A dumpy level is set up with its eye-piece vertically over a peg . The height from the top of peg to the centre of the eye-piece is 1.540 m and the reading on peg is 0.705 m. The level is then setup over . The height of the eye-piece above peg is 1.490 m and a reading on is 2.195 m. The difference in level between and is (A) 2.900 m (B) 3.030 m (C) 0.770 m (D) 0.785 m

A dumpy level is set up with its eye-piece vertically over a peg . The height from the top of
peg to the centre of the eye-piece is 1.540 m and the reading on peg is 0.705 m. The level is
then setup over . The height of the eye-piece above peg is 1.490 m and a reading on is
2.195 m. The difference in level between and is
(A) 2.900 m
(B) 3.030 m
(C) 0.770 m
(D) 0.785 m
by

1 Answer

Answer :

(C) 0.770 m
by

Related questions

A level when set up 25 m from peg A and 50 m from peg B reads 2.847 on a staff held on A and 3.462 on a staff held on B, keeping bubble at its centre while reading. If the reduced levels of A and B are 283.665 m and 284.295 m respectively, the collimation error per 100 m is (A) 0.015 m (B) 0.030 m (C) 0.045 m (D) 0.060 m

Description : A level when set up 25 m from peg A and 50 m from peg B reads 2.847 on a staff held on A and 3.462 on a staff held on B, keeping bubble at its centre while reading. If the reduced levels of A and B are 283.665 m ... collimation error per 100 m is (A) 0.015 m (B) 0.030 m (C) 0.045 m (D) 0.060 m

Last Answer : (D) 0.060 m

Which one of the following statements is not correc t? (a) Parallax error is eliminated when there is no change in the staff reading when eye is moved up and down (b) The objective lens is to be focused towards a white or bright background for clear visibility of cross-hairs (c) Temporary adjustments of the dumpy level are to be performed at every set up (d) The eyepiece need not be adjusted after the first set up when the same surveyor is taking readings

Description : Which one of the following statements is not correc t? (a) Parallax error is eliminated when there is no change in the staff reading when eye is moved up and down (b) The objective lens is ... (d) The eyepiece need not be adjusted after the first set up when the same surveyor is taking readings

Last Answer : (b) The objective lens is to be focused towards a white or bright background for clear visibility of cross-hairs

A dumpy level was set up at mid-point between pegs A and B, 80 m apart and the staff readings were 1.32 and 1.56. When the level was set up at a point 10 m from A on BA produced, the staff readings obtained at A and B were 1.11 and 1.39. The correct staff reading from this set up at S should be (A) 1.435 (B) 1.345 (C) 1.425 (D) None of these

Description : A dumpy level was set up at mid-point between pegs A and B, 80 m apart and the staff readings were 1.32 and 1.56. When the level was set up at a point 10 m from A on BA produced, the staff readings obtained at A ... this set up at S should be (A) 1.435 (B) 1.345 (C) 1.425 (D) None of these

Last Answer : (B) 1.345

The back staff reading on a B.M. of R.L. 500.000 m is 2.685 m. If foresight reading on a point is 1.345 m, the reduced level of the point, is (A) 502.685 m (B) 501.345 m (C) 501.340 m (D) 504.030 m

Description : The back staff reading on a B.M. of R.L. 500.000 m is 2.685 m. If foresight reading on a point is 1.345 m, the reduced level of the point, is (A) 502.685 m (B) 501.345 m (C) 501.340 m (D) 504.030 m

Last Answer : (C) 501.340 m

ange of wavelength of visible light ∙ A. 670 nm to 10^3 nm ∙ B. 440 nm to 540 nm ∙ C. 110 nm to 240 nm ∙ D. 390 nm to 770 nm

Description : ange of wavelength of visible light ∙ A. 670 nm to 10^3 nm ∙ B. 440 nm to 540 nm ∙ C. 110 nm to 240 nm ∙ D. 390 nm to 770 nm

Last Answer : D. 390 nm to 770 nm

A dumpy level was set up at the midpoint between two pegs A and B, 50 m apart and the staff readings at and were 1.22 and 1.06. With the level set up at , the readings at and were 1.55 and 1.37. The collimation error per 100 m length of sight is (A) 0.02 m inclined upwards (B) 0.04 m inclined downwards (C) 0.04 m inclined upward (D) None of these

Description : A dumpy level was set up at the midpoint between two pegs A and B, 50 m apart and the staff  readings at and were 1.22 and 1.06. With the level set up at , the readings at  and were 1.55 and ... upwards  (B) 0.04 m inclined downwards  (C) 0.04 m inclined upward  (D) None of these

Last Answer : (B) 0.04 m inclined downwards 

The specific gravity of urine normally ranges from (A) 0.900–0.999 (B) 1.003–1.030 (C) 1.000–1.001 (D) 1.101–1.120

Description : The specific gravity of urine normally ranges from (A) 0.900–0.999 (B) 1.003–1.030 (C) 1.000–1.001 (D) 1.101–1.120

Last Answer : B

A bullet is fired vertically upwards with a velocity of 2200 ft/s. Bullet ascends to a height of a.56,900 ft b.107 dynes c.75,000 ft d.48.300 ft e.65,800 ft

Description : A bullet is fired vertically upwards with a velocity of 2200 ft/s. Bullet ascends to a height of a.56,900 ft b.107 dynes c.75,000 ft d.48.300 ft e.65,800 ft

Last Answer : c. 75,000 ft

worker is allowed 60 hours to complete the job on a guaranteed wage of Rs. 10 per hour. Under the Rowan Plan, he gets an hourly wage of Rs. 12 per hour. For the same saving in time, how much he will get under the Halsey Plan? (a) Rs. 720 (b) Rs. 540 (c) Rs. 600 (d) Rs. 900

Description : worker is allowed 60 hours to complete the job on a guaranteed wage of Rs. 10 per hour. Under  the Rowan Plan, he gets an hourly wage of Rs. 12 per hour. For the same saving in time, how much he  will get under the Halsey Plan? (a) Rs. 720 (b) Rs. 540 (c) Rs. 600  (d) Rs. 900

Last Answer : (b) Rs. 540

Draw a sketch and explain how to find height of chajja or slab using dumpy level.

Description : Draw a sketch and explain how to find height of chajja or slab using dumpy level.

Last Answer : Explanation : 1. First the back sight reading is taken on floor level whose RL is known to us; from which RL of instrument axis can be find out by adding RL of BM and BS reading. 2. Now ... staff reading. 4. Finally height of chajja is calculated as RL of slab bottom -  RL of floor top.

Dumpy level is most suitable when (A) The instrument is to be shifted frequently (B) Fly levelling is being done over long distance (C) Many readings are to be taken from a single setting of the instrument (D) All of the above

Description : Dumpy level is most suitable when (A) The instrument is to be shifted frequently (B) Fly levelling is being done over long distance (C) Many readings are to be taken from a single setting of the instrument (D) All of the above

Last Answer : (C) Many readings are to be taken from a single setting of the instrument

The staff reading at a distance of 80 m from a level with the bubble at its centre is 1.31 m. When the bubble is moved by 5 divisions out of the centre, the reading is 1.39 m. The angular value of the one division of the bubble, is (A) 28.8 sec (B) 41.25 sec (C) 14.52 sec (D) 25.05

Description : The staff reading at a distance of 80 m from a level with the bubble at its centre is 1.31 m. When the bubble is moved by 5 divisions out of the centre, the reading is 1.39 m. The angular value of the one division of the bubble, is (A) 28.8 sec (B) 41.25 sec (C) 14.52 sec (D) 25.05

Last Answer : (B) 41.25 sec

What is the purpose of either 'setpoint module' (6000F090/030) shown in the illustration? EL-0094 A. Program the 'signal conditioner' as to how to vary its input. B. Supply 0 - 10 volts to the 'signal conditioner'. C. Initiate logging of measured information at set intervals; for example, each hour. D. Obtain an input from the 'signal conditioner' and, if outside set limits, signals the 'annunciator'.

Description : What is the purpose of either 'setpoint module' (6000F090/030) shown in the illustration? EL-0094 A. Program the 'signal conditioner' as to how to vary its input. B. Supply 0 - 10 volts to ... . Obtain an input from the 'signal conditioner' and, if outside set limits, signals the 'annunciator'.

Last Answer : Answer: D

Cross hairs in surveying telescopes, are fitted (A) In the objective glass (B) At the centre of the telescope (C) At the optical centre of the eye piece (D) In front of the eye piece

Description : Cross hairs in surveying telescopes, are fitted (A) In the objective glass (B) At the centre of the telescope (C) At the optical centre of the eye piece (D) In front of the eye piece

Last Answer : (D) In front of the eye piece

The real image of an object formed by the objective must lie (A) In the plane of cross hairs (B) At the centre of the telescope (C) At the optical centre of the eye-piece (D) Anywhere inside the telescope

Description : The real image of an object formed by the objective must lie (A) In the plane of cross hairs (B) At the centre of the telescope (C) At the optical centre of the eye-piece (D) Anywhere inside the telescope

Last Answer : (A) In the plane of cross hairs

In a perfect prismatic compass (A) Magnetic axis and geometric axis of the needle coincide (B) Ends of the needle and pivot are in same vertical and horizontal planes (C) Pivot is vertically over the centre of the graduated circle (D) All the above

Description : In a perfect prismatic compass (A) Magnetic axis and geometric axis of the needle coincide (B) Ends of the needle and pivot are in same vertical and horizontal planes (C) Pivot is vertically over the centre of the graduated circle (D) All the above

Last Answer : (D) All the above

In a 200-ml sample of 0.030 M Na3P04 what is the concentration of Na plus?

Description : In a 200-ml sample of 0.030 M Na3P04 what is the concentration of Na plus?

Last Answer : 200 mL sample of 0,030 M Na3P04 contain 0,414 g sodium; the concentration of Na is 2,07 g/L.

A horse is tied to a peg hammered at one of the corner of a rectangular grass field of 40 m by 24 m by a rope 14 m long. Over how much area of the field can the horse graze? (1) 154 m2 (2) 308 m2 (3) 240 m2 (4) 480 m2

Description : A horse is tied to a peg hammered at one of the corner of a rectangular grass field of 40 m by 24 m by a rope 14 m long. Over how much area of the field can the horse graze? (1) 154 m2 (2) 308 m2 (3) 240 m2 (4) 480 m2

Last Answer : (1) 154 m2

In above case the maximum height attained by the ball would be a.49 cm b.490 cm c.980 cm d.1960 cm e.100 cm

Description : In above case the maximum height attained by the ball would be a.49 cm b.490 cm c.980 cm d.1960 cm e.100 cm

Last Answer : b. 490 cm

A mass of 5 kg moves on a smooth horizontal plane with a speed of 8 m/s attached to a fixed point on the plane by a string of length 4m. Tension in the string is a.785 b.80N c.392.4N d.None of the above e.Tapered bearing

Description : A mass of 5 kg moves on a smooth horizontal plane with a speed of 8 m/s attached to a fixed point on the plane by a string of length 4m. Tension in the string is a.785 b.80N c.392.4N d.None of the above e.Tapered bearing

Last Answer : b. 80N

What are these in increasing order of length 785 m 884mm 432 cm?

Description : What are these in increasing order of length 785 m 884mm 432 cm?

Last Answer : I suggest you convert them all to a common unit (for instance,convert everything to meters). Then you can easily comparethem.

R.L. of floor at a building is 74.4 m, staff reading on the floor is 1.625 and staff reading when it is held inverted with bottom touching the ceiling of a hall is 2.870; then the height of the ceiling above the floor is (a) 3.593 m (b) 3.953 m (c) 4.495 m (d) 4. 594 m

Description : R.L. of floor at a building is 74.4 m, staff reading on the floor is 1.625 and staff reading when it is held inverted with bottom touching the ceiling of a hall is 2.870; then the height of the ceiling above the floor is (a) 3.593 m (b) 3.953 m (c) 4.495 m (d) 4. 594 m

Last Answer : (c) 4.495 m

Dumpy level is most suitable when (a) The instrument is to be shifted frequently (b) Fly leveling is being done over long distance (c) Many readings are to be taken from a single setting of the instrument* (d) All of the above

Description : Dumpy level is most suitable when (a) The instrument is to be shifted frequently (b) Fly leveling is being done over long distance (c) Many readings are to be taken from a single setting of the instrument* (d) All of the above

Last Answer : (c) Many readings are to be taken from a single setting of the instrument*

State advantages of Auto-Level over dumpy level.

Description : State advantages of Auto-Level over dumpy level. 

Last Answer : 1) Auto level gives quick and easy leveling with less effort than dumpy level. 2) It is most accurate and precise which gives least error about 0.5 to 0.8 in 5 km. 3) It is simply ... readings to read; which reflects inverted in some dumpy level. 5) It gives more operational comfort to surveyor. 

State any two advantages of total station over dumpy level and theodolite.

Description : State any two advantages of total station over dumpy level and theodolite.

Last Answer : Advantages of total station over dumpy level and theodolite :- 1) Total station gives digital measurements of sloping, horizontal and vertical distances accurately and precisely. 2) Total station gives ... data to computer. 6) Total station used to prepare the map and drawings using softwares.

State any four advantages of total station over dumpy level and theodolite.

Description : State any four advantages of total station over dumpy level and theodolite.

Last Answer : Advantages of total station over dumpy level and theodolite : 1)Total station gives digital measurements of sloping, horizontal and vertical distances aaccurately and precisely. 2) Total station gives digital ... computer. 6) Total station is used to prepare the map and drawings using softwares.

The depth of centre of pressure (h) for a vertically immersed surface from the liquid surface is given by (where IG = Moment of inertia of the immersed surface about horizontal axis through its centre of gravity, A = Area of immersed surface, and x = Depth of centre of gravity of the immersed surface from the liquid surface) (A) (IG/ ) - (B) (IG/ ) - (C) ( /IG) + (D) (IG/ ) +

Description : The depth of centre of pressure (h) for a vertically immersed surface from the liquid surface is given by (where IG = Moment of inertia of the immersed surface about horizontal axis through its centre of gravity, A = Area of immersed surface, ... (IG/ ) - (B) (IG/ ) - (C) ( /IG) + (D) (IG/ ) +

Last Answer : Answer: Option D

A vertically immersed surface is shown in the below figure. The distance of its centre of pressure from the water surface is (A) (bd²/12) + (B) (d²/12 ) + (C) b²/12 + (D) d²/12 +

Description : A vertically immersed surface is shown in the below figure. The distance of its centre of pressure from the water surface is (A) (bd²/12) + (B) (d²/12 ) + (C) b²/12 + (D) d²/12 +

Last Answer : Answer: Option B

Potentiometer wire of length `1 m` is connected in series with `490 Omega` resistance and `2 V` battery. If `0.2 mV/cm` is the potential gradient, the

Description : Potentiometer wire of length `1 m` is connected in series with `490 Omega` resistance and `2 V` battery. If `0.2 mV/cm` is the potential gradient, the

Last Answer : Potentiometer wire of length `1 m` is connected in series with `490 Omega` resistance and `2 V` battery. If ... 7.9Omega` C. `5.9Omega` D. `6.9Omega`

The line of action of the buoyant force acts through the (A) Centroid of the volume of fluid vertically above the body (B) Centre of the volume of floating body (C) Center of gravity of any submerged body (D) Centroid of the displaced volume of fluid

Description : The line of action of the buoyant force acts through the (A) Centroid of the volume of fluid vertically above the body (B) Centre of the volume of floating body (C) Center of gravity of any submerged body (D) Centroid of the displaced volume of fluid

Last Answer : Answer: Option D

A rocket is fired vertically from the ground with a resultant vertical acceleration of 10 m/sec the fuel is finished in one minute and it continues to move up. The maximum height reached will be a.2 km b.20 km c.36 km d.10 km e.80 km

Description : A rocket is fired vertically from the ground with a resultant vertical acceleration of 10 m/sec the fuel is finished in one minute and it continues to move up. The maximum height reached will be a.2 km b.20 km c.36 km d.10 km e.80 km

Last Answer : a. 2 km

Pick up the correct statement from the following: (A) For the same feature, the photograph taken from the satellite vertically above the aircraft, the height displacement is lesser than the aerial photograph (B) The scale of the aerial photograph depends upon the scale of the topography (C) The feature at the principal point has no height displacement (D) All of the above

Description : Pick up the correct statement from the following: (A) For the same feature, the photograph taken from the satellite vertically above the aircraft, the height displacement is lesser than the aerial photograph ... C) The feature at the principal point has no height displacement (D) All of the above

Last Answer : Answer: Option D

Maximum height above rail level of high passenger Platform a. 860 mm b. 900 mm c. 840 mm&* d. 875 mm

Description : Maximum height above rail level of high passenger Platform a. 860 mm b. 900 mm c. 840 mm&* d. 875 mm

Last Answer : c. 840 mm&*

A piece of metal of specific gravity 13.6 is placed in mercury of specific gravity 13.6, what fraction of it volume is under mercury? (A) The metal piece will simply float over the mercury (B) The metal piece will be immersed in mercury by half (C) Whole of the metal piece will be immersed with its top surface just at mercury level (D) Metal piece will sink to the bottom

Description : A piece of metal of specific gravity 13.6 is placed in mercury of specific gravity 13.6, what fraction of it volume is under mercury? (A) The metal piece will simply float over the mercury (B ... will be immersed with its top surface just at mercury level (D) Metal piece will sink to the bottom

Last Answer : Answer: Option C

The top height of a route marker above crown level is (A) 1.50 m (B) 1.75 m (C) 2.00 m (D) 2.25 m

Description : The top height of a route marker above crown level is (A) 1.50 m (B) 1.75 m (C) 2.00 m (D) 2.25 m

Last Answer : Answer: Option D

A stone of wight 100 kg is thrown vertically upwards by a man of height y = 1.8 m with an initial velocity of 20 m/sec. The maximum height to which it will rise would be a.22.2 m b.26 m c.15.1 m d.20.2 m e.10 m

Description : A stone of wight 100 kg is thrown vertically upwards by a man of height y = 1.8 m with an initial velocity of 20 m/sec. The maximum height to which it will rise would be a.22.2 m b.26 m c.15.1 m d.20.2 m e.10 m

Last Answer : a. 22.2 m

The chord of a curve less than peg interval, is known as (A) Small chord (B) Sub-chord (C) Normal chord (D) Short chord

Description : The chord of a curve less than peg interval, is known as (A) Small chord (B) Sub-chord (C) Normal chord (D) Short chord

Last Answer : (B) Sub-chord

A portion of an embankment having a uniform up-gradient 1 in 500 is circular with radius 1000 m of the centre line. It subtends 180° at the centre. If the height of the bank is 1 m at the lower end, and side slopes 2:1, the earth work involved. (A) 26,000 m3 (B) 26,500 m3 (C) 27,000 m3 (D) 27,500 m

Description : A portion of an embankment having a uniform up-gradient 1 in 500 is circular with radius 1000 m of the centre line. It subtends 180° at the centre. If the height of the bank is 1 m at the lower end, and side slopes 2 ... earth work involved. (A) 26,000 m3 (B) 26,500 m3 (C) 27,000 m3 (D) 27,500 m

Last Answer : (D) 27,500 m3

If +0.8% grade meets -0.7% grade and the rate of change of grade for 30 m distance is 0.05, the length of the vertical curve will be (A) 600 m (B) 700 m (C) 800 m (D) 900 m

Description : If +0.8% grade meets -0.7% grade and the rate of change of grade for 30 m distance is 0.05, the  length of the vertical curve will be  (A) 600 m  (B) 700 m  (C) 800 m  (D) 900 m

Last Answer : (D) 900 m

How many inches is 0.770?

Description : How many inches is 0.770?

Last Answer : Need answer

Which of the instruments is not used in Preliminary survey. (a) Theodelite (b) Tacheometer (c) Dumpy level (d) Plane table (e) None of them*

Description : Which of the instruments is not used in Preliminary survey. (a) Theodelite (b) Tacheometer (c) Dumpy level (d) Plane table (e) None of them*

Last Answer : (e) None of them*

Which of the instruments is not used in Reconnaissance survey. (a) Prismatic compass (b) Dumpy level * (c) Aneroid Barometer (d) Pedometer

Description : Which of the instruments is not used in Reconnaissance survey. (a) Prismatic compass (b) Dumpy level * (c) Aneroid Barometer (d) Pedometer

Last Answer : (b) Dumpy level *

State the adjustment of dumpy level on field.

Description : State the adjustment of dumpy level on field.

Last Answer : Adjustment of dumpy level on field: I. Setting up the level. i. The level fixed on tripod. ii. The legs of tripod stand are well spread so that the level will remain stable on tripod. ... screw till the image is distinct and clear. The cross hair on the diaphragm should also be seen clearly.

Explain temporary adjustment of dumpy level.

Description : Explain temporary adjustment of dumpy level. 

Last Answer : Temporary adjustment of dumpy level: I. Setting up the level. i. The level fixed on tripod. ii. The legs of tripod stand are well spread so that the level will remain stable on tripod. ... screw till the image is distinct and clear. The cross hair on the diaphragm should also be seen clearly.

State the fundamental axes and mention their relationship for a dumpy level.

Description : State the fundamental axes and mention their relationship for a dumpy level.

Last Answer : Fundamental axis of dumpy level are as follows; i) The vertical axis ii) The axis of bubble tube iii) The line of collimation iv) The axis of the telescope Relationship between ... iii) Axis of telescope and line of collimation should coincide when dumpy level is correctly leveled.

State fundamental lines and their relationships with each other of dumpy level.

Description : State fundamental lines and their relationships with each other of dumpy level.

Last Answer : Fundamental axes of dumpy level : i) The vertical axis ii) The axis of bubble tube iii) The line of collimation iv) The axis of the telescope Relations of Fundamental axes : i) The ... to the axis of the bubble tube. iii) Axis of telescope and line of collimation should coincide.

State fundamental axis of dumpy level and give their relationship

Description : State fundamental axis of dumpy level and give their relationship 

Last Answer : Fundamental axes of dumpy level : i) The vertical axis ii) The axis of bubble tube iii) The line of collimation iv) The axis of the telescope Relations of Fundamental axes : i) The ... parallel to the axis of the bubble tube. iii) Axis of telescope and line of collimation should coincide. 

State and explain temporary adjustments of dumpy level.

Description : State and explain temporary adjustments of dumpy level.

Last Answer : 1. Setting up the level. a. The level fixed on tripod. b. The legs of tripod stand are well spread so that the level will remain stable on tripod. c. Bring all the three foot screws ... screw till the image is distinct and clear. The cross hair on the diaphragm should also be seen clearly.