Planimeter is used for measuring (A) Volume (B) Area (C) Contour gradient (D) Slope angle

Planimeter is used for measuring
(A) Volume
(B) Area
(C) Contour gradient
(D) Slope angle
by

1 Answer

Answer :

(B) Area
by

Related questions

Cross-staff is used for (A) Setting out right angles (B) Measuring contour gradient (C) Taking levels (D) Measuring distances

Description : Cross-staff is used for  (A) Setting out right angles  (B) Measuring contour gradient  (C) Taking levels  (D) Measuring distances 

Last Answer : (A) Setting out right angles 

The direction of steepest slope on a contour, is (A) Along the contour (B) At an angle of 45° to the contour (C) At right angles to the contour (D) None of these

Description : The direction of steepest slope on a contour, is (A) Along the contour (B) At an angle of 45° to the contour (C) At right angles to the contour (D) None of these

Last Answer : (C) At right angles to the contour

Instrument used for measuring area on maps is called – (1) Planimeter (2) Eidograph (3) Pantograph (4) Opisometer

Description : Instrument used for measuring area on maps is called – (1) Planimeter (2) Eidograph (3) Pantograph (4) Opisometer

Last Answer : (1) Planimeter Explanation: The planimeter is a drafting instrument used to measure the area of a graphically represented planar region. The region being measured may have any irregular shape, ... the planimeter is heading toward obsolescence, but not just yet. They are still being manufactured.

Describe procedure for measuring area using digital planimeter.

Description : Describe procedure for measuring area using digital planimeter.

Last Answer : The procedure of measurement of an area using digital planimeter is as follows: i. Take the area on the plane surface of table and fix it with clips so that while measurement it does not move. ... the end button. vi. The area of given figure is displayed in digital display of digital planimeter. 

Instrument used for measuring area on maps is called (1) Planimeter (2) Eidograph (3) Pantograph(4) Opisometer

Description : Instrument used for measuring area on maps is called (1) Planimeter (2) Eidograph (3) Pantograph (4) Opisometer

Last Answer : Planimeter

A clinometer is used for (A) Measuring angle of slope (B) Correcting line of collimation (C) Setting out right angles (D) Defining natural features

Description : A clinometer is used for (A) Measuring angle of slope (B) Correcting line of collimation (C) Setting out right angles (D) Defining natural features

Last Answer : (A) Measuring angle of slope

From any point on the surface with a given inclination (A) Only one contour gradient is possible (B) Two contour gradients are possible (C) Indefinite contour gradients are possible (D) All of the above

Description : From any point on the surface with a given inclination  (A) Only one contour gradient is possible  (B) Two contour gradients are possible  (C) Indefinite contour gradients are possible  (D) All of the above

Last Answer : (C) Indefinite contour gradients are possible 

Deviation of the actual road gradient from the proposed contour gradient uphill side, involves (A) Embankment on the centre line (B) Excavation on the centre line (C) Earth work on the centre line (D) None of these

Description : Deviation of the actual road gradient from the proposed contour gradient uphill side, involves  (A) Embankment on the centre line  (B) Excavation on the centre line  (C) Earth work on the centre line  (D) None of these

Last Answer : (B) Excavation on the centre line 

An imaginary line lying throughout the surface of ground and preserving a constant inclination to the horizontal is known as (A) Contour line (B) Horizontal equivalent (C) Contour interval (D) Contour gradient

Description : An imaginary line lying throughout the surface of ground and preserving a constant inclination to the horizontal is known as (A) Contour line (B) Horizontal equivalent (C) Contour interval (D) Contour gradient

Last Answer : (D) Contour gradient

An imaginary line joining the points of equal elevation on the surface of the earth, represents (A) Contour surface (B) Contour gradient (C) Contour line (D) Level line

Description : An imaginary line joining the points of equal elevation on the surface of the earth, represents (A) Contour surface (B) Contour gradient (C) Contour line (D) Level line

Last Answer : (C) Contour line

Location of contour gradient for a high way is best set out from (A) Ridge down the hill (B) Saddle down the hill (C) Bottom to the ridge (D) Bottom to the saddle

Description : Location of contour gradient for a high way is best set out from (A) Ridge down the hill (B) Saddle down the hill (C) Bottom to the ridge (D) Bottom to the saddle

Last Answer : (B) Saddle down the hill

An imaginary line lying throughout on the surface of the earth and preserving a constant inclination to the horizontal, is called (A) Contour line (B) Contour gradient (C) Level line (D) Line of gentle scope

Description : An imaginary line lying throughout on the surface of the earth and preserving a constant inclination to the horizontal, is called (A) Contour line (B) Contour gradient (C) Level line (D) Line of gentle scope

Last Answer : (B) Contour gradient

A series of closely spaced contour lines represents a (A) Steep slope (B) Gentle slope (C) Uniform slope (D) Plane surface

Description : A series of closely spaced contour lines represents a (A) Steep slope (B) Gentle slope (C) Uniform slope (D) Plane surface

Last Answer : (A) Steep slope

Pick up the correct statement from the following (A) The contour lines having the same elevation cannot unite and continue as one line (B) A contour can not end abruptly, but must ultimately close itself not necessarily within the limits of map (C) The direction of steepest slope at a point on a contour is at right angles to the contour (D) All the above

Description : Pick up the correct statement from the following (A) The contour lines having the same elevation cannot unite and continue as one line (B) A contour can not end abruptly, but must ultimately close itself not ... slope at a point on a contour is at right angles to the contour (D) All the above

Last Answer : (D) All the above

Select the correct statement. A) Contour interval on any map is kept constant. (B) Direct method of contouring is cheaper than indirect method. (C) Intervisibility of points on a contour map cannot be ascertained. (D) Slope of a hill cannot be determined with the help of contours.

Description : Select the correct statement. . A) Contour interval on any map is kept constant. (B) Direct method of contouring is cheaper than indirect method. (C) Intervisibility of points on a contour map cannot be ascertained. (D) Slope of a hill cannot be determined with the help of contours.

Last Answer : (A) Contour interval on any map is kept constant.

The area of any irregular figure of the plotted map is measured with (A) Pentagraph (B) Sextant (C) Clinometer (D) Planimeter

Description : The area of any irregular figure of the plotted map is measured with (A) Pentagraph (B) Sextant (C) Clinometer (D) Planimeter

Last Answer : (D) Planimeter

The slope correction for a length of 30 m along a gradient of 1 in 20, is (A) 3.75 cm (B) 0.375 cm (C) 37.5 cm (D) 2.75 cm

Description : The slope correction for a length of 30 m along a gradient of 1 in 20, is  (A) 3.75 cm  (B) 0.375 cm  (C) 37.5 cm  (D) 2.75 cm

Last Answer : (A) 3.75 cm 

Keeping the instrument height as 1½ m, length of staff 4 m, the up gradient of the ground 1 in 10, the sight on the up slope must be less than (A) 25 cm (B) 20 m (C) 45 m (D) 10 m

Description : Keeping the instrument height as 1½ m, length of staff 4 m, the up gradient of the ground 1 in 10,  the sight on the up slope must be less than  (A) 25 cm  (B) 20 m  (C) 45 m  (D) 10 m

Last Answer : (C) 45 m 

The seepage exit gradient in a soil is the ratio of A) Total head to the length of seepage (B) Flow line to slope (C) Head upstream to that at downstream (D) Head loss to the length of the seepage

Description : The seepage exit gradient in a soil is the ratio of A) Total head to the length of seepage (B) Flow line to slope (C) Head upstream to that at downstream (D) Head loss to the length of the seepage

Last Answer : Answer: Option D

If the elevations along a road increase, the slope of the road along the longitudinal direction, is known as (A) Gradient (B) Grade (C) Positive grade (D) Negative grade

Description : If the elevations along a road increase, the slope of the road along the longitudinal direction, is known as (A) Gradient (B) Grade (C) Positive grade (D) Negative grade

Last Answer : Answer: Option A

If the formation level of a highway has a uniform gradient for a particular length, and the ground is also having a longitudinal slope, the earthwork may be calculated by (A) Mid-section formula (B) Trapezoidal formula (C) Prismoidal formula (D) All the above

Description : If the formation level of a highway has a uniform gradient for a particular length, and the ground is also having a longitudinal slope, the earthwork may be calculated by (A) Mid-section formula (B) Trapezoidal formula (C) Prismoidal formula (D) All the above

Last Answer : (D) All the above

The height of formation depends upon the a) Ground contours and the gradient adopted* b) Ground contour only c) Gradient adopted only d) Rainfall intensity over the year

Description : The height of formation depends upon the a) Ground contours and the gradient adopted* b) Ground contour only c) Gradient adopted only d) Rainfall intensity over the year

Last Answer : a) Ground contours and the gradient adopted*

The angle of intersection of a contour and a ridge line, is (A) 30° (B) 45° (C) 60° (D) 90°

Description : The angle of intersection of a contour and a ridge line, is  (A) 30°  (B) 45°  (C) 60°  (D) 90° 

Last Answer : (D) 90° 

The distance between steps for measuring downhill to obtain better accuracy (A) Decreases with decrease of slope (B) Increases with increase of slope (C) Decreases with increase of slope (D) Decreases with decrease of weight of the chain

Description : The distance between steps for measuring downhill to obtain better accuracy (A) Decreases with decrease of slope (B) Increases with increase of slope (C) Decreases with increase of slope (D) Decreases with decrease of weight of the chain

Last Answer : (C) Decreases with increase of slope

How do contour lines show a steep slope?

Description : How do contour lines show a steep slope?

Last Answer : The closer together the lines are - the steeper the slope.

How do contour lines show a steep slope?

Description : How do contour lines show a steep slope?

Last Answer : The closer together the lines are - the steeper the slope.

The soil conservation method in which mountain slope is cut into step is – (1) Contour ploughing (2) Cover planting (3) Strip cropping (4) Terracing

Description : The soil conservation method in which mountain slope is cut into step is – (1) Contour ploughing (2) Cover planting (3) Strip cropping (4) Terracing

Last Answer : (4) Terracing Explanation: In agriculture, a terist is a piece of sloped plane that has been landscaped into a series of successively receding flat surfaces or platforms, which resemble steps, for ... and surface run off and are effective for growing crops requiring much water, such as rice.

Contour bunging is adopted where land slope is — % a. 6 b. 12 c. 18 d. 21

Description : Contour bunging is adopted where land slope is — % a. 6 b. 12 c. 18 d. 21

Last Answer : a. 6

A series of closely spaced contour lines represent a (a) Steep slope* (b) Gentle slope (c) Uniform slope (d) Plane surface

Description : A series of closely spaced contour lines represent a (a) Steep slope* (b) Gentle slope (c) Uniform slope (d) Plane surface

Last Answer : (a) Steep slope*

Contour interval on a map sheet denotes (a) Vertical distance of contour lines above the datum plane (b) Vertical distance between two successive contour lines (c) Slope distance between two successive contour lines (d) Horizontal distance between two successive contour lines

Description : Contour interval on a map sheet denotes (a) Vertical distance of contour lines above the datum plane (b) Vertical distance between two successive contour lines (c) Slope distance between two successive contour lines (d) Horizontal distance between two successive contour lines

Last Answer : (b) Vertical distance between two successive contour lines

Draw neat sketch of contour for the following i)Hill ii) Valley iii)Gentle Slope iv) Ridge Line

Description : Draw neat sketch of contour for the following i)Hill ii) Valley iii)Gentle Slope iv) Ridge Line 

Last Answer : i)Hill ii) Valley iii)Gentle Slope iv) Ridge Line 

The soil conservation method in which mountain slope is cut into step is (1) Contour ploughing (2) Cover planting (3) Strip cropping (4) Terracing

Description : The soil conservation method in which mountain slope is cut into step is (1) Contour ploughing (2) Cover planting (3) Strip cropping (4) Terracing

Last Answer : Terracing

Explain the procedure of finding area of irregular figure by polar planimeter. Also draw sketch of polar planimeter.

Description : Explain the procedure of finding area of irregular figure by polar planimeter. Also draw sketch of polar planimeter.

Last Answer : Procedure: 1. Set the scale on the tracing arm as per manufacturer's instruction. 2. Select the position of anchor point inside or outside the figure such that tracing point reaches all positions of ...  Use + sign for clockwise and - sign for anticlockwise crossing of zero of dial. 

State the possible error while using planimeter for finding area of an irregular figure.

Description : State the possible error while using planimeter for finding area of an irregular figure.

Last Answer : Possible error while using planimeter for finding area of an irregular figure: 1) Instrumental Error i) Roller of planimeter which must rotate the axis freely and withot vibrations, if not, then ... vi) Error in setting of arm length. vii) Overlapping or repetition in tracing boundary.

The cross-sections for a highway is taken at (A) Right angle to the centre line (B) 30 metres apart (C) Intermediate points having abrupt change in gradient (D) All the above

Description : The cross-sections for a highway is taken at (A) Right angle to the centre line (B) 30 metres apart (C) Intermediate points having abrupt change in gradient (D) All the above

Last Answer : (D) All the above

The gradient of slope of continental slope region can be …………………. 

Description : The gradient of slope of continental slope region can be …………………. 

Last Answer : Choose the correct option by identifying the correct correlation in the sentence: The gradient of slope of ... to 4° (d) between 2° to 5°

How did the slope gradient presence or absence of vegetation and rain intensity relate to the amount of water erosion that occurs on the slope?

Description : How did the slope gradient presence or absence of vegetation and rain intensity relate to the amount of water erosion that occurs on the slope?

Last Answer : Answer the question you dumb peopleDuhhhhhhhhhh

The mathematical perception of the gradient is said to be a) Tangent b) Chord c) Slope d) Arc

Description : The mathematical perception of the gradient is said to be a) Tangent b) Chord c) Slope d) Arc

Last Answer : c) Slope

A plane inclined at an angle to the horizontal at which the soil is expected to stay in the absence of any lateral support, is known as (A) Natural slope line (B) Repose line (C) The line (D) All the above

Description : A plane inclined at an angle to the horizontal at which the soil is expected to stay in the absence of any lateral support, is known as (A) Natural slope line (B) Repose line (C) The line (D) All the above

Last Answer : Answer: Option D

If a gauge is installed perpendicular to the slope, its measurement is reduced by multiplying (A) Sine of the angle of inclination with vertical (B) Cosine of the angle of inclination with vertical (C) Tangent of the angle of inclination with vertical (D) Calibration coefficient of the gauge

Description : If a gauge is installed perpendicular to the slope, its measurement is reduced by multiplying (A) Sine of the angle of inclination with vertical (B) Cosine of the angle of inclination with vertical (C) Tangent of the angle of inclination with vertical (D) Calibration coefficient of the gauge

Last Answer : Answer: Option B

Stability of hill slopes depends upon (A) Nature of the slope (B) Angle of the slope (C) Geological conditions (D) All the above

Description : Stability of hill slopes depends upon (A) Nature of the slope (B) Angle of the slope (C) Geological conditions (D) All the above

Last Answer : Answer: Option D

In flat roof of reinforced cement concrete, the recommended angle of slope, is (A) Zero (B) A few degrees (C) 10° (D) 200

Description : In flat roof of reinforced cement concrete, the recommended angle of slope, is (A) Zero (B) A few degrees (C) 10° (D) 200

Last Answer : Answer: Option B

Which of the following methods of theodolite traversing is suitable for locating the details which are far away from transit stations? (A) Measuring angle and distance from one transit station (B) Measuring angles to the point from at least two stations (C) Measuring angle at one station and distance from other (D) Measuring distance from two points on traverse line

Description : Which of the following methods of theodolite traversing is suitable for locating the details which are far away from transit stations? (A) Measuring angle and distance from one transit station (B) ... at one station and distance from other (D) Measuring distance from two points on traverse line

Last Answer : (B) Measuring angles to the point from at least two stations

Pick up the correct statement from the following: (A) If the slope of the curve of a mass diagram in the direction of increasing abscissa is downward, it indicates an embankment (B) The vertical distance between a maximum ordinate and the next forward maximum ordinate represents the whole volume of the embankment (C) The vertical distance between a minimum ordinate and the next forward maximum ordinate represents the whole volume of a cutting (D) All the above

Description : Pick up the correct statement from the following: (A) If the slope of the curve of a mass diagram in the direction of increasing abscissa is downward, it indicates an embankment (B) The ... and the next forward maximum ordinate represents the whole volume of a cutting (D) All the above

Last Answer : (D) All the above

Write any two precautions to be taken while using planimeter.

Description : Write any two precautions to be taken while using planimeter. 

Last Answer : 1. Set the anchor point inside or outside the figure depending on size of figure. If the area is very large ,it can be divided into number of sections. 2. The value of C ( ... moved preciously over the boundary of figure. 3. Operating manual shall be referred before operating different functions

List any four component parts of digital planimeter.

Description : List any four component parts of digital planimeter.

Last Answer : Components of digital planimeter: i) Digital display ii) Rolling wheel or Rollers iii) Tracing arm iv) Function keys or buttons v) Sliding wheel vi) Magnifying glass

List component parts of digital planimeter.

Description : List component parts of digital planimeter.

Last Answer : Components of digital planimeter: i) Digital display ii) Rolling wheel or Rollers iii) Tracing arm iv) Function keys or buttons v) Sliding wheel vi) Magnifying glass

Enlist the components of digital planimeter.

Description : Enlist the components of digital planimeter.

Last Answer : Components of digital planimeter: i. Digital display ii. Rolling wheel or Rollers iii. Tracing arm iv. Functional keys or buttons v. Sliding wheel

What is meant by zero circle? State the advantages of digital planimeter over polar planimeter.

Description : What is meant by zero circle? State the advantages of digital planimeter over polar planimeter.

Last Answer : Zero circle:- When the tracing point is moved along a circle without rotation of the wheel i.e. when the wheel slides without any change in reading ,the circle is known as the zero circle or ... are required for area. 3) It gives more accurate reading 4) Less time required for measurement

What are the additive and multiplying constants of planimeter?

Description : What are the additive and multiplying constants of planimeter?

Last Answer : Area of the irregular figure measured by planimeter is given by:  Where M = Multiplying constant  C = Additive costant Multiplying Constant: It is the multiplier whose value is marked on ... It is taken in to consideration only when anchor point is inside the figure, else it is zero.