Increases in proportion to stress (D) Decreases in proportion to stress

Last Answer : (A) Increases very quickly

Hooke's law states that A. the extension is proportional to the load when the elastic limit is not exceeded B. the extension is inversely proportional to the load when the elastic limit is not exceeded C. the extension is independent of the load when the elastic limit is not exceeded D. load is dependent on extension

Description : Hooke's law states that A. the extension is proportional to the load when the elastic limit is not exceeded B. the extension is inversely proportional to the load when the elastic limit is not ... is independent of the load when the elastic limit is not exceeded D. load is dependent on extension

Last Answer : the extension is proportional to the load when the elastic limit is not exceeded

Hooke's law (A) Applies to elastic deformation (B) Applies beyond limit of proportionality in stress-strain curve (C) States that stress is inversely proportional to strain upto elastic limit (D) None of these

Description : Hooke's law (A) Applies to elastic deformation (B) Applies beyond limit of proportionality in stress-strain curve (C) States that stress is inversely proportional to strain upto elastic limit (D) None of these

Last Answer : (A) Applies to elastic deformation

The statement : stress is proportional to strain, i.e. the Hooke’s law holds good upto (a) Elastic Limit (b) Proportional Limit (c) Plastic Limit (d) Yield point

Description : The statement : stress is proportional to strain, i.e. the Hooke’s law holds good upto (a) Elastic Limit (b) Proportional Limit (c) Plastic Limit (d) Yield point

Last Answer : (b) Proportional Limit

State Hooke’s Law of elasticity. Define Elastic limit.

Description : State Hooke’s Law of elasticity. Define Elastic limit.

Last Answer : Hooke’s Law:- Within elastic limit, stress is directly proportional to strain.  Elastic limit: -It is the maximum value of the stress upto which the body shows elasticity.

During which stage of pressure ulcer development does the ulcer extend into the underlying structures, including the muscle and possibly the bone? a) Stage IV A stage IV pressure ulcer extends into the underlying structure, including the muscle and possibly the bone. b) Stage III A stage III ulcer extends into the subcutaneous tissue. c) Stage II A stage II ulcer exhibits a break in the skin through the epidermis or dermis. d) Stage I A stage I pressure ulcer is an area of nonblanchable erythema, tissue swelling, and congestion, and the patient complains of discomfort.

Description : During which stage of pressure ulcer development does the ulcer extend into the underlying structures, including the muscle and possibly the bone? a) Stage IV A stage IV pressure ulcer ... area of nonblanchable erythema, tissue swelling, and congestion, and the patient complains of discomfort.

Last Answer : a) Stage IV A stage IV pressure ulcer extends into the underlying structure, including the muscle and possibly the bone.

Which one of the following statements is not correct with respect to PSC beams? (a) Loss due to shrinkage is proportional to water-cement ratio used in concrete (b) Loss due to creep is proportional to the age of the member at the time of loading. (c) Loss due to elastic deformation is directly proportionally to the modulus of elasticity of concrete (d) Loss due to friction occurs in post tensioned concrete members

Description : Which one of the following statements is not correct with respect to PSC beams? (a) Loss due to shrinkage is proportional to water-cement ratio used in concrete (b) Loss due to creep is ... to the modulus of elasticity of concrete (d) Loss due to friction occurs in post tensioned concrete members

Last Answer : (c) Loss due to elastic deformation is directly proportionally to the modulus of elasticity of concrete

By applying the static equations i.e. H V M = 0, to a determinate structure, we may determine (A) Supporting reactions only (B) Shear forces only (C) Bending moments only (D) All the above

Description : By applying the static equations i.e. H V M = 0, to a determinate structure, we may  determine  (A) Supporting reactions only  (B) Shear forces only  (C) Bending moments only  (D) All the above

Last Answer : (D) All the above

Match the following structures with their respective location in organs. (A) Crypts of Lieberkuhn (i) Pancreas (B) Glisson’s Capsule (ii) Duodenum (C) Islets of Langerhans (iii) Small intestine (D) Brunner’s Glands (iv) Liver Select the correct option from the following: (A) (B) (C) (D) (a) (iii) (ii) (i) (iv) (b) (iii) (i) (ii) (iv) (c) (ii) (iv) (i) (iii) (d) (iii) (iv) (i) (ii)

Description : Match the following structures with their respective location in organs. (A) Crypts of Lieberkuhn (i) Pancreas (B) Glisson's Capsule (ii) Duodenum (C) Islets of Langerhans (iii) Small intestine (D) Brunner's Glands (iv) Liver Select the ... ii) (iv) (c) (ii) (iv) (i) (iii) (d) (iii) (iv) (i) (ii)

Last Answer : (d) (iii) (iv) (i) (ii)

The main reinforcement in the toe of a T-shaped R C. retaining wall is provided on (i) Top face parallel to the wall (ii) Top face perpendicular to the wall (iii) Bottom face parallel to the wall (iv) Bottom face perpendicular to the wall The correct answer is (A) Only (ii) is correct (B) (i) and (ii) are correct (C) (iii) and (iv) are correct (D) Only (iv) is correct

Description : The main reinforcement in the toe of a T-shaped R C. retaining wall is provided on (i) Top face parallel to the wall (ii) Top face perpendicular to the wall (iii) Bottom face parallel to the wall (iv) ... (i) and (ii) are correct (C) (iii) and (iv) are correct (D) Only (iv) is correct

Last Answer : Answer: Option D

In the design of a front counterfort in a counterfort retaining wall, the main reinforcement is provided on (i) Bottom face near counterfort (ii) Top face near counterfort (iii) Bottom face near centre of span (iv) Top face near centre of span The correct answer is (A) Only (i) (B) Only (ii) (C) Both (i) and (iv) (D) Both (ii) and (iii)

Description : In the design of a front counterfort in a counterfort retaining wall, the main reinforcement is provided on (i) Bottom face near counterfort (ii) Top face near counterfort (iii) Bottom face near centre of span (iv) Top ... ) (B) Only (ii) (C) Both (i) and (iv) (D) Both (ii) and (iii)

Last Answer : Answer: Option C

The spring balance works on the principle of - (1) Boyle's Law (2) Hooke's Law (3) Bernoulli's principle (4) Pascal's Law

Description : The spring balance works on the principle of - (1) Boyle's Law (2) Hooke's Law (3) Bernoulli's principle (4) Pascal's Law

Last Answer : (2) Hooke's Law Explanation: A spring scale or spring balance or Newton meter is a type of weighing scale. It consists of spring fixed at one end with a hook to attach an object at the ... force needed to extend a spring is proportional to the distance that spring is extended from its rest position.

Which law/principle of solid mechanics is similar/equivalent to Newton's law of viscosity in fluid mechanics? (A) Archimedes principle (B) Newton's second law of motion (C) Hooke's law (D) Newton's third law of motion

Description : Which law/principle of solid mechanics is similar/equivalent to Newton's law of viscosity in fluid mechanics? (A) Archimedes principle (B) Newton's second law of motion (C) Hooke's law (D) Newton's third law of motion

Last Answer : (C) Hooke's law

The spring balance works on the principle of __________ . (1) Boyle’s Law (2) Hooke’s Law (3) Bernoulli’s principle (4) Pascal’s Law

Description : The spring balance works on the principle of __________ . (1) Boyle’s Law (2) Hooke’s Law (3) Bernoulli’s principle (4) Pascal’s Law

Last Answer : Hooke’s Law

The application of elastic theory to the beams is based on the assumption that (a) At any cross-section, plane sections before bending remain plane after bending (b) All tensile stresses are taken up by reinforcement alone and none by the concrete. (c) Steel reinforcement is free from initial stresses when it is embedded in concrete. (d) All of the above

Description : The application of elastic theory to the beams is based on the assumption that (a) At any cross-section, plane sections before bending remain plane after bending (b) All tensile stresses are taken ... reinforcement is free from initial stresses when it is embedded in concrete. (d) All of the above

Last Answer : (d) All of the above

One which is applicable to a welded joint (i)Less rigidity (ii) Heavy (iii) Difficult process (iv) None

Description : One which is applicable to a welded joint (i)Less rigidity (ii) Heavy (iii) Difficult process (iv) None

Last Answer : (iv) None

Higher pitch of the roof (i) Results in stronger roof (ii) Results in weaker roof (iii) Requires more covering material (iv) Requires less covering material The correct answer is (A) (i) and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv)

Description : Higher pitch of the roof (i) Results in stronger roof (ii) Results in weaker roof (iii) Requires more covering material (iv) Requires less covering material The correct answer is (A) (i) and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv)

Last Answer : Option A

The spacing of stirrups in doubly reinforced beams should be least of the following (i)Least Lateral dimension (ii)Sixteen times the diameter of longitudinal steel (iii)Forty eight times the diameter of transverse reinforcement [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Description : The spacing of stirrups in doubly reinforced beams should be least of the following (i)Least Lateral dimension (ii)Sixteen times the diameter of longitudinal steel (iii)Forty eight times the diameter of transverse reinforcement [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Last Answer : [ D ] i, ii and iii

The spacing of stirrups in doubly reinforced beams should be least of the following (i)Least Lateral dimension (ii)Sixteen times the diameter of longitudinal steel (iii)Forty eight times the diameter of transverse reinforcement [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Description : The spacing of stirrups in doubly reinforced beams should be least of the following (i)Least Lateral dimension (ii)Sixteen times the diameter of longitudinal steel (iii)Forty eight times the diameter of transverse reinforcement [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Last Answer : [ D ] i, ii and iii