A dumpy level was set up at mid-point between pegs A and B, 80 m apart and the staff readings were 1.32 and 1.56. When the level was set up at a point 10 m from A on BA produced, the staff readings obtained at A and B were 1.11 and 1.39. The correct staff reading from this set up at S should be (A) 1.435 (B) 1.345 (C) 1.425 (D) None of these

A dumpy level was set up at mid-point between pegs A and B, 80 m apart and the staff readings
were 1.32 and 1.56. When the level was set up at a point 10 m from A on BA produced, the staff
readings obtained at A and B were 1.11 and 1.39. The correct staff reading from this set up
at S should be
(A) 1.435
(B) 1.345
(C) 1.425
(D) None of these
by

1 Answer

Answer :

(B) 1.345
by

Related questions

A dumpy level was set up at the midpoint between two pegs A and B, 50 m apart and the staff readings at and were 1.22 and 1.06. With the level set up at , the readings at and were 1.55 and 1.37. The collimation error per 100 m length of sight is (A) 0.02 m inclined upwards (B) 0.04 m inclined downwards (C) 0.04 m inclined upward (D) None of these

Description : A dumpy level was set up at the midpoint between two pegs A and B, 50 m apart and the staff  readings at and were 1.22 and 1.06. With the level set up at , the readings at  and were 1.55 and ... upwards  (B) 0.04 m inclined downwards  (C) 0.04 m inclined upward  (D) None of these

Last Answer : (B) 0.04 m inclined downwards 

Which one of the following statements is not correc t? (a) Parallax error is eliminated when there is no change in the staff reading when eye is moved up and down (b) The objective lens is to be focused towards a white or bright background for clear visibility of cross-hairs (c) Temporary adjustments of the dumpy level are to be performed at every set up (d) The eyepiece need not be adjusted after the first set up when the same surveyor is taking readings

Description : Which one of the following statements is not correc t? (a) Parallax error is eliminated when there is no change in the staff reading when eye is moved up and down (b) The objective lens is ... (d) The eyepiece need not be adjusted after the first set up when the same surveyor is taking readings

Last Answer : (b) The objective lens is to be focused towards a white or bright background for clear visibility of cross-hairs

Staff readings on pegs x and y from X station are 1.755 m and 2.850 m, and from station Y on staff head at Y and X are 0.655 m and 1.560 m. If reduced level of X is 105.5 m, the reduced level of Y is (A) 104.0 m (B) 104.5 m (C) 105.0 m (D) 105.5 m

Description : Staff readings on pegs x and y from X station are 1.755 m and 2.850 m, and from station Y on staff head at Y and X are 0.655 m and 1.560 m. If reduced level of X is 105.5 m, the reduced level of Y is (A) 104.0 m (B) 104.5 m (C) 105.0 m (D) 105.5 m

Last Answer : (B) 104.5 m

The back staff reading on a B.M. of R.L. 500.000 m is 2.685 m. If foresight reading on a point is 1.345 m, the reduced level of the point, is (A) 502.685 m (B) 501.345 m (C) 501.340 m (D) 504.030 m

Description : The back staff reading on a B.M. of R.L. 500.000 m is 2.685 m. If foresight reading on a point is 1.345 m, the reduced level of the point, is (A) 502.685 m (B) 501.345 m (C) 501.340 m (D) 504.030 m

Last Answer : (C) 501.340 m

The staff reading at a distance of 80 m from a level with the bubble at its centre is 1.31 m. When the bubble is moved by 5 divisions out of the centre, the reading is 1.39 m. The angular value of the one division of the bubble, is (A) 28.8 sec (B) 41.25 sec (C) 14.52 sec (D) 25.05

Description : The staff reading at a distance of 80 m from a level with the bubble at its centre is 1.31 m. When the bubble is moved by 5 divisions out of the centre, the reading is 1.39 m. The angular value of the one division of the bubble, is (A) 28.8 sec (B) 41.25 sec (C) 14.52 sec (D) 25.05

Last Answer : (B) 41.25 sec

A dumpy level is set up with its eye-piece vertically over a peg . The height from the top of peg to the centre of the eye-piece is 1.540 m and the reading on peg is 0.705 m. The level is then setup over . The height of the eye-piece above peg is 1.490 m and a reading on is 2.195 m. The difference in level between and is (A) 2.900 m (B) 3.030 m (C) 0.770 m (D) 0.785 m

Description : A dumpy level is set up with its eye-piece vertically over a peg . The height from the top of peg to the centre of the eye-piece is 1.540 m and the reading on peg is 0.705 m. The level is then setup over . The height ... in level between and is (A) 2.900 m (B) 3.030 m (C) 0.770 m (D) 0.785 m

Last Answer : (C) 0.770 m

The difference of level between a point below the plane of sight and one above, is the sum of two staff readings and an error would be produced equal to (A) The distance between the zero of gradient and the foot of the staff (B) Twice the distance between the zero of graduation and the foot of the staff (C) Thrice the distance between the zero of graduation and the foot of the staff (D) None of the above

Description : The difference of level between a point below the plane of sight and one above, is the sum of two staff readings and an error would be produced equal to (A) The distance between the zero of ... Thrice the distance between the zero of graduation and the foot of the staff (D) None of the above

Last Answer : (B) Twice the distance between the zero of graduation and the foot of the staff

Dumpy level is most suitable when (A) The instrument is to be shifted frequently (B) Fly levelling is being done over long distance (C) Many readings are to be taken from a single setting of the instrument (D) All of the above

Description : Dumpy level is most suitable when (A) The instrument is to be shifted frequently (B) Fly levelling is being done over long distance (C) Many readings are to be taken from a single setting of the instrument (D) All of the above

Last Answer : (C) Many readings are to be taken from a single setting of the instrument

State the important points kept in mind while recording the staff readings in level pages with respect first reading, intermediate reading, last reading, change point, carry forward from one page to next page-Remark

Description : State the important points kept in mind while recording the staff readings in level pages with respect first reading, intermediate reading, last reading, change point, carry forward from one page to next page-Remark

Last Answer : 1) First reading is on bench mark point and should be noted in back sight(BS) column 2) Intermediate reading (IS) should be taken on the points between first and last station. 3) Last reading ... column of next page 6) Remark column should have denote First and Last RL along with change points.

Dumpy level is most suitable when (a) The instrument is to be shifted frequently (b) Fly leveling is being done over long distance (c) Many readings are to be taken from a single setting of the instrument* (d) All of the above

Description : Dumpy level is most suitable when (a) The instrument is to be shifted frequently (b) Fly leveling is being done over long distance (c) Many readings are to be taken from a single setting of the instrument* (d) All of the above

Last Answer : (c) Many readings are to be taken from a single setting of the instrument*

Pick up the correct statement from the following: (A) The lines of sight while observing back sight and fore sight lie in the same horizontal plane (B) The staff readings are measurements made vertically downwards from a horizontal plane (C) The horizontal plane with reference to which staff readings are taken, coincides with the level surface through the telescope axis (D) All the above

Description : Pick up the correct statement from the following: (A) The lines of sight while observing back sight and fore sight lie in the same horizontal plane (B) The staff readings are measurements made ... readings are taken, coincides with the level surface through the telescope axis (D) All the above

Last Answer : (D) All the above

To set out a parallel from a given inaccessible point to a given line AB, the following observations are made: Distance AB and angle PAM = a and angle PBA = b are measured where M is a point on the line BA produced. The perpendicular to the desired parallel line from A and B are: (A) AB/(cot b - cot a) (B) AB/(cos b - cos a) (C) AB/(cot a - cot b) (D) AB/(cot a - cos b)

Description : To set out a parallel from a given inaccessible point to a given line AB, the following observations are made: Distance AB and angle PAM = a and angle PBA = b are measured where M is a point on the line BA produced. The ... cos b - cos a) (C) AB/(cot a - cot b) (D) AB/(cot a - cos b)

Last Answer : (A) AB/(cot b - cot a)

A level when set up 25 m from peg A and 50 m from peg B reads 2.847 on a staff held on A and 3.462 on a staff held on B, keeping bubble at its centre while reading. If the reduced levels of A and B are 283.665 m and 284.295 m respectively, the collimation error per 100 m is (A) 0.015 m (B) 0.030 m (C) 0.045 m (D) 0.060 m

Description : A level when set up 25 m from peg A and 50 m from peg B reads 2.847 on a staff held on A and 3.462 on a staff held on B, keeping bubble at its centre while reading. If the reduced levels of A and B are 283.665 m ... collimation error per 100 m is (A) 0.015 m (B) 0.030 m (C) 0.045 m (D) 0.060 m

Last Answer : (D) 0.060 m

You are measuring noise in a voice channel at 7 dB test point level. The meter reads -56 dBm (FIA weighted). What is the reading in dBrnc? A. 20 B. 32 C. 35 D. 25

Description : You are measuring noise in a voice channel at 7 dB test point level. The meter reads -56 dBm (FIA weighted). What is the reading in dBrnc? A. 20 B. 32 C. 35 D. 25

Last Answer : C. 35

Pick up the correct statement from the following: (A) An observation or the resulting reading with the level on a levelling staff is called sight (B) A back sight is the first sight taken after setting up the instrument in any position (C) The first sight on each change point is a fore sight (D) All the above

Description : Pick up the correct statement from the following: (A) An observation or the resulting reading with the level on a levelling staff is called sight (B) A back sight is the first sight taken after setting up ... position (C) The first sight on each change point is a fore sight (D) All the above

Last Answer : (D) All the above

State the uses of following instruments in survey: i)Cross staff ii) Chain iii) Pegs iv) Arrows

Description : State the uses of following instruments in survey: i)Cross staff ii) Chain iii) Pegs iv) Arrows

Last Answer : i) Cross-Staff: To set up perpendicular or right angle to given chain line OR to find foot of perpendicular from given object to a chain line. ii) Chain: Chains are used for measuring distances. iii) ... on survey lines. iv) Arrows : They are used to mark the end of each chain during chaining. 

Write the uses of following survey instruments i) Ranging Rod ii) Pegs iii) Cross-staff iv) Plumb bob

Description : Write the uses of following survey instruments i) Ranging Rod ii) Pegs iii) Cross-staff iv) Plumb bob

Last Answer : i) Ranging Rod : Ranging rod are used for ranging. ii) Pegs : Pegs are used for marking the positions of stations or terminals points of survey lines. iii) Cross-staff : It is used ... It is also used for accurate centering of the surveying instruments like theodolite, compass, plane table etc. 

The reduced level of a floor is 99.995 m, the staff reading on the floor is 1.505 m. If the inverted staff reading against the roof is 1.795 m, the floor level below the slab, is (A) 3.290 m (B) 3.300 m (C) 3.275 m (D) 2.790 m

Description : The reduced level of a floor is 99.995 m, the staff reading on the floor is 1.505 m. If the inverted staff reading against the roof is 1.795 m, the floor level below the slab, is (A) 3.290 m (B) 3.300 m (C) 3.275 m (D) 2.790 m

Last Answer : (B) 3.300 m

State the important points kept in mind while recording the readings in level pages with respect first reading, intermediate readings, last reading, and change point, carry forward from one page to next page - Remarks.

Description : State the important points kept in mind while recording the readings in level pages with respect first reading, intermediate readings, last reading, and change point, carry forward from one page to next page - Remarks. 

Last Answer : The following points should be kept in mind while recording the reading in level pages. 1. The first reading should be always noted as back sight (B.S.) 2. All the intermediate readings should ... horizontal line represents only one station. 8. Readings of each station should be in one line only.

Which one of the following statements is correct? (A) When the axes of rotation of the graduated circle and the verniers are not coincident, the instrument possesses eccentricity (B) The mean of the readings of the two verniers gives correct reading free from the eccentricity (C) One Vernier may be used if the readings of two verniers differ by a constant (D) All the above

Description : Which one of the following statements is correct? (A) When the axes of rotation of the graduated circle and the verniers are not coincident, the instrument possesses eccentricity (B) The mean of the ... Vernier may be used if the readings of two verniers differ by a constant (D) All the above

Last Answer : (D) All the above

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Description : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Last Answer : 22

Two cogged wheels of which one has 32 cogs and other 54 cogs, work into each other. If the latter turns 80 times in three quarters of a minute, how often does the other turn in 8 seconds? A) 48 B) 24 C) 38 D) 39 E) None of these

Description : Two cogged wheels of which one has 32 cogs and other 54 cogs, work into each other. If the latter turns 80 times in three quarters of a minute, how often does the other turn in 8 seconds? A) 48 B) 24 C) 38 D) 39 E) None of these

Last Answer : Answer: B  Number of turns required= 80 × 54/32 × 8/45 = 24 24 times

A steel rod of sectional area 250 sq. mm connects two parallel walls 5 m apart. The nuts at the ends were tightened when the rod was heated to 100°C. If steel = 0.000012/C°, Esteel = 0.2 MN/mm2 , the tensile force developed at a temperature of 50°C, is (A) 80 N/mm2 (B) 100 N/mm2 (C) 120 N/mm2 (D) 150 N/mm2 Answer: Option

Description : A steel rod of sectional area 250 sq. mm connects two parallel walls 5 m apart. The nuts at the  ends were tightened when the rod was heated to 100°C. If steel = 0.000012/C°, Esteel = 0.2  MN/mm2 , the ... N/mm2 (B) 100 N/mm2 (C) 120 N/mm2 (D) 150 N/mm2 Answer: Option 

Last Answer : (C) 120 N/mm

ABCD is a trapezium in which AB || DC and AD = BC. If P, Q, R and S be respectively the mid-points of BA, BD, CD and CA, then PQRS is a -Maths 9th

Description : ABCD is a trapezium in which AB || DC and AD = BC. If P, Q, R and S be respectively the mid-points of BA, BD, CD and CA, then PQRS is a -Maths 9th

Last Answer : Here is your First of all we will draw a quadrilateral ABCD with AD = BC and join AC, BD, P,Q,R,S are the mid points of AB, AC, CD and BD respectively. In the triangle ABC, P and Q are mid points of AB and AC respectively. All sides are equal so PQRS is a Rhombus.

The maximum comfortable retardation applied to moving vehicles, is (A) 3.42 m/sec2 (B) 4.42 m/sec2 (C) 5.56 m/sec2 (D) 7.80 m/sec2

Description : The maximum comfortable retardation applied to moving vehicles, is (A) 3.42 m/sec2 (B) 4.42 m/sec2 (C) 5.56 m/sec2 (D) 7.80 m/sec2

Last Answer : Answer: Option A

What is the hcf of 32 56 and 80?

Description : What is the hcf of 32 56 and 80?

Last Answer : The GCF is 8.

R.L. of floor at a building is 74.4 m, staff reading on the floor is 1.625 and staff reading when it is held inverted with bottom touching the ceiling of a hall is 2.870; then the height of the ceiling above the floor is (a) 3.593 m (b) 3.953 m (c) 4.495 m (d) 4. 594 m

Description : R.L. of floor at a building is 74.4 m, staff reading on the floor is 1.625 and staff reading when it is held inverted with bottom touching the ceiling of a hall is 2.870; then the height of the ceiling above the floor is (a) 3.593 m (b) 3.953 m (c) 4.495 m (d) 4. 594 m

Last Answer : (c) 4.495 m

To orient a plane table at a point roughly south of the mid-point of two inaccessible conical hill stations and in the plains, a point is selected in line with AB and table is oriented at by bringing ab in line with AB. A ray is then drawn towards and at the table is oriented by back ray method. The orientation so obtained, is (A) Unique and correct (B) Incorrect (C) Manifold and correct (D) Not reliable

Description : To orient a plane table at a point roughly south of the mid-point of two inaccessible conical hill stations and in the plains, a point is selected in line with AB and table is oriented at by bringing ab ... , is (A) Unique and correct (B) Incorrect (C) Manifold and correct (D) Not reliable

Last Answer : (C) Manifold and correct

vIf the price of Mango is Rs. 130 per kg, Apple is Rs. 140 per kg and Orange is Rs. 80 per kg, then what is the ratio of their cost at vendor A? 1) 11 : 14 : 16 2) 39 : 28: 20 3) 39 : 28 : 21 4) 15 : 14 : 11 5) 39 : 26 : 20

Description : If the price of Mango is Rs. 130 per kg, Apple is Rs. 140 per kg and Orange is Rs. 80 per kg, then what is the ratio of their cost at vendor A? 1) 11 : 14 : 16 2) 39 : 28: 20 3) 39 : 28 : 21 4) 15 : 14 : 11 5) 39 : 26 : 20

Last Answer : 2) 39 : 28: 20

An investor invested Rs. 5 lakhs in Company Q in 1996. After one year, the entire amount along with the interest was transferred as investment to Company P in 1997 for one year. What amount will be received from Company P, by the investor? A. Rs. 5, 94,550 B. Rs. 5, 80,425 C. Rs. 5, 77,800 D. Rs. 5, 77,500 E. None of these

Description : An investor invested Rs. 5 lakhs in Company Q in 1996. After one year, the entire amount along with the interest was transferred as investment to Company P in 1997 for one year. What amount will be received from Company P, by ... . 5, 80,425 C. Rs. 5, 77,800 D. Rs. 5, 77,500 E. None of these

Last Answer : B. Rs. 5, 80,425

In optical reading instruments (A) The vertical circle is usually continuous from 0° to 359° (B) The readings increase when the telescope is elevated in the face left position (C) The readings decrease when the telescope is elevated in the face right position (D) All the above

Description : In optical reading instruments (A) The vertical circle is usually continuous from 0° to 359° (B) The readings increase when the telescope is elevated in the face left position (C) The readings decrease when the telescope is elevated in the face right position (D) All the above

Last Answer : (D) All the above

In case of levelling, backsight is (a) A fixed point of known elevation (b) The last staff reading taken before shifting the instrument (c) The first staff reading taken after setting the instrument (d) Any staff reading taken on a point of unknown elevation

Description : In case of levelling, backsight is (a) A fixed point of known elevation (b) The last staff reading taken before shifting the instrument (c) The first staff reading taken after setting the instrument (d) Any staff reading taken on a point of unknown elevation

Last Answer : (c) The first staff reading taken after setting the instrument

The reaction `._(92)U^(235) + ._(0)n^(1) rarr ._(56)Ba^(140) + ._(36)Kr^(93) + 3 ._(0)n^(1)` represents a)Artificial radioactivity b)Nuclear fission c

Description : The reaction `._(92)U^(235) + ._(0)n^(1) rarr ._(56)Ba^(140) + ._(36)Kr^(93) + 3 ._(0)n^(1)` represents a)Artificial radioactivity b)Nuclear fission c

Last Answer : The reaction `._(92)U^(235) + ._(0)n^(1) rarr ._(56)Ba^(140) + ._(36)Kr^( ... radioactivity B. nuclear fission C. nuclear fussion D. none of the above

The electrician reports to you that he has obtained low (but above 1 megohm) megger readings on the windings of a deck winch motor. Upon checking the records of that motor, you find the readings have consistently been at that level for the last six yea A. motor be replaced B. windings be dried C. windings be cleaned D. readings are acceptable

Description : The electrician reports to you that he has obtained low (but above 1 megohm) megger readings on the windings of a deck winch motor. Upon checking the records of that motor, you find the readings have ... yea A. motor be replaced B. windings be dried C. windings be cleaned D. readings are acceptable

Last Answer : Answer: D

The average mean velocity of a stream having depth h, may be obtained by taking the average of the readings of a current meter at a depth of (A) 0.1 h and 0.9 h (B) 0.2 h and 0.8 h (C) 0.3 h and 0.7 h (D) 0.4 h and 0.6 h

Description : The average mean velocity of a stream having depth h, may be obtained by taking the average of the readings of a current meter at a depth of (A) 0.1 h and 0.9 h (B) 0.2 h and 0.8 h (C) 0.3 h and 0.7 h (D) 0.4 h and 0.6 h

Last Answer : Answer: Option B

Find the pressure due to a column of mercury 74.0 cm high.  a. 91.80 x 10^3 N/m^2  b. 73.56 x 10^2 N/m^2  c. 9.86 x 10^4 N/m^2  d. 87.2 x 10^4 N/m^2

Description : Find the pressure due to a column of mercury 74.0 cm high.  a. 91.80 x 10^3 N/m^2  b. 73.56 x 10^2 N/m^2  c. 9.86 x 10^4 N/m^2  d. 87.2 x 10^4 N/m^2

Last Answer : 9.86 x 10^4 N/m^2

A three hinged arch is loaded with an isolated load 1000 kg at a horizontal distance of 2.5 m from the crown, 1 m above the level of hinges at the supports 10 metres apart. The horizontal thrust is (A) 1250 kg (B) 125 kg (C) 750 kg (D) 2500 kg

Description : A three hinged arch is loaded with an isolated load 1000 kg at a horizontal distance of 2.5 m from the crown, 1 m above the level of hinges at the supports 10 metres apart. The horizontal thrust is (A) 1250 kg (B) 125 kg (C) 750 kg (D) 2500 kg

Last Answer : (A) 1250 kg

During last phase of the reconnaissance, details of the grade line is recorded on 2 metre poles to indicate (A) Direction of the proposed alignment (B) Distance between the previous and forward pegs (C) Relative elevations of pegs (D) All the above

Description : During last phase of the reconnaissance, details of the grade line is recorded on 2 metre poles to indicate (A) Direction of the proposed alignment (B) Distance between the previous and forward pegs (C) Relative elevations of pegs (D) All the above

Last Answer : Answer: Option D

On Indian Railways standard length of rails for Meter Gauge track, is A. 33 ft (10.06 m) B. 36 ft (10.97 m) C. 39 ft (11.89 m) D. 42 ft (12.8 m)

Description : On Indian Railways standard length of rails for Meter Gauge track, is A. 33 ft (10.06 m) B. 36 ft (10.97 m) C. 39 ft (11.89 m) D. 42 ft (12.8 m)

Last Answer : C [39 ft (11.89 m)]

On Indian Railways standard length of rails for Broad Gauge track, is A. 33 ft (10.06 m) B. 36 ft (10.97 m) C. 39 ft (11.89 m) D. 42 ft (12.8 m)

Description : On Indian Railways standard length of rails for Broad Gauge track, is A. 33 ft (10.06 m) B. 36 ft (10.97 m) C. 39 ft (11.89 m) D. 42 ft (12.8 m)

Last Answer : D [42 ft (12.8 m)] Explanation: Indian Railways is divided into 18 zones. Recently added South Coast Railway zones in Indian Railway (2019).

The dimensions of a 35 litre forma for measuring aggregates by volume, are: (A) length 30 cm, breadth 25 cm, height 30 cm (B) length 39 cm, breadth 25 cm, height 32 cm (C) length 27 cm, breadth 27 cm, height 48 cm (D) length 220 cm, breadth 25 cm, height 40 cm

Description : The dimensions of a 35 litre forma for measuring aggregates by volume, are: (A) length 30 cm, breadth 25 cm, height 30 cm (B) length 39 cm, breadth 25 cm, height 32 cm (C) length 27 cm, breadth 27 cm, height 48 cm (D) length 220 cm, breadth 25 cm, height 40 cm

Last Answer : Answer: Option C

If permissible working stresses in steel and concrete are respectively 1400 kg/cm2 and 80 kg/cm2 and modular ratio is 18, in a beam reinforced in tension side and of width 30 cm and having effective depth 46 cm, the lever arms of the section, is (A) 37 cm (B) 38 cm (C) 39 cm (D) 40 cm

Description : If permissible working stresses in steel and concrete are respectively 1400 kg/cm2 and 80 kg/cm2 and modular ratio is 18, in a beam reinforced in tension side and of width 30 cm and having effective depth 46 cm, the lever arms of the section, is (A) 37 cm (B) 38 cm (C) 39 cm (D) 40 cm

Last Answer : Answer: Option D

An animal drawn seed drill has k number of furrow openers 180mm apart. If the speed of operation is 2.0kmph, the area covered (ha), in 8-11day is given by: A. 1.85/1000k B. 28.8 x 10-2k C. k/6.56 D. 1.762k

Description : An animal drawn seed drill has k number of furrow openers 180mm apart. If the speed of operation is 2.0kmph, the area covered (ha), in 8-11day is given by: A. 1.85/1000k B. 28.8 x 10-2k C. k/6.56 D. 1.762k

Last Answer : B. 28.8 x 10-2k

An excavator costs Rs. 20,00,000 and has an estimated life of 8 years. It has no salvage value at the end of 8 years. The book value of the excavator at the end of 3 years using general double declining balance method is (A) Rs. 8,43,750 (B) Rs. 8,75,000 (C) Rs. 10,50,000 (D) Rs. 11,56,250

Description : An excavator costs Rs. 20,00,000 and has an estimated life of 8 years. It has no salvage value at the end of 8 years. The book value of the excavator at the end of 3 years using general double declining balance method is (A) Rs. 8,43,750 (B) Rs. 8,75,000 (C) Rs. 10,50,000 (D) Rs. 11,56,250

Last Answer : (A) Rs. 8,43,750

Force per meter on two wires carrying a current of 1 A placed 1 m apart is equal to A. 6.7 × 10-11 N B. 9.0 × 109 N C. 2.0 × 10-7 N D. 3.0 × 10-4 N

Description : Force per meter on two wires carrying a current of 1 A placed 1 m apart is equal to A. 6.7 × 10-11 N B. 9.0 × 109 N C. 2.0 × 10-7 N D. 3.0 × 10-4 N

Last Answer :  2.0 × 10-7 N

Two stations X and Y are 170 km apart on a straight line. One train starts from X at 6 a.m. and travels towards Y at 25 kmph. Another train starts from Y at 8 a.m. and travels towards X at a speed of 35 kmph. At what time will they meet? a) 11. 30 a.m b) 10.30 a.m c) 11 a.m d) 9 a.m e) 10 am

Description : Two stations X and Y are 170 km apart on a straight line. One train starts from X at 6 a.m. and travels towards Y at 25 kmph. Another train starts from Y at 8 a.m. and travels towards X at a speed of 35 kmph. At what time will they meet? a) 11. 30 a.m b) 10.30 a.m c) 11 a.m d) 9 a.m e) 10 am

Last Answer : e Suppose they meet z hours after 6 a.m. Distance covered by X in z hours = 25× z km. Distance covered by Y in (z - 2) hours = 35(z - 2) km. Therefore 25z + 35(z- 2) = 170 60z = 240 x = 4. So, they meet at 10 a.m.

The average age of K and L is 48 years. If M replaced K, the average age would be 40 and if M replaced L, the average would be 44. What are the ages of K,L,M repectively? A) 58, 46, 22 B) 32, 44, 36 C) 52,44,36 D) 56, 22,38

Description :  The average age of K and L is 48 years. If M replaced K, the average age would be 40 and if M replaced L, the average would be 44. What are the ages of K,L,M repectively? A) 58, 46, 22 B) 32, 44, 36 C) 52,44,36 D) 56, 22,38

Last Answer : Answer: C)  Total age of K& L = 48*2 = 96 yrs----->1 Total age of L& M = 40*2 = 80yrs----->2 Total age of K& M = 44*2 = 88 yrs----->3 from 1, 2, 3 K+L+M =132---->4 from 1 & 4, M= 36 from 2 & 4, K=52 from 3 & 4, L=44 Hence the required answer is 52,44,36 

The pressure at a point 4 m below the free surface of water is (A) 19.24 kPa (B) 29.24 kPa (C) 39.24 kPa (D) 49.24 kPa

Description : The pressure at a point 4 m below the free surface of water is (A) 19.24 kPa (B) 29.24 kPa (C) 39.24 kPa (D) 49.24 kPa

Last Answer : Answer: Option C

Which of the instruments is not used in Preliminary survey. (a) Theodelite (b) Tacheometer (c) Dumpy level (d) Plane table (e) None of them*

Description : Which of the instruments is not used in Preliminary survey. (a) Theodelite (b) Tacheometer (c) Dumpy level (d) Plane table (e) None of them*

Last Answer : (e) None of them*

Which of the instruments is not used in Reconnaissance survey. (a) Prismatic compass (b) Dumpy level * (c) Aneroid Barometer (d) Pedometer

Description : Which of the instruments is not used in Reconnaissance survey. (a) Prismatic compass (b) Dumpy level * (c) Aneroid Barometer (d) Pedometer

Last Answer : (b) Dumpy level *