An arch with three hinges, is a structure (A) Statically determinate (B) Statically indeterminate (C) Geometrically unstable (D) Structurally sound but indeterminate

An arch with three hinges, is a structure
(A) Statically determinate
(B) Statically indeterminate
(C) Geometrically unstable
(D) Structurally sound but indeterminate
by

1 Answer

Answer :

(A) Statically determinate
by

Related questions

A three-hinged arch is said to be: (A) Statically determinate structure (B) Statically indeterminate structure (C) A bent beam (D) None of these

Description : A three-hinged arch is said to be:  (A) Statically determinate structure  (B) Statically indeterminate structure  (C) A bent beam  (D) None of these

Last Answer : (A) Statically determinate structure 

If in a rigid-jointed space frame, (6m + r) < 6j, then the frame is (A) Unstable (B) Stable and statically determinate (C) Stable and statically indeterminate (D) None of the above

Description : If in a rigid-jointed space frame, (6m + r) < 6j, then the frame is (A) Unstable (B) Stable and statically determinate (C) Stable and statically indeterminate (D) None of the above

Last Answer : (A) Unstable

If in a pin-jointed plane frame (m + r) > 2j, then the frame is (A) Stable and statically determinate (B) Stable and statically indeterminate (C) Unstable (D) None of the above

Description : If in a pin-jointed plane frame (m + r) > 2j, then the frame is (A) Stable and statically determinate (B) Stable and statically indeterminate (C) Unstable (D) None of the above

Last Answer : (B) Stable and statically indeterminate

Muller Breslau's principle for obtaining influence lines is applicable to (i) Trusses (ii) Statically determinate beams and frames (iii) Statically indeterminate structures, the material of which is elastic and follows Hooke's law (iv) Any statically indeterminate structure The correct answer is (A) (i), (ii) and (iii) (B) (i), (ii) and (iv) (C) (i) and (ii) (D) Only (i)

Description : Muller Breslau's principle for obtaining influence lines is applicable to (i) Trusses (ii) Statically determinate beams and frames (iii) Statically indeterminate structures, the material of which is elastic and follows Hooke's law (iv ... B) (i), (ii) and (iv) (C) (i) and (ii) (D) Only (i)

Last Answer : (A) (i), (ii) and (iii)

For a beam, if fundamental equations of statics are not sufficient to determine all the reactive forces at the supports, the structure is said to be (A) Determinate (B) Statically determinate (C) Statically indeterminate (D) None of these

Description : For a beam, if fundamental equations of statics are not sufficient to determine all the reactive forces at the supports, the structure is said to be (A) Determinate (B) Statically determinate (C) Statically indeterminate (D) None of these

Last Answer : (C) Statically indeterminate

A continuous beam is a. statically determinate b. statically indeterminate c.dynamically determinate d. statically redundant

Description : A continuous beam is a. statically determinate b. statically indeterminate c.dynamically determinate d. statically redundant

Last Answer : b. statically indeterminate

The Castigliano's second theorem can be used to compute deflections (A) In statically determinate structures only (B) For any type of structure (C) At the point under the load only (D) For beams and frames only

Description : The Castigliano's second theorem can be used to compute deflections (A) In statically determinate structures only (B) For any type of structure (C) At the point under the load only (D) For beams and frames only

Last Answer : (B) For any type of structure

The number of plastic hinges required in a structure of indeterminate status for a ‘mechanism’ to develop is (a) i (b) i + 1 ( c) i + 2 (d) i – 1 Where ‘i' is the degree of indeterminacy

Description : The number of plastic hinges required in a structure of indeterminate status for a ‘mechanism’ to develop is (a) i (b) i + 1 ( c) i + 2 (d) i – 1 Where ‘i' is the degree of indeterminacy

Last Answer : (b) i + 1

Castigliano's first theorem is applicable (A) For statically determinate structures only (B) When the system behaves elastically (C) Only when principle of superposition is valid(D) None of the above

Description : Castigliano's first theorem is applicable (A) For statically determinate structures only (B) When the system behaves elastically (C) Only when principle of superposition is valid (D) None of the above

Last Answer : (C) Only when principle of superposition is valid

A rigid-jointed plane frame is stable and statically determinate if (A) (m + r) = 2j (B) (m + r) = 3j (C) (3m + r) = 3j (D) (m + 3r) = 3j Where m is number of members, r is reaction components and j is number of joints

Description : A rigid-jointed plane frame is stable and statically determinate if (A) (m + r) = 2j (B) (m + r) = 3j (C) (3m + r) = 3j (D) (m + 3r) = 3j Where m is number of members, r is reaction components and j is number of joints

Last Answer : (C) (3m + r) = 3j

Stress in members of statically determinate simple frames, can be determined by (A) Method of joints (B) Method of sections (C) Graphical solution (D) All the above

Description : Stress in members of statically determinate simple frames, can be determined by (A) Method of joints (B) Method of sections (C) Graphical solution (D) All the above

Last Answer : (D) All the above

Influence lines are drawn for structures (A) Of any type (B) Statically determinate (C) Pin-jointed truss (D) None of these

Description : Influence lines are drawn for structures  (A) Of any type  (B) Statically determinate  (C) Pin-jointed truss  (D) None of these 

Last Answer : (A) Of any type 

Beams composed of more than one material, rigidly connected together so as to behave as one piece, are known as (A) Compound beams (B) Indeterminate beams (C) Determinate beams (D) Composite beams

Description : Beams composed of more than one material, rigidly connected together so as to behave as one  piece, are known as  (A) Compound beams  (B) Indeterminate beams  (C) Determinate beams  (D) Composite beams

Last Answer : (D) Composite beams

In a three hinged arch, the bending moment will be zero (A) At right hinge only (B) At left hinge only (C) At both right and left hinges (D) At all the three hinges

Description : In a three hinged arch, the bending moment will be zero (A) At right hinge only (B) At left hinge only (C) At both right and left hinges (D) At all the three hinges

Last Answer : (D) At all the three hinges

A three hinged arch is loaded with an isolated load 1000 kg at a horizontal distance of 2.5 m from the crown, 1 m above the level of hinges at the supports 10 metres apart. The horizontal thrust is (A) 1250 kg (B) 125 kg (C) 750 kg (D) 2500 kg

Description : A three hinged arch is loaded with an isolated load 1000 kg at a horizontal distance of 2.5 m from the crown, 1 m above the level of hinges at the supports 10 metres apart. The horizontal thrust is (A) 1250 kg (B) 125 kg (C) 750 kg (D) 2500 kg

Last Answer : (A) 1250 kg

A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a.Proportional to the coefficient of static friction b.Proportional to the coefficient of dynamic friction c.Indeterminate d.Determinate but depends on the acceleration of the cylinder e.None of the above

Description : A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a. ... c.Indeterminate d.Determinate but depends on the acceleration of the cylinder e.None of the above

Last Answer : c. Indeterminate

A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a.Indeterminate b.Proportional to the coefficient of dynamic friction c.Determinate but depends on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction

Description : A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a. ... on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction

Last Answer : c. Determinate but depends on the acceleration of the cylinder

Which of the following are statically determinate beams? (a) Only simply supported beams (b) Cantilever, overhanging and simply supported (c) Fixed beams (d) Continuous beams

Description : Which of the following are statically determinate beams? (a) Only simply supported beams (b) Cantilever, overhanging and simply supported (c) Fixed beams (d) Continuous beams

Last Answer : (b) Cantilever, overhanging and simply supported

Tomato varieties are mainly: a. Indeterminate type b. Determinate type c. Both types d. None of these

Description : Tomato varieties are mainly: a. Indeterminate type b. Determinate type c. Both types d. None of these

Last Answer : Both types

Transmission media are usually categorized as_______. A) fixed or unfixed B) guided orunguided C) determinate or indeterminate D) metallicor nonmetallic

Description : Transmission media are usually categorized as_______. A) fixed or unfixed B) guided orunguided C) determinate or indeterminate D) metallicor nonmetallic

Last Answer : guided orunguided

Transmission media are usually categorized as . a. Guided or Unguided b. Determinate or Indeterminate c. Fixed or Unfixed d. Encryption or Decryption

Description : Transmission media are usually categorized as . a. Guided or Unguided b. Determinate or Indeterminate c. Fixed or Unfixed d. Encryption or Decryption

Last Answer : a. Guided or Unguided

The equilibrium is unstable and indeterminate under A.Edgeworth modelB.Cournot ModelC.Sweezy ModelD.Pareto Model

Description : The equilibrium is unstable and indeterminate under A.Edgeworth model B.Cournot Model C.Sweezy Model D.Pareto Model

Last Answer : A.Edgeworth model

Why is the pointed arch in gothic architecture structurally more stable than the rounded arch used earlier?

Description : Why is the pointed arch in gothic architecture structurally more stable than the rounded arch used earlier?

Last Answer : its direct weight downward into the ground.....

By applying the static equations i.e. H V M = 0, to a determinate structure, we may determine (A) Supporting reactions only (B) Shear forces only (C) Bending moments only (D) All the above

Description : By applying the static equations i.e. H V M = 0, to a determinate structure, we may  determine  (A) Supporting reactions only  (B) Shear forces only  (C) Bending moments only  (D) All the above

Last Answer : (D) All the above

For similarity, in addition to models being geometrically similar to prototype, the following in both cases should also be equal (A) Ratio of inertial force to force due to viscosity (B) Ratio of inertial force to force due to gravitation (C) Ratio of inertial force to force due to surface tension (D) All the four ratios of inertial force to force due to viscosity, gravitation, surface tension, and elasticity

Description : For similarity, in addition to models being geometrically similar to prototype, the following in both cases should also be equal (A) Ratio of inertial force to force due to viscosity (B) ... the four ratios of inertial force to force due to viscosity, gravitation, surface tension, and elasticity

Last Answer : Answer: Option D

The three moments equation is applicable only when (A) The beam is prismatic (B) There is no settlement of supports (C) There is no discontinuity such as hinges within the span (D) The spans are equal

Description : The three moments equation is applicable only when (A) The beam is prismatic (B) There is no settlement of supports (C) There is no discontinuity such as hinges within the span (D) The spans are equal

Last Answer : (C) There is no discontinuity such as hinges within the span

The basic structure of cell membranes (a) Is a lipid bilayer that serves as a barrier to water soluble molecules (b) Differs ultra structurally for internal and external membranes of cell (c) Is best described as lipids dispersed within a protein bilayer (d) Is visualised as bilaminar structure with transmission electron microscopy

Description : The basic structure of cell membranes (a) Is a lipid bilayer that serves as a barrier to water soluble molecules (b) Differs ultra structurally for internal and external membranes ... dispersed within a protein bilayer (d) Is visualised as bilaminar structure with transmission electron microscopy

Last Answer : Ans:(a)

m1 and m2 are the members of two individual simple trusses of a compound truss. The compound truss will be rigid and determinate if (A) m = m1 + m2 (B) m = m1 + m2 + 1 (C) m = m1 + m2 + 2 (D) m = m1 + m2 + 3

Description : m1 and m2 are the members of two individual simple trusses of a compound truss. The compound  truss will be rigid and determinate if  (A) m = m1 + m2 (B) m = m1 + m2 + 1  (C) m = m1 + m2 + 2  (D) m = m1 + m2 + 3

Last Answer : (D) m = m1 + m2 + 3

The coach of a cricket team buys 3 bats and 6 balls for Rs 3900. Later, she buys another bat and 2 more balls of the same kind for Rs 1300. Represent this situation algebraically and geometrically. -Maths 10th

Description : The coach of a cricket team buys 3 bats and 6 balls for Rs 3900. Later, she buys another bat and 2 more balls of the same kind for Rs 1300. Represent this situation algebraically and geometrically. -Maths 10th

Last Answer : Step-by-step explanation: Let x be the cost of 1 bat Let y be the cost of 1 ball Cost of 3 bats = 3x Cost of 6 balls = 6y Cost of 3 balls = 3y The coach of a cricket team buys 3 ... 6 balls for ₹ 3900 She buys another bat and 3 more balls of the same kind for ₹1300. So, situation algebraically :

The cost of 2 kg of apples and 1 kg of grapes on a day was found to be Rs 160. After a month, the cost of 4 kg of apples and 2 kg of grapes is Rs 300. Represent the situation algebraically and geometrically. -Maths 10th

Description : The cost of 2 kg of apples and 1 kg of grapes on a day was found to be Rs 160. After a month, the cost of 4 kg of apples and 2 kg of grapes is Rs 300. Represent the situation algebraically and geometrically. -Maths 10th

Last Answer : y 20 40 60 80Let the cost of 1 kg of apples be x and that of 1 kg be y So the algebraic representation can be as follows: 2x+y=160 4x+2y=300⇒2x+y=150 The situation can be represented ... that the lines do not intersect anywhere, i.e. they are parallel. Hence we can not arrive at a solution.

What happens to the beamwidth of an antenna as the gain is increased? A. The beamwidth increases geometrically as the gain is increased. B. The beamwidth increases arithmetically as the gain is increased. C. The beamwidth is essentially unaffected by the gain of the antenna. D. The beamwidth decreases as the gain is increased.

Description : What happens to the beamwidth of an antenna as the gain is increased? A. The beamwidth increases geometrically as the gain is increased. B. The beamwidth increases arithmetically as the gain is increased ... unaffected by the gain of the antenna. D. The beamwidth decreases as the gain is increased.

Last Answer : D. The beamwidth decreases as the gain is increased.

Path followed by water jet issuing from the bottom of a water tank will be a (A) Parabola (vertex being at the opening) (B) Hyperbola (C) Horizontal straight line (D) Zig-zag path (which is geometrically undefined)

Description : Path followed by water jet issuing from the bottom of a water tank will be a (A) Parabola (vertex being at the opening) (B) Hyperbola (C) Horizontal straight line (D) Zig-zag path (which is geometrically undefined)

Last Answer : (A) Parabola (vertex being at the opening)

What reflecting surface forms a geometrically perfect image of a point source located at infinity (such as that approximated by a star)? w) Paraboloid x) Ellipsoid y) spherical z) Hyperboloid

Description : What reflecting surface forms a geometrically perfect image of a point source located at infinity (such as that approximated by a star)? w) Paraboloid x) Ellipsoid y) spherical z) Hyperboloid

Last Answer : ANSWER: W -- PARABOLOID

Pick up the incorrect statement from the following: (A) The retaining wall should be structurally capable to resist the applied earth pressure (B) The section of the retaining wall should be so proportioned that it may not overturn by the lateral pressure (C) The retaining wall should be safe against sliding (D) To drain off water from the earth retained, weep holes are provided near the top of the retaining wall

Description : Pick up the incorrect statement from the following: (A) The retaining wall should be structurally capable to resist the applied earth pressure (B) The section of the retaining wall should be so ... off water from the earth retained, weep holes are provided near the top of the retaining wall

Last Answer : Answer: Option D

Transition state structure of the substrate formed during an enzymatic reaction is (a) transient and unstable (b) permanent and stable (c) transient but stable (d) permanent but unstable.

Description : Transition state structure of the substrate formed during an enzymatic reaction is (a) transient and unstable (b) permanent and stable (c) transient but stable (d) permanent but unstable.

Last Answer : (a) transient and unstable

A three hinged arch is generally hinged at its supports and (A) At one quarter span (B) At the crown (C) Anywhere in the rib (D) None of these

Description : A three hinged arch is generally hinged at its supports and  (A) At one quarter span  (B) At the crown  (C) Anywhere in the rib  (D) None of these 

Last Answer : (C) Anywhere in the rib 

For determining the support reactions at A and B of a three hinged arch, points B and Care joined and produced to intersect the load line at D and a line parallel to the load line through A at D'. Distances AD, DD' and AD' when measured were 4 cm, 3 cm and 5 cm respectively. The angle between the reactions at A and B is (A) 30° (B) 45° (C) 60° (D) 90

Description : For determining the support reactions at A and B of a three hinged arch, points B and Care joined  and produced to intersect the load line at D and a line parallel to the load line through A at D'.  Distances AD, DD ... reactions at A and B is  (A) 30°  (B) 45°  (C) 60°  (D) 90

Last Answer : (D) 90

An isolated load W is acting at a distance a from the left hand support, of a three hinged arch of span 2l and rise h hinged at the crown, the horizontal reaction at the support, is (A) Wa/h (B) Wa/2h(C) 2W/ha(D) 2h/W

Description : An isolated load W is acting at a distance a from the left hand support, of a three hinged arch of  span 2l and rise h hinged at the crown, the horizontal reaction at the support, is  (A) Wa/h  (B) Wa/2h (C) 2W/ha (D) 2h/W

Last Answer : (B) Wa/2h

If a three hinged parabolic arch, (span l, rise h) is carrying a uniformly distributed load w/unit length over the entire span, (A) Horizontal thrust is wl2 /8h (B) S.F. will be zero throughout (C) B.M. will be zero throughout (D) All the above

Description : If a three hinged parabolic arch, (span l, rise h) is carrying a uniformly distributed load w/unit  length over the entire span,  (A) Horizontal thrust is wl2 /8h (B) S.F. will be zero throughout  (C) B.M. will be zero throughout  (D) All the above 

Last Answer : (D) All the above 

A three hinged parabolic arch hinged at the crown and springing, has a horizontal span of 4.8 m and a central rise of 1 m. It carries a uniformly distributed load of 0.75 tonne per metre over half left hand span. The horizontal thrust at the support will be (A) 10.8 tonnes (B) 1.08 tonnes (C) 1.8 tonnes (D) 0.8 tonnes

Description : A three hinged parabolic arch hinged at the crown and springing, has a horizontal span of 4.8 m  and a central rise of 1 m. It carries a uniformly distributed load of 0.75 tonne per metre over half  left hand span ... A) 10.8 tonnes  (B) 1.08 tonnes  (C) 1.8 tonnes  (D) 0.8 tonnes 

Last Answer : (B) 1.08 tonnes 

In a three hinged arch, the third hinge is generally kept at (A) Crown of the arch (B) Midpoint of the crown and left support hinge (C) Midpoint of the crown and right support hinge (D) None of these

Description : In a three hinged arch, the third hinge is generally kept at  (A) Crown of the arch  (B) Midpoint of the crown and left support hinge  (C) Midpoint of the crown and right support hinge  (D) None of these 

Last Answer : (A) Crown of the arch

In a three hinged arch, the shear force is usually (A) Maximum at crown(B) Maximum at springing (C) Maximum at quarter points (D) Varies with slope

Description : In a three hinged arch, the shear force is usually (A) Maximum at crown (B) Maximum at springing (C) Maximum at quarter points (D) Varies with slope

Last Answer : (B) Maximum at springing

If a three hinged parabolic arch carries a uniformly distributed load on its entire span, every section of the arch resists. (A) Compressive force (B) Tensile force (C) Shear force (D) Bending moment

Description : If a three hinged parabolic arch carries a uniformly distributed load on its entire span, every section of the arch resists. (A) Compressive force (B) Tensile force (C) Shear force (D) Bending moment

Last Answer : (A) Compressive force

A pointed arch which forms isosceles or equilateral triangle, is generally known as (A) Three centred arch (B) Two centred arch (C) Lancet arch (D) Bull's eye arch

Description : A pointed arch which forms isosceles or equilateral triangle, is generally known as (A) Three centred arch (B) Two centred arch (C) Lancet arch (D) Bull's eye arch

Last Answer : Answer: Option C

I can be opened but have no hinges. I am made of fragile material, but not wood, nor glass. What am I? -Riddles

Description : I can be opened but have no hinges. I am made of fragile material, but not wood, nor glass. What am I? -Riddles

Last Answer : A Cardboard Box.

I have no voice and yet I speak to you, I tell of all things in the world that people do. I have leaves, but I am not a tree, I have pages, but I am not a bride or royalty. I have a spine and hinges, but I am not a man or a door, I have told you all, I cannot tell you more. What am I? -Riddles

Description : I have no voice and yet I speak to you, I tell of all things in the world that people do. I have leaves, but I am not a tree, I have pages, but I am not a bride or royalty. I have a spine and hinges, but I am not a man or a door, I have told you all, I cannot tell you more. What am I? -Riddles

Last Answer : A Book.

What is the meaning of statically charged?

Description : What is the meaning of statically charged?

Last Answer : Something that is statically charged has had electrons added toor removed from it, thus giving it an overall electric charge.Extra electrons make for a negatively charged thing, and thestripping of electrons makes for a positively charged thing.

Beams of fixed types are statically indeterminant in which equations of equilibrium are a. incompatible b. insufficient c. incomplete d.complete

Description : Beams of fixed types are statically indeterminant in which equations of equilibrium are a. incompatible b. insufficient c. incomplete d.complete

Last Answer : b. insufficient

Explain statically induced EMF and Dynamically induced EMF with neat diagrams.

Description : Explain statically induced EMF and Dynamically induced EMF with neat diagrams.

Last Answer : Statically Induced EMF:- When changing magnetic field links with a stationary coil an emf is induced. This emf is called statically induced emf. Statically induced EMF is of two types: Self-induced ... cuts the field and an emf is induced. This emf is called dynamically induced emf.    

Compare statically induced emf with dynamically induced emf on any four points.

Description : Compare statically induced emf with dynamically induced emf on any four points.

Last Answer : Statically induced emf Dynamically induced emf Emf is induced without any relative motion between conductor and magnetic field. Emf is induced due to relative motion between conductor ... induced in transformer windings e.g emf induced in Generator, Alternator armature windings