An imaginary line lying throughout the surface of ground and preserving a constant inclination to the horizontal is known as (A) Contour line (B) Horizontal equivalent (C) Contour interval (D) Contour gradient

An imaginary line lying throughout the surface of ground and preserving a constant inclination to
the horizontal is known as
(A) Contour line
(B) Horizontal equivalent
(C) Contour interval
(D) Contour gradient
by

1 Answer

Answer :

(D) Contour gradient
by

Related questions

An imaginary line lying throughout on the surface of the earth and preserving a constant inclination to the horizontal, is called (A) Contour line (B) Contour gradient (C) Level line (D) Line of gentle scope

Description : An imaginary line lying throughout on the surface of the earth and preserving a constant inclination to the horizontal, is called (A) Contour line (B) Contour gradient (C) Level line (D) Line of gentle scope

Last Answer : (B) Contour gradient

The constant vertical distance between two adjacent contours, is called (A) Horizontal interval (B) Horizontal equivalent (C) Vertical equivalent (D) Contour interval

Description : The constant vertical distance between two adjacent contours, is called (A) Horizontal interval (B) Horizontal equivalent (C) Vertical equivalent (D) Contour interval

Last Answer : (D) Contour interval

An imaginary line joining the points of equal elevation on the surface of the earth, represents (A) Contour surface (B) Contour gradient (C) Contour line (D) Level line

Description : An imaginary line joining the points of equal elevation on the surface of the earth, represents (A) Contour surface (B) Contour gradient (C) Contour line (D) Level line

Last Answer : (C) Contour line

From any point on the surface with a given inclination (A) Only one contour gradient is possible (B) Two contour gradients are possible (C) Indefinite contour gradients are possible (D) All of the above

Description : From any point on the surface with a given inclination  (A) Only one contour gradient is possible  (B) Two contour gradients are possible  (C) Indefinite contour gradients are possible  (D) All of the above

Last Answer : (C) Indefinite contour gradients are possible 

Differentiate between contour interval and horizontal equivalent.

Description : Differentiate between contour interval and horizontal equivalent.

Last Answer : Contour Interval - The vertical distance between two successive contours or contour lines, is known as Contour Interval. Horizontal Equivalent - The horizontal distance between two successive contours or contour lines, is known as Horizontal Equivalent.

Contour interval is (A) The vertical distance between two consecutive contours (B) The horizontal distance between two consecutive contours (C) The vertical distance between two points on same contour (D) The horizontal distance between two points on same contour

Description : Contour interval is (A) The vertical distance between two consecutive contours (B) The horizontal distance between two consecutive contours (C) The vertical distance between two points on same contour (D) The horizontal distance between two points on same contour

Last Answer : (A) The vertical distance between two consecutive contours

In direct method of contouring, the process of locating or identifying points lying on a contour is called (A) Ranging (B) Centring (C) Horizontal control (D) Vertical control

Description : In direct method of contouring, the process of locating or identifying points lying on a contour is called (A) Ranging (B) Centring (C) Horizontal control (D) Vertical control

Last Answer : (D) Vertical control

In the cross-section method of indirect contouring, the spacing of cross-sections depends upon (i) Contour interval (ii) Scale of plan (iii) Characteristics of ground The correct answer is (A) Only (i) (B) (i) and (ii) (C) (ii) and (iii) (D) (i), (ii) and (iii)

Description : In the cross-section method of indirect contouring, the spacing of cross-sections depends upon (i) Contour interval (ii) Scale of plan (iii) Characteristics of ground The correct answer is (A) Only (i) (B) (i) and (ii) (C) (ii) and (iii) (D) (i), (ii) and (iii)

Last Answer : (D) (i), (ii) and (iii)

Contour interval is (A) Inversely proportional to the scale of the map (B) Directly proportional to the flatness of ground (C) Larger for accurate works (D) Larger if the time available is more

Description : Contour interval is (A) Inversely proportional to the scale of the map (B) Directly proportional to the flatness of ground (C) Larger for accurate works (D) Larger if the time available is more

Last Answer : (A) Inversely proportional to the scale of the map

Select the correct statement. A) Contour interval on any map is kept constant. (B) Direct method of contouring is cheaper than indirect method. (C) Intervisibility of points on a contour map cannot be ascertained. (D) Slope of a hill cannot be determined with the help of contours.

Description : Select the correct statement. . A) Contour interval on any map is kept constant. (B) Direct method of contouring is cheaper than indirect method. (C) Intervisibility of points on a contour map cannot be ascertained. (D) Slope of a hill cannot be determined with the help of contours.

Last Answer : (A) Contour interval on any map is kept constant.

Contour interval on a map sheet denotes (a) Vertical distance of contour lines above the datum plane (b) Vertical distance between two successive contour lines (c) Slope distance between two successive contour lines (d) Horizontal distance between two successive contour lines

Description : Contour interval on a map sheet denotes (a) Vertical distance of contour lines above the datum plane (b) Vertical distance between two successive contour lines (c) Slope distance between two successive contour lines (d) Horizontal distance between two successive contour lines

Last Answer : (b) Vertical distance between two successive contour lines

An open vessel of water is accelerated up an inclined plane. The free water surface will (A) Be horizontal (B) Make an angle in direction of inclination of inclined plane (C) Make an angle in opposite direction to inclination of inclined plane (D) Any one of above is possible

Description : An open vessel of water is accelerated up an inclined plane. The free water surface will (A) Be horizontal (B) Make an angle in direction of inclination of inclined plane (C) Make an angle in opposite direction to inclination of inclined plane (D) Any one of above is possible

Last Answer : Answer: Option C

The boundary of water of a still lake represents (A) Level surface (B) Horizontal surface (C) Contour line (D) A concave surface

Description : The boundary of water of a still lake represents (A) Level surface (B) Horizontal surface (C) Contour line (D) A concave surface

Last Answer : (C) Contour line

The angle which an inclined surface makes with the horizontal when a body placed on it is on the point moving down is known as a.Angle of friction b.Angle of limiting friction c.Angle of inclination d.Angle of repose e.None of the above

Description : The angle which an inclined surface makes with the horizontal when a body placed on it is on the point moving down is known as a.Angle of friction b.Angle of limiting friction c.Angle of inclination d.Angle of repose e.None of the above

Last Answer : d. Angle of repose

Deviation of the actual road gradient from the proposed contour gradient uphill side, involves (A) Embankment on the centre line (B) Excavation on the centre line (C) Earth work on the centre line (D) None of these

Description : Deviation of the actual road gradient from the proposed contour gradient uphill side, involves  (A) Embankment on the centre line  (B) Excavation on the centre line  (C) Earth work on the centre line  (D) None of these

Last Answer : (B) Excavation on the centre line 

The height of formation depends upon the a) Ground contours and the gradient adopted* b) Ground contour only c) Gradient adopted only d) Rainfall intensity over the year

Description : The height of formation depends upon the a) Ground contours and the gradient adopted* b) Ground contour only c) Gradient adopted only d) Rainfall intensity over the year

Last Answer : a) Ground contours and the gradient adopted*

Contour line is the imaginary line joining places of equal : (1) Rainfall (2) Humidity (3) Elevation (4) Temperature

Description : Contour line is the imaginary line joining places of equal : (1) Rainfall (2) Humidity (3) Elevation (4) Temperature

Last Answer : (3) Elevation Explanation: Contour line is a line on a map or chart joining points of equal height (elevation) or depth. Closely spaced contour lines indicate a steeper grade than the more loosely spaced lines.

Contour line is the imaginary line joining places of equal?

Description : Contour line is the imaginary line joining places of equal?

Last Answer : Elevation.

Contour line is the imaginary line joining places of equal : (1) Rainfall (2) Humidity (3) Elevation (4) Temperature

Description : Contour line is the imaginary line joining places of equal : (1) Rainfall (2) Humidity (3) Elevation (4) Temperature

Last Answer : Elevation

A rectangular surface 3' × 4', has the lower 3 edge horizontal and 6' below a free oil surface (sp. gr. 0.8). The surface inclination is 300 with the horizontal. The force on one side of the surface is (where, y = specific weight of water) (A) 39.6y (B) 48y (C) 49.2y (D) 58y

Description : A rectangular surface 3' × 4', has the lower 3 edge horizontal and 6' below a free oil surface (sp. gr. 0.8). The surface inclination is 300 with the horizontal. The force on one side of the surface is (where, y = specific weight of water) (A) 39.6y (B) 48y (C) 49.2y (D) 58y

Last Answer : (B) 48y

The suitable contour interval for a map with scale 1 : 10000 is (A) 2 m (B) 5 m (C) 10 m (D) 20 m

Description : The suitable contour interval for a map with scale 1 : 10000 is (A) 2 m (B) 5 m (C) 10 m (D) 20 m

Last Answer : (A) 2 m

Accuracy of elevation of various points obtained from contour map is limited to (A) ½ of the contour interval (B) ¼ th of the contour interval (C) rd of the contour interval (D) th of the contour interval

Description : Accuracy of elevation of various points obtained from contour map is limited to (A) ½ of the contour interval (B) ¼ th of the contour interval (C) rd of the contour interval (D) th of the contour interval

Last Answer : (A) ½ of the contour interval

Pick up the correct statement from the following: (A) Detailed survey is carried out for a strip of land about 30 m at sharp curves (B) Levels are taken along the trace cut at an interval of 20 m (C) Contour interval is generally adopted at 2 metres vertical interval (D) All the above

Description : Pick up the correct statement from the following: (A) Detailed survey is carried out for a strip of land about 30 m at sharp curves (B) Levels are taken along the trace cut at an interval of 20 m (C) Contour interval is generally adopted at 2 metres vertical interval (D) All the above

Last Answer : Answer: Option D

If a cohesive soil specimen is subjected to a vertical compressive load, the inclination of the cracks to the horizontal is (A) 90° (B) 45° (C) 22.5° (D) 0

Description : If a cohesive soil specimen is subjected to a vertical compressive load, the inclination of the cracks to the horizontal is (A) 90° (B) 45° (C) 22.5° (D) 0

Last Answer : (B) 45°

Cross-staff is used for (A) Setting out right angles (B) Measuring contour gradient (C) Taking levels (D) Measuring distances

Description : Cross-staff is used for  (A) Setting out right angles  (B) Measuring contour gradient  (C) Taking levels  (D) Measuring distances 

Last Answer : (A) Setting out right angles 

Planimeter is used for measuring (A) Volume (B) Area (C) Contour gradient (D) Slope angle

Description : Planimeter is used for measuring (A) Volume (B) Area (C) Contour gradient (D) Slope angle

Last Answer : (B) Area

Location of contour gradient for a high way is best set out from (A) Ridge down the hill (B) Saddle down the hill (C) Bottom to the ridge (D) Bottom to the saddle

Description : Location of contour gradient for a high way is best set out from (A) Ridge down the hill (B) Saddle down the hill (C) Bottom to the ridge (D) Bottom to the saddle

Last Answer : (B) Saddle down the hill

Capacity of a rotary dryer depends on its (A) rpm (B) Inclination with ground surface (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Capacity of a rotary dryer depends on its (A) rpm (B) Inclination with ground surface (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

A counter may be defined as an imaginary line passing through (a) Points on the longitudinal section (b) Points of equal elevation (c) Point of equal local ground slope (d) Points of transverse section surveys

Description : A counter may be defined as an imaginary line passing through (a) Points on the longitudinal section (b) Points of equal elevation (c) Point of equal local ground slope (d) Points of transverse section surveys

Last Answer : (b) Points of equal elevation

Which of the following is an advantage of food processing? A. Availability of seasonal food throughout the year B. Removal of toxins and preserving food for longer C. Adds extra nutrients to some food items D. All of the above

Description : Which of the following is an advantage of food processing? A. Availability of seasonal food throughout the year B. Removal of toxins and preserving food for longer C. Adds extra nutrients to some food items D. All of the above

Last Answer : D. All of the above

If the viscosity of ground water is 1.00, the Slitcher's constant is 400, the effective size of soil particles in aquifer is 0.5 mm and hydraulic gradient is 1 in 80, the velocity of flow is (A) 0.25 m/day (B) 0.50 m/day (C) 1.00 m/day (D) 1.25 m/day

Description : If the viscosity of ground water is 1.00, the Slitcher's constant is 400, the effective size of soil particles in aquifer is 0.5 mm and hydraulic gradient is 1 in 80, the velocity of flow is (A) 0.25 m/day (B) 0.50 m/day (C) 1.00 m/day (D) 1.25 m/day

Last Answer : Answer: Option D

The line of sight is kept as high above ground surface as possible to minimise the error in the observed angles due to (A) Shimmering (B) Horizontal refraction (C) Vertical refraction (D) Both shimmering and horizontal refraction

Description : The line of sight is kept as high above ground surface as possible to minimise the error in the observed angles due to (A) Shimmering (B) Horizontal refraction (C) Vertical refraction (D) Both shimmering and horizontal refraction

Last Answer : (D) Both shimmering and horizontal refraction

The ground surface slopes 1 in 50 along a proposed railway embankment 150 m in length. The height of the embankment at zero chainage is 0.5 m, the width is 11 m and side slopes 2:1. If the falling gradient of the embankment is 1 in 150, the quantity of the earthwork calculated by Prismoidal formula, is (A) 3250 m3 (B) 3225 m3 (C) 3275 m3 (D) 3300 m3

Description : The ground surface slopes 1 in 50 along a proposed railway embankment 150 m in length. The height of the embankment at zero chainage is 0.5 m, the width is 11 m and side slopes 2:1. If the falling gradient ... calculated by Prismoidal formula, is (A) 3250 m3 (B) 3225 m3 (C) 3275 m3 (D) 3300 m3

Last Answer : (B) 3225 m3

lf the poles of system are lying on the imaginary axis in s-plane, then the system will be

Description : lf the poles of system are lying on the imaginary axis in s-plane, then the system will be

Last Answer : lf the poles of system are lying on the imaginary axis in s-plane, then the system will be marginally stable

Pick up the correct statement from the following: (A) The horizontal angle between magnetic meridian and true meridian at a place is called magnetic declination or variance of the compass (B) The imaginary lines which pass through points at which the magnetic declinations are equal at a given time are called isogonic lines (C) The isogonic lines through places at which the declination is zero are termedagonic lines (D) All the above

Description : Pick up the correct statement from the following: (A) The horizontal angle between magnetic meridian and true meridian at a place is called magnetic declination or variance of the compass (B) The ... lines through places at which the declination is zero are termedagonic lines (D) All the above

Last Answer : (D) All the above

What factors might influence a cartographers choice of contour interval?

Description : What factors might influence a cartographers choice of contour interval?

Last Answer : Feel Free to Answer

What would a disadvantage of using a smaller contour interval?

Description : What would a disadvantage of using a smaller contour interval?

Last Answer : What is the answer ?

Define 1) Contour 2) Contour Interval

Description : Define 1) Contour 2) Contour Interval

Last Answer : Contour :- It is an imaginary line on the ground joining points of equal elevation or RLs.  Contour Interval :- The vertical distance between any two consecutive contours is known as a contour interval

Pick up the correct statement from the following: A. Inlets are provided on the road surface at the lowest point for draining rain water B. Inlets are generally provided at an interval of 30 m to 60 m along straight roads C. Inlets having horizontal openings, are called horizontal inlets D. All the above

Description : Pick up the correct statement from the following: A. Inlets are provided on the road surface at the lowest point for draining rain water B. Inlets are generally provided at an interval of ... along straight roads C. Inlets having horizontal openings, are called horizontal inlets D. All the above

Last Answer : ANS: D

The direction of projection for the range of a projectile to be maximum on an inclined plane having angle of inclination 30? to the horizontal, whould be a.45? with horizontal b.30? with vertical c.30? with horizontal d.60? with inclined plane e.45? with inclined plane

Description : The direction of projection for the range of a projectile to be maximum on an inclined plane having angle of inclination 30? to the horizontal, whould be a.45? with horizontal b.30? with vertical c.30? with horizontal d.60? with inclined plane e.45? with inclined plane

Last Answer : b. 30? with vertical

An open tank containing liquid is moving with an acceleration on an inclined plane. The inclination of the free surface of the liquid will be __________ to the acceleration of the tank. (A) Equal to (B) Directly proportional (C) Inversely proportional (D) None of these

Description : An open tank containing liquid is moving with an acceleration on an inclined plane. The inclination of the free surface of the liquid will be __________ to the acceleration of the tank. (A) Equal to (B) Directly proportional (C) Inversely proportional (D) None of these

Last Answer : Answer: Option B

Which of the following are pertinent to the realization of hydrological cycle? 1. Latitudinal difference in solar heating of the Earth’s surface 2. Inclination of the Earth’s axis 3. Uneven distribution of land and water 4. Coriolis effect (a) 1, 2 & 3 only (b) 1, 2 & 4 only (c) 2, 3 & 4 only (d) 1, 2, 3 & 4

Description : Which of the following are pertinent to the realization of hydrological cycle? 1. Latitudinal difference in solar heating of the Earth's surface 2. Inclination of the Earth's axis 3. Uneven distribution of land and water 4. Coriolis effect (a) ... (b) 1, 2 & 4 only (c) 2, 3 & 4 only (d) 1, 2, 3 & 4

Last Answer : (b) 1, 2 & 4 only

Let a, b, c be positive numbers lying in the interval (0, 1], then a/(1+b+ca)+b/(a+c+ab)+c/(1+a+bc) is -Maths 9th

Description : Let a, b, c be positive numbers lying in the interval (0, 1], then a/(1+b+ca)+b/(a+c+ab)+c/(1+a+bc) is -Maths 9th

Last Answer : answer:

What is the purpose of making a record of protrusive relation and what function does it serve after it is made? A. To register the condylar path and to adjust the inclination of the incisal guidance. B. To aid in determining the freeway space and to adjust the inclination of the incisal guidance. C. to register the condylar path and to adjust the condylar guides of the articulator so that they are equivalent to the condylar paths of the patient.

Description : What is the purpose of making a record of protrusive relation and what function does it serve after it is made? A. To register the condylar path and to adjust the inclination of the ... the condylar guides of the articulator so that they are equivalent to the condylar paths of the patient.

Last Answer : C. to register the condylar path and to adjust the condylar guides of the articulator so that they are equivalent to the condylar paths of the patient.

Pick up the correct statement from the following: (A) Box sextant is used for the measurement of horizontal angles (B) Cross staff is used for setting out right angles (C) Gradiometer is used for setting out any required gradient (D) All the above

Description : Pick up the correct statement from the following: (A) Box sextant is used for the measurement of horizontal angles (B) Cross staff is used for setting out right angles (C) Gradiometer is used for setting out any required gradient (D) All the above

Last Answer : (D) All the above

The imaginary line passing through the intersection of cross hairs and the optical centre of the objective, is known as (A) Line of sight (B) Line of collimation (C) Axis of the telescope (D) None of these

Description : The imaginary line passing through the intersection of cross hairs and the optical centre of the objective, is known as (A) Line of sight (B) Line of collimation (C) Axis of the telescope (D) None of these

Last Answer : (B) Line of collimation

The imaginary line drawn in the fluid in such a way that the tangent to any point gives the direction of motion at that point, is known as (A) Path line (B) Stream line (C) Steak line (D) Potential line

Description : The imaginary line drawn in the fluid in such a way that the tangent to any point gives the direction of motion at that point, is known as (A) Path line (B) Stream line (C) Steak line (D) Potential line

Last Answer : Answer: Option B

In active state of plastic equilibrium in a non cohesive soil with horizontal ground surface (A) Major principal stress is horizontal (B) Minor principal stress is vertical (C) Major principal stress is vertical (D) Minor and major principal stresses are equally inclined to horizontal

Description : In active state of plastic equilibrium in a non cohesive soil with horizontal ground surface (A) Major principal stress is horizontal (B) Minor principal stress is vertical (C) Major principal stress is vertical (D) Minor and major principal stresses are equally inclined to horizontal

Last Answer : Answer: Option C

Rankine's theory of active earth pressure assumes (A) Soil mass is homogeneous, dry and cohesionless (B) Ground surface is a plane which may be horizontal or inclined (C) Back of the wall is vertical and smooth (D) All the above

Description : Rankine's theory of active earth pressure assumes (A) Soil mass is homogeneous, dry and cohesionless (B) Ground surface is a plane which may be horizontal or inclined (C) Back of the wall is vertical and smooth (D) All the above

Last Answer : Answer: Option D