A and B are two towers of equal height diametrically opposite on either side of the nadir point, at 3 km and 5 km distances. Which one of the following statements is correct? (A) Height displacement of A will be less than that of B (B) Height displacement of B will be less than that of A (C) Height displacement of A and B is equal (D) Height displacement of A and B will be towards each other

A and B are two towers of equal height diametrically opposite on either side of the nadir point,
at 3 km and 5 km distances. Which one of the following statements is correct?
(A) Height displacement of A will be less than that of B
(B) Height displacement of B will be less than that of A
(C) Height displacement of A and B is equal
(D) Height displacement of A and B will be towards each other
by

1 Answer

Answer :

Answer: Option A
by

Related questions

One of the Lehmann's rules of plane tabling, is (A) Location of the instrument station is always distant from each of the three rays from the known points in proportion to their distances (B) When looking in the direction of each of the given points, the instrument station will be on the right side of one and left side of the other ray (C) When the instrument station is outside the circumscribing circle its location is always on the opposite side of the ray to the most distant point as the inter-section of the other two rays (D) None of these

Description : One of the Lehmann's rules of plane tabling, is  (A) Location of the instrument station is always distant from each of the three rays from the  known points in proportion to their distances  ( ... to the most distant point as the inter-section of the other two rays  (D) None of these 

Last Answer : (A) Location of the instrument station is always distant from each of the three rays from the  known points in proportion to their distances 

Due to scan geometry of a satellite sensor: (A) The off-nadir resolution is degraded (B) The ground distance swept by the senor, IFOV is proportional to sec2 of scan measured from the nadir (C) The details towards the edge of the scan get compressed (D) All of these

Description : Due to scan geometry of a satellite sensor: (A) The off-nadir resolution is degraded (B) The ground distance swept by the senor, IFOV is proportional to sec2 of scan measured from the nadir (C) The details towards the edge of the scan get compressed (D) All of these

Last Answer : Answer: Option D

Select the correct statement. (A) A contour is not necessarily a closed curve. B) A contour represents a ridge line if the concave side of lower value contour lies towards the higher value contour (C) Two contours of different elevations do not cross each other except in case of an overhanging cliff (D) All of the above statements are correct

Description : Select the correct statement. (A) A contour is not necessarily a closed curve. B) A contour represents a ridge line if the concave side of lower value contour lies towards the higher value contour ... each other except in case of an overhanging cliff (D) All of the above statements are correct

Last Answer : (C) Two contours of different elevations do not cross each other except in case of an overhanging clif

Pick up the correct statement from the following: (A) For the same feature, the photograph taken from the satellite vertically above the aircraft, the height displacement is lesser than the aerial photograph (B) The scale of the aerial photograph depends upon the scale of the topography (C) The feature at the principal point has no height displacement (D) All of the above

Description : Pick up the correct statement from the following: (A) For the same feature, the photograph taken from the satellite vertically above the aircraft, the height displacement is lesser than the aerial photograph ... C) The feature at the principal point has no height displacement (D) All of the above

Last Answer : Answer: Option D

A simply supported beam carries two equal concentrated loads W at distances L/3 from either support. The maximum bending moment (A) WL/3 (B) WL/4 (C) 5WL/4 (D) 3WL/12

Description : A simply supported beam carries two equal concentrated loads W at distances L/3 from either support. The maximum bending moment (A) WL/3 (B) WL/4 (C) 5WL/4 (D) 3WL/12

Last Answer : (A) WL/3

The coefficients of permeability of soils of an unconfined aquifer and another confined aquifer were determined by pumping water from the wells and observing the effect of water table in two test wells at equal distances was found to be equal. The total height of confined aquifer H is given by (A) H = h2 - h1 (B) H = h1 - h2 (C) H = h2 + h1 (D) ½ (h1 + h2)

Description : The coefficients of permeability of soils of an unconfined aquifer and another confined aquifer were determined by pumping water from the wells and observing the effect of water table in two test wells at equal distances was found to be equal. ... (B) H = h1 - h2 (C) H = h2 + h1 (D) ½ (h1 + h2)

Last Answer : Answer: Option D

The moon is at a distance of 3.84 × 10^8 m from the Earth. If viewed from two diametrically opposite points on the Earth, the angle subtended

Description : The moon is at a distance of 3.84 × 10^8 m from the Earth. If viewed from two diametrically opposite points on the Earth, the angle subtended

Last Answer : The moon is at a distance of 3.84 108 m from the Earth. If viewed from two diametrically opposite ... is 1° 54′. What is the diameter of the Earth?

Jam nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and a hole in bolt and the two ends of split pin are separated and bent back on nut (C) A slot is cut in the middle of nut along the length and a cap screw is provided to tighten the two parts of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Description : Jam nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and ... parts of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Last Answer : (A) A smaller nut is tightened against main nut creating friction at the contacting surface

Castle nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and a hole in bolt and the two ends of split pin are separated and bent back on nut (C) A slot is cut in the middle of nut along the length and a cap screw is provided to tighten the two parts of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Description : Castle nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and ... of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Last Answer : (B) A split pin is passed through diametrically opposite slots in nut and a hole in bolt and the two ends of split pin are separated and bent back on nut

An electric current I enters and leaves a uniform circular wire of radius a through diametrically opposite points. A charged paricle q moving along th

Description : An electric current I enters and leaves a uniform circular wire of radius a through diametrically opposite points. A charged paricle q moving along th

Last Answer : An electric current I enters and leaves a uniform circular wire of radius a through diametrically opposite points. A ... `qv(mu_(0)i)/(a)` D. zero

DGPS is based on the concept that bias errors in the position of locations in a given local area, are same if their distances are within (A) 25 km (B) 50 km (C) 75 km (D) 100 km

Description : DGPS is based on the concept that bias errors in the position of locations in a given local area, are same if their distances are within (A) 25 km (B) 50 km (C) 75 km (D) 100 km

Last Answer : Answer: Option D

To ensure that the hogging bending moment at two points of suspension of a pile of length L equals the sagging moment at its centre, the distances of the points of suspension from either end, is (A) 0.107 L (B) 0.207 L (C) 0.307 L (D) 0.407 L

Description : To ensure that the hogging bending moment at two points of suspension of a pile of length L equals the sagging moment at its centre, the distances of the points of suspension from either end, is (A) 0.107 L (B) 0.207 L (C) 0.307 L (D) 0.407 L

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) Safety fences are provided on either side of a roadway if embankments are in excess of 6 metres (B) Safety fences are provided on outside of the curves of radii less than 750 m if the embankments are between 3 metres and 6 metres (C) Guard stones are provided at 2.5 metres intervals if embankments are between 1.6 metres to 3 metres (D) All the above

Description : Pick up the correct statement from the following: (A) Safety fences are provided on either side of a roadway if embankments are in excess of 6 metres (B) Safety fences are provided on outside of the ... 2.5 metres intervals if embankments are between 1.6 metres to 3 metres (D) All the above

Last Answer : Answer: Option D

Busses start from a bus terminal with a speed of 20 km/hr at intervals of 10 minutes. What is the speed of a man coming from the opposite direction towards the bus terminal if he meets the buses at intervals of 8 minutes? a) 3 km/hr b) 4 km/hr c) 5 km/hr d) 7 km/hr e) None of these

Description : Busses start from a bus terminal with a speed of 20 km/hr at intervals of 10 minutes. What is the speed of a man coming from the opposite direction towards the bus terminal if he meets the buses at intervals of 8 minutes? a) 3 km/hr b) 4 km/hr c) 5 km/hr d) 7 km/hr e) None of these

Last Answer : Distance covered in 10 minutes at 20 kmph = distance covered in 8 minutes at (20+x) kmph 20× 10/60=8/60(20+x) 200 = 160 + 8x 8x = 40 x=40/8=5 kmph Answer: c)

The maximum displacement of the particle on either side of the equilibrium position is called

Description : The maximum displacement of the particle on either side of the equilibrium position is called

Last Answer : amplitude.

The maximum displacement of a vibrating body on either side of its central position is known as _______________. a)amplitude b)frequency c)time period d)hertz

Description : The maximum displacement of a vibrating body on either side of its central position is known as _______________. a)amplitude b)frequency c)time period d)hertz

Last Answer : a)amplitude

Flow through period, in sedimentation tanks, is (A) Equal to detention period (B) More than detention period (C) Less than detention period (D) Detention period divided by displacement efficiency

Description : Flow through period, in sedimentation tanks, is  (A) Equal to detention period  (B) More than detention period  (C) Less than detention period  (D) Detention period divided by displacement efficiency 

Last Answer : (C) Less than detention period 

Dead weight tonnage of a ship (i) Varies with latitude and season (ii) Is more than displacement tonnage (iii) Is the difference between displacement load and displacement light Of these statements (A) i) and ii) are correct (B) ii) and iii) are correct (C) i) and iii) are correct (D) Only iii) is correct

Description : Dead weight tonnage of a ship (i) Varies with latitude and season (ii) Is more than displacement tonnage (iii) Is the difference between displacement load and displacement light Of these statements (A) i) ... ii) and iii) are correct (C) i) and iii) are correct (D) Only iii) is correct

Last Answer : (C) i) and iii) are correct

The true meridian of a place is the line in which earth's surface is intersected by a plane through (A) East and west points (B) Zenith and nadir points (C) North and south geographical poles (D) North and south magnetic poles

Description : The true meridian of a place is the line in which earth's surface is intersected by a plane through (A) East and west points (B) Zenith and nadir points (C) North and south geographical poles (D) North and south magnetic poles

Last Answer : (C) North and south geographical poles

Consider the following statements: 1. Friction piles are also called floating piles 2. Minimum number of piles to qualify as a pile group is three. 3. The group efficiency of a pile group may be either less than 100% or more than 100%. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. Friction piles are also called floating piles 2. Minimum number of piles to qualify as a pile group is three. 3. The group efficiency of a pile group may be either less than 100% or more than 100%. ... ) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (a) 1, 2 & 3

A man walks 3 Km to his East then turns left and walks 3 Km towards North then turns left and walks 3Km towards West Indicate the correct direction in which he is in relation to his starting point: A. East B. West C. South D. North

Description : A man walks 3 Km to his East then turns left and walks 3 Km towards North then turns left and walks 3Km towards West Indicate the correct direction in which he is in relation to his starting point: A. East B. West C. South D. North

Last Answer : ANSWER: B

A man walks 3 Km to his East then turns left and walks 3 Km towards North then turns left and walks 3Km towards West Indicate the correct direction in which he is in relation to his starting point: A. East B. West C. South D. North

Description : A man walks 3 Km to his East then turns left and walks 3 Km towards North then turns left and walks 3Km towards West Indicate the correct direction in which he is in relation to his starting point: A. East B. West C. South D. North

Last Answer : ANSWER: B

When H is the flight height, R is the appropriate radial measure and d is the relief displacement, the vertical height of an object appearing on an aerial photograph is

Description : When H is the flight height, R is the appropriate radial measure and d is the relief displacement, the vertical height of an object appearing on an aerial photograph is

Last Answer : dH/R

Palliation refers to a) relief of symptoms associated with cancer. Palliation is the goal for care in terminal cancer patients. b) hair loss. Alopecia is the term that refers to hair loss. c) the spread of cancer cells from the primary tumor to distant sites. Metastasis is the term that refers to the spread of cancer cells from the primary tumor to distant sites. d) the lowest point of white blood cell depression after therapy that has toxic effects on the bone marrow. Nadir is the term that refers to the lowest point of white blood cell depression after therapy that has toxic effects on the bone marrow.

Description : Palliation refers to a) relief of symptoms associated with cancer. Palliation is the goal for care in terminal cancer patients. b) hair loss. Alopecia is the term that refers to hair loss. c) ... the lowest point of white blood cell depression after therapy that has toxic effects on the bone marrow.

Last Answer : a) relief of symptoms associated with cancer. Palliation is the goal for care in terminal cancer patients.

2 bus start from A & B respectively and travel towards each other at a speed of 150 km/hr and 120 km/hr respectively. By the time they meet, the first bus has travelled by 300km more than the second. The distance between A & B is a) 2700 b) 2800 c) 2750 d) 2457

Description : 2 bus start from A & B respectively and travel towards each other at a speed of 150 km/hr and 120 km/hr respectively. By the time they meet, the first bus has travelled by 300km more than the second. The distance between A & B is a) 2700 b) 2800 c) 2750 d) 2457

Last Answer : A At the time of meeting, Let the distance travelled by the second bus be xkm Then distance covered by the 1st bus is (x+300)km x/120= (x+300) /150 150x = 120(x+300) 150x = 120x +36000 30x = ... X=36000/30 X=1200 So the distance covered between A & B =(x+x+300) =(1200+1200+300) =2700km.

A uniform wire of resistance `9 Omega` is joined end-to-end to from a circule. Then, the resistance of the circular wire between any two diametrically

Description : A uniform wire of resistance `9 Omega` is joined end-to-end to from a circule. Then, the resistance of the circular wire between any two diametrically

Last Answer : A uniform wire of resistance `9 Omega` is joined end-to-end to from a circule. Then, the resistance of the ... (9)/(4)Omega` D. `(3)/(2)Omega`

What do you do when your Facebook friends post political or religious items that are diametrically opposed to your personal beliefs/philosophies?

Description : What do you do when your Facebook friends post political or religious items that are diametrically opposed to your personal beliefs/philosophies?

Last Answer : answer:Ignore it and move on. Simple, quick, and avoids unnecessary confrontation. If you feel like you have to say something about this or you'll burst because it's just sooooooo offensive, ... might just lead to fighting with a friend over something inconsequential in the grand scheme of things.

This type of transmission permits communication in the frequency range from 30 to 60 MHz and over distances from about 1000 to 2000 km. A. Troposcatter B. Ionospheric scatter C. Ducting D. Microwave

Description : This type of transmission permits communication in the frequency range from 30 to 60 MHz and over distances from about 1000 to 2000 km. A. Troposcatter B. Ionospheric scatter C. Ducting D. Microwave

Last Answer : B. Ionospheric scatter

Type of transmission path that permits communication in the frequency range from 30 to 60 MHz and over distances form about 1000 to 2000 km. A. Ducting B. Ionospheric scatter C. Microwave D. Troposcatter

Description : Type of transmission path that permits communication in the frequency range from 30 to 60 MHz and over distances form about 1000 to 2000 km. A. Ducting B. Ionospheric scatter C. Microwave D. Troposcatter

Last Answer : B. Ionospheric scatter

Transmission voltage of ll kV is normally used for distances upto (a) 20—25 km (b) 40—50 km (c) 60—70 km (d) 80—100 km

Description : Transmission voltage of ll kV is normally used for distances upto (a) 20—25 km (b) 40—50 km (c) 60—70 km (d) 80—100 km

Last Answer : (a) 20—25 km

Eight persons P, Q, R, S, W, X, Y and Z in which 4 females are facing towards and 4 males facing away from the center. Males and females are seated alternately. I. X is male, W position is 3rd to the right of X and exactly opposite to Q. II. P is 2nd to the left of W. III. S and R are facing each other as well R & Y are neighbors. Which of the following is correct for neighbors? a) X, W b) R, X c) S, W d) P, S

Description : Eight persons P, Q, R, S, W, X, Y and Z in which 4 females are facing towards and 4 males facing away from the center. Males and females are seated alternately. I. X is male, W position is 3rd to the right of X ... . Which of the following is correct for neighbors? a) X, W b) R, X c) S, W d) P, S

Last Answer : Ans: option (d)

Pressure drop through plate tower as compared to that through packed tower, for the same duty will be (A) Less (B) More (C) Equal (D) Either (A) or (B); depends on the packing height

Description : Pressure drop through plate tower as compared to that through packed tower, for the same duty will be (A) Less (B) More (C) Equal (D) Either (A) or (B); depends on the packing height

Last Answer : (B) More

There are two points on a highway a,b. They are 70 km apart. An auto starts from A and another auto starts from B simultaneously. If they travel in the same direction, they meet in 7 hours, but if they travel towards each other they meet in 1 hour. Find how fast the two autos are -Maths 10th

Description : There are two points on a highway a,b. They are 70 km apart. An auto starts from A and another auto starts from B simultaneously. If they travel in the same direction, they meet in 7 hours, but if they travel towards each other they meet in 1 hour. Find how fast the two autos are -Maths 10th

Last Answer : When they travel in same direction, suppose they meet when B travels for x m, then A will have travelled 70+x m in the same time Since, Speed =TimeDistance Speed of auto at A =7x+70 And Speed of auto at B =7x ... So, Speed of auto at A =7x+70 =7280 =40km/hr Speed of auto at B =7x =7210 =30km/hr

Which of the following statements are true about eccentrically loaded circular base? a) All bolts are symmetrically spaced with equal angle on either side of vertical b) Bolts are not preloaded c) Bearing is rigid d) Dowel pins are used to relieve stresses

Description : Which of the following statements are true about eccentrically loaded circular base? a) All bolts are symmetrically spaced with equal angle on either side of vertical b) Bolts are not preloaded c) Bearing is rigid d) Dowel pins are used to relieve stresses

Last Answer : a) All bolts are symmetrically spaced with equal angle on either side of vertical

Pick up the correct statement from the following: (A) In remote sensing technique, the observation place, is called a platform (B) Platforms may be either stationary or mobile (C) Spatial resolution of the imaging system becomes poorer with increase of platform height (D) All of these

Description : Pick up the correct statement from the following: (A) In remote sensing technique, the observation place, is called a platform (B) Platforms may be either stationary or mobile (C) Spatial resolution of the imaging system becomes poorer with increase of platform height (D) All of these

Last Answer : Answer: Option D

Pick out the wrong statement. (A) With decrease in feed temperature, the number of plates required for binary distillation decreases for a given ‘L/V’ ratio (B) The extraction per unit of total height for a short packed column is more effective than for a tall column, in case of liquid-liquid extraction(C) Natural draft cooling towers are made of ferroconcrete and its cross￾section is wider at the bottom(D) Vander wall adsorption is also called chemisorption

Description : Pick out the wrong statement. (A) With decrease in feed temperature, the number of plates required for binary distillation decreases for a given L/V' ratio (B) The extraction per unit ... and its cross￾section is wider at the bottom (D) Vander wall adsorption is also called chemisorption

Last Answer : (D) Vander wall adsorption is also called chemisorption

If a ‘vertical aerial photograph’, (20 cm x 20 cm) in size, on a R.F.I: 10,000, has 60% longitudinal overlap and 40% side overlap, the actual ground length covered by each photograph in the longitudinal direction of the flight will be : (a) 4 km (b) 6 km (c) 0.8 km (d) 0.4 km

Description : If a ‘vertical aerial photograph’, (20 cm x 20 cm) in size, on a R.F.I: 10,000, has 60% longitudinal overlap and 40% side overlap, the actual ground length covered by each photograph in the longitudinal direction of the flight will be : (a) 4 km (b) 6 km (c) 0.8 km (d) 0.4 km

Last Answer : .8

The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Description : The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Last Answer : (A) Chain surveying

The operation of resection involves the following steps 1. Rough orientation of the plane table 2. The three lines form a triangle of error 3. Drawing lines back through the three control points 4. Select a point in the triangle of error such that each ray is equally rotated either clockwise or anti clockwise 5. The points obtained by three rays are the correct location. The correct sequence is (A) 1, 3, 2, 4, 5 (B) 1, 2, 3, 4, 5 (C) 1, 4, 3, 2, 5 (D) 1, 3, 2, 4, 5

Description : The operation of resection involves the following steps 1. Rough orientation of the plane table 2. The three lines form a triangle of error 3. Drawing lines back through the three control points 4. Select a point in the triangle of error ... 2, 3, 4, 5 (C) 1, 4, 3, 2, 5 (D) 1, 3, 2, 4, 5

Last Answer : (A) 1, 3, 2, 4, 5

Mathematically, the ellipse is a curve generated by a point moving in space such that atany position the sum of its distances from two fixed points (foci) is constant and equal to a.the major diameter b.the minor diameter c.semi major diameter d.semi-minor diameter

Description : Mathematically, the ellipse is a curve generated by a point moving in space such that atany position the sum of its distances from two fixed points (foci) is constant and equal to a.the major diameter b.the minor diameter c.semi major diameter d.semi-minor diameter

Last Answer : a.the major diameter

Mathematically, the ellipse is a curve generated by a point moving in space such thatat any position the sum of its distances from two fixed points (foci) is constant and equal to a.the major diameter b.the minor diameter c.semi major diameter d.semi-minor diameter

Description : Mathematically, the ellipse is a curve generated by a point moving in space such thatat any position the sum of its distances from two fixed points (foci) is constant and equal to a.the major diameter b.the minor diameter c.semi major diameter d.semi-minor diameter

Last Answer : a.the major diameter

In a roll crusher, both the rolls (A) Have the same diameter (B) Are rotated towards each other (C) Run either at the same or different speeds (D) All (A), (B) and (C

Description : In a roll crusher, both the rolls (A) Have the same diameter (B) Are rotated towards each other (C) Run either at the same or different speeds (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

Which one of the following statements is correct regarding the GPS satellites? (A) The nominal altitude is about 20,200 km (B) The inclination of axis satellite is 55° (C) The satellite transmits two L band signals (L1 with 1575.42 MHz and L2 with 1276.6 MHz) (D) All of these

Description : Which one of the following statements is correct regarding the GPS satellites? (A) The nominal altitude is about 20,200 km (B) The inclination of axis satellite is 55° (C) The satellite transmits two L band signals (L1 with 1575.42 MHz and L2 with 1276.6 MHz) (D) All of these

Last Answer : Answer: Option D

A man walk 10 m towards east, then 40 m towards North and in the last 30 m towards west find the net displacement :-

Description : A man walk 10 m towards east, then 40 m towards North and in the last 30 m towards west find the net displacement :-

Last Answer : A man walk 10 m towards east, then 40 m towards North and in the last 30 m towards west find the net displacement : ... 5 m` C. 30 m D. `30 sqrt 5 m`

A man walks 30 m towards north, then 20 m, towards east and in the last `30sqrt(2)` m towards south - west. The displacement from origin is :

Description : A man walks 30 m towards north, then 20 m, towards east and in the last `30sqrt(2)` m towards south - west. The displacement from origin is :

Last Answer : A man walks 30 m towards north, then 20 m, towards east and in the last `30sqrt(2)` m towards ... north west D. `60 sqrt 2m`. Towards north east

SHM is the motion in which acceleration of the body is proportional to its displacement and directed towards the mean position. A. True B. False C. Neither True Nor False D. None

Description : SHM is the motion in which acceleration of the body is proportional to its displacement and directed towards the mean position. A. True B. False C. Neither True Nor False D. None

Last Answer : A. True

Hyperbolic cooling towers are made up of high height reinforced ………structure. a) plastic c)metal b) alloy d) concrete

Description : Hyperbolic cooling towers are made up of high height reinforced ………structure. a) plastic c)metal b) alloy d) concrete

Last Answer : concrete